Optimal design of a metal hydride hydrogen storage bed using a helical coil heat exchanger along with a central return tube during the absorption process

Metal-hydride (MH) reactors are one of the most promising approaches for hydrogen storage because of their low operating pressure, high storage volumetric density and high security. However, the heat transfer performance of the MH reactor for high hydrogenation rate is inferior. In this study, the heat transfer and hydrogen absorption process of metal hydride tank performance in Mg₂Ni bed is analyzed numerically using commercial ANSYS-FLUENT software. The MH reactor is considered a cylindrical bed including a helical tube along with a central straight return tube for the cooling fluid. The effects of geometrical parameters including the tube diameter, the pitch size and the coil diameter as well as operational parameters on the heat exchanged and hydrogen absorption reactive time are evaluated comprehensively. The results showed that the helical heat exchanger along with central return tube could effectively improve heat exchanged between the cooling fluid and the metal alloy and reduce the temperature of the bed results in a higher rate of hydrogen absorption. For a proper configuration and geometry of the helical coil heat exchanger with a central return tube, the absorption reaction time is reduced by 24% to reach 90% of the storage capacity. After the optimization study of the geometrical parameters, a system with the heat exchanger tube diameter of 5 mm, coil diameter of 18 mm and the coil pitch value of 10 mm is recommended to have lower hydrogen absorption time and higher hydrogen storage capacity. The presented MH reactor can be applied for improvement of heat exchange and absorption process in industrial MH reactors.     

Performance Enhancement of Shell and Helical Coil Water Coolers Using Different Geometric and Fins Conditions

Experimental investigations of heat transfer characteristics and performance enhancement of shell and helical coil water coolers using external radial fins and different shells diameters were conducted. The study aims to enhance the water coolers performance in a trial to improve coil compactness. Two helical coils; one with a plain tube and the other with external radial fins, were tested in four shells of different tube diameters. Refrigerant passing inside the helical coils was used to cool water that enclose/passes in the space between the helical coil and the shell. Tests were conducted under mixed convection heat transfer regimes. Results showed performance and compactness enhancement with the insertion of external radial fins and increasing the shell diameter to helical coil diameter ratio. For nonfinned and finned coils, Nusselt number increased with increasing Reynolds number, Grashof number, and shell diameter. Correlations were predicted to give the Nusselt number in terms of Reynolds number, Grashof number, and shell diameters for finned and nonfinned helical coils. Correlations predictions were compared with present and previous experimental results and good agreements were obtained.     

Optimization of heat exchanger designs in metal hydride based hydrogen storage systems

Design of the heat exchanger in a metal hydride based hydrogen storage system influences the storage capacity, gravimetric hydrogen storage density, and refueling time for automotive on-board hydrogen storage systems. The choice of a storage bed design incorporating the heat exchanger and the corresponding geometrical design parameters is not obvious. A systematic study is presented to optimize the heat exchanger design using computational fluid dynamics (CFD) modeling. Three different shell and tube heat exchanger designs are chosen. In the first design, metal hydride is present in the shell and heat transfer fluid flows through straight parallel cooling tubes placed inside the bed. The cooling tubes are interconnected by conducting fins. In the second design, heat transfer fluid flows through helical tubes in the bed. The helical tube design permits use of a specific maximum distance between the metal hydride and the coolant for removing heat during refueling. In the third design, the metal hydride is present in the tubes and the fluid flows through the shell. An automated tool is generated using COMSOL-MATLAB integration to arrive at the optimal geometric parameters for each design type. Using sodium alanate as the reference storage material, the relative merits of each design are analyzed and a comparison of the gravimetric and volumetric hydrogen storage densities for the three designs is presented.     

Convective heat transfer in helical coils for constant-property and variable-property flows with high Reynolds numbers

Forced convection heat transfer of single-phase water in helical coils was experimentally studied. The testing section was constructed from a stainless steel round tube with an inner diameter of 10 mm, coil diameter of 300 mm, and pitch of 50 mm. The experiments were conducted over a wide Reynolds number range of 40000 to 500000. Both constant-property flows at normal pressure and variable-property flows at supercritical pressure were investigated. The contribution of secondary flow in the helical coil to heat transfer was gradually suppressed with increasing Reynolds number. Hence, heat transfer coefficients of the helical tube were close to those of the straight tube under the same flow conditions when the Reynolds number is large enough. Based on the experimental data, heat transfer correlations for both incompressible flows and supercritical fluid flows through helical coils were proposed.     

A numerical study of flow behavior in the shell and helical finned-tube heat exchanger

Extended surfaces mostly aim to improve the heat transfer upon increasing the area of heat transfer. In this paper, the influence of using fins on flow behaviors and the heat transfer of the shell and tube heat exchanger has been investigated. In this regard, the present results are verified with available experimental data in the literature for a helical tube without fins. The effects of fin density (fin per inch), its height, and material have been studied on the heat transfer rate. In addition, the effects of radial pitch and the number of coil loops are studied. The results indicate that implementing extended surfaces significantly increases the heat transfer rate. The increase of fin density from 8 to 12 and the height from 11.5 to 13.5 mm enhances heat transfer up to 48% and 43% depending on Dean number, respectively. The rise of coil pitch augments the overall heat transfer, and it is more efficient at lower Dean numbers. The predicted results also show that the fin material does not have any significant effect on heat transfer.     

On the performance of a vertical helical coil heat exchanger. Numerical model and experimental validation

A numerical model was developed in order to predict the heat transfer process and pressure drop in a vertical helical coil heat exchanger (HCHE) located inside a fluid storage tank in which water is used as inner and outer fluid. Natural convection was considered as boundary condition for the HCHE outer surface. The model was validated with experimental data obtained from an own facility with two HCHEs tested under several operating conditions. The model developed was used to evaluate the main HCHE representative geometrical parameter's influence on the overall heat transfer coefficient and pressure drop. The results show that by increasing the tube diameter causes an increase of the Nusselt number and a larger heat transfer rate to pressure drop ratio is obtained.     

Numerical studies on flow and heat transfer in membrane helical-coil heat exchanger and membrane serpentine-tube heat exchanger

The flow and heat transfer characteristics of synthesis gas (syngas) in membrane helical-coil heat exchanger and membrane serpentine-tube heat exchanger under different operating pressures, inlet velocities and pitches are investigated numerically. The three-dimensional governing equations for mass, momentum and heat transfer are solved using a control volume finite difference method. The realizable k-ε model is adopted to simulate the turbulent flow and heat transfer in heat exchangers. There flows syngas in the channels consisting of the membrane helical coils or membrane serpentine tubes, where the operating pressure varies from 0.5 to 3.0 MPa. The numerically obtained heat transfer coefficients for heat exchangers are in good agreement with experimental values. The results show that the syngas tangential flow in the channel consisting of membrane helical coils is significant to the heat transfer enhancement to lead to the higher average heat transfer coefficient of membrane helical-coil heat exchanger compared to membrane serpentine-tube heat exchanger. The syngas tangential velocity in the membrane helical-coil heat exchanger increases along the axial direction, and it is independent of the gas pressure, increasing with the axial velocity and axial pitch rise and decreasing with the radial pitch rise.     

Numerical investigation of fluid flow and heat transfer over louvered fins in compact heat exchanger

Numerical investigation of fluid flow and heat transfer characteristics over louvered fins and flat tube in compact heat exchangers is presented in this study. Three-dimensional simulations of single and double row tubes with louvered fins have been conducted. Simulations are performed for different geometries with varying louver pitch, louver angle, fin pitch and tube pitch and for different Reynolds number. Conjugate heat transfer and conduction through the fins are considered. The air-side performance of heat exchanger is evaluated by calculating Stanton number and friction factor. The results are compared with experiment and a good agreement is observed. The local Nusselt number variation along the top surface of the louver is calculated and effects of geometrical parameters on the average heat transfer coefficient is computed. Design curves are obtained which can used to predict the heat transfer and the pressure drop for a given louver geometry.     

Analysis of coiled-tube heat exchangers to improve heat transfer rate with spirally corrugated wall

Steady heat transfer enhancement has been studied in helically coiled-tube heat exchangers. The outer side of the wall of the heat exchanger contains a helical corrugation which makes a helical rib on the inner side of the tube wall to induce additional swirling motion of fluid particles. Numerical calculations have been carried out to examine different geometrical parameters and the impact of flow and thermal boundary conditions for the heat transfer rate in laminar and transitional flow regimes. Calculated results have been compared to existing empirical formulas and experimental tests to investigate the validity of the numerical results in case of common helical tube heat exchanger and additionally results of the numerical computation of corrugated straight tubes for laminar and transition flow have been validated with experimental tests available in the literature. Comparison of the flow and temperature fields in case of common helical tube and the coil with spirally corrugated wall configuration are discussed. Heat exchanger coils with helically corrugated wall configuration show 80–100% increase for the inner side heat transfer rate due to the additionally developed swirling motion while the relative pressure drop is 10–600% larger compared to the common helically coiled heat exchangers. New empirical correlation has been proposed for the fully developed inner side heat transfer prediction in case of helically corrugated wall configuration.     

Concentration solar dryer water-to-air heat exchanger: Modeling and parametric studies

In this paper we present a modeling and parametric studies of a water-to-air heat exchanger. This exchanger is formed of a fan blowing the air to be heated through a battery of smooth tubes where the hot water—coming from solar concentrators—circulates. The heated air is injected into a thermal room to dry the clay bricks.In the first part, we study the most used models in the estimation of the heat transfer and air flow pressure drop across a tube bundle, and subsequently calculate the required transmitted power to the air.In the second part, we focus on the parametric study of the influence of the different geometric parameters of the exchanger on the heat flow rate, the air outlet temperature, the pressure drop and the requested transferred power to the air. The considered parameters are: The water heat flow rate, the heat exchanger compactness, the rows arrangement, the tube diameter, the transverse pitch, the total number of tubes, the number of rows and the air velocity.Simulations have shown that the heat exchanger performance could be improved essentially throughout the design and manufacturing process by modifying the different geometrical parameters and filling certain conditions.     

Development of heat transfer coefficient correlation for concentric helical coil heat exchanger

The present study deals with developing a Correlation for heat transfer coefficient for flow between concentric helical coils. Existing Correlation is found to result in large discrepancies with the increase in gap between the concentric coils when compared with the experimental results. In the present study experimental data and CFD simulations using Fluent 6.3.26 are used to develop improved heat transfer coefficient correlation for the flue gas side of heat exchanger. Mathematical model is developed to analyze the data obtained from CFD and experimental results to account for the effects of different functional dependent variables such as gap between the concentric coil, tube diameter and coil diameter which affects the heat transfer. Optimization is done using Numerical Technique and it is found that the new correlation for heat transfer coefficient developed in this investigation provides an accurate fit to the experimental results within an error band of 3–4%.     

Experimental study of heat transfer enhancement with wire coil inserts in laminar-transition-turbulent regimes at different Prandtl numbers

Helical-wire-coils fitted inside a round tube have been experimentally studied in order to characterize their thermohydraulic behaviour in laminar, transition and turbulent flow. By using water and water–propylene glycol mixtures at different temperatures, a wide range of flow conditions have been covered: Reynolds numbers from 80 to 90,000 and Prandtl numbers from 2.8 to 150. Six wire coils were tested within a geometrical range of helical pitch 1.17 < p/d < 2.68 and wire diameter 0.07 < e/d < 0.10. Experimental correlations of Fanning friction factor and Nusselt number as functions of flow and dimensionless geometric parameters have been proposed. Results have shown that in turbulent flow wire coils increase pressure drop up to nine times and heat transfer up to four times compared to the empty smooth tube. At low Reynolds numbers, wire coils behave as a smooth tube but accelerate transition to critical Reynolds numbers down to 700. Within the transition region, if wire coils are fitted inside a smooth tube heat exchanger, heat transfer rate can be increased up to 200% keeping pumping power constant. Wire coil inserts offer their best performance within the transition region where they show a considerable advantage over other enhancement techniques.     

Thermal performance and pressure drop of the helical-coil heat exchangers with and without helically crimped fins

In the present study, the thermal performance and pressure drop of the helical-coil heat exchanger with and without helical crimped fins are studied. The heat exchanger consists of a shell and helically coiled tube unit with two different coil diameters. Each coil is fabricated by bending a 9.50 mm diameter straight copper tube into a helical-coil tube of thirteen turns. Cold and hot water are used as working fluids in shell side and tube side, respectively. The experiments are done at the cold and hot water mass flow rates ranging between 0.10 and 0.22 kg/s, and between 0.02 and 0.12 kg/s, respectively. The inlet temperatures of cold and hot water are between 15 and 25 °C, and between 35 and 45 °C, respectively. The cold water entering the heat exchanger at the outer channel flows across the helical tube and flows out at the inner channel. The hot water enters the heat exchanger at the inner helical-coil tube and flows along the helical tube. The effects of the inlet conditions of both working fluids flowing through the test section on the heat transfer characteristics are discussed.     

Laminar heat transfer performance of power law fluids in coiled square tube with various configurations

This study addresses heat transfer performance of laminar non-Newtonian fluid flow in various configurations of coiled square tubes e.g., in-plane spiral ducts, helical spiral ducts and conical spiral ducts. The non-Newtonian fluid considered in this study is the aqueous solution of carboxymethyl cellulose (CMC) which is modeled as power-law fluid. Effects of tube geometries, power-law index (concentration of CMC) and other parameters are quantified and discussed to analyze flow behavior and heat transfer performance. Results are compared with those for a straight square tube of the same length as that used to form the coils. A Figure of Merit is defined to compare the heat transfer performance of different geometries with respect to the pumping power. The results suggest that CMC solution yields better heat transfer performance of about twice than that of water at Re ~ 1000. Among all considered designs, helical coil gives the best heat transfer performance; however, when the pumping power is considered, in-plane coil design performs the best in term of Figure of Merit.     

An experimental study of thermal performance of shell-and-coil heat exchangers

In the present study an experimental investigation of the mixed convection heat transfer in a coil-in-shell heat exchanger is reported for various Reynolds and Rayleigh numbers, various tube-to-coil diameter ratios and dimensionless coil pitch. The purpose of this article is to assess the influence of the tube diameter, coil pitch, shell-side and tube-side mass flow rate over the performance coefficient and modified effectiveness of vertical helical coiled tube heat exchangers. The calculations have been performed for the steady-state and the experiments were conducted for both laminar and turbulent flow inside coil. It was found that the mass flow rate of tube-side to shell-side ratio was effective on the axial temperature profiles of heat exchanger. The results also indicate that the ? − NTU relation of the mixed convection heat exchangers was the same as that of a pure counter-flow heat exchanger.     

连续型螺旋折流板换热器结构及性能研究

连续型螺旋折流板换热器一直受限于加工工艺而未能得到广泛应用,本文提出采用加装中芯管的方法,实现了连续型折流板的加工,并给出了连续型折流板螺旋升角和螺旋包络面的计算方法。利用Fluent软件,与现今应用较广泛的1／4椭圆形折流板换热器的流动和换热特性进行模拟比较。结果表明,连续型折流板换热器换热能力提高了近一倍,综合性能系数也提高了近30％,虽然1／4椭圆折流板压力降较小,但其折流板的漏流,也严重降低了传热能力。为在工程中推广应用连续型螺旋折流板换热器,本文提供了理论依据和技术支撑。     

Experimental investigation of three fluid heat exchangers using roughness on the outer surface of a helical coil

The aim of this study is to utilize waste thermal energy from industries into useful heat for water and air heating. In this paper, the thermal modeling and performance of three fluid heat exchangers (TFHE) have been experimentally investigated. The TFHE considered here is an enhanced version of the double-pipe heat exchanger. A novel TFHE having fin (1 mm thin copper wire of 10 mm pitch) acts as a roughness element, which is wrapped on the helical coil's outer surface for increasing heat transfer (HT) rate and the turbulence effect for normal water, and this outer surface finned helical coil is inserted between two concentric straight tubes. The innermost tube carries atmospheric air, the finned helical coil tube carries waste hot fluid while normal water flows in the inner annulus of the outermost tube. The coiled-side Reynolds number is varied in the range of 7000–30,000, while the curvature ratio of 0.1315, pitch-to-inside diameter ratio of 2.88 and wire-to-tube diameter $$ of the helical tube is kept constant. A counterflow arrangement has been made for experimentation. Nusselt number is calculated using the traditional Wilson plot method that is compared and validated with results available in the literature. The overall HT coefficient is found to increase by increasing the volume flow rate of fluids, while effectiveness decreases or increases depending on residence time and capacity ratio. The percentage increment in the Nusselt number, maximum friction factor, overall HT coefficient between waste hot fluid to normal water, effectiveness is found to be 21.10%–23.88%, 90.91%, 3.40%–29.45%, 3.40%–25.33%, respectively, for the coil side. TFHE is thus proposed for heating water and space simultaneously.     

Effect of coil-wire insert on heat transfer enhancement and pressure drop of the horizontal concentric tubes

In the present study, the heat transfer characteristics and the pressure drop of the horizontal double pipe with coil-wire insert are investigated. The inner and outer diameters of the inner tube are 8.92 and 9.52 mm, respectively. The coiled wire is fabricated by bending a 1 mm diameter of the iron wire into a coil with a coil diameter of 7.80 mm. Cold and hot water are used as working fluids in the shell side and tube side, respectively. The test runs are performed at the cold and hot water mass flow rates ranging between 0.01 and 0.07 kg/s, and between 0.04 and 0.08 kg/s, respectively. The inlet cold and hot water temperatures are between 15 and 20 °C, and between 40 and 45 °C, respectively. The effect of the coil pitch and relevant parameters on heat transfer characteristics and pressure drop are considered. Coil-wire insert has significant effect on the enhancement of heat transfer especially on laminar flow region. Non-isothermal correlations for the heat transfer coefficient and friction factor are proposed. There is reasonable agreement between the measured data and predicted results.     

Heat transfer improvement in a tube by inserting perforated conical ring and wire coil as turbulators

In the present study, two various passive methods for heat transfer enhancement, including conical ring and wire coil are placed in a tube as turbulators. Four conical rings with four side holes are utilized with the same distance. The wire coil is employed at the center of the tube. The considered Reynolds numbers are between 4000 and 10,000. The studied geometrical parameters contain the pitch and diameter of a wire coil. Four different pitches of wire coil, including 10, 12, 14, and 16 mm, are evaluated. Furthermore, four values of wire coil diameter such as 2, 4, 6, and 8 mm are certain. The obtained numerical results displayed that by declining the pitch of a wire coil (37.5%), the average Nusselt number increases by about 143%. Also, augmentation in wire coil diameter by 300% leads to a growth in average Nusselt number by about 131%. Moreover, owing to utilizing two various turbulators, the pressure drop is significantly high in comparison with the bare tube. At Re = 10,000, growth in the inner diameter of the wire coil by 300% leads to an increase in thermal performance by about 36.12%. Moreover, as the pitch of the wire coil rises by 60%, the thermal performance declines by about 35.71%.