共查询到18条相似文献,搜索用时 171 毫秒
1.
《机械工程与自动化》2017,(5)
模拟量输出的电子式电流互感器的工作机理和校验方法不同于传统的电磁式电流互感器,目前对其进行校验需要电子式互感器校验仪和同步装置。针对模拟量输出的电子式电流互感器的本体校验,提出一种新的校验方法——比较测差法,利用专用的电压互感器校验仪测其比值差和相位差,无须同步,所需设备制作简单,原理成熟,无同步误差,测试更准确。 相似文献
2.
3.
4.
基于DSP的电子式电流互感器校验仪的研制 总被引:2,自引:0,他引:2
对电子式电流互感器进行校验是确保其在电力系统中成功应用的前提,针对电子式电流互感器的特性,本文基于DSP设计出了便携式校验仪.此校验仪通过以DSP为核心的电路实现了信号的采集、处理和显示;在算法上对比了准同步DFT算法的两种形式并采用了其中一种,有效抑制了因电网频率波动而导致的非同步采样对校验结果的影响.本装置在实验室里进行了测试,整个装置达到0.1级标准,满足了对0.5级及以下电子式电流互感器的校验需要. 相似文献
5.
电子式互感器及其在数字化变电站中的应用 总被引:1,自引:0,他引:1
详细介绍了电子式互感器的分类和基本原理,并从实用的角度将电子式互感器与传统电磁式电流电压互感器作了对比,同时对电子式互感器的发展状况进行了分析。并以保定供电公司220kV白洋淀站的电子式互感器为例,介绍了电子式互感器在实际运行中取得的良好效果。 相似文献
6.
随着智能变电站的大量建设,传统的电磁式和电容式电压互感器已经不能满足智能电网的发展要求,电子式互感器必将成为未来电压互感器发展的主流。文中在描述电子式电压互感器的分类及几种新型电子式电压互感器基本原理的基础上,对有源和无源电子式电压互感器的性能进行了分析,给出了两者在测量品质、数字化应用、暂态性能等方面的共性与差别,指出有源电子式电压互感器目前在智能变电站建设中更有应用优势,而为了智能电网的长足发展,仍然需要加强无源电子式电压互感器的研究。同时,对我国电子式互感器的研究现状进行了总结,特别是归纳了电子式互感器在智能变电站建设中的应用现状。 相似文献
7.
8.
9.
10.
电子式互感器数字输出接口 总被引:3,自引:2,他引:3
依据电子式电流互感器标准IEC60044-8,对电子式互感器的数字输出接口进行了研究,对规约中规定的电子式互感器的结构、数字输出的物理层、链路层及应用层进行了详细分析,并提出了具体的解决方案,其中采用DSP作为其主处理器连同一些外围电路来实现规约中所描述的MU的功能电路可以满足系统的实时性和可靠性,系统还可以根据现场需要方便地进行扩展.讨论了电子式互感器的应用对变电站的影响及其应用前景. 相似文献
11.
介绍电子皮带称的挂码标定方法,简述了该方法简捷易行,准确度高的特点。掌握该方法会对电子皮带称的标定工作带来诸多好处。 相似文献
12.
A continuous calibration system for high voltage current transformers is presented in this paper. The sensor of this system is based on a kind of electronic instrument current transformer, which is a clamp-shape air core coil. This system uses an optical fiber transmission system for its signal transmission and power supply. Finally the digital integrator and fourth-order convolution window algorithm as error calculation methods are realized by the virtual instrument with a personal computer. It is found that this system can calibrate a high voltage current transformer while energized, which means avoiding a long calibrating period in the power system and the loss of power metering expense. At the same time, it has a wide dynamic range and frequency band, and it can achieve a high accuracy measurement in a complex electromagnetic field environment. The experimental results and the on-site operation results presented in the last part of the paper, prove that it can reach the 0.05 accuracy class and is easy to operate on site. 相似文献
13.
针对目前750 kV电容式电压互感器(CVT)测试中传统比较测差法和"低校高"法存在的问题,研究并开发出750 kV CVT测试和检验系统。通过对750 kV CVT的工作原理、等效电路和误差组成的分析,提出了750 kV CVT空载误差、负荷误差的测试方法和测试线路,研制了30.6 kV带升压器标准电压互感器、变频电子电源和低频互感器检验仪,组成了一套完整的检验系统。通过现场试验,测试数据准确可靠,可以满足0.2级750 kV CVT量值溯源的要求,具有较高的实用和推广价值。 相似文献
14.
For better performances, electronic instrument transformers are used to replace conventional electro-magnetic inductive current or potential transformers based on ferrous cores and windings to measure heavy current and high voltage in power system. But unpredictable stability, high price and unsatisfactory life hold back their industrializations. Employing the simple but reliable insulation structure of conventional transformer and the unconventional sensing methods of electronic transformers at the same time, an innovative combined electronic instrument transformer is presented in this paper. Performances of the prototype are estimated through relative tests, and the novel design has low price, high accuracy, satisfactory stability, very wide frequency response and long operation life, and therefore is well adapted to any voltage level up to 750 kV. 相似文献
15.
针对航空电子设备和检测仪器的更新换代不断需要新的电子计量仪器,研制丁功能强大、易于扩展的基于VXI总线的航空综合计量系统。阐述了采用VXI总线虚拟仪器的航空综合计量系统硬件构成,给出了系统软件实现方案,并详细探讨了系统硬件集成及软件开发过程中遇到的难点及其解决方法。目前,该系统已投入使用,可取代部队当前使用的大多数航空电子计量仪器。 相似文献
16.
Wang Zhong Kou Xinyu Chen Mingzhou Ye ShenghuaState Key Laboratory of Precision Measuring Technology Instruments Tianjin University Tianjin ChinaXiong ChunbaoTianjin University 《机械工程学报(英文版)》2002,15(4):324-327
A high precision method used for on-spot calibration of distributed stereo reference position setting is presented. The high measuring accuracy in stereo reference calibration is derived from using a high precision water level instrument and an accurate height vernier caliper. It settles the problem of reference calibration effectively and accurately,without using large coordinate measuring machines (CMM). It is more adaptable and precise than traditional calibrationmethods applying theodolites or autocollimators. The error sources of this method are analyzed in detail and severalmethods are developed to eliminate the calibration error.An optimizing swallowtail-like anchor target is developed. Experiments show that the calibration accuracy can be limited within 0.06 mm in the range of 3~5 m and 0.03 mm-withoptimizing anchor target. This method can be widely used in on-spot calibration. 相似文献
17.
18.
归纳总结了压电变压器的特点及应用领域,指出压电变压器作为一种新型的变压器,具有无电磁干扰、功率密度大、转换效率高、体积小、无噪声等特点,弥补了传统电磁变压器的一些不足,并提出了谐振状态下和非谐振状态下小升压比型压电变压器低压电源的设计方法。 相似文献