Synthesis,spectral, and thermal characterization of photosensitive poly(ether–ester)s containing α,β‐unsaturated ketone moieties in the main chain derived from 2,6‐bis[4‐(3‐hydroxypropyloxy)‐3‐methoxybenzylidene]cyclohexanone

A series of photosensitive poly(ether–ester)s containing α,β‐unsaturated ketone moieties in the main chain were synthesized from 2,6‐bis[4‐(3‐hydroxypropyloxy)‐3‐methoxybenzylidene]cyclohexanone (BHPMBCH) and aliphatic and aromatic diacid chlorides. The diol precursor, BHPMBCH, was synthesized from 2,6‐bis(4‐hydroxy‐3‐methoxybenzylidene)cyclohexanone and 3‐bromo‐1‐propanol. The solubility of the polymers was tested in various solvents. The intrinsic viscosity of the synthesized polymers, determined by an Oswald viscometer, was found to be 0.06–0.80 g/dL. The molecular structures of the monomer and polymers were confirmed by Fourier transform infrared, ultraviolet–visible, ¹H‐NMR, and ¹³C‐NMR spectral analyses. The thermal properties were studied with thermogravimetric analysis and differential scanning calorimetry. The thermogravimetric analysis data revealed that the polymers were stable up to 220°C and started degrading thereafter. The thermal stability initially increased with increasing spacer length and then decreased due to negative effects of the spacer. The self‐extinguishing properties of the synthesized polymers were studied by the determination of the limiting oxygen index values with Van Krevelen's equation. In addition, the photocrosslinking properties of the polymer chain were studied with UV spectroscopy, and we observed that the rate of photocrosslinking increased significantly with increasing methylene carbon chain length of the acid spacer. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Lignin‐xylaric acid‐polyurethane‐based polymer network systems: Preparation and characterization

Polyurethanes (PU) were synthesized from lignin by first preparing a prepolymer from esterified sugar‐based trihydroxyl compound xylaric acid and a 20 mol % excess of methylene diphenyl diisocyanate. The prepolymer was crosslinked with 5, 10, and 15 wt % of an industrial soda lignin, and polyethylene glycol was used to bring soft segments into the material structure. The total amount of bio‐based starting materials was as high as 35%. Evidence for the reaction between the prepolymer and lignin was observed using Fourier transform infrared spectroscopic analysis and ¹³C nuclear magnetic resonance spectroscopy. The thermal properties of the materials were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The mechanical and viscoelastic properties of the materials were determined by dynamic mechanical analysis (DMA). The glass transition temperatures (T_g) obtained from DSC and DMA showed a trend of increasing T_g with the increasing amount of lignin. A similar trend was observed with TGA for the increasing thermal stability up to 550^oC with the increasing amount of lignin. The lignin‐polyurethanes obtained were stiff materials showing high Young's modulus values. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39714.     

Thermal and mechanical properties of multiple‐component aliphatic degradable polyurethanes

Macroscopic thermal and mechanical properties of complex aliphatic polycarbonate‐based polyurethane (PU) films containing degradable ester units in PU backbone were studied by a combination of several experimental techniques. Differential scanning calorimetry (DSC) revealed that the synthesized oligomeric diol (DL‐L) contributes (in addition to polycarbonate diol) to the formation of soft‐segment domains, while the hard‐segment domains are formed from 1,6‐diisocyanatohexane (HDI) and butane‐1,4‐diol (BD). Three main phase transitions were detected by DSC and by dynamic mechanical thermal analysis. Thermogravimetric analysis (TGA) of two‐component PUs showed that the PU made from DL‐L and HDI is the least thermostable product, while the PU made from polycarbonate diol and HDI is the most stable one. The differences in the thermal stability of different four‐component PUs are not important. Tensile properties very sensitively reflect the changes in composition and in microstructure of PU samples; the best tensile properties exhibits the degradable sample containing the equimolar ratio of hydroxyl groups of macrodiol, oligomeric diol DL‐L and butane‐1,4‐diol. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41872.     

Synthesis and characterization of polyurethane hybrids: Influence of the polydimethylsiloxane linear chain and silsesquioxane cubic structure on the thermal and mechanical properties of polyurethane hybrids

The structural effects of polydimethylsiloxane (PDMS) or polyhedral oligosilsesquioxanes (POSSs) on the thermomechanical properties of polyurethane (PU) networks were studied. An ester–amine‐functionalized silsesquioxane and a PDMS macromer were synthesized, and the macromer (10 wt %) was crosslinked with the PU prepolymer to obtain PU networks. The synthesized macromers and hybrids were characterized with Fourier transform infrared, ¹H‐NMR, ¹³C‐NMR, and ²⁹Si‐NMR spectroscopy techniques. The influence of POSS cubes on the thermal and mechanical properties of the polymer network films was studied comparatively with the similarly functionalized PDMS linear chain via thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA) measurements. The degradation pattern of the POSS‐incorporated PU nanocomposites was almost the same as that of the PU network synthesized from the linear PDMS macromer. The differences in the char yields and activation energies of the hybrids reflected the enhancement of the thermal properties of the nanohybrids. The TGA and DSC curves of the macromers suggested that the thermal properties of the macromers not only depended on either the PDMS or POSS inorganic core but also depended on the organic peripheral attached to the inorganic core. The glass‐transition temperatures of the nanohybrids were higher than those of the linear‐PDMS‐incorporated hybrids. The storage modulus values increased 3‐fold upon the incorporation of POSS rigid groups into the PU hybrids in comparison with the flexible PDMS‐chain‐incorporated PU hybrids. The DMA measurements showed a long‐range rubbery plateau region for all the PU hybrids, with high storage modulus and tan δ values showing the structural homogeneity of the crosslinked networks. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis,characterization, and acoustic properties of new soluble polyurethanes based on 2,2′‐[1,4‐phenylenebis(nitrilomethylylidene)diphenol and 2,2′‐[4,4′‐methylene‐di‐2‐methylphenylene‐1,1′‐bis(nitrilomethylylidene)]diphenol

Eight novel polyurethanes based on 2,2′‐[1,4‐phenylenebis(nitrilomethylylidene)]diphenol and 2,2′‐[4,4′‐methylene‐di‐2‐methylphenylene‐1,1′‐bis(nitrilomethylylidene)]diphenol acting as hard segments with two aromatic and two aliphatic diisocyanates (4,4′‐diphenylmethane diisocyanate, toluene 2,4‐diisocyanate, isophorone diisocyanate, and hexamethylene diisocyanate) were prepared and characterized with Fourier transform infrared, UV spectrophotometry, fluorescence spectroscopy, ¹H‐NMR and ¹³C‐NMR spectroscopy, thermogravimetric analysis, and differential thermal analysis. All the polyurethanes contained domains of semicrystalline and amorphous structures, as indicated by X‐ray diffraction. The acoustic properties and solubility parameters were calculated with the group contribution method. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

抗氧剂Irganox1010对聚氨酯弹性体老化性能的影响

通过傅里叶红外变换光谱、热分析与力学性能测试,研究了抗氧剂四(3,5-二叔丁基-4-羟基苯丙酸)季戊四醇酯(Irganox1010)对聚氨酯弹性体老化性能的影响。力学测试结果表明,150℃下老化48h后,未加抗氧剂的聚氨酯弹性体的拉伸强度与老化前相比较下降11.6%,而添加抗氧剂的聚氨酯弹性体的拉伸强度与老化前相比较没有下降。热重分析、差示扫描量热分析和红外光谱分析结果表明,抗氧剂Irganox1010能阻碍聚氨酯分子链的断裂,减缓材料的老化,因此能促进聚氨酯弹性体的抗老化性能。     

Synthesis and characterization of biodegradable crosslinked polymers from 5‐hydroxylevulinic acid and α,ω‐diols

Novel biodegradable chemically crosslinked polymers, poly(5‐hydroxylevulinic acid‐co‐α,ω‐diol)s (PHLA‐diols), were synthesized from 5‐hydroxylevulinic acid and α,ω‐diols and characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis. The gel content, swelling ratio, tensile properties, and hydrolytic degradation behaviors were also measured and assessed. The glass‐transition temperature of the PHLA‐diols could be adjusted within a wide range (?50 to 30°C) by the type and feed ratio of the diol. Because of the low glass‐transition temperature and crosslink structure, they exhibited certain elastic properties. The tensile modulus, strength, and elongation at break measured at 37°C were 1.4–6.3 MPa, 0.8–1.6 MPa, and 10–25%, respectively. These polymers could be hydrolytically degraded. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of difunctional acids on the physicochemical,thermal, and mechanical properties of polyester polyol‐based polyurethane coatings

Polyester polyol (PP)‐based polyurethanes (PUs) consisting of two difunctional acids [1,4‐cyclohexanedicarboxylic acid (CHDA) and 1,6‐adipic acid (AA)] and also two diols [1,4‐cyclohexanedimethanol (CHDM) and 1,6‐hexanediol (HDO)] were synthesized by a two‐step procedure with a variable feed ratio of CHDA to AA but fixed ratio of CHDM and HDO. The prepared PPs and/or PUs were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction spectroscopy, and atomic force microscopy. The effects of difunctional acids on the thermal, mechanical, and dynamic mechanical thermal properties of PPs or PU films were investigated by thermogravimetry analysis, differential thermogravimetry and dynamic mechanical thermal analysis. The results show that PP exhibits a lowest viscosity with the mole fraction of CHDA and AA at 3 : 7 whereas it delivers a lowest melting point with the mole fraction at 9 : 1. After PPs being cross‐linked by isocyanate trimers, the impact resistance, shear strength and glass transition temperature increase the mixed‐acid formulations with increasing the content of CHDA. In detail, the resultant PU almost simultaneously exhibits the best mechanical and thermal properties when the mole fraction of CHDA and AA is kept constant at 9 : 1, thus giving rise to a high glass transition temperature of 56.4°C and a onset decomposition temperature of 350°C, and also delivering a balanced toughness and hardness with an impact resistance of 100 J/g and storage modulus as high as 10⁹ Pa. This path for synthesis of PP‐based PU provides a design tool for high performance polymer coatings. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41246.     

Preparation,morphology, and properties of polyurethane–urea elastomers derived from sulphone‐containing aromatic diamine

An aromatic diamine containing both sulfone and diphenyl ether groups, bis[4‐(4‐aminophenoxy)phenyl]sulfone, was synthesized in a two‐step way, whose structure was confirmed through Fourier transform infrared spectrometry, nuclear magnetic resonance, and elemental analysis. Then, the obtained BAPS was used as the chain‐extender to prepare a polyurethane–urea elastomer, whose morphology, thermal stability and mechanical properties were examined by means of attenuated total reflection, DSC, thermogravimetric analysis, dynamic mechanical thermal analysis, and stress–strain measurements. The results showed that the PUU elastomer based on BAPS showed good heat‐resistance and mechanical properties. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3554–3561, 2007     

Efficient synthesis of zwitterionic sulfobetaine group functional polyurethanes via “click” reaction

A novel polyurethane material containing zwitterionic sulfobetaine groups has been synthesized using the copper‐catalyzed 1,3‐dipolar cycloaddition (azide‐alkyne click chemistry). A standard two‐step polyaddition method was used to produce the well‐defined polyurethane based on polycarbonatediol (PCDL) with alkyne groups. These polyurethanes containing alkyne units were then efficiently clicked using 3‐((2‐azidoethyl)dimethylammonio)propane‐1‐sulfonate (DMPS‐N₃). The novel PU material was characterized by ¹H NMR, Fourier transform infrared (FTIR) spectrometer, gel permeation chromatography (GPC), elemental analysis, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). This facile “click” reaction provides a useful tool for the development of novel functional polyurethanes for biomedical applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

New thermoplastic segmented polyurethanes with hard segments derived from 4,4′‐diphenylmethane diisocyanate and methylenebis(1,4‐phenylenemethylenethio)dialcanols

New thermoplastic poly(ether–urethane)s and poly(carbonate–urethane)s were synthesized by a one‐step melt polymerization from poly(oxytetramethylene) diol (PTMO) and poly(hexane‐1,6‐diyl carbonate) diol (PHCD) as soft segments, 4,4′‐diphenylmethane diisocyanate, and 2,2′‐[methylenebis(1,4‐phenylenemethylenethio)]diethanol, 3,3′‐[methylenebis(1,4‐phenylenemethylenethio)]dipropan‐1‐ol or 6,6′‐[methylenebis(1,4‐phenylenemethylenethio)]dihexan‐1‐ol as unconventional chain extenders. The effects of the kind and amount of the polymer diol and chain extender used on the structure and properties of the polymers were studied. The polymers were examined by Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction analysis, atomic force microscopy, differential scanning calorimetry, thermogravimetric analysis (TGA), TGA coupled with FTIR spectroscopy, and Shore hardness and tensile testing. The obtained high‐molecular‐weight polymers showed elastomeric or plastic properties. Generally, the PTMO‐based polymers exhibited significantly lower glass‐transition temperatures (up to ?48.1 vs ?1.4°C), a higher degree of microphase separation, and ordering in hard‐segment domains in comparison with the corresponding PHCD‐based ones. Moreover, it was observed that the polymers with the PTMO soft segments showed poorer tensile strengths (up to 36.5 vs 59.6 MPa) but higher elongations at break. All of the polymers exhibited a relatively good thermal stability. Their temperatures of 1% mass loss were in the range 270–320°C. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polyurethane/amino‐grafted multiwalled carbon nanotube nanocomposites: Microstructure,thermal, mechanical,and rheological properties

A mixture of two different polyols, (polytetramethylene ether glycol and polydimethylsiloxane), were employed to synthesize a new structure of polyurethane (PU) with methylene diphenyl diisocyanate (MDI) and 1,4‐butanediol as chain extender. PU nanocomposites containing variable amount (0.3, 0.5, 1, and 3 wt %) of amino‐grafted multiwalled carbon nanotubes (NH₂‐MWNT) were prepared via in situ polymerization. The dispersion of NH₂‐MWNT into polymer matrix was investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Fourier transform infrared spectroscopy (FT‐IR) confirmed the urethane‐urea chemical bonding between the PU chains and the NH₂‐MWNT. Thermal stabilities of the nanocomposites were examined with thermogravimetric analysis (TGA) and the results indicated a remarkable improvement with increasing NH₂‐MWNT contents. The results of dynamic mechanical thermal analysis (DMTA) including storage modulus (E′) and glass transition temperature (T_g), as well as tensile properties demonstrated that the yield strength, strain‐at‐break, and young modulus were enhanced by increasing NH₂‐MWNT content. Rheological behavior including complex viscosity and storage and loss moduli of the PU nanocomposites improved with increasing NH₂‐MWNT loading, as well. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44411.     

Mechanical and thermal properties of glass bead–filled nylon‐6

The mechanical and thermal properties of glass bead–filled nylon‐6 were studied by dynamic mechanical analysis (DMA), tensile testing, Izod impact, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) tests. DMA results showed that the incorporation of glass beads could lead to a substantial increase of the glass‐transition temperature (T_g) of the blend, indicating that there existed strong interaction between glass beads and the nylon‐6 matrix. Results of further calculation revealed that the average interaction between glass beads and the nylon‐6 matrix deceased with increasing glass bead content as a result of the coalescence of glass beads. This conclusion was supported by SEM observations. Impact testing revealed that the notch Izod impact strength of nylon‐6/glass bead blends substantially decreased with increasing glass bead content. Moreover, static tensile measurements implied that the Young's modulus of the nylon‐6/glass bead blends increased considerably, whereas the tensile strength clearly decreased with increasing glass bead content. Finally, TGA and DSC measurements indicated that the thermal stability of the blend was obviously improved by incorporation of glass beads, whereas the melting behavior of the nylon‐6 remained relatively unchanged with increasing glass bead content. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1885–1890, 2004     

Thermal characterization of carbon‐nanofiber‐reinforced tetraglycidyl‐4,4′‐diaminodiphenylmethane/4,4′‐diaminodiphenylsulfone epoxy composites

The thermal properties of carbon nanofibers (CNF)/epoxy composites, composed of tetraglycidyl‐4,4′‐diaminodiphenylmethane (TGDDM) resin and 4,4′‐diaminodiphenylsulfone (DDS) as a curing agent, were investigated with differential scanning calorimetry (DSC), thermogravimetric analysis, and dynamic mechanical thermal analysis. DSC results showed that the presence of CNF had no pronounced influence on the heat of the cure reaction. However, the incorporation of CNF slightly improved the thermal stability of the epoxy. Furthermore, the storage modulus of the TGDDM/DDS epoxy was significantly enhanced, whereas the glass‐transition temperature was not significantly affected, upon the incorporation of CNFs. The storage modulus of 5 wt % CNF/epoxy composites at 25°C was increased by 35% in comparison with that of the pure epoxy. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 295–298, 2006     

Proton‐induced crosslinking of CR 6‐2 polycarbonate

CR 6‐2 polycarbonate samples were irradiated using different fluences (10¹¹–10¹⁴ ions/cm²) of 1 MeV protons. The structural modifications in the proton‐irradiated CR 6‐2 samples have been studied as a function of fluence using different characterization techniques such as X‐ray diffraction, intrinsic viscosity of the liquid samples, as a measure of the mean molecular mass, Fourier transform infrared spectroscopy, thermogravimetric analysis, differential thermal analysis, refractive index, color difference, and mechanical properties. The results indicate that the irradiation of CR 6‐2 detector at the fluence range 1 × 10¹²–5 × 10¹⁴ ions/cm² causes intermolecular crosslinking and allows the formation of covalent bonds between different chains, leading to a more compact structure of CR 6‐2 polymer, which resulted in an improvement in its thermal, optical, and mechanical properties. Also, this crosslinking reduces the ordering structure and increases the amorphous regions that enhance the polymer resilience. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of poly(vinyl 2,4,6‐trinitrophenylacetal) as a new energetic binder

Poly(vinyl alcohol) was modified by an aldehyde acetal reaction with 2,4,6‐trinitrophenylacetaldehyde to give a new energetic polymer poly(vinyl 2,4,6‐trinitrophenylacetal) (PVTNP). The structure of PVTNP was characterized by elemental analysis, ultraviolet–visible spectroscopy, Fourier transform infrared spectroscopy, and nuclear magnetic resonance spectra. The glass‐transition temperature of PVTNP was evaluated by differential scanning calorimetry (DSC), and the thermal stability of PVTNP was tested by differential thermal analysis (DTA) and thermogravimetric analysis (TGA). DSC traces showed that the PVTNP polymer had one single glass‐transition temperature at 105.3°C. DTA and TGA curves showed that the thermooxidative degradation of PVTNP in air was a three‐step reaction, and the percentage of degraded PVTNP reached nearly 100% at 650°C. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Thermal and surface characterization of polyurethane–urea clay nanocomposite coatings

This paper reports synthesis and characterization of polyurethane–urea (PU‐urea) and the nanocomposites derived from the PU‐urea with silicate clays. Organophilic montmorillonite cotreated by cetyl trimethyl ammonium bromide (CTAB) was synthesized and used to prepare PU‐urea/montmorillonite nanocomposites coatings. PU‐ureas were prepared from polyethylene glycol (PEG), polypropylene glycol (PPG), trimethylol propane (TMP), and 4,4′‐diphenylmethane diisocyanate (MDI) by reacting excess diisocyanate with polyether glycols. The excess isocyanate of the prepolymers was cured with atmospheric moisture. The synthesized moisture cured PU‐urea and nanocomposites were characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetric (DSC), and angle resolved X‐ray photoelectron spectroscopy (AR‐XPS). The thermal stability of the PU‐urea nanocomposites was higher relative to the mother PU‐urea films. DSC results showed a slight enhancement in the soft segment glass transition temperature after 3 wt % clay loading. The surface properties showed an enrichment of the soft segment toward the surface. An enhancement in the hard segment composition in the nanocomposite coatings has resulted in enhancing the phase mixing process. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2393–2401, 2006     

Morphology and properties of polyurethane/poly(methyl methacrylate) interpenetrating polymer networks by Co60–γ ray

PU/PMMA IPNs were first synthesized using Co⁶⁰–γ radiation. The morphology, glass transition behavior, and mechanical properties of the formed IPNs have been studied by TEM, DSC, and electron tensile testing machine. The TEM micrographs and the results of DSC showed that Co⁶⁰–γ radiation was effective for obtaining small volume sizes of phase domains in IPNs. The structure with two continuous phases occurs in the content range of 40% to 70% PU. The ability of interpenetration enhanced with increasing the content of the crosslinking agents. The mechanical properties of IPNs reflected very good synergistic behavior.     

Mechanical and thermal properties of poly(butylene succinate)/poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) biodegradable blends

Biodegradable polymer blends of poly(butylene succinate) (PBS) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) were prepared with different compositions. The mechanical properties of the blends were studied through tensile testing and dynamic mechanical thermal analysis. The dependence of the elastic modulus and strength data on the blend composition was modeled on the basis of the equivalent box model. The fitting parameters indicated complete immiscibility between PBS and PHBV and a moderate adhesion level between them. The immiscibility of the parent phases was also evidenced by scanning electron observation of the prepared blends. The thermal properties of the blends were studied through differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The DSC results showed an enhancement of the crystallization behavior of PBS after it was blended with PHBV, whereas the thermal stability of PBS was reduced in the blends, as shown by the TGA thermograms. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42815.     

Thermal analysis of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) irradiated under vacuum

Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) was irradiated by ⁶⁰Co γ‐rays (doses of 50, 100 and 200 kGy) under vacuum. The thermal analysis of control and irradiated PHBV, under vacuum was carried out by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The tensile properties of control and irradiated PHBV were examined by using an Instron tensile testing machine. In the thermal degradation of control and irradiated PHBV, a one‐step weight loss was observed. The derivative thermogravimetric curves of control and irradiated PHBV confirmed only one weight‐loss step change. The onset degradation temperature (T_o) and the temperature of maximum weight‐loss rate (T_p) of control and irradiated PHBV were in line with the heating rate (°C min^?1). T_o and T_P of PHBV decreased with increasing radiation dose at the same heating rate. The DSC results showed that ⁶⁰Co γ‐radiation significantly affected the thermal properties of PHBV. With increasing radiation dose, the melting temperature (T_m) of PHBV shifted to a lower value, due to the decrease in crystal size. The tensile strength and fracture strain of the irradiated PHBV decreased, hence indicating an increased brittleness. Copyright © 2004 Society of Chemical Industry