Biohydrogen production from xylose by Thermoanaerobacterium thermosaccharolyticum KKU19 isolated from hot spring sediment

A thermophilic hydrogen producer was isolated from hot spring sediment and identified as Thermoanaerobacterium thermosaccharolyticum KKU19 by biochemical tests and 16S rRNA gene sequence analysis. The strain KKU19 showed the ability to utilize various kinds of carbon sources. Xylose was the preferred carbon source while peptone was the preferred organic nitrogen source. The optimum conditions for hydrogen production and cell growth on xylose were an initial pH of 6.50, temperature of 60 °C, a carbon to nitrogen ratio of 20:1, and a xylose concentration of 10.00 g/L. This resulted in a maximum cumulative hydrogen production, hydrogen production rate and hydrogen yield of 3020 ± 210 mL H₂/L, 3.95 ± 0.20 mmol H₂/L h and 2.09 ± 0.02 mol H₂/mol xylose consumed, respectively. Acetic and butyric acids were the main soluble metabolite products suggesting acetate and butyrate type fermentation.     

Biohydrogen production from pentose-rich oil palm empty fruit bunch molasses: A first trial

Oil palm empty fruit bunch (OPEFB) was pretreated by local plantation industry to increase the accessibility towards its fermentable sugars. This pretreatment process led to the formation of a dark sugar-rich molasses byproduct. The total carbohydrate content of the molasses was 9.7 g/L with 4.3 g/L xylose (C₅H₁₀O₅). This pentose-rich molasses was fed as substrate for biohydrogen production using locally isolated Clostridium butyricum KBH1. The effect of initial pH and substrate concentration on the yield and productivity of hydrogen production were investigated in this study. The best result for the fermentation performed in 70 mL working volume was obtained at the initial reaction condition of pH 9, 150 rpm, 37 °C and 5.9 g/L total carbohydrate. The maximum hydrogen yield was 1.24 mol H₂/mol pentose and the highest productivity rate achieved was 0.91 mmol H₂/L/h. The optimal pH at pH 9 was slightly unusual due to the presence of inhibitors, mainly furfural. The furfural content decreased proportionally as pH was increased. The optimal experiment condition was repeated and continued in fermentation volume of 200 mL. The maximum hydrogen yield found for this run was 1.21 mol H₂/mol pentose while the maximum productivity was 1.1 mmol H₂/L/h. The major soluble metabolites in the fermentation were n-butyric acid and acetic acid.     

Thermophilic dark fermentation of untreated rice straw using mixed cultures for hydrogen production

Biohydrogen production from untreated rice straw using different heat-treated sludge, initial cultivation pH, substrate concentration and particle size was evaluated at 55 °C. The peak hydrogen production yield of 24.8 mL/g TS was obtained with rice straw concentration 90 g TS/L, particle size <0.297 mm and heat-treated sludge S1 at pH 6.5 and 55 °C in batch test. Hydrogen production using sludge S1 resulted from acetate-type fermentation and was pH dependent. The maximum hydrogen production (P), production rate (R_m) and lag (λ) were 733 mL, 18 mL/h and 45 h respectively. Repeated-batch operation showed decreasing trend in hydrogen production probably due to overloading of substrate and its non-utilization. PCR-DGGE showed both hydrolytic and fermentative bacteria (Clostridium pasteurianum, Clostridium stercorarium and Thermoanaerobacterium saccharolyticum) in the repeated-batch reactor, which perhaps in association led to the microbial hydrolysis and fermentation of raw rice straw avoiding the pretreatment step.     

Kinetics of cotton cellulose hydrolysis using concentrated acid and fermentative hydrogen production from hydrolysate

The kinetics of cotton cellulose hydrolysis using concentrated sulfuric acid and the performance of fermentative hydrogen production from the hydrolysate in the batch system was carried out in this study. Effects of sulfuric acid concentrations, cotton cellulose concentrations and operating temperatures on the cotton cellulose hydrolysis were investigated. It was found that cotton cellulose can dissolve completely in sulfuric acid concentration above 55% (by volume) at room temperature. The reduced sugar yields were varied from 64.3 to 73.9% (g R-sugar/g cotton cellulose) with the initial cotton cellulose concentrations of 30-70 g/L at a temperature of 40 °C.The reduced sugar concentrations and the initial pH of biohydrogen production were investigated at 37 °C. It was found that the optimal values of the hydrogen yield and substrate utilization were 0.95 mol H₂/mol R-sugar and 98% with an initial pH of 8.2, when substrate concentration was fixed at 20 g R-sugar/L. The maximum hydrogen yield was 0.99 mol H₂/mol R-sugar at a substrate concentration of 15 g R-sugar/L. Using the Gompertz Equation Model simulation, the maximum hydrogen production rate was 253 mL H₂/h/L at a substrate of 30 g/L and initial pH of 8.4.     

Effect of system optimizing conditions on biohydrogen production from herbal wastewater by slaughterhouse sludge

The study evaluates the biohydrogen production from herbal wastewater as the substrate by the enriched mixed slaughterhouse sludge as the seed source. In the following experiments, batch-fermentations are carried out with the optimum substrate concentrations, fermentation pH and fermentation temperature to observe the effects of H₂ production, hydrogen yield and other fermentation end products at different conditions. The hydrogen production is increased as substrate concentration increased up to 8 g COD/L WW, but drastically decreased at 10 g COD/L WW. When the pH of fermentation is controlled to 6.5, a maximum amount of hydrogen yield could be obtained. The hydrogen production is maximum at 50 °C (930 ± 30 mL/L WW) compared to 30 °C (436 ± 16 mL/L WW). Acid-forming pathway with butyric acid as a major metabolite dominated the metabolic flow during the hydrogen production. The experimental results indicated that effective hydrogen production from the herbal wastewater could be obtained by thermophilic acidogenesis at proper operational conditions.     

Statistical optimization of biohydrogen and ethanol production from crude glycerol by microbial mixed culture

Design of Experiments (DoE) was applied to improve the ability of enriched activity sludge to efficiently convert crude glycerol from biodiesel industry into hydrogen and ethanol, using a very simple synthetic medium. Based on Plackett–Burman screening design, glycerol concentration, temperature and initial pH were identified as significant variables. Box–Behnken design and Response Surface Method (RSM) were then used for optimization. The maximum hydrogen yield of 0.96 mol H₂/mol glycerol was estimated at the temperature of 37.0 °C, initial pH of 7.9 and glycerol concentration of 15.0 g/L. Maximum hydrogen production rate of 2191 mL/L/d was estimated at the temperature of 37.3 °C, initial pH of 8.0 and glycerol concentration of 15.2 g/L. Finally maximum ethanol production of 7.92 g/L was estimated at an initial pH of 8.0 and glycerol concentration of 15.0 g/L (temperature had no significant effect). These results show that it is possible to obtain both, high yield and production of hydrogen and ethanol together, using a very simple synthetic medium, without trace element- and vitamin solution, tryptone or yeast extract.     

Biohydrogen production from sugarcane bagasse hydrolysate by elephant dung: Effects of initial pH and substrate concentration

Pre-heated elephant dung was used as inoculum to produce hydrogen from sugarcane bagasse (SCB) hydrolysate. SCB was hydrolyzed by H₂SO₄ or NaOH at various concentrations (0.25-5% volume) and reaction time of 60 min at 121 °C, 1.5 kg/cm² in the autoclave. The optimal condition for the pretreatment was obtained when SCB was hydrolyzed by H₂SO₄ at 1% volume which yielded 11.28 g/L of total sugar (1.46 g glucose/L; 9.10 g xylose/L; 0.72 g arabinose/L). The maximum hydrogen yield of 0.84 mol H₂/mol total sugar and the hydrogen production rate of 109.55 mL H₂/L day were obtained at the initial pH 6.5 and initial total sugar concentration 10 g/L. Hydrogen-producing bacterium (Clostridium pasteurianum) and non hydrogen-producing bacterium (Flavobacterium sp.) were dominating species in the elephant dung and in hydrogen fermentation broth. Sporolactobacillus sp. was found to be responsible for a low hydrogen yield obtained.     

Dark fermentative hydrogen production from xylose by a hot spring enrichment culture

Dark fermentative hydrogen production by a hot spring culture was studied from different sugars in batch assays and from xylose in continuous stirred tank reactor (CSTR) with on-line pH control. Batch assays yielded hydrogen in following order: xylose > arabinose > ribose > glucose. The highest hydrogen yield in batch assays was 0.71 mol H₂/mol xylose. In CSTR the highest H₂ yield and production rate at 45 °C were 1.97 mol H₂/mol xylose and 7.3 mmol H₂/h/L, respectively, and at 37 °C, 1.18 mol H₂/mol xylose and 1.7 mmol H₂/h/L, respectively. At 45 °C, microbial community consisted of only two bacterial strains affiliated to Clostridium acetobutulyticum and Citrobacter freundii, whereas at 37 °C six Clostridial species were detected. In summary hydrogen yield by hot spring culture was higher with pentoses than hexoses. The highest H₂ production rate and yield and thus, the most efficient hydrogen producing bacteria were obtained at suboptimal temperature of 45 °C for both mesophiles and thermophiles.     

Effect of initial pH,nutrients and temperature on hydrogen production from palm oil mill effluent using thermotolerant consortia and corresponding microbial communities

Thermotolerant consortia were obtained by heat-shock treatment on seed sludge from palm oil mill. Effect of the initial pH (4.5–6.5) on fermentative hydrogen production palm oil mill effluent (POME) showed the optimum pH at 6.0, with the maximum hydrogen production potential of 702.52 mL/L-POME, production rate of 74.54 mL/L/h. Nutrients optimization was investigated by response surface methodology with central composite design (CCD). The optimum nutrients contained 0.25 g urea/L, 0.02 g Na₂HPO₄/L and 0.36 g FeSO₄·7H₂O/L, giving the predicted value of hydrogen production of 1075 mL/L-POME. Validation experiment revealed the actual hydrogen production of 968 mL/L-POME. Studies on the effect of temperature (25–55 °C) revealed that the maximum hydrogen production potential (985.3 mL/L-POME), hydrogen production rate (75.99 mL/L/h) and hydrogen yield (27.09 mL/g COD) were achieved at 55, 45 and 37 °C, respectively. Corresponding microbial community determined by the DGGE profile demonstrated that Clostridium spp. was the dominant species. Clostridium paraputrificum was the only dominant bacterium presented in all temperatures tested, indicating that the strain was thermotolerant.     

Optimization of temperature and light intensity for improved photofermentative hydrogen production using Rhodobacter capsulatus DSM 1710

Photofermentative hydrogen production is influenced by several parameters, including feed composition, pH levels, temperature and light intensity. In this study, experimental results obtained from batch cultures of Rhodobacter capsulatus DSM 1710 were analyzed to locate the maximum levels for the rate and yield of hydrogen production with respect to temperature and light intensity. For this purpose, a 3^k general full factorial design was employed, using temperatures of 20, 30 and 38 °C and light intensities of 100, 200 and 340 W/m². ANOVA results confirmed that these two parameters significantly affect hydrogen production. Surface and contour plots of the regression models revealed a maximum hydrogen production rate of 0.566 mmol H₂/L/h at 27.5 °C and 287 W/m² and a maximum hydrogen yield of 0.326 mol H₂/mol substrate at 26.8 °C and 285 W/m². Validation experiments at the calculated optima supported these findings.     

Hydrogen and methane production in extreme thermophilic conditions in two-stage (upflow anaerobic sludge bed) UASB reactor system

Two-stage hydrogen and methane production in extreme thermophilic (70 °C) conditions was demonstrated for the first time in UASB-reactor system. Inoculum used in hydrogen and methane reactors was granular sludge from mesophilic internal circulation reactor and was first acclimated for extreme thermophilic conditions. In hydrogen reactor, operated with hydraulic retention time (HRT) of 5 h and organic loading rate (OLR) of 25.1 kg COD/m³/d, hydrogen yield was 0.73 mol/mol glucose_added. Methane was produced in second stage from hydrogen reactor effluent. In methane reactor operated with HRT of 13 h and OLR of 7.8 kg COD/m³/d, methane yield was 117.5 ml/g COD_added. These results prove that hydrogen and methane can be produced in extreme thermophilic temperatures, but as batch experiments confirmed, for methane production lower temperature would be more efficient.     

Fermentative hydrogen production by a new mesophilic bacterium Clostridium sp. 6A-5 isolated from the sludge of a sugar mill

The fermentative hydrogen production capability of the newly isolated Clostridium sp. 6A-5 bacterium was studied in a batch cultivation experiment. Various culture conditions (temperature, initial pH, and glucose concentration) were evaluated for their effects on cell growth and hydrogen production (including the yield and rate) of Clostridium sp. 6A-5. Optimal cell growth was observed at 40 °C, initial pH 7.5–8, and glucose concentration 16–26 g/L. The optimal hydrogen yield was obtained at 43 °C, initial pH 8, and glucose concentration 10–16 g/L. Hydrogen began to evolve when cell growth entered the mid-exponential phase and reached the maximum production rate at the late exponential and stationary phases. The maximum hydrogen yield, and rate were 2727 mL/L, and 269.3 mL H₂/L h, respectively. These results indicate that Clostridium sp. 6A-5 is a good candidate for mesophilic fermentative hydrogen production.     

Biological hydrogen production by extremely thermophilic novel bacterium Thermoanaerobacter mathranii A3N isolated from oil producing well

Hydrogen producing novel bacterial strain was isolated from formation water from oil producing well. It was identified as Thermoanaerobacter mathranii A3N by 16S rRNA gene sequencing. Hydrogen production by novel strain was pH and substrate dependent and favored pH 8.0 for starch, pH 7.5 for xylose and sucrose, pH 8.0–9.0 for glucose fermentation at 70 °C. The highest H₂ yield was 2.64 ± 0.40 mol H₂ mol glucose at 10 g/L, 5.36 ± 0.41 mol H₂ mol – sucrose at 10 g/L, 17.91 ± 0.16 mmol H₂ g – starch at 5 g/L and 2.09 ± 0.21 mol H₂ mol xylose at 5 g/L. The maximum specific hydrogen production rates 6.29 (starch), 9.34 (sucrose), 5.76 (xylose) and 4.89 (glucose) mmol/g cell/h. Acetate-type fermentation pathway (approximately 97%) was found to be dominant in strain A3N, whereas butyrate formation was found in sucrose and xylose fermentation. Lactate production increased with high xylose concentrations above 10 g/L.     

Biohydrogen production by Thermoanaerobacterium thermosaccharolyticum TERI S7 from oil reservoir flow pipeline

Thermophilic dark fermentative hydrogen producing bacterial strain, TERI S7, isolated from an oil reservoir flow pipeline located in Mumbai, India, showed 98% identity with Thermoanaerobacterium thermosaccharolyticum by 16S rRNA gene analysis. It produced 1450–1900 ml/L hydrogen under both acidic and alkaline conditions; at a temperature range of 45–60 °C. The maximum hydrogen yield was 2.5 ± 0.2 mol H₂/mol glucose, 2.2 ± 0.2 mol H₂/mol xylose and 5.2 ± 0.2 mol H₂/mol sucrose, when the respective sugars were used as carbon source. The cumulative hydrogen production, hydrogen production rate and specific hydrogen production rate by the strain TERI S7 with sucrose as carbon source was found to be 1704 ± 105 ml/L, 71 ± 6 ml/L/h and 142 ± 13 ml/g/h respectively. Major soluble metabolites produced during fermentation were acetic acid and butyric acid. The strain TERI S7 was also observed to produce hydrogen continuously up to 48 h at pH 3.9.     

High yield simultaneous hydrogen and ethanol production under extreme-thermophilic (70 °C) mixed culture environment

The effect of pH and medium composition on extreme-thermophilic (70 °C) dark fermentative simultaneous hydrogen and ethanol production (process performance and microbial ecology) was investigated. Hydrogen and ethanol yields were optimized with respect to glucose, peptone, FeSO₄, NaHCO₃, yeast extract, trace mineral salts, vitamins, and phosphate buffer concentrations as well as initial pH as independent variables. A combination of low levels of both glucose (≤2 g/L) and vitamin solutions (≤1 mL/L) and high levels of initial pH (≥7), mineral salts solution (≥5 mL/L) and FeSO₄ (≥100 mg/L) stimulated the hydrogen production, while high level of glucose (≥5 g/L) and low levels of both initial pH (≤5.5) and mineral salts solution (≤1 mL/L) enhanced the ethanol production. High yield of simultaneous hydrogen and ethanol production (1.58 mol H₂/mol glucose combined with an ethanol yield of 0.90 mol ethanol/mol glucose) was achieved under extreme-thermophilic mixed culture environment. Results obtained showed that the shift of the metabolic pathways favouring either hydrogen or ethanol production was affected by the change in cultivation conditions (pH and medium composition). The mixed culture in this study demonstrated flexible ability for simultaneous hydrogen and ethanol production, depending on pH and nutrients formulation. The microorganisms involved could be regarded as simultaneous hydrogen/ethanol producers, as hydrogen and ethanol fermentation under all conditions was carried out by a group of extreme-thermophilic bacterial species related to Thermoanaerobacter, Thermoanaerobacterium and Caldanaerobacter.     

A robust and efficient bioprocess of hydrogen production from crude glycerol by Clostridium beijerinckii G117

Clostridia can produce hydrogen (a renewable-biofuel) from crude glycerol (CG). Reportedly, the indigenous CG-impurities (eg.methanol, soap and salt) interfere with clostridial-process, and reduces hydrogen production. Thus, it is important to develop a robust bioprocess to directly utilize native-CG for hydrogen production. In this study, among four Clostridia tested, Clostridium beijerinckii G117 is selected based on its high hydrogen (>290 mL/g) production from CG. Furthermore, optimization of process-parameters enhances hydrogen production from strain G117 by ～5 fold from 1195 ± 45 to 5893 ± 25 mL/L with 2.16 mol/mol yield. The order of impact of process-parameters (optimum value in parenthesis) on hydrogen production is: CG concentration (12.5 g/L)>inoculum size (10%v/v)>inoculum age (12 h)>temperature (39 °C)>initial medium-pH (6.4)>L-cysteine (1 g/L)>operational volume (30 mL)>agitation rate (150 rpm). Notably, this optimized bioprocess records >90% efficiency by determining total mass and electron balances. Interestingly, this optimized bioprocess retains adequate robustness to yield 1.94–2.02 mol/mol hydrogen with elevated CG-impurities including alcohols/salts/surfactants.     

Effects of substrate concentration and hydraulic retention time on hydrogen production from common reed by enriched mixed culture in continuous anaerobic bioreactor

This study aims to investigate the effect of substrate concentration and hydraulic retention time (HRT) on hydrogen production in a continuous anaerobic bioreactor from unhydrolyzed common reed (Phragmites australis) an invasive wetland and perennial grass. The bioreactor has capacity of 1 L and working volume of 600 mL. It was operated at pH 5.5, temperature at 37 °C, hydraulic retention time (HRT) 12 h, and variation of substrate concentration from 40, 50, and 60 g COD/L, respectively. Afterward, the HRT was then varied from 12, 8, to 4 h for checking the optimal biohydrogen production. Each condition was run until reach steady state on hydrogen production rate (HPR) which based on hydrogen percentage and daily volume. The results were obtained the peak of substrate concentration was at the 50 g COD/L with HRT 12 h, average HPR and H₂ concentration were 28.71 mL/L/h and 36.29%, respectively. The hydrogen yield was achieved at 106.23 mL H₂/g CODre. The substrate concentration was controlled at 50 g COD/L for the optimal HRT experiments. It was found that the maximum of average HPR and H₂ concentration were 43.28 mL/L/h and 36.96%, respectively peak at HRT 8 h with the corresponding hydrogen yield of 144.35 mL H₂/g CODre. Finally, this study successful produce hydrogen from unhydrolyzed common reed by enriched mixed culture in continuous anaerobic bioreactor.     

Simultaneous saccharification and fermentation of cellulose for bio-hydrogen production by anaerobic mixed cultures in elephant dung

The objective of this study was to optimize the culture conditions for simultaneous saccharification and fermentation (SSF) of cellulose for bio-hydrogen production by anaerobic mixed cultures in elephant dung under thermophilic temperature. Carboxymethyl cellulose (CMC) was used as the model substrate. The investigated parameters included initial pH, temperature and substrate concentration. The experimental results showed that maximum hydrogen yield (HY) and hydrogen production rate (HPR) of 7.22 ± 0.62 mmol H₂/g CMC_added and 73.4 ± 3.8 mL H₂/L h, respectively, were achieved at an initial pH of 7.0, temperature of 55 °C and CMC concentration of 0.25 g/L. The optimum conditions were then used to produce hydrogen from the cellulose fraction of sugarcane bagasse (SCB) at a concentration of 0.40 g/L (equivalent to 0.25 g/L cellulose) in which an HY of 7.10 ± 3.22 mmol H₂/g cellulose_added. The pre-dominant hydrogen producers analyzed by polymerase chain reaction-denaturing gel gradient electrophoresis (PCR-DGGE) were Thermoanaerobacterium thermosaccharolyticum and Clostridium sp. The lower HY obtained when the cellulose fraction of SCB was used as the substrate might be due to the presence of lignin in the SCB as well as the presence of Lactobacillus parabuchneri and Lactobacillus rhamnosus in the hydrogen fermentation broth.     

Hydrogen production by a marine photosynthetic bacterium, Rhodovulum sulfidophilum P5, isolated from a shrimp pond

A new hydrogen-producing photosynthetic bacterium, designated as Rhodovulum sulfidophilum P5, was enriched and isolated from the sludge of a marine shrimp cultivation farm. During fermentation, hydrogen was mainly produced in the late exponential and stationary phases. The optimum culture conditions of strain P5 for hydrogen production were NaCl concentration of 20 g/L, initial pH of 8, temperature of 30 °C, and light intensity of 100 μmol photons/m² s. The maximum hydrogen yield and rate were 2.56 ± 0.18 mol/mol acetate and 19.4 ± 1.6 mL/L h, respectively. Under optimum culture conditions, the hydrogen conversion efficiencies of P5 from acetate, propionate, and butyrate were (64.62 ± 5.05)%, (17.95 ± 0.72)%, and (41.83 ± 2.68)%, respectively. Taken together, these results suggest that this strain has a high salt tolerance and the potential to be used for biohydrogen production and biological treatment of marine organic wastewater.     

Optimization of fermentative hydrogen production by Enterococcus faecium INET2 using response surface methodology

A newly isolated strain Enterococcus faecium INET2 was used as inoculum for biohydrogen production through dark fermentation. The individual and interactive effect of initial pH, operation temperature, glucose concentration and inoculation amount on the accumulation of hydrogen during fermentation was examined by a Box–Behnken Design (BBD), and hydrogen production process was analyzed at the optimal condition. A significant interactive effect between glucose concentration and pH was observed, the optimal condition was initial pH 7.1, operation temperature 34.8 °C, glucose concentration 11.3 g/L and inoculation amount 10.4%. Hydrogen yield, maximum hydrogen production rate and hydrogen production potential were determined to be 1.29 mol H₂/mol glucose, 86.7 L H₂/L/h and 1.35 L H₂/L. Metabolites analysis showed that E. faecium INET2 followed the pyruvate: formate lyase (Pfl) pathway in first 16 h, followed by the acetate-type fermentation and then shifted to butyrate-type fermentation. Maximum hydrogen production rate was accompanied with a quick formation of acetic acid.