Synthesis and polymerization of the acrylamide derivatives of fatty compounds

The Ritter reaction of plant oil triglycerides (such as soybean and sunflower oil) with acrylonitrile was used to introduce acrylamide functionality on the triglyceride. Acrylonitrile and triglycerides were reacted in the presence of H₂SO₄, and acrylamide derivatives were obtained in yields of 45 and 50% for sunflower oil and soybean oil, respectively. Radical initiated copolymerization of the acrylamide derivatives of the triglycerides with styrene produced semirigid polymers. Characterization of new monomers and polymers was done by ¹H‐NMR, ¹³C‐NMR, IR, and MS. The swelling behavior of the crosslinked network polymers was determined in different solvents. Glass transiton temperature (T_g) of the cured resin was also determined by differential scanning calorimeter to be 40°C for soybean based polymer and 30°C for sunflower‐based polymer. Homo‐ and copolymerization behavior of acrylamide derivatives of methyl oleate (MOA) and methyl 10‐undecenoate (MUA) were also investigated. The reactivity ratios of these monomers with respect to styrene were determined by the Fineman–Ross method using ¹H‐NMR spectroscopic data. The reactivity ratios were r_sty = 1.776; r_moa = 0512 for MOA, and r_sty = 1.142; r_mua = 0.507 for MUA, respectively. Photopolymerization behaviors of MOA and MUA were also investigated using the photoDSC technique and the rate of polymerization of MUA is higher than that of MOA under the same conditions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2264–2272, 2005     

Synthesis and polymerization of the bromoacrylated plant oil triglycerides to rigid,flame‐retardant polymers

Simultaneous addition of bromine and acrylate to the double bonds of fatty acids in triglycerides was achieved. In the first part of the study, methyl oleate was bromoacrylated in the presence of acrylic acid and N‐bromosuccinimide as a model compound for the application of the reaction to the triglycerides. Next, soybean oil and high oleic sunflower oil were bromoacrylated by using the same procedure. The products were characterized by GC, IR, ¹H‐NMR, ¹³C‐NMR, and mass spectrometry. The bromoacrylation yields for soybean oil and sunflower oil were 75 and 55%, respectively. A rigid thermoset polymer was prepared from the radical copolymerization of bromoacrylated soybean oil with styrene. The bromoacrylated sunflower oil–styrene copolymer showed semirigid properties. The crosslinked network structure of the copolymers was examined by their swelling behavior in different solvents. Glass‐transition temperatures were also determined and soybean oil–based polymer and sunflower oil–based polymer showed a glass transition at 55–65 and 20–30°C, respectively. The storage moduli of the soybean‐based and sunflower‐based polymers at room temperature were approximately 1.0 × 10¹⁰ and 1.1 × 10⁸ Pa, respectively. Photopolymerization was also carried out by using 2,2‐dimethoxy‐2‐phenyl‐acetophenone as initiator. The response of the cured polymers to the thermal energy produced by a small flame was also tested by the ignition respond index method according to ASTM D 3713‐78 and was found to be 5 B at 2.00 mm. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91:2700–2710, 2004     

Photolytic and free‐radical polymerization of monomethyl maleate esters of epoxidized plant oil triglycerides

Epoxidized soybean oil (ESO) was reacted with monomethyl maleate with AMC‐2 catalyst. Monomethyl maleate was found to react with 65% of the available epoxy groups to give the monomethyl maleic esters of ESO (MESO). ¹H‐NMR, ¹³C‐NMR, and IR spectra of the new derivative confirmed the proposed structure. The NMR spectra revealed that the average number of monomethyl maleate groups per triglyceride molecule was 2.6. MESO was photopolymerized with ultraviolet light and was free radically homopolymerized and copolymerized with styrene (STY), vinyl acetate (VA), and methylmethacrylate (MMA). MESO was also reacted with maleic anhydride at the newly formed hydroxyl groups to give maleinized MESO, (MESOMA), which now contained 4.9 maleate unsaturations per triglyceride. Dynamic mechanical analysis revealed the dynamic modulus for styrene copolymers of MESO and maleinized MESO as 105 and 140 MPa, respectively. Both of these plant oil derived monomers are good candidates for a practical and economical liquid molding resin. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 626–633, 2007     

Biobased polyisocyanates from plant oil triglycerides: Synthesis,polymerization, and characterization

In this study, an easy and efficient synthesis of unsaturated plant oil triglycerides having isocyanate groups is reported. In the first step of the synthesis, the triglyceride was brominated at the allylic positions by a reaction with N‐bromosuccinimide, and in the second step, these brominated species were reacted with AgNCO to convert them to isocyanate‐containing triglycerides. At the end of the reaction, approximately 60–70% of the bromine was replaced by NCO groups, and the double bonds of the triglyceride were not consumed. When the amount of AgNCO was increased, the yield also increased. The final products were characterized with IR and ¹H‐NMR, and polyurethanes and polyureas were obtained from these fatty isocyanates with alcohols and amines, respectively. The polymers were characterized by differential scanning calorimetry and thermogravimetric analysis. Differential scanning calorimetry curves showed that glycerin polyurethane showed a glass‐transition temperature at 19°C, castor oil polyurethane showed two glass‐transition temperatures at ?43 and 36°C, and triethylene tetraamine polyurea showed a glass‐transition temperature at 31°C. Some properties of the polymers, such as the tensile strength and swelling ratios, were also determined. The swelling rate of glycerin polyurethane was higher than that of castor oil polyurethane in dichloromethane. The equilibrium swelling ratio was highest for the castor oil polyurethane. The polyurethanes synthesized in this study had a Young's modulus around 50 kPa and a tensile strength around 0.01 N/mm² (100 kPa). The tensile strength of glycerin polyurethane was higher than that of castor oil polyurethane. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Photolytic and free‐radical polymerization of cinnamate esters of epoxidized plant oil triglycerides

Epoxidized soybean oil was reacted with cinnamic acid with triphenyl phosphine as a catalyst. Cinnamic acid reacted with 79% of the available epoxy groups, and this yielded cinnamate esters of epoxidized soybean oil (ESOCA). ¹H‐NMR, IR, and mass spectra of the new cinnamate derivatives confirmed the proposed structure. The mass spectra revealed that the average number of cinnamate groups per triglyceride molecule was 3.33. ESOCA could be photopolymerized with UV light. ESOCA could also be homopolymerized into a soft and insoluble polymer by free‐radical initiation and copolymerized with styrene, vinyl acetate, and methyl methacrylate. A mixture of ESOCA with 25 wt % styrene had a viscosity of 410 cP and could be free‐radically polymerized with benzoyl tert‐butyl peroxide at elevated temperatures. Differential scanning calorimetry confirmed the formation of copolymers. The ESOCA homopolymer and its copolymers all showed a first‐order transition by differential scanning calorimetry around ?1.5°C that was attributable to side‐chain relaxations of the triglyceride fatty acids. The styrene copolymer of ESOCA showed a tan δ peak at 66.6°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3882–3888, 2003     

Rigid,thermosetting liquid molding resins from renewable resources. I. Synthesis and polymerization of soy oil monoglyceride maleates

In this study, rigid thermoset polymers were prepared from radical copolymerization of the soybean oil monoglyceride maleates with styrene. In the first part of the study, soybean oil monoglycerides (SOMGs) were obtained from the reaction of soybean oil with glycerol at 220–240°C with an optimization of the reaction to maximize the monoglyceride yield. In the following step, SOMG were reacted with maleic anhydride at temperatures around 100°C to produce the SOMG maleate half esters. Different catalysts and different reaction conditions were examined to increase the maleate half esters' yields. The reactions were followed by IR and ¹H NMR, and the products were characterized by mass spectrometry. In the final step, the radical initiated copolymerization of the SOMG maleates with styrene produced rigid, thermoset polymers. The emulsion copolymerization of the SOMG maleates with styrene was also carried out successfully without the addition of an emulsifier. The obtained polymers were characterized by IR and the crosslinked network structure of the copolymers was examined with the swelling behavior in different solvents. Mechanical properties of the cured resin such as T_g, dynamic flexural modulus, and surface hardness were also determined. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 69–77, 2001     

Polymerization of epoxidized soybean oil with maleinized polybutadiene

Epoxidized soybean oil (ESO) triglycerides were reacted with maleinized polybutadiene (MMPBD) to give plant‐oil‐based thermoset polymers. MMPBD samples were of two different molecular weights [high‐molecular‐weight maleinized polybutadiene (MMPBD‐H), maleate content = 10%, number‐average molecular weight (M_n) = 9000, and low‐molecular‐weight maleinized polybutadiene (MMPBD‐L), maleate content = 15%, M_n = 5000]. To increase the crosslink density of the product, a free‐radical initiator, benzoyl peroxide, was added to this mixture to further crosslink MMPBD through its double bonds. The characterizations of the products were done by dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, and IR spectroscopy. The ESO–MMPBD polymers were crosslinked rigid infusible polymers. ESO–MMPBD‐H–1 : 1 and ESO–MMPBD‐L–1 : 1 showed glass‐transition temperature values at −23, 78 and −17, 64°C, respectively, whereas the storage moduli of the two polymers at 25°C were 13 and 16 MPa, respectively. The storage moduli of the polymers remained the same or decreased with the addition of a free‐radical initiator. The storage moduli also decreased with increasing ESO concentration above a 1 : 1 epoxy‐to‐anhydride molar ratio. The surface hardness increased dramatically, and the equilibrium swelling ratio decreased with the addition of free‐radical initiator. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Isothiocyanate derivatives of soybean oil triglycerides: Synthesis,characterization, and polymerization with polyols and polyamines

In this article, a novel two step synthesis of soy oil based isothiocyanate is described. Allylicaly brominated soybean oil (ABSO) was reacted first with ammonium thiocyanate in tetrahydro furan to form allylic thiocyanates. These compounds were then converted to isothiocyanated soybean oil (ITSO) by a thermal rearrangement. Conversion was found to be 70%. The structure of the ITSO was characterized by IR and ¹ H‐NMR techniques. Then ITSO was reacted with ethylene glycol, glycerol, and castor oil to produce polythiourethanes and ethylene diamine and triethylene tetra amine to produce polythioureas. Thermal properties of the products were determined by DSC and TGA techniques. DSC traces showed T_g's for ethylene glycol polythiourethane at ?39 and 58°C, for glycerol polythiourethane at ?39 and 126°C, for castor oil polythiourethane at ?38°C and ?17°C, for ethylene diamine polythiourea at ?45°C, and for triethylene tetra amine poly thiourea at ?39°C. Additionally, DSC analysis of polythioureas showed an endotherm at around 100°C. All of the polymers started to decompose around 200°C. Tensile properties of the polymers were determined. Polythiourethanes showed higher tensile strength and lower elongation when compared with their urea analogs. Stress at break values of the polymers were 1.2 MPa for glycerol polythiourethane, 0.6 MPa for ethylene glycol polythiourethane, 0.5 MPa for ethylene diamine polythiourea, and 0.9 MPa for triethylene tetra amine polythiourea polymers. Unfortunately, polymers synthesized showed poor solvent resistance. All polymers swelled and disintegrated in CH₂Cl₂ in 5 h. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

New soybean oil–styrene–divinylbenzene thermosetting copolymers. I. Synthesis and characterization

The cationic copolymerization of regular soybean oil, low‐saturation soybean oil (LoSatSoy oil), or conjugated LoSatSoy oil with styrene and divinylbenzene initiated by boron trifluoride diethyl etherate (BF₃·OEt₂) or related modified initiators provides viable polymers ranging from soft rubbers to hard, tough, or brittle plastics. The gelation time of the reaction varies from 1 × 10² to 2 × 10⁵ s at room temperature. The yields of bulk polymers are essentially quantitative. The amount of crosslinked polymer remaining after Soxhlet extraction ranges from 80 to 92%, depending on the stoichiometry and the type of oil used. Proton nuclear magnetic resonance spectroscopy and Soxhlet extraction data indicate that the structure of the resulting bulk polymer is a crosslinked polymer network interpenetrated with some linear or less‐crosslinked triglyceride oil–styrene–divinylbenzene copolymers, a small amount of low molecular weight free oil, and minor amounts of initiator fragments. The bulk polymers possess glass‐transition temperatures ranging from approximately 0 to 105°C, which are comparable to those of commercially available rubbery materials and conventional plastics. Thermogravimetric analysis (TGA) indicates that these copolymers are thermally stable under 200°C, with temperatures at 10% weight loss in air (T₁₀) ranging from 312 to 434°C, and temperatures at 50% weight loss in air (T₅₀) ranging from 445 to 480°C. Of the various polymeric materials, the conjugated LoSatSoy oil polymers have the highest glass‐transition temperatures (T_g) and thermal stabilities (T₁₀). The preceding properties that suggest that these soybean oil polymers may prove useful where petroleum‐based polymeric materials have found widespread utility. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 658–670, 2001     

A simple one‐step synthesis and polymerization of plant oil triglyceride iodo isocyanates

In this study, a novel and simple route for the synthesis of the iodine isocyanate (INCO) adduct of soybean oil triglycerides is described. Soybean oil iodo isocyanate (ISONCO) was synthesized by the reaction of iodine isocyanate and soybean oil at room temperature. ISONCO was then polymerized with polyols, such as, castor oil, pentamethylene glycol, and glycerol to give the corresponding polyurethanes and with polyamines, such as, ethylene diamine, hexamethylene diamine, and triethylene tetramine to give corresponding polyureas. The structures of the monomer and the polymers were determined by FTIR and ¹H‐NMR analyses. Thermal properties of the polymers were determined by DSC and TGA. Thermal degradation of the polyurethanes started at 150°C. Stability of the polyureas was higher than polyurethanes. Almost all polymers showed a T_g around ?50°C. The mechanical properties of the polymers were determined by tensile tests. Among the polymers synthesized, castor oil polyurethane showed the highest elongation at break and the lowest tensile strength of 140 KPa. The highest tensile strength of 900 KPa was observed in the pentamethylene glycol polyurethanes. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Mechanical properties of linseed oil monoglyceride maleate/styrene copolymers

In this study, rigid thermoset polymers were prepared from radical copolymerization of linseed oil monoglyceride maleates with styrene (St). First, linseed oil monoglycerides (LOMGs) were obtained from the reaction of linseed oil with glycerol at 220–240°C. Then, LOMGs were reacted with maleic anhydride at 80°C to produce the LOMG maleate half esters. The reactions were followed by FTIR spectroscopy and size exclusion chromatography (SEC) and the final resin was characterized by ¹H‐NMR spectroscopy. Finally, radical copolymerization of the LOMG maleates with 20, 40, 60, and 80% by weight of St was performed to produce rigid, thermoset polymers. The thermomechanical properties and fracture behavior of the cured copolymers, as a function of the percentage of St, were measured and analyzed. The copolymer with 40% by weight of St was the material with better mechanical and fracture behavior. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 825–836, 2005     

Thermal Oxidation Kinetics of Refined Hazelnut Oil

In this study, oxidation kinetics of refined hazelnut oil heated at the temperature range from 80 to 180 °C was evaluated. The changes in peroxide value, p‐anisidine value, polymer triglyceride content, α‐tocopherol content, and color values during oxidation were best fitted to zero‐order kinetic model. The rate constants for the p‐anisidine value, polymer triglyceride content, and degradation of α‐tocopherol of hazelnut oil increased at the temperatures between 80 and 160 °C, while the rate constant for peroxide value decreased at the temperatures between 80 and 140 °C. The activation energies for the formation of peroxides (at 80–140 °C), secondary oxidation products such as alkenals, the polymer triglycerides, and degradation of α‐tocopherol were found as 47.49, 29.95, 52.65, and 14.22 kJ mol^?1, respectively. The induction period of hazelnut oil was observed to reduce with increasing oxidation times. The increase in the b* value with the oxidation time and temperature was attributed to the fact that the heating process intensified the yellow color of the oil.     

Rigid thermosetting liquid molding resins from renewable resources. II. Copolymers of soybean oil monoglyceride maleates with neopentyl glycol and bisphenol A maleates

Soybean oil monoglycerides (SOMG), obtained by the glycerolysis of soybean oil, were reacted with maleic anhydride to produce SOMG maleate half esters. The copolymers of the SOMG maleates with styrene produced rigid thermosetting polymers. The dynamic mechanical analysis (DMA) of this polymer showed a glass‐transition temperature (T_g) around 133°C and a storage modulus (E′) value around 0.94 GPa at 35°C. The tensile tests performed on this polymer showed a tensile strength of 29.36 MPa and a tensile modulus of 0.84 GPa. Mixtures of SOMG with neopentyl glycol (NPG) and SOMG with bisphenol A (BPA) were also maleinized under the same reaction conditions and the resulting maleates were then copolymerized with styrene. The resulting polymers were analyzed for their mechanical properties. The T_g of the copolymers of the SOMG/NPG maleates with styrene was 145°C and the E′ value at 35°C was 2 GPa. The tensile strength of this polymer as calculated from the stress–strain data was 15.65 MPa and the tensile modulus was 1.49 GPa. The T_g of the copolymers of SOMG/BPA maleates, on the other hand, was found to be around 131°C and the E′ value was 1.34 GPa at 35°C. The changes observed in the mechanical properties of the resulting polymers with the introduction of NPG maleates and BPA maleates to the SOMG maleates can be explained by the structural changes on the polymer backbone. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 972–980, 2002     

Simultaneous interpenetrating polymer networks based on bromoacrylated castor oil polyurethane

In the first part of this study, simultaneous addition of bromine and acrylate to the double bonds of castor oil was achieved. In the second part of the study, bromoacrylated castor oil (BACO) was reacted with toluenediisocyanate (TDI), to form a prepolyurethane (BACOP). The prepolyurethanes were reacted with styrene (STY), 2‐hydroxyethyl methacrylate (HEMA), methyl methacrylate (MMA), and 3‐(acryloxy)‐2‐hydroxy propyl methacrylate (AHPMA) free radically, using the acrylate functional group to prepare the simultaneous interpenetrating polymer networks (SINs). 2,2′‐Azobis (isobutyronitrile) (AIBN) was used as the initiator and diethylene glycol dimethacrylate (DEGDMA) was used as the crosslinker. BACO and BACOP were characterized by IR, ¹H‐NMR, and ¹³C‐NMR techniques. Synthesized polymers were characterized by their resistance to chemical reagents, thermogravimetric analysis, and dynamic mechanical thermal analyzer (DMTA). All the polymers decomposed with 6–10% weight loss in a temperature range of 25–240°C. MMA‐type SIN showed the highest T_g (126°C), while STY‐type SINs showed the highest storage modulus (8.6 × 10⁹ Pa) at room temperature, with respect to other synthesized SINs. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2947–2955, 2006     

Polymerization reactions of epoxidized soybean oil and maleate esters of oil‐soluble resoles

In this study, the polymerization reactions of epoxidized soybean oil (ESO) with the maleate half‐esters of oil‐soluble resoles and the properties of the final products were demonstrated. The maleate half‐esters of the dimeric oil‐soluble resoles were obtained by the esterification reaction of maleic anhydride with a p‐tertiary butyl phenol (p‐TBP) resole and p‐nonyl phenol resole resins in the first step. The monomers were characterized by IR and ¹H‐NMR techniques. Then, the oil‐soluble resole maleates were polymerized with ESO to obtain tough and load‐bearing thermoset materials. The thermal and mechanical properties of the materials were determined by dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, and tensile strength testing. The tensile strengths and storage moduli of the crosslinked polymers varied between 0.17 and 13 MPa and 10 and 1088 MPa, respectively. The elongation percentages of the materials were between 1 and 128%. The thermal resistance of the thermosets was measured as the 5% weight loss temperature. The reaction product of the ESO and maleate ester of p‐TBP showed the highest 5% weight loss at 247°C. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41457.     

Physical State of β‐Carotene at High Concentrations in a Solid Triglyceride Matrix

The highly hydrophobic β‐carotene is often distributed or dissolved in triglycerides to enhance either nutritional or coloring effects. This study aims at elucidating the physical state of β‐carotene that at high concentrations are mixed into a solid high‐melting tri‐glyceride matrix by dissolution at high temperatures (165 °C) in the melted triglyceride. Extensive isomerization of β‐carotene is observed by HPLC after melting crystalline all‐trans β‐carotene and in the solid mixtures of β‐carotene and fully hydrogenated sunflower oil. Crystalline triglyceride is found in the mixed samples by XRPD analysis whereas no signs of crystalline lattice structures of β‐carotene are detected. DSC thermograms show only the melting and recrystallization events of triglycerides, which are affected by the presence of β‐carotene. Severe line broadening is observed in the ¹³C CP/MAS NMR spectra of the β‐carotene‐triglyceride mixtures when compared to crystalline β‐carotene, demonstrating the lack of long‐range order of the carotene. Altogether, the results demonstrate that β‐carotene is present as an amorphous mixture of trans‐ and cis‐isomers dispersed into a structure of crystalline triglyceride in the solid carotene‐triglyceride mixtures. Practical applications: The amorphous structure of trans‐ and cis‐isomers in solid formulations of β‐carotene‐triglyceride mixtures will strongly affect their functional properties related to nutrition and color as food ingredients.     

New polymers from plant oil derivatives and styrene‐maleic anhydride copolymers

In this study, styrene maleic anhydride copolymer (SMA2000, Styrene : Maleic Anhydride 2 : 1) is grafted and/or crosslinked with epoxidized methyl oleate, epoxidized soybean oil, methyl ricinoleate (MR), castor oil (CO), and soybean oil diglyceride. Base catalyzed epoxy‐anhydride and alcohol‐anhydride polyesters were synthesized by using the anhydride on SMA, the epoxy or secondary alcohol groups on the triglyceride based monomers. The characterizations of the products were done by DMA, TGA, and IR spectroscopy. SMA‐epoxidized soy oil and SMA‐CO polymers are crosslinked rigid infusible polymers. SMA‐epoxidized soy oil and SMA‐CO showed T_g's at 70 and 66°C, respectively. Dynamic moduli of the two polymers were 11.73 and 3.34 Mpa respectively. SMA‐epoxidized methyl oleate, poly[styrene‐co‐(maleic anhydride)]‐graft‐(methyl ricinoleate), and SMA‐soy oil diglyceride polymers were soluble and thermoplastic polymers and were characterized by TGA, GPC, DSC, NMR, and IR spectroscopy. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

New polymers from epoxidized soybean oil with pyridine derivatives

In this study 4‐methylpyridine (4MP), 4‐vinylpyridine (4VP) and poly(4‐vinylpyridine) (P4VP) were separately reacted with epoxidized soybean oil triglycerides (ESO) to give plant oil based thermoset polymers. The addition reaction of pyridine with epoxide followed by a rearrangement results in formation of pyridone units and these were polymerized via a Diels–Alder reaction. DMA, DSC, TGA and IR spectroscopy were used for the characterization of the products. 4MP‐ESO, P4VP‐ESO and P4VP‐ESO‐in situ polymers were crosslinked yielding rigid infusible polymers. Glass transition temperatures (T_g) of 4MP‐ESO and P4VP‐ESO‐in situ were found as ?10.5 and 70.5 (32.3 as shoulder) °C respectively, by DMA analysis. Storage moduli of 4MP‐ESO and P4VP‐ESO‐in situ at 25°C were 13.7 and 187.2 MPa, respectively. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of reactive soybean oils for use as a biobased thermoset resins in structural natural fiber composites

Biobased thermosets resins were synthesized by functionalizing the triglycerides of epoxidized soybean oil with methacrylic acid, acetyl anhydride, and methacrylic anhydride. The obtained resins were characterized with FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy to confirm the functionalization reactions and the extent of epoxy conversion. The viscosities of the methacrylated soybean oil resins were also measured for the purpose of being used as a matrix in composite applications. The cross‐linking capability was estimated by UV and thermally initiated curing experiments, and by DSC analysis regarding the degree of crosslinking. The modifications were successful because up to 97% conversion of epoxy group were achieved leaving only 2.2% of unreacted epoxy groups, which was confirmed by ¹H‐NMR. The ¹³C‐NMR confirms the ratio of acetate to methacrylate methyl group to be 1 : 1. The viscosities of the methacrylated soybean oil (MSO) and methacrylic anhydride modified soybean oil (MMSO) were 0.2 and 0.48 Pas, respectively, which indicates that they can be used in resin transfer molding process. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Conversion of Triglycerides to Hydrocarbons Over Supported Metal Catalysts

The deoxygenation of triglycerides (tristearin, triolein and soybean oil) under nitrogen atmosphere was investigated over 20 wt% Ni/C, 5 wt% Pd/C and 1 wt% Pt/C catalysts. Use of the Ni catalyst resulted in near quantitative conversion of the triglyceride in each case, high yields of linear C5 to C17 alkanes and alkenes being obtained. Oxygen was rejected as CO and CO₂, while small amounts of light alkanes (C1–C4) and H₂ were also formed. ¹³C NMR spectroscopic analysis of the liquid product from soybean oil deoxygenation at intermediate reaction times suggested that one pathway for triglyceride deoxygenation involves liberation of fatty acids via C–O bond scission and concomitant H transfer, followed by elimination of CO₂ from the acids in a later step. Compared to Ni, catalysts containing Pd or Pt supported on activated carbon showed lower activity for both triglyceride deoxygenation and for cracking of the fatty acid chains.