Fault detection for a class of network‐based nonlinear systems with communication constraints and random packet dropouts

This paper is dealt with the fault detection (FD) problem for a class of network‐based nonlinear systems with communication constraints and random packet dropouts. The plant is described by a Takagi–Sugeno fuzzy time‐delay model, it has multiple sensors and only one of them is actually communicated with the FD filter at each transmission instant, and the packet dropouts occur randomly. The goal is to design a FD filter such that, for all unknown inputs, control inputs, time delays and incomplete data conditions, the estimation error between the residual and ‘fault’ (or, more generally, the weighted fault) is minimized. By casting the addressed FD problem into an auxiliary H_∞ filtering problem of a stochastic switched fuzzy time‐delay system, a sufficient condition for the existence of the desired FD filter is established in terms of linear matrix inequalities. A numerical example is provided to illustrate the effectiveness and applicability of the proposed technique. Copyright © 2011 John Wiley & Sons, Ltd.     

Fault detection for a class of nonlinear networked control systems

In this paper, an observer‐based fault detection (FD) method is presented for a class of nonlinear networked control systems (NCSs) with Markov transfer delays. Firstly, based on Euler approximate method, a nonlinear NCS model with uncertainty is proposed using the Takagi‐Sugeno (T‐S) fuzzy model. Some geometric conditions are given to transfer the NCS model into an output‐feedback form. Then, the H_∞ FD observer is designed such that the estimation error (residual) converges to zero, if there exist no fault and uncertainty in the system, or the residual is minimized in the sense of H_∞ norm, when system contains fault and uncertainties. Furthermore, to simplify the model, the approximate model without uncertainty is considered. Then, sufficient conditions for the existence of FD observer gain and the sampling time of NCSs are given to achieve the semiglobal practical property. An inverted pendulum example is used to illustrate the efficiency of the developed techniques. Copyright © 2009 John Wiley & Sons, Ltd.     

Robust weighted H∞ filtering for networked systems with intermittent measurements of multiple sensors

In this paper, we investigate the robust weighted H_∞ filtering problem for networked systems with intermittent measurements under the discrete‐time framework. Multiple outputs of the plant are measured by separate sensors, each of which has a specific failure rate. Network‐induced delay, packet dropouts and network‐induced disorder phenomena are all incorporated in the modeling of the network link. The resulting closed‐loop system involves both delayed noise and non‐delayed noise. In order to make full use of the delayed information, we define a weighted H_∞ performance index. Sufficient delay‐dependent and parameter‐dependent conditions for the existence of the filter and the solvability of the addressed problem are given via a set of linear matrix inequalities. Two simulation examples are presented to illustrate the relationship between the minimal performance level and the weighting factor, which show the effectiveness of the proposed method. Copyright © 2010 John Wiley & Sons, Ltd.     

Reliable H∞ filtering for discrete time‐delay Markovian jump systems with partly unknown transition probabilities

In this paper, the reliable H_∞ filtering problem is studied for a class of discrete nonlinear Markovian jump systems with sensor failures and time delays. The transition probabilities of the jumping process are assumed to be partly unknown. The failures of sensors are quantified by a variable taking values in a given interval. The time‐varying delay is unknown with given lower and upper bounds. The purpose of the addressed reliable H_∞ filtering problem is to design a mode‐dependent filter such that the filtering error dynamics is asymptotically mean‐square stable and also achieves a prescribed H_∞ performance level. By using a new Lyapunov–Krasovskii functional and delay‐partitioning technique, sufficient delay‐dependent conditions for the existence of such a filter are obtained. The filter gains are characterized in terms of the solution to a convex optimization problem that can be easily solved by using the semi‐definite programme method. A numerical example is provided to demonstrate the effectiveness of the proposed design approach. Copyright © 2011 John Wiley & Sons, Ltd.     

Fault detection filter design for discrete‐time switched linear systems with mode‐dependent average dwell‐time

This paper is concerned with the problem of the fault detection (FD) filter design for discrete‐time switched linear systems with mode‐dependent average dwell‐time. The switching law is mode‐dependent and each subsystem has its own average dwell‐time. The FD filters are designed such that the augmented switched systems are asymptotically stable, and the residual signal generated by the filters achieves a weighted l₂‐gain for some disturbances and guarantees an H _? performance for the fault. By the aid of multiple Lyapunov functions combined with projection lemma, sufficient conditions for the design of the FD filters are formulated by linear matrix inequalities, furthermore, the filters gains are characterized in terms of the solution of a convex optimization problem. Finally, an application to boost convertor is given to illustrate the effectiveness and the applicability of the proposed design method. Copyright © 2013 John Wiley & Sons, Ltd.     

网络控制系统故障检测与诊断的研究与进展

网络控制系统（Networked Control Systems：NCSs）是指控制系统信息经由网络传输的控制系统。NCSs的故障检测与诊断（Fault Detection and Diagnosis,FDD）是保障系统安全稳定运行的关键技术之一。而网络将其优势带人控制系统的同时,也带来了时延、丢包等网络传输问题,这些问题给NCSs的控制和故障检测与诊断带来了新的困难。在总结了现阶段NCSs故障检测与诊断中处理网络诱导时延、丢包、不确定性以及系统非线性的理论和方法的研究成果后,并对今后研究提出了展望。     

Passivity‐based parameterized adaptive disturbance attenuation controller design for switched polynomial nonlinear systems

This paper is concerned with the adaptive disturbance attenuation control problem for a class of switched polynomial nonlinear systems. At first, a parameterized controller is designed to transform the switched polynomial nonlinear systems into switched Hamiltonian systems with polynomial structure. Then, combining with the solve‐parameter algorithm described in this paper, a mixed adaptive passivity and H₂/H_∞ control method is devoted. Comparing with the existing results, the obtained adaptive disturbance attenuation controller has better performance. Finally, a numerical example is given to illustrate the effectiveness of the proposed methods.     

Delay‐dependent robust L2–L∞ filtering of T‐S fuzzy systems with time‐varying delays

This paper considers the problem of robust delay‐dependent L₂–L_∞ filtering for a class of Takagi–Sugeno fuzzy systems with time‐varying delays. The purpose is to design a fuzzy filter such that both the robust stability and a prescribed L₂–L_∞ performance level of the filtering error system are guaranteed. A delay‐dependent sufficient condition for the solvability of the problem is obtained and a linear matrix inequality (LMI) approach is developed. A desired filter can be constructed by solving a set of LMIs. Copyright © 2009 John Wiley & Sons, Ltd.     

Central suboptimal H∞ filter design for nonlinear polynomial systems

This paper presents the central finite‐dimensional H_∞ filter for nonlinear polynomial systems, which is suboptimal for a given threshold γ with respect to a modified Bolza–Meyer quadratic criterion including the attenuation control term with the opposite sign. In contrast to the previously obtained results, the paper reduces the original H_∞ filtering problem to the corresponding optimal H₂ filtering problem, using the technique proposed in (IEEE Trans. Automat. Control 1989; 34 :831–847). The paper presents the central suboptimal H_∞ filter for the general case of nonlinear polynomial systems based on the optimal H₂ filter given in (Int. J. Robust Nonlinear Control 2006; 16 :287–298). The central suboptimal H_∞ filter is also derived in a closed finite‐dimensional form for third (and less) degree polynomial system states. Numerical simulations are conducted to verify performance of the designed central suboptimal filter for nonlinear polynomial systems against the central suboptimal H_∞ filter available for the corresponding linearized system. Copyright © 2008 John Wiley & Sons, Ltd.     

Robust H ∞ filtering for a class of uncertain stochastic hybrid neutral systems with time‐varying delay

This paper is devoted to the problem of robust H _∞ filtering for a class of uncertain switched neutral systems subject to stochastic disturbance and time‐varying delay. Attention is focused on the design of a full‐order switched filter such that the filtering error system is robust mean‐square exponentially stable with a prescribed weighted H _∞ performance. On the basis of the average dwell time approach and the piecewise Lyapunov function technique, sufficient conditions for the solvability of this problem are obtained in terms of linear matrix inequalities. Then, by solving the corresponding linear matrix inequalities, the desired full‐order switched filter is derived for all admissible uncertainties, time‐varying delay, and stochastic disturbances. A numerical example is given to illustrate the effectiveness of the proposed method. Copyright © 2012 John Wiley & Sons, Ltd.     

Robust controller design for large interconnected power systems with model uncertainties based on wide-area measurement

Recently the controller using wide-area measurement systems (WAMS) signals has been suggested to accommodate the dynamic performances of large interconnected power systems. However, there is an unavoidable delay before the wide-area signals are received at the controller site. Therefore, a delay-independent robust control problem of large interconnected power systems is studied via H _∞ fuzzy control method based on wide-area measurement. First, a set of equivalent Takagi–Sugeno (T–S) fuzzy model is adopted to represent the nonlinear large interconnected power system. A wide-area state feedback decentralized H _∞ fuzzy control scheme is developed to override the various disturbances, solve the effect of model uncertainties and stabilize the large power system. The H _∞ decentralized control problem is parameterized in terms of a linear matrix inequality (LMI) problem, and the LMI problem can be solved efficiently using convex optimization techniques. Finally, the effectiveness of the proposed controller design methodology is demonstrated through simulation example. This work is supported by the National Science Foundation of China under grant 60374039, 60404007.     

H∞ filtering for continuous‐time singular systems with time‐varying delay

This paper focuses on H_∞ filter design for continuous‐time singular systems with time‐varying delay. A delay‐dependent H_∞ performance analysis result is first established for error systems via a novel estimation method. By combining a well‐known inequality with a delay partition technique, the upper bound of the derivative of the Lyapunov functional is estimated more tightly and expressed as a convex combination with respect to the reciprocal of the delay rather than the delay. Based on the derived H_∞ performance analysis results, a regular and impulse‐free H_∞ filter is designed in terms of linear matrix inequalities (LMIs). A numerical example is given to demonstrate the merits of the proposed method. Copyright © 2010 John Wiley & Sons, Ltd.     

Adaptive robust H∞ state feedback control for linear uncertain systems with time‐varying delay

This paper considers the problem of adaptive robust H_∞ state feedback control for linear uncertain systems with time‐varying delay. The uncertainties are assumed to be time varying, unknown, but bounded. A new adaptive robust H_∞ controller is presented, whose gains are updating automatically according to the online estimates of uncertain parameters. By combining an indirect adaptive control method and a linear matrix inequality method, sufficient conditions with less conservativeness than those of the corresponding controller with fixed gains are given to guarantee robust asymptotic stability and H_∞ performance of the closed‐loop systems. A numerical example and its simulation results are given to demonstrate the effectiveness and the benefits of the proposed method. Copyright © 2008 John Wiley & Sons, Ltd.     

Free‐weighting matrices‐based robust wide‐area FACTS control design with considering signal time delay for stability enhancement of power systems

This paper presents a free‐weighting matrix (FWM) method based on linear control design approach for the wide‐area robust damping (WARD) controller associated with flexible AC transmission system (FACTS) device to improve the dynamical performance of the large‐scale power systems. First, the linearized reduced‐order plant model is established, which efficiently considers the time delay of the remote feedback signals transmitted by wide‐area measurement systems. Then, based on the robust control theory, the design of the FACTS‐WARD controller is formulated as the standard control problem on delay‐dependent state‐feedback robust control, which is described by a set of linear matrix inequality constraints. Furthermore, in order to obtain the optimal control parameters that can endure the maximum time delay, a FWM approach is proposed to solve the time‐dependent problem of the time‐delay system. Meanwhile, an iterative algorithm based on cone complementary linearization is presented to search out the optimal control parameters. Finally, the nonlinear simulations on the 2‐area 4‐machine and the 5‐area 16‐machine test systems are performed, to evaluate the control performance of the proposed robust wide‐area time‐delay control approach. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Quantized H∞ filtering for state‐delayed systems with finite frequency specifications

This paper presents a novel design approach for the finite frequency (FF) H_∞ filtering problem for discrete‐time state‐delayed systems with quantized measurements. The system state and output are assumed affected by FF external noises. Attention is focused on the design of a stable filter that guarantees the stability and a prescribed ?₂ gain performance level for the filtering error system in the FF domain of input noises. Sufficient conditions for the solvability of this problem are developed by choosing an appropriate Lyapunov‐Krasovskii functional based on the delay partitioning technique and using the FF ?₂ gain definition combined with the generalized S‐procedure. Then, by means of Finsler's lemma, the derived conditions are linearized and additional slack variables are further introduced to more flexible result. Final filter design conditions are consequently established in terms of linear matrix inequalities in three different frequency ranges, ie, low‐, middle‐ and high‐frequency range. Finally, a simulation example is presented to illustrate the effectiveness and the merits of the proposed approach.     

H∞ filtering of discrete-time interconnected systems with failed interconnections

The H_∞ filtering problem for interconnected systems is addressed in this paper. In order to facilitate the stability analysis of interconnected systems under the conditions of failed interconnections, a strategy related to switched systems is introduced. Assume that the interconnections among these subsystems disconnect based on the mode-dependent average dwell time (MDADT), a switching signal is implemented to denote the failed interconnections cases. In the aid of the MDADT method, a filter is designed such that the fault detection (FD) system is asymptotically stable and satisfies the weighted H_∞ performance. Finally, a numerical simulation is provided to show the effectiveness of the proposed filter.     

Robust fault tolerant control for a class of networked control systems with state delay and stochastic actuator failures

This paper is concerned with the robust fault tolerant controller design of networked control systems (NCSs) with state delay and stochastic actuator failures. By utilizing the input delay approach, an equivalent continuous‐time generalized time delay system in both state and input is obtained. By applying a delay decomposition approach, the information of the delayed plant states can be taken into full consideration, and new delay‐dependent sufficient conditions that ensure the asymptotic mean‐square stability of NCSs with stochastic actuator failures are derived in terms of linear matrix inequalities (LMIs). It is realized by employing a new Lyapunov–Krasovskii function in the decomposed integral intervals and directly handle the inversely weighted convex combination of quadratic terms of integral quantities with reciprocally convex combination technique. Moreover, the proposed approach involves neither slack variable nor any model transformation. A numerical example is provided to demonstrate the effectiveness and less conservatism of the proposed method.Copyright © 2012 John Wiley & Sons, Ltd.     

Network‐based fault detection for discrete‐time state‐delay systems: A new measurement model

In this paper, the fault detection problem is studied for a class of discrete‐time networked systems with multiple state delays and unknown input. A new measurement model is proposed to account for both the random measurement delays and the stochastic data missing (package dropout) phenomenon, which are typically resulted from the limited capacity of the communication networks. At any time point, one of the following cases (random events) occurs: measurement missing case, no time‐delay case, one‐step delay case, two‐step delay case, …, q‐step delay case. The probabilistic switching between different cases is assumed to obey a homogeneous Markovian chain. We aim to design a fault detection filter such that, for all unknown input and incomplete measurements, the error between the residual and weighted faults is made as small as possible. The addressed fault detection problem is first converted into an auxiliary H_∞ filtering problem for a certain Markovian jumping system (MJS). Then, with the help of the bounded real lemma of MJSs, a sufficient condition for the existence of the desired fault detection filter is established in terms of a set of linear matrix inequalities (LMIs). A simulation example is provided to illustrate the effectiveness and applicability of the proposed techniques. Copyright © 2007 John Wiley & Sons, Ltd.     

Adaptive sliding mode control for fuzzy singular systems with time delay and input nonlinearity

This paper addresses the sliding mode control problem for a class of uncertain Takagi‐Sugeno fuzzy singular systems with state delay and subject to input nonlinearity. Our purpose is focused on designing an adaptive sliding mode controller for such a complex system. First, a new fuzzy integral‐type sliding function is designed. Then, an adaptive sliding mode control scheme is established such that the resulting closed‐loop system is insensitive to all admissible uncertainties and satisfies the reaching condition. Moreover, delay‐dependent sufficient conditions are derived such that the admissibility and the L₂‐L_∞ performance requirement of the sliding mode dynamics can be guaranteed in the presence of time delays, external disturbances, and sector nonlinearity input. Finally, the validity and applicability of the proposed theory are illustrated by a numerical example.     

Multi‐objective optimization power control for code division multiple access systems

In code division multiple access (CDMA) communication systems, the communication channel is usually corrupted with time‐varying interferences, which include channel fading, multiple access interference, round‐trip delay, and noise. Power control is an important issue for CDMA systems to achieve higher communication link quality and better system capacity under time‐varying interferences. In the previous studies, most of power control algorithms only considered the user's target signal‐to‐interference‐and‐noise‐ratio (SINR) to maintain quality of service. In this study, a multi‐objective optimization method is proposed for power control design in CDMA systems. With a shadow system and an h _∞ filter to compensate for the round‐trip delay, the proposed power control scheme can simply adjust transmission power to achieve the best compromise between several objectives, such as minimization of SINR deviation, minimization of power consumption, and minimization of the system outage. Several simulation results are given to confirm the performance of the proposed power control scheme. Copyright © 2013 John Wiley & Sons, Ltd.