The development of anti-heat stress clothing for construction workers in hot and humid weather

The purpose of this study was to develop anti-heat stress clothing for construction workers in hot and humid weather. Following DeJonge’s functional clothing design process, the design situation was explored, including clothing fabric heat/moisture transporting properties and UV protection and the aspects of clothing ergonomic design (mobility, convenience, and safety). The problem structure was derived from the results of the surveys in three local construction sites, which agreed well with the task requirements and observations. Specifications were consequently described and 30 commercially available fabrics were identified and tested. Fabric testing data and design considerations were inputted in S-smart system to predict the thermal functional performance of the clothing. A new uniform prototype was developed and evaluated. The results of all measurements suggest that the new uniform which incorporated fabrics with superior heat/moisture transporting properties and loose-fitting design could reduce the workers’ heat stress and improve their comfort and work performance.

Practitioner Summary:

The construction workers’ uniform currently used in Hong Kong during summer was unsatisfactory. Following DeJonge’s functional clothing design process, an anti-heat stress uniform was developed by testing 30 fabrics and predicting clothing thermal functional performance using S-smart system. The new uniform could reduce the workers’ heat stress and improve their comfort and work performance.     

A review of heat transfer phenomena and the impact of moisture on firefighters' clothing and protection

Protective clothing with high insulation properties helps to keep the wearer safe from flames and other types of hazards. Such protection presents some drawbacks since it hinders movement and decreases comfort, in particular due to heat stress. In fact, sweating causes the accumulation of moisture which directly influences firefighters' performance, decreasing protection due to the increase in radiant heat flux. Vaporisation and condensation of hot moisture also induces skin burn. To evaluate the heat protection of protective clothing, Henrique's equation is used to predict the time leading to second-degree burn. The influence of moisture on protection is complex, i.e. at low radiant heat flux, an increase in moisture content increases protection, and also changes thermal properties. Better understanding of heat and mass transfer in protective clothing is required to develop enhanced protection and to prevent burn injuries.

Practitioner Summary: This paper aims to contribute to a better understanding of heat and mass transfer inside firefighters' protective clothing to enhance safety. The focus is on the influence of moisture content and the prevention of steam burn.     

Layering garments during rest and exercise in the cold (8°C): wearer responses and comparability with selected fabric properties

How garments contribute to performance of the clothing system during wear is of interest, as is understanding the value of using fabric properties to inform end-use characteristics. To investigate the influences of layering upper-body garments, four fabrics were used to construct two first-layer garments (wool and polyester) and two outer-layer garments (wool and membrane laminate). Over six sessions, 10 moderately trained males wore each first-layer garment as a single layer and in combination with each outer-layer garment while resting, running and walking in cold environmental conditions (8 ± 1°C, 81 ± 4% RH). Here, the type of garment arrangement worn (fabric type or number of layers) had little influence on heart rate, core body temperature and change in body mass. Weighted mean covered skin temperature was warmer and weighted mean next-to-skin vapour pressure was typically higher (following the onset of exercise) with two layers versus one. Differences among fabrics for individual properties were typically overstated compared to differences among corresponding garments for physiological and psychophysical variables under the conditions of this study. These findings inform the interpretation of particular fabric properties and highlight issues to be acknowledged during development/refinement of fabric test methods.

Practitioner Summary: We examined the way in which selected fibre, fabric and garment (layering) characteristics contribute to performance of the clothing system during wear under cold conditions. Selected properties of the constituent fabrics were found to provide limited insight into how garments perform during wear under the conditions of this study.     

Skin sites to predict deep-body temperature while wearing firefighters’ personal protective equipment during periodical changes in air temperature

The aim of this study was to investigate stable and valid measurement sites of skin temperatures as a non-invasive variable to predict deep-body temperature while wearing firefighters’ personal protective equipment (PPE) during air temperature changes. Eight male firefighters participated in an experiment which consisted of 60-min exercise and 10-min recovery while wearing PPE without self-contained breathing apparatus (7.75 kg in total PPE mass). Air temperature was periodically fluctuated from 29.5 to 35.5 °C with an amplitude of 6 °C. Rectal temperature was chosen as a deep-body temperature, and 12 skin temperatures were recorded. The results showed that the forehead and chest were identified as the most valid sites to predict rectal temperature (R² = 0.826 and 0.824, respectively) in an environment with periodically fluctuated air temperatures. This study suggests that particular skin temperatures are valid as a non-invasive variable when predicting rectal temperature of an individual wearing PPE in changing ambient temperatures.

Practitioner Summary: This study should offer assistance for developing a more reliable indirect indicating system of individual heat strain for firefighters in real time, which can be used practically as a precaution of firefighters’ heat-related illness and utilised along with physiological monitoring.     

A shirt containing multistage phase change material and active cooling components was associated with increased exercise capacity in a hot,humid environment

Recent advances in clothing design include the incorporation of phase change materials (PCM) and other active cooling components (ACC) to provide better body heat dissipation. The purpose of this study was to determine the effect of wearing a shirt containing multistage PCM/ACC on exercise capacity at low (5.0), moderate–high (7.5) and extreme (9.0) levels of the physiological strain index (PSI). Fourteen individuals tested two shirts (control vs. cooling) during 45-min of interval running in a hot, humid (35 ± 1 °C; 55 ± 6% RH) environment. The cooling shirt resulted in an 8% improvement in exercise capacity at a PSI of 7.5 (p < 0.05). The observed increase in exercise capacity would likely translate to a significant improvement in exercise performance. More research is needed to determine a best practice approach for the use of cooling clothing as a counter to exercise-induced heat exposure.

Practitioner Summary: In this report, we demonstrate that when forced to exercise in a hot, humid environment, an individual’s exercise capacity may increase by as much as 8% when wearing a shirt composed of multistage phase change material and active cooling components.     

Effect of uphill walking with varying grade and speed during load carriage on muscle activity

Indian soldiers, while guarding the mountainous border areas, often carry loads in steep uphill gradients. This activity may predispose the risk of muscle injury. The present study aimed to examine the effects of an increasing load, speed and gradient during incremental uphill treadmill walking on different muscles. Twelve infantry soldiers walked on a treadmill at two speeds (2.5 and 4 km/h) with no load, and carrying 10.7, 17 and 21.4 kg loads at 0, 5, 10, 15, 20, 25% gradients. Electromyographic responses of erector spinae (>240%) and vastus medialis (>240%) were mostly affected, followed by soleus (>125%) and gastrocnemius medialis (>100%) at maximum speed, load and gradient combination compared to 0% gradient. Carrying 10.7 kg at 15% gradient and above was found to be highly strenuous and fatiguing with the risk of muscle injury. Uphill load carriage in slower speed is recommended for the maintenance of combat fitness of the individual at higher gradients.

Practitioner Summary:

The present article has evaluated the stress encountered by soldiers during load carriage at incremental uphill gradients while walking at different speeds by recording the muscular activities. Load carriage in steep uphill gradients is highly strenuous and may lead to muscle injury thus compromising the combat fitness.     

Thermal response to firefighting activities in residential structure fires: impact of job assignment and suppression tactic

Firefighters’ thermal burden is generally attributed to high heat loads from the fire and metabolic heat generation, which may vary between job assignments and suppression tactic employed. Utilising a full-sized residential structure, firefighters were deployed in six job assignments utilising two attack tactics (1. Water applied from the interior, or 2. Exterior water application before transitioning to the interior). Environmental temperatures decreased after water application, but more rapidly with transitional attack. Local ambient temperatures for inside operation firefighters were higher than other positions (average ~10–30 °C). Rapid elevations in skin temperature were found for all job assignments other than outside command. Neck skin temperatures for inside attack firefighters were ~0.5 °C lower when the transitional tactic was employed. Significantly higher core temperatures were measured for the outside ventilation and overhaul positions than the inside positions (~0.6–0.9 °C). Firefighters working at all fireground positions must be monitored and relieved based on intensity and duration.

Practitioner Summary: Testing was done to characterise the thermal burden experienced by firefighters in different job assignments who responded to controlled residential fires (with typical furnishings) using two tactics. Ambient, skin and core temperatures varied based on job assignment and tactic employed, with rapid elevations in core temperature in many roles.     

Behavioural,physiological and psychological responses of passengers to the thermal environment of boarding a flight in winter

In practice, passengers actively respond to the thermal environment when they board an aircraft in winter, which is not considered in the current standards. In this study, the behavioural, physiological and psychological responses to the thermal environment were examined at 22 °C (with 68 subjects), 20 °C and 26 °C (with 32 subjects). The results showed that the three air temperature levels had significant effect on nozzle usage and clothing adjustment behaviours, surface skin temperature, and thermal sensation vote (TSV). The walking/waiting states prior to boarding the aircraft cabin had a significant effect on the proportion of jacket removal, TSV and thermal comfort vote. After 10 min in the aircraft cabin, the subjects maintained their comfort in a wider range of the thermal environment when the behavioural adjustments existed compared to when they did not. Thus, a suggestion was made for behavioural adjustments to be provided in aircraft cabins.

Practitioner Summary: Experimental investigation of human responses was conducted in an aircraft cabin. Analysis showed that the subjects maintained their comfort in a wider range of the thermal environment when the behavioural adjustments existed compared to when they did not. Thus, a suggestion was made for behavioural adjustments to be provided in aircraft cabins.     

A comfort assessment of existing cervical orthoses

Purpose: Identify location and intensity of discomfort experienced by healthy participants wearing cervical orthoses.

Method: Convenience sample of 34 healthy participants wore Stro II, Philadelphia, Headmaster, and AspenVista^® cervical orthoses for four-hour periods. Participants reported discomfort level (scale 0–6) and location.

Results: Participants reported mean discomfort for all orthoses over the four-hour test between ‘a little discomfort’ and ‘very uncomfortable’ (mean discomfort score = 1.64, SD = 1.50). Seven participants prematurely stopped tests due to pain and six reported maximum discomfort scores. Significant linear increase in discomfort with duration of wear was found for all orthoses. Significantly less discomfort was reported with Stro II than Headmaster and Philadelphia. Age correlated with greater perceived discomfort. Orthoses differed in the location discomfort was experienced.

Conclusion: Existing cervical orthoses cause discomfort influenced by design and duration of wear with orthoses’ design the more significant factor. This work informed the design of a new orthosis and future orthoses developments.

Practitioner Summary: The purpose of this study was to gain greater knowledge about the discomfort caused by wearing of existing neck orthoses in order to inform the design and development of a new neck orthosis. This study gathers empirical data from a surrogate population and concludes that orthosis design is more influential than the duration of wear.     

Book reviews

Computer Software: legal protection in the United Kingdom Henry Carr & Richard Arnold, 1992 London: Sweet & Maxwell, 2nd ed, xv + 312 pp., £45.00 (hardback)

Advanced Information Systems for Lawyers V. Mital & L. Johnson, 1992 London: Chapman & Hall. pp. 306, £35.00

Law of Contract Laurence Koffman & Elizabeth MacDonald, 1992 London: Fourmat Publishing, 430 pp., paperback £22.50

The Electronic Media and the Transformation of Law M. Ethan Katsh, 1991 Oxford: Oxford University Press. £13.95     

Book reviews

Patent Harmonization Harold C. Wegner London, Sweet & Maxwell, 1993 xx + 376 pp., £70.00 (hardback)

Of Authors and Origins: essays on copyright law Brad Sherman & Alain Strowel (Eds) Oxford, Clarendon Press, 1994 xiv + 313 pp., £30.00 (hardback)

Future Air Navigation Systems Werner Guldimann & Stefan Kaiser Dordrecht, Martinus Nijhoff, 1993 Utrecht Studies in Air and Space Law, Vol. 13 viii + 281 pp., £76.50 (hardback)

The Law of Copyright Terence Prime London, Fourmat Publishing, 1992, xxiv + 313 pp., £30.00 (paperback)     

Too hot to carry on? Disinclination to persist at a task in a warm office environment

We investigated the effect of an elevated ambient temperature on performance in a persistence task. The task involved the coding of incorrect symbols and participants were free to decide how long to spend performing this task. Applying a between-subject design, we tested 125 students in an office-like environment in one of the three temperature conditions. The comfort condition (Predicted Mean Vote [PMV] = 0.01) featured an average air temperature of 24 °C. The elevated ambient temperature condition was 28 °C (PMV = 1.17). Condition three employed an airstream of approximately 0.8 m/s, intended to compensate for performance decrements at the elevated air temperature (28 °C, PMV = 0.13), according to Fanger’s thermal comfort equation. Participants in the warm condition were significantly less persistent compared with participants in the control and compensation conditions. As predicted by the thermal comfort equation, the airstream seemed to compensate for the higher temperature. Participants’ persistence in the compensation and comfort conditions did not differ.

Practitioner Summary: A laboratory experiment involving a simulated office environment and three ambient temperature conditions (24 °C, 28 °C and 28 °C plus airstream) showed that persistence at a task is significantly impaired at 28 °C. An airstream of 0.8 m/s at 28 °C compensated for the disinclination to persist with the task.     

Association between objectively measured static standing and low back pain – a cross-sectional study among blue-collar workers*

This study aims to investigate the cross-sectional association between objectively measured total time and temporal patterns of static standing (short bouts: 0–5 min; moderate bouts: >5–10 min; and long bouts: >10 min) during work and leisure and low back pain (LBP) among 698 blue-collar workers. Workers reported LBP on a 0–10 scale. The association between time spent on static standing and LBP was tested with linear regression. A positive association with LBP intensity was found for long bouts of static standing (β = 0.27) during total day (work + leisure), and total static standing time at leisure (β = 0.12). No significant associations were found for static standing during work and LBP intensity. These findings indicate that particularly long bouts of static standing over the entire day contribute to LBP in blue-collar workers.

Practitioner Summary: The association between LBP and static standing time was investigated. This study indicates that prolonged time standing during total day and standing during leisure are positively associated with LBP among blue-collar workers. Therefore, practitioners should consider long periods of standing as a potential risk factor for LBP.     

Book reviews

Crime and the Computer, Martin Wasik, 1991, Oxford: Clarendon Press. £35.00.

Yearbook of Law, Computers and Technology, Volume 5. K.V. Russell (Ed.), 1991. London: Butterworths. £29.50.

Computers, Artificial Intelligence and the Law. Mervyn E. Bennun (Ed.), 1991. London: Ellis Horwood. xx +132 (including bibliography & index), £26.50

Modelling Legal Argument: reasoning with cases and hypotheticals. Kevin D. Ashley, 1990. Cambridge: MIT Press. 329 pp.     

DISCRETE EVENT-DYNAMIC SYSTEMS FOR MODELING DYNAMIC VALUED NETS

The last few years have seen the development of Discrete Event-Dynamic Net Systems^1,2 as instruments for modeling complex systems. They are able to achieve the following objectives:

—formality of the modeling methodology

—ability to model static and dynamic aspects

—ability to pass between levels of differently rich structures by morphisms

—uniform representation of the communication process as

—an information process

—a decision process and

—a control process

—homogeneity of the representation and modeling methods

—ability to derive qualitative and quantitative statements.

The foundation is provided by a Discrete Event-Dynamic Net System which includes the axiomatic declaration of general Petri nets. In order to calculate the structural and dynamic aspects, so-called Petri net machines are developed. It is shown that this approach can even be used to treat the following aspects:

—use of time during the process

—increase of costs during the generation and transportation of information

—augmentation, evaluation and transformation of information objects.

Recursive formulas are derived and some examples calculated.     

Characterisation of regional skin temperatures in recreational surfers wearing a 2-mm wetsuit

The purpose of this study was to investigate skin temperatures across surfers’ bodies while wearing a wetsuit during recreational surfing. Forty-six male recreational surfers participated in this study. Participants were instrumented with eight wireless iButton thermal sensors for the measurement of skin temperature, a Polar RCX5 heart rate monitor and a 2-mm full wetsuit. Following instrumentation, participants were instructed to engage in recreational surfing activities as normal. Significant differences (p < 0.001) in skin temperature (T_sk) were found across the body while wearing a wetsuit during recreational surfing. In addition, regional skin temperature changed across the session for several regions of the body (p < 0.001), and the magnitude of these changes varied significantly between regions. We show for the first time that significant differences exist in skin temperature across the body while wearing a wetsuit during a typical recreational surfing session. These findings may have implications for future wetsuit design.

Practitioner Summary: This study investigated the impact of wearing a wetsuit during recreational surfing on regional skin temperatures. Results from this study suggest that skin temperatures differ significantly across the body while wearing a 2-mm wetsuit during recreational surfing. These findings may have implications for future wetsuit design.     

Book reviews

Electronic Finance Law Chris Reed, 1993 Hemel Hempstead: Woodhead‐Faulkner. 450 pp. £50.00

Introduction to Computer Law, 2nd Edn David I. Bainbridge, 1993 London: Pitman £18.99

Deontic Logic in Computer Science: normative system specification John‐Jules CH. Meyer & Roel J. Wieringa, 1993 London: John Wiley £34.95, xiv + 317pp.     

Jerry can carriage is an effective predictor of stretcher carry performance

Carrying a casualty on a stretcher is a critical task conducted in a range of occupations. To ensure that personnel have the requisite physical capacity to conduct this task, two bilateral jerry can carries were used to predict individual performance in a four-person stretcher carry. Results demonstrated a bilateral 22-kg jerry can carry (R² = 0.59) had superior predictive ability of stretcher carry performance than a bilateral 15-kg jerry can carry (R² = 0.46). Pre- to post-carry changes in grip endurance (p > 0.05), back–leg isometric strength (p > 0.05) and leg power (p > 0.05) were not significantly different between carry tasks. There was no significant difference in heart rate (p > 0.05) and oxygen consumption (p > 0.05) between the stretcher carry and either jerry can carry. Thus, on the basis of performance correlations and physiological measures, the 22-kg jerry can carry is an appropriate predictive assessment of four-person stretcher carriage.

Practitioner Summary: This study investigated the ability of a jerry can carry to predict individual performance on a four-person stretcher carry. Performance correlations were substantiated with physiological measures to demonstrate similar physical requirements between task and test. These results can be used to set physical employment standards to assess stretcher carriage.     

The Proactive and Preventive Privacy (3P) Framework for IoT Privacy by Design

The Problem

Internet of Things (IoT) is providing new services and insights by sensing contextual data but there are growing concerns of privacy risks from users that need immediate attention.

The Reason

The IoT devices and smart services can capture Personally Identifiable Information (PII) without user knowledge or consent. The IoT technology has not reached the desired level of maturity to standardize security and privacy requirements.

The Solution

IoT Privacy by Design is a user-centric approach for enabling privacy with security and safety as a ‘win-win’ positive outcome of IoT offerings, irrespective of business domain. The Proactive and Preventive Privacy (3P) Framework proposed in this paper should be adopted by the IoT stakeholders for building trust and confidence in end users about IoT devices and smart services.