Photografting of N‐isopropylacrylamide on polyethylene film in mixed solvents composed of water and organic solvent

The effects of a mixed solvent consisting of water and organic solvents such as acetone and methanol on the photografting (λ > 300 nm) of N‐isopropylacrylamide (NIPAAm) on linear low‐density polyethylene film (thickness = 30 μm) was investigated at 30°C and 60°C. Xanthone, which had been coated on the film, was used as a photoinitiator. The photografting initiated even in the system at 30°C by using a longer irradiation time. It was found that the maximum percentage of grafting was attained at a certain concentration of organic solvent in the mixed solvent, which shifted to a lower concentration of organic solvent in the system at 60°C compared with the system at 30°C. It was found that the grafted chains of the sample prepared in the system with the higher polymerization temperature and the use of mixed solvent penetrated into the center of the film compared with the sample prepared in the system with the lower polymerization temperature and use of a water solvent. Moreover, the NIPAAm‐grafted films exhibited temperature responsiveness, swelling and shrinking in water at 0°C and 50°C, respectively. The extent of this characteristic was found to be closely related to the location of the grafted chains in film substrate, which was measured by an attenuated total reflection infrared spectroscope and a scanning electron microscope. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 458–463, 2003     

Photografting of methacrylic acid on polyethylene film: Effect of mixed solvents consisting of water and organic solvent

Photografting of methacrylic acid (MAA) on linear low‐density polyethylene film (thickness = 30 μm) was investigated at 60°C in mixed solvents consisting of water and organic solvent with xanthone as the photoiniator. The organic solvents examined were acetone, methanol, tetrahydrofuran, and dioxane. A maximum percentage of grafting was observed at a certain concentration of organic solvent in the mixed solvent, depending on the nature of the organic solvent. Distribution of the grafted chains in the resultant MAA‐grafted film, which was examined by scanning electron microscopy and attenuated total‐reflection IR spectroscopy, was largely influenced by the use of the mixed solvent. The grafted samples swelled in the alkaline region and shrank in acidic medium, showing a pH‐responsive character. The extent of the pH‐responsive function was closely related to the location of grafted chains, which could be controlled by proper choice of the composition of organic solvent in the mixed solvent. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2454–2461, 2002     

Photografting of N‐isopropylacrylamide and glycidyl methacrylate binary monomers on polyethylene film: Effect of mixed solvent consisting of water and organic solvent

Photografting (λ > 300 nm) of N‐isopropylacrylamide (NIPAAm) and glycidyl methacrylate (GMA) binary monomers (NIPAAm/GMA) on low‐density polyethylene film (thickness = 30 μm) was investigated at 60°C using mixed solvent consisting of water and an organic solvent such as acetone. Xanthone was used as a photoinitiator by coating it on the film surfaces. A maximum percentage of grafting was observed at a certain concentration of acetone in the mixed solvent, which was commonly observed for both ratios of NIPAAm/GMA, 8/2 and 7/3. Based on the photografting of NIPAAm/GMA on xanthone‐coated film, monomer reactivity ratios of NIPAAm (r₁) and GMA (r₂) were calculated using the Fineman–Ross method. The values were 0.31 ± 0.1 and 4.8 ± 0.2 for the water solvent system, while they were 0.96 ± 0.1 and 4.9 ± 0.1 for the mixed solvent system. NIPAAm/GMA‐grafted films with a homogeneous distribution of grafted chains were formed by photografting using water and mixed solvents. The NIPAAm/GMA‐grafted films exhibited temperature‐responsive characters, whereas the grafted films showed a reversible change in the degree of swelling between 0 and 50°C, respectively. Epoxy groups in the grafted poly(NIPAAm/GMA) chains could be aminated with ethylenediamine in N,N′‐dimethylformamide at 70°C for 3 h. Complexes of the aminated NIPAAm/GMA‐grafted chains with cupric ion exhibited catalytic activity for the decomposition of hydrogen peroxide at 20 to 50°C. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2469–2475, 2005     

Effect of hydroquinone on location of methacrylic acid-grafted chains introduced into polyethylene film by photografting

Effect of hydroquinone (HQ) on photografting of methacrylic acid (MAA) on low-density polyethylene film (thickness = 30 μm) sensitized with xanthone was investigated at 60°C in water medium. Both the formation of grafted polymer and homopolymer were retarded by HQ. The contact angle of water on the MAA-grafted polyethylene films (sample with HQ) prepared in the system with HQ was larger than that of the grafted films (sample without HQ) prepared in the system without HQ. Based on electron probe microanalysis of the grafted films, it was found that distribution of grafted chains in the direction of film thickness is different between the both grafted films. Namely, the grafted chains of the sample with HQ distributed in the inside of the film compared with those of the sample without HQ. The difference in the distribution of grafted chains between the grafting systems with and without HQ was discussed in terms of effect of HQ on the photodecomposition of MAA-grafted chains and the subsequent initiation of polymerization by radicals due to the photodecomposition.     

Aliphatic ketones/water/alcohol as a new photoinitiating system for the photografting of methacrylic acid onto high-density polyethylene

The photografting of methacrylic acid (MAA) onto high-density polyethylene (HDPE) initiated by aliphatic ketones, butanone, pentanone, heptanone, etc. has been reported. When these ketones were used alone or just with ethanol, grafting did not occur. However, grafting took place when a proper butanone/water/ethanol mixed solvent was used. When the volume ratio of butanone was fixed, the grafting of MAA onto HDPE became easier with an increase in the volume ratio of water. The grafting of MAA onto HDPE became easier and faster with a decrease in the volume ratio of butanone. The grafting rate increased with the increase of monomer concentration. The nature of the alcohol also affected the self-initiation by aliphatic ketone; ethanol was found to be better than methanol. Possibly, hydrogen bond formed between aliphatic ketone and water increases the energy and lifetime of the excited state of the ketone, permitting it to act as a grafting and polymerisation initiator. FTIR characterization of the grafted samples proves the successful grafting of MAA onto HDPE. The water absorbency of the grafted samples increased almost linearly with the extent of grafting both in air and in water. The PE films grafted in the butanone/water/ethanol solvent adsorbed approximately 30-40 mass% water per p-MAA.     

Photografting of acrylamide on ethylene–vinyl alcohol copolymer film

Photografting (λ > 300nm) of acrylamide on ethylene-vinyl alcohol copolymer film (vinyl alcohol unit = 56 mol%, film thickness = 20μm) was investigated at 60°C in water medium, where photoinitiators were coated on the film earlier. The percent grafting decreased in the order of xanthone ≈ benzophenone > anthraquinone > benzoyl peroxide. The graft efficiencies in each sensitized system were less than 30%, showing a predominant formation of homopolymer. Grafting of acrylamide on the film was also initiated in systems with and without photoirradiation when ceric salt was used as an initiator. Based on electron probe microanalysis of the grafted films, the grafted chains of the sample prepared by photografting were distributed inside the film, while those of the sample prepared by ceric salt-initiated grafting without photoirradiation were located mainly on the film surface. The grafted films prepared by the former system exhibited a higher moisture permeability than those prepared by the latter system.     

Surface photografting initiated by benzophenone in water and mixed solvents containing water and ethanol

Photografting reactions are usually carried out in organic solvents due to the water insoluble nature of photoinitiators such as benzophenone (BP). This work reports the effect of water and mixed solvents containing water and ethanol on the surface photografting of methacrylic acid (MAA) onto polyethylene initiated by BP. The percent grafting increased with the increase of water volume ratio in the mixed solvent, and BP showed the highest photoinitiation efficiency when dissolved in pure water solvent. Effects of BP concentration, monomer concentration, and monomer type on photografting were studied. The percent grafting showed the maximum at a lower BP concentration (0.20 mol/mol %) in pure water solvent than that (0.60 mol/mol %) in the mixed solvent with 90 v/v % water. The percent grafting first increased with the increase of monomer concentration till 3 mol L^?1 and then decreased. Acrylic acid (AA) could also be photografted onto polyethylene by BP in the mixed solvents. UV–visible spectroscopic examinations revealed that the λ_max of π–π* transitions of BP red shifted as the increase of the water volume ratio, i.e., the polarity of the solvent. The excitation of BP in solvents with a higher polarity under UV irradiation requires less energy, so the photografting initiated by BP is easier to occur. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Photografting of methyl methacrylate onto high‐density polyethylene initiated by aliphatic ketones

The photografting of a water‐insoluble monomer methyl methacrylate (MMA) onto high‐density polyethylene (HDPE) initiated by an aliphatic ketone/water/alcohol initiating system has been reported. The aliphatic ketones, such as acetone, butanone, and cyclohexanone, could effectively initiate the grafting reaction when they were mixed with water and ethanol to form homogeneous aliphatic ketone/water/ethanol mixed solvents that could dissolve the water‐insoluble monomer. The nature of aliphatic ketone affected the grafting; at the same aliphatic ketone/water/ethanol volume ratio, the grafting system containing acetone or butanone always led to a higher extent of grafting than that containing cyclohexanone. Water also played a very important role in the grafting reaction; in the tested range, the rate of formation of grafted PMMA on HDPE increased with the increase of water : volume ratio. The grafting of MMA carried out in 5 acetone/40 water/55 ethanol mixed solvent led to the highest extent of grafting. ATR‐FTIR characterizations of the grafted samples proved the successful grafting of MMA onto HDPE. SEM investigations of the HDPE surfaces grafted in different aliphatic ketone/water/ethanol mixed solvents indicate the morphologies of grafted surfaces varied with the mixed solvents used. This study broadened the application fields of the aliphatic ketone/water/alcohol initiating system for photografting. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effect of acid and pH value on the photografting initiated by aliphatic ketones in aqueous solutions

The photografting of methacrylic acid (MAA) onto high‐density polyethylene (HDPE) initiated by aliphatic ketones (acetone, butanone, and cyclohexanone) in aqueous solutions with different pH values adjusted by adding different amount of mineral acids was reported. Acids significantly enhanced the photografting yield, and the extent of grafting generally increased with decreasing pH value. The effect of pH value on the grafting reactions varied with the acid used. The grafting of MAA onto HDPE surface was confirmed with FTIR and SEM characterizations. The water absorbency of the grafted p‐MAA varied with the extent of grafting. When the extent of grafting was less than 2000–3000 μg/cm², grafted p‐MAA absorbed about 25–30% water, whereas at higher extent of grafting, it absorbed about 50% water. The mechanism of the acid enhancement of the photografting of MAA initiated by aliphatic ketones in aqueous solutions is believed to be attributed to the change of the solubility of monomer in the solution and the conformation of grafted chains, both are favorable for accelerating grafting reactions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Vapor phase photografting of methyl methacrylate on polymer films: Accelerating effects of solvent mixed with monomer

The effects of solvent mixed with monomer on benzopheneone-sensitized photografting of methyl methacrylate on polymer films were investigated in vapor phase at 60°C. The grafting on nylon 6 film was promoted by adding a pertinent quantity of solvent, such as phenol, m-cresol, benzyl alcohol, and formic acid, to the monomer. The similar effects accelerating the grafting on polyester film were observed for solvent, such as m-cresol, phenol, o-chlorophenol, and nitrobenzene. Such an accelerating function of the solvents is supposed to originate in the swelling of the film substrates due to solvents. On the other hand, solvents such as n-decane, decalin, and p-xylene retarded the grafting on low density polyethylene and polypropylene films. The differences in the solvent effects by the types of film substrates are discussed in terms of photoinduced radicals on the substrates containing solvents.     

Characteristics of methacrylic acid‐grafted polyethylene films prepared by photografting in the presence of polyfunctional monomers

Photografting of methacrylic acid (MAA) on low‐density polyethylene film (thickness = 30 μm), on which xanthone photoinitiator was coated earlier, in the presence of polyfunctional monomers such as N,N′‐methylenebisacrylamide, ethylene glycol dimethacrylate, and trimethylol propane triacrylate was examined at 60°C in water/acetone (3:1 v/v) mixture solvent. The photografting was retarded at the earlier stage of polymerization, and then accelerated when small amounts of the polyfunctional monomers (1–3 mol % of MAA monomer used) were added to the system. Addition of the polyfunctional monomers did not affect distribution of the grafted chains in the cross section of the resultant MAA‐grafted PE film, which was measured by electron probe microanalysis. The MAA‐grafted samples were subjected to adsorption of cupric ions at 25°C for 24 h in the system of pH = 5. The adsorption was considerably suppressed for the grafted samples prepared at the earlier stage of polymerization in the system with the polyfunctional monomers. The phenomenon was discussed in terms of the formation of crosslinked and branched structures in the MAA‐grafted chains depending on the polymerization stage in the system with polyfunctional monomers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1262–1268, 2006     

Surface photografting polymerization of vinyl acetate,maleic anhydride,and their charge‐transfer complex. IV. Maleic anhydride

In general, it has been accepted that maleic anhydride (MAH) cannot be homopolymerized under normal conditions. However, MAH can be grafted onto substrates under UV irradiation rather easily. In this study, the photografting polymerization of MAH was examined with low‐density polyethylene (LDPE) film as a substrate. The initiating performances of different photoinitiators, including benzophenone (BP), Irgacure 651, and benzoyl peroxide (BPO), were examined. The effects of some principal factors, such as the temperature, solvent, and UV intensity, on the grafting polymerization of MAH were also investigated. The results show that MAH can be smoothly grafted onto LDPE film by UV radiation. Enhancing the intensity of UV radiation and elevating the irradiation temperature facilitate the grafting polymerization of MAH. Among BP, Irgacure 651, and BPO, Irgacure 651 can initiate the polymerization of more MAH, but BP is more effective for the initiation of surface grafting polymerization. Solvents of MAH also have a great influence on the grafting polymerization; some of them even seem to take part in the reaction. The occurrence of photografting polymerization was verified with Fourier transform infrared and electron spectroscopy for chemical analysis spectra. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2318–2325, 2003     

Photografting of acrylonitrile and methacrylic acid on polyethylene film under air atmosphere

Photografting of acrylonitrile (AN) and methacrylic acid (MAA) on low-density polyethylene film (thickness 70 μm), on which benzophenone was coated earlier, was investigated at 60°C in water medium under air atmosphere. In the case of AN monomer, where grafted polymer was formed predominantly, oxygen in the system promoted the formation of both grafted polymer and homopolymer. With MAA monomer, in which homopolymer was formed preferentially compared to the formation of grafted polymer, the formation of homopolymer was accelerated by the presence of oxygen while suppressing that of grafted polymer. The formation of polyethylene peroxides by photoirradiation seemed to be a factor for the accelerated polymerization under air atmosphere. It was found that additives such as hydrazine and metallic ions (Fe²⁺, Cu²⁺, and Ni²⁺) are useful for enhancing the photografting under air atmosphere. © 1993 John Wiley & Sons, Inc.     

Reactivity of glycidyl methacrylate grafted cellulose film prepared by grafting under ultrasonic irradiation

Ultrasonic irradiation largely accelerated ceric salt initiated grafting of glycidyl methacrylate (GMA) on regenerated cellulose film (cellophane thickness = 20 μm) at 60°C in air. The grafting under ultrasonic irradiation was characterized by a higher percent of grafting and graft efficiency and a lower density of GMA‐grafted chains in the surface layer of the grafted films compared to the unirradiated system, which was obtained by attenuated total reflectance IR measurements. The grafted films were subjected to amination with ethylenediamine (En) at 70°C for 3 h in N,N‐dimethylformamide. The amount of epoxy groups in the grafted films, which participated in the reaction with En, reached about 50–60 mol % and was slightly lower for the grafted film prepared in the irradiated system than that prepared in the unirradiated one. Adsorption of cupric ions with the aminated samples was performed at pH 5.0 using Clark–Lubs buffer solution and cupric chloride. The adsorption was extremely retarded for the aminated sample prepared using the unirradiated sample compared to that prepared using the irradiated one. The retarded adsorption phenomenon is discussed in terms of a larger formation of crosslinked structures on the surface layer of the former sample during the amination. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2462–2469, 1999     

Solvent effects in the polyethylene terephthalate surface modification by cold argon plasma‐induced grafting polymerization of methacrylic acid

We studied the surface modification of polyethylene terephthalate (PET) by grafting with methacrylic acid (MAA) through plasma‐induced polymerization method. The results show that the grafting yield increases with the increase of reaction temperature. The grafting yield is in proportion to the increase of monomer concentration. The grafting yield increases along with the prolonging of reaction time. The solvent has great influence to the grafting reaction. The grafting yield increases with the increase of volume ratio R, which is defined by the volume of water to the volume of alcohol, when using alcohol and water as mixed solvent. The grafting yield is not zero when only using methanol, ethanol or isopropanol as the solvent. The red shift in UV spectrum could be ascribed to different reactive activities of MAA in different solvents, which also can explain the change trend of the grafting yield. The UV‐vis absorbance difference and the FTIR integrated peak area of the C?O stretching increase steadily with the increase of grafting yield, which are almost linear relationship. It was confirmed that MAA was grafted onto the PET surface in terms of UV‐vis spectrophotometric, FTIR and atomic force microscopy analysis. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Atomic force microscopy study of the photografting of glycidyl methacrylate onto HDPE and the microstructure of the grafted chains

This article presents an atomic force microscopy (AFM) study of the initial stage of the photografting of glycidyl methacrylate (GMA) onto high-density polyethylene (HDPE) surface and the microstructure of the grafted chains. The grafting was carried out in acetone, dichloromethane and tetrahydrofuran (THF), as well as without solvent. Granular structures were found on the surface of the samples grafted in the solvents. The height of the granules increased linearly with their diameter. Each granule was thought to be a single grafted chain with a highly branched (or superbranched) microstructure. The grafting density on HDPE was quite small when the grafting was carried out in the solvents. The grafted chains were more branched when grafting was carried out in THF than when the grafting was carried out in acetone and dichloromethane. The bulk (no solvent) grafting of GMA onto HDPE was much faster and more uniform than that carried out in the solvents. The thickness of the bulk grafted materials was a few nanometers after 30 s irradiation, and possibly, the grafting density was much higher and the grafted polymers were much less branched than those produced in solvent.     

Photografting of methacrylic acid onto HDPE initiated by acetaldehyde in aqueous solutions

Acetaldehyde could act as a very effective photoinitiator for water‐borne photografting. The photografting of methacrylic acid (MAA) onto polyethylene initiated by acetaldehyde in aqueous solutions was reported. Acetaldehyde had higher photoinitiation efficiency than acetone and formaldehyde. The extent of grafting varied with the acetaldehyde content in the solution and it showed the maximum when the content of acetaldehyde was about 10 w/w %. The extent of grafting firstly increased with the increase of monomer concentration till 2 mol/L and then kept constant or slightly decreased. ATR‐FTIR characterizations of the grafted samples proved the successful grafting of MAA onto PE, and the calculated carbonyl indexes were in accord with the results obtained by the gravimetric method. The water absorbency of the grafted samples increased almost linearly with the extent of grafting. The difference in the photoinitiation efficiencies of acetaldehyde, acetone and formaldehyde was discussed through their differences in the n‐π* transitions in water and the photoinitiation process. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Temperature‐sensitive membranes prepared by the plasma‐induced graft polymerization of N‐Isopropylacrylamide into porous polyethylene membranes

A temperature‐responsive polymer, poly(N‐isopropylacrylamide) (PNIPAAm), was grafted onto porous polyethylene membranes by a plasma‐induced graft polymerization technique. A wide range of grafting was achieved through variations in the grafting conditions, including the postpolymerization temperature, time, monomer concentration, and graft‐reaction medium. The active species induced by plasma treatment was proven to be long‐living via a postpolymerization time of 95 h. Different solvent compositions, that is, water, methanol, benzene, and water/methanol, were used as reaction media, and water showed a much higher polymerization rate than the organic solvents. Based on the hydrophilicity of the active species, a mechanism explaining the solvent effect in plasma‐induced graft polymerization was examined. Characterizations by scanning electron microscopy, X‐ray photoelectron spectroscopy (XPS), and micro Fourier transform infrared showed that the grafted polymers were located on both the outer surface and inside pores of the membranes. The XPS analysis also confirmed that the polar amide groups tended to distribute more outward when grafted PNIPAAm was in its expanding state than when it was in its shrinking state. Water permeation experiments showed that the permeability of the grafted membranes varied dramatically with a slight temperature change in the vicinity of the lower critical solution temperature (LCST) of PNIPAAm. The effective pore radii of the grafted membranes above and below the LCST could be depicted by Hagen‐Poiseuille's law. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3180–3187, 2003     

Surface photografting polymerization of trimethylolpropane triacrylate onto LDPE substrate in tetrahydrofuran/water mixtures

A surface photografting polymerization (λ > 300 nm) of a multifunctional monomer which was trimethylolpropane triacrylate (TMPTA), was conducted with benzophenone (BP) as photoinitiator and LDPE as model substrate, in mixed solvents containing tetrahydrofuran (THF) and water. Proved by ATR‐IR, highly crosslinked grafted layer was generated rapidly under UV irradiation. Effects on percent conversion of grafting are detailed with, such as feed ratio of BP to TMPTA, mass percent of TMPTA in the reaction system, mass percent of water in the mixed solvents and addition of the second monomer, methyl methacrylate (MMA). As both verified by SEM and AFM, relatively planar grafted layer was produced when photografting was carried out merely in THF; adding water in the reaction system caused the formation of “craters” in the grafted layer. In addition, effects of mass percent of water in the mixed solvents, UV irradiation time, TMPTA concentration and addition of MMA on the size, shape and quantity of the “craters” were investigated by SEM. A plausible mechanism for the formation of “craters” is also proposed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Photografting polymerization of polyacrylamide on PHBV films (I)

Photografting polymerization of polyacrylamide (PAM) onto poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) films using benzophenone as photoinitiator was studied. The morphology and structure of the grafted PHBV film were characterized by Fourier transformed infrared spectroscopy (FTIR) with attenuated total reflectance (ATR) and scanning electron microscope (SEM) with energy dispersive X‐ray spectrometer (EDX). The grafting percentage and grafting efficiency of the grafted PHBV film went up with the increase of acrylamide concentration and irradiation time. It was observed that photografting polymerization of PAM was not only limited to the film surface, but also in situ occurred inside the film to form the pore microstructure. Sheep bone marrow stromal cell studies showed that MSCs cells attachment efficiency on the grafted PHBV films increased and cells grew well. These results demonstrated the potentiality of PAM‐photografting PHBV in medical applications. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104, 4088–4095, 2007