Self‐induced vibrations of a DU96‐W‐180 airfoil in stall

This work presents an analysis of two‐dimensional (2D) and three‐dimensional (3D) non‐moving, prescribed motion and elastically mounted airfoil computational fluid dynamics (CFD) computations. The elastically mounted airfoil computations were performed by means of a 2D structural model with two degrees of freedom. The computations aimed at investigating the mechanisms of both vortex‐induced and stall‐induced vibrations related to a wind turbine blade at standstill conditions. In this work, a DU96‐W‐180 airfoil was used in the angle‐of‐attack region potentially corresponding to stall‐induced vibrations. The analysis showed significant differences between the aerodynamic stability limits predicted by 2D and 3D CFD computations. A general agreement was reached between the prescribed motion and elastically mounted airfoil computations. 3D computations indicated that vortex‐induced vibrations are likely to occur at modern wind turbine blades at standstill. In contrast, the predicted cut‐in wind speed necessary for the onset of stall‐induced vibrations appeared high enough for such vibrations to be unlikely. Copyright © 2013 John Wiley & Sons, Ltd.     

Vortex‐induced vibrations of a DU96‐W‐180 airfoil at 90° angle of attack

This work presents an analysis of vortex‐induced vibrations of a DU96‐W‐180 airfoil in deep stall at a 90° angle of attack, based on 2D and 3D Reynolds Averaged Navier Stokes and 3D Detached Eddy Simulation unsteady Computational Fluid Dynamics computations with non‐moving, prescribed motion and elastically mounted airfoil suspensions. Stationary vortex‐shedding frequencies computed in 2D and 3D Computational Fluid Dynamics differed. In the prescribed motion computations, the airfoil oscillated in the direction of the chord line. Negative aerodynamic damping, found in both 2D and 3D Computational Fluid Dynamics computations with moving airfoil, showed in the vicinity of the stationary vortex‐shedding frequency computed by 2D Computational Fluid Dynamics. A shorter time series was sufficient to verify the sign of the aerodynamic damping in the case of the elastic computations than the prescribed motion. Even though the 2D computations seemed to be capable of indicating the presence of vortex‐induced vibrations, the 3D computations seemed to reflect the involved physics more accurately. Copyright © 2013 John Wiley & Sons, Ltd.     

Vortex‐induced vibrations on a modern wind turbine blade

This article investigates the aero‐elastic response of the DTU 10‐MW RWT blade in deep stall conditions with angles of attack in the vicinity of 90 degrees. The simulations were conducted with the high‐fidelity fluid–structure interaction simulation tool HAWC2CFD employing the multi‐body‐based structural model of HAWC2 and the incompressible computational fluid dynamics solver EllipSys3D. The study utilizes detached eddy simulation computations and considers the three‐dimensional blade geometry including blade twist and taper. A preliminary frequency analysis of the load variations on a stiff blade showed that an inclined inflow with a velocity component along the blade axis can trigger a spanwise correlated vortex shedding over large parts of the blade. Moderate wind speeds were sufficient to generate vortex shedding with frequencies close to the first edgewise eigenfrequency of the blade. Aero‐elastic computations of the elastic blade confirmed the findings of the frequency analysis. Inflow conditions with inclination angles between Ψ = 20° and Ψ = 55° and relatively low to moderate wind speeds between V = 16 and V = 26ms^?1 were sufficient to trigger severe edgewise blade vibrations with blade tip amplitudes of several metres. The investigated inflow conditions are considered realistic and might occur when the wind turbine is idling or standing still and the yaw system is unable to align the wind turbine with the incoming wind. Copyright © 2016 John Wiley & Sons, Ltd.     

Spectral analysis of New MEXICO standstill measurements to investigate vortex shedding in deep stall

Spectral analysis was performed on the time series data computed from pressure measurements on the New MEXICO (Model Rotor Experiments under Controlled Conditions) rotor in standstill conditions. As a priori, 3D airfoil polars were recreated from standstill measurements and compared against 2D airfoil polars and flat plate theory results to verify the measurements. The spectral analysis revealed the presence of dominant shedding frequencies for certain ranges of the geometric angle of attack. Two dominant shedding modes were identified: One was associated with bluff body vortex shedding, and the other was associated with low Strouhal number shedding. No dominant shedding frequencies were observed for angles of attack beyond 50°. The research improves on our current understanding of the unsteady nature of the stall regime, along with providing insight into the existence of vortex‐induced vibrations on a wind turbine in standstill conditions.     

Improved Modal Dynamics of Wind Turbines to Avoid Stall‐induced Vibrations

Stall‐induced edgewise blade vibrations have occasionally been observed on three‐bladed wind turbines over the last decade. Experiments and numerical simulations have shown that these blade vibrations are related to certain vibration modes of the turbines. A recent experiment with a 600 kW turbine has shown that a backward whirling mode associated with edgewise blade vibrations is less aerodynamically damped than the corresponding forward whirling mode. In this article the mode shapes of the particular turbine are analysed, based on a simplified turbine model described in a multi‐blade formulation. It is shown that the vibrations of the blades for the backward and forward edgewise whirling modes are different, which can explain the measured difference in aerodynamic damping. The modal dynamics of the entire turbine is important for stability assessments; blade‐only analysis can be misleading. In some cases the modal dynamics may even be improved to avoid stall‐induced vibrations. Copyright © 2003 John Wiley & Sons, Ltd.     

Wind turbine blade vibration at standstill conditions—the effect of imposing lag on the aerodynamic response of an elastically mounted airfoil

The present study investigated physical phenomena related to stall‐induced vibrations potentially existing on wind turbine blades at standstill conditions. The study considered two‐dimensional airfoil sections while it omitted three‐dimensional effects. In the study, a new engineering‐type computational model for the aeroelastic response of an elastically mounted airfoil was used to investigate the influence of temporal lag in the aerodynamic response on the aeroelastic stability in deep stall. The study indicated that even a relatively low lag significantly increases the damping of the model. A comparison between the results from a model with lag imposed on all force components with the results from a model with lag imposed exclusively on the lift showed only marginal difference between the damping in the two cases. A parameter study involving positions of the elastic hinge point and the center of gravity indicated that the stability is relatively independent of these parameters. Another parameter study involving spring constants showed that the stability of each mode is dependent only on the spring constant acting in the direction of the leading motion of the mode. An investigation of the influence of the added mass terms showed that only the pitch‐rate and flapwise‐acceleration terms have any influence on the stability. An investigation of three different profiles showed that the stability is heavily dependent on the aerodynamic characteristics of the profiles—mainly on the lift. It was also shown that only the edgewise mode is unstable in deep stall. Moreover, independent of the amount of temporal lag in the aerodynamic response of the model, the inflow‐angle region in the vicinity of 180° remains unstable in the edgewise mode. Therefore, this inflow‐angle region may create stability problems in real life. The other type of vibrations potentially present at standstill conditions is vortex‐induced, being outside the scope of the present study. Copyright © 2014 John Wiley & Sons, Ltd.     

New vortex‐lift and tangential‐force models for HAWT aerodynamic load prediction

Horizontal axis wind turbines (HAWTs) experience three‐dimensional rotational and unsteady aerodynamic phenomena at the rotor blades sections. These highly unsteady three‐dimensional effects have a dramatic impact on the aerodynamic load distributions on the blades, in particular, when they occur at high angles of attack due to stall delay and dynamic stall. Unfortunately, there is no complete understanding of the flow physics yet at these unsteady 3D flow conditions, and hence, the existing published theoretical models are often incapable of modelling the impact on the turbine response realistically. The purpose of this paper is to provide an insight on the combined influence of the stall delay and dynamic stall on the blade load history of wind turbines in controlled and uncontrolled conditions. New dynamic stall vortex and nonlinear tangential force coefficient modules, which integrally take into account the three dimensional rotational effect, are also proposed in this paper. This module along with the unsteady influence of turbulent wind speed and tower shadow is implemented in a blade element momentum (BEM) model to estimate the aerodynamic loads on a rotating blade more accurately. This work presents an important step to help modelling the combined influence of the stall delay and dynamic stall on the load history of the rotating wind turbine blades which is vital to have lighter turbine blades and improved wind turbine design systems.     

Computational fluid dynamics simulation of the aerodynamics of a high solidity,small‐scale vertical axis wind turbine

A computational fluid dynamics simulation was performed for a small‐scale, high solidity (σ = 0.48) H‐type Darrieus vertical axis wind turbine. Two‐dimensional unsteady Reynolds‐averaged Navier–Stokes equations were solved for the turbine numerical model, which has a large stationary domain and smaller rotating subdomain connected by a sliding mesh interface. The simulation results were first validated against steady‐state airfoil data. The model was then used to solve for three rotating blades with constant ambient flow velocity (Re = 360,000) over numerous blade speed ratios. The high solidity and the associated low blade speed ratio and rotational speed of the turbine result in complex flow–blade interaction mechanisms. These include dynamic stall resulting in vortex shedding, vortex impingement on the source blade and significant flow momentum extraction causing reduced power production from the downstream blade pass. Copyright © 2011 John Wiley & Sons, Ltd.     

A simple model for deep dynamic stall conditions

The present study is focused on modeling of dynamic stall behavior of a pitching airfoil. The deep stall regime is in particular considered. A model is proposed, which has a low implementation and computational complexity but yet is able to deal with different types of dynamic stall conditions, including those characterized by multiple vortex shedding at the airfoil leading edge. The proposed model is appraised against an extensive data set of experimental (α,C_L) curves for NACA0012. The results of an existing widely used model, having comparable complexity, are also shown for comparison. The proposed model is able to well reproduce not only the classic curves of deep dynamic stall but also the curves characterized by lift oscillations at high angles of attack due to the shedding of multiple vortices. Furthermore, the model appears to be robust to variations of its parameters from the optimal values and of the airfoil geometry. Finally, the model is successfully implemented in a commercial CFD software and applied to the simulation of a vertical axis wind turbine within the actuator cylinder approach. The accuracy of the prediction of the turbine power coefficient in the whole rotation cycle is very good for the optimal working condition of the turbine, for which the model parameters were calibrated. Fairly good accuracy is also obtained in significantly different working conditions without any further calibration.     

Assessment of a comprehensive aeroelastic tool for horizontal‐axis wind turbine rotor analysis

This paper presents the development of a computational aeroelastic tool for the analysis of performance, response and stability of horizontal‐axis wind turbines. A nonlinear beam model for blades structural dynamics is coupled with a state‐space model for unsteady sectional aerodynamic loads, including dynamic stall effects. Several computational fluid dynamics structural dynamics coupling approaches are investigated to take into account rotor wake inflow influence on downwash, all based on a Boundary Element Method for the solution of incompressible, potential, attached flows. Sectional steady aerodynamic coefficients are extended to high angles of attack in order to characterize wind turbine operations in deep stall regimes. The Galerkin method is applied to the resulting aeroelastic differential system. In this context, a novel approach for the spatial integration of additional aerodynamic states, related to wake vorticity and dynamic stall, is introduced and assessed. Steady‐periodic blade responses are evaluated by a harmonic balance approach, whilst a standard eigenproblem is solved for aeroelastic stability analyses. Drawbacks and potentialities of the proposed model are investigated through numerical and experimental comparisons, with particular attention to rotor blades unsteady aerodynamic modelling issues. Copyright © 2016 John Wiley & Sons, Ltd.     

A new stall delay algorithm for predicting the aerodynamics loads on wind turbine blades for axial and yawed conditions

Stall delay is a complicated phenomenon that has gained for many years the attention of industry and academics in the fields of helicopter and wind turbine aerodynamics. Since most of the potential flow theories still rely on the use of 2D aerofoil data for simulating loads on a rotating blade, less degree of accuracy is expected because of 3D rotational effects. In this work, a new model for correcting the 2D steady aerodynamic data for 3D effects is presented. The model can reduce the uncertainty in the blade design process and, subsequently, make wind turbines more cost‐effective. This model combines the stall delay model of Corrigan and Schillings, a modified version of an inviscid stall delay model, a new modification factor to account for the effect of the angle of attack changes and a new tip loss factor. Furthermore, the model applies the use of the separation factor of Du and Selig to evaluate the area on the rotor disc where stall delay is most prominent. The new stall delay model was embedded in a free‐wake vortex model to estimate the aerodynamic loads on the National Renewable Energy Laboratory Phase VI rotor blades consisting of the S809 aerofoil sections. The results in this study confirm the validity of the 3D corrections by the proposed new model under both axial and yawed flow conditions. Copyright © 2017 John Wiley & Sons, Ltd.     

新型变桨立轴风力机涡效应分析

该文旨在通过变桨来改善升力型立轴风力机叶片气动特性,提高风力机最大运行效率。针对设计尖速比下风能利用系数较低的问题,提出减小叶片小攻角范围,增大叶片大攻角工作范围,以重点改善叶片低性能区域的气动特性为出发点,提高风能利用系数新变桨思路。以采用NACA0012翼型、2 m高和2 m旋转直径的两叶片H型风力机为研究对象,从涡理论来分析和比较在最佳尖速比为5的条件下,附着涡、尾随涡、脱体涡和桨距角对攻角、切向力和功率输出的影响规律。研究结果表明:变桨后,叶片的攻角、切向力和输出功率在原最大值两侧均有明显提高,拓宽了叶片高性能的工作区域;涡系中脱体涡对叶片气动特性影响最大,其中在上盘面影响较小,在下盘面影响较大;变桨前后涡系对上盘面的差异较小,对下盘面的影响差异较明显;变桨后,下盘面的叶片的涡尾迹弯曲程度在加大。     

HAWT dynamic stall response asymmetries under yawed flow conditions

Horizontal axis wind turbines can experience significant time‐varying aerodynamic loads, potentially causing adverse effects on structures, mechanical components and power production. As designers attempt lighter and more flexible wind energy machines, greater accuracy and robustness will become even more critical in future aerodynamics models. Aerodynamics modelling advances, in turn, will rely on more thorough comprehension of the three‐dimensional, unsteady, vortical flows that dominate wind turbine blade aerodynamics under high‐load conditions. To experimentally characterize these flows, turbine blade surface pressures were acquired at multiple span locations via the NREL Phase IV Unsteady Aerodynamics Experiment. Surface pressures and associated normal force histories were used to characterize dynamic stall vortex kinematics and normal force amplification. Dynamic stall vortices and normal force amplification were confirmed to occur in response to angle‐of‐attack excursions above the static stall threshold. Stall vortices occupied approximately one‐half of the blade span and persisted for nearly one‐fourth of the blade rotation cycle. Stall vortex convection varied along the blade, resulting in dramatic deformation of the vortex. Presence and deformation of the dynamic stall vortex produced corresponding amplification of normal forces. Analyses revealed consistent alterations to vortex kinematics in response to changes in reduced frequency, span location and yaw error. Finally, vortex structures and kinematics not previously documented for wind turbine blades were isolated. Published in 2000 by John Wiley & Sons, Ltd.     

Estimating the angle of attack from blade pressure measurements on the National Renewable Energy Laboratory phase VI rotor using a free wake vortex model: yawed conditions

Wind turbine design codes for calculating blade loads are usually based on a blade element momentum (BEM) approach. Since wind turbine rotors often operate in off‐design conditions, such as yawed flow, several engineering methods have been developed to take into account such conditions. An essential feature of a BEM code is the coupling of local blade element loads with an external (induced) velocity field determined with momentum theory through the angle of attack. Local blade loads follow directly from blade pressure measurements as performed in the National Renewable Energy Laboratory (NREL) phase IV campaign, but corresponding angles of attack cannot (on principle) be measured. By developing a free wake vortex method using measured local blade loads, time‐dependent angle of attack and induced velocity distributions are reconstructed. In a previous paper, a method was described for deriving such distributions in conjunction with blade pressure measurements for the NREL phase VI wind turbine in axial (non‐yawed) conditions. In this paper, the same method is applied to investigate yawed conditions on the same turbine. The study considered different operating conditions in yaw in both attached and separated flows over the blades. The derived free wake geometry solutions are used to determine induced velocity distributions at the rotor blade. These are then used to determine the local (azimuth time dependent) angle of attack, as well as the corresponding lift and drag for each blade section. The derived results are helpful to develop better engineering models for wind turbine design codes. Copyright © 2008 John Wiley & Sons, Ltd.     

Integrating a new flow separation model and the effects of the vortex shedding for improved dynamic stall predictions using the Beddoes–Leishman method

This paper aims at improving dynamic stall predictions on the S809 aerofoil under 2D flow conditions. The method is based on the well‐known Beddoes–Leishman model; however, a new flow separation model and a noise generator are integrated to improve the predictions in the load fluctuations, including those induced by vortex shedding on the aerofoil upper surface. The flow separation model was derived from a unique approach based on the combined use of unsteady aerodynamic loads measurements, the Beddoes–Leishman model and a trial‐and‐error technique. The new flow separation model and random noise generator were integrated in the Beddoes–Leishman model through a new solution algorithm. The numerical predictions of the unsteady lift and drag coefficients were then compared with the Ohio State University measurements for the oscillating S809 aerofoil at several reduced frequencies and angles of attack. The results using the proposed models showed improved correlation with the experimental data. Hysteresis loops for the aerodynamic coefficients are in good agreement with measurements. Copyright © 2016 John Wiley & Sons, Ltd.     

Experimental and numerical investigations of aerodynamic loads and 3D flow over non‐rotating MEXICO blades

This paper presents the experimental and numerical study on MEXICO wind turbine blades. Previous work by other researchers shows that large deviations exist in the loads comparison between numerical predictions and experimental data for the rotating MEXICO wind turbine. To reduce complexities and uncertainties, a non‐rotating experimental campaign has been carried out on MEXICO blades Delft University of Technology. In this new measurement, quasi‐2D aerodynamic characteristics of MEXICO blades on three spanwise sections are measured at different inflow velocities and angles of attack. Additionally, RANS simulations are performed with OpenFOAM‐2.1.1 to compare numerical results against measured data. The comparison and analysis of aerodynamic loads on the blade, where three different airfoil families and geometrical transition regions are used, show that for attached flow condition, RANS computation predicts excellent pressure distribution on the NACA airfoil section (r/R = 0.92) and good agreement is observed on the DU (r/R = 0.35) and RISØ (r/R = 0.60) airfoil sections. Unexpected aerodynamic characteristics are observed at the intermediate transition regions connecting the RISØ and DU airfoils, where sudden lift force drop is found at the radial position r/R = 0.55. Through numerical flow visualization, large‐scale vortical structures are observed on the suction side of the blade near the mid‐span. Moreover, counter‐rotating vortices are generated behind the blade at locations where unexpected loads occurs. Consequently, the RISØ airfoil could not give expected 2D aerodynamic characteristics because of upwash/downwash effects induced by these counter‐rotating vortices, which make 3D effects play an important role in numerical modeling when calculating the aerodynamic loads for MEXICO rotor. ©2016 The Authors Wind Energy Published by John Wiley & Sons Ltd     

Parametric dependencies of the yawed wind‐turbine wake development

Yaw misalignment is currently being treated as one of the most promising methods for optimizing the power of wind farms. Therefore, detailed knowledge of the impact of yaw on the wake development is necessary for a range of operating conditions. This study numerically investigates the wake development behind a single yawed wind turbine operating at different tip‐speed ratios and yaw angles using the actuator‐line method in the spectral‐element code Nek5000. It is shown that depending on the tip‐speed ratio, the blade loading varies along the azimuth, resulting in a wake that is asymmetric in both the horizontal and vertical directions. Large tip‐speed ratios as well as large yaw angles are shown to decrease the vertical asymmetry of the yaw‐induced counter‐rotating vortex pair. Both parameters have the effect that they increase the spanwise force induced by yaw relative to the wake rotation. However, while the strength of the counter‐rotating vortex pair in the far wake increases with yaw angle, it is shown to decrease with the tip‐speed ratio. The vertical shift in the wake center is found to be highly dependent on the yaw angle and the tip‐speed ratio. These detailed insights into the yawed wake are important when optimizing potential downstream turbines.     

Frequency Analyses for Mechanism Research of Unsteady Flow Inside Three Dimensional Compressor Cascade

Numerical simulations are carried out for unsteady flow field of certain kind of 3D compressor cascade. Emphasis is laid on vortex shedding and frequency analysis in a compressor cascade. Numerical simulations using unsteady Reynolds-averaged viscous turbulent equations are carried out. The results show that the flows in separated areas and wake areas are characterized as periodic or quasi-periodic vortex shedding and the frequencies of vortex shedding vary with incidences and Mach number. At the same Mach number, the frequency of vortex shedding will decrease as the incidence increases. Yet, the frequency will increase as the Mach number increases at the same incidence. In the same computation case, the frequency of vortex shedding will vary along the span of blade. The frequency is smaller at the middle of the span than that at the hub.     

A vortex panel model for the simulation of the wake flow past a vertical axis wind turbine in dynamic stall

A 2D vortex panel model with a viscous boundary layer formulation has been developed for the numerical simulation of a vertical axis wind turbine (VAWT), including the operation in dynamic stall. The model uses the ‘double wake’ concept to reproduce the main features of the unsteady separated flow, including the formation and shedding of strong vortical structures and the wake–blade interaction. The potential flow equations are solved together with the integral boundary layer equations by using a semi‐inverse iterative algorithm. A new criterion for the reattachment of the boundary layer during the downstroke of a dynamically stalled aerofoil is implemented. The model has been validated against experimental data of steady aerofoils and pitching aerofoils in dynamic stall at high and low Reynolds numbers (Re = 1.5 × 10⁶ and Re = 5 × 10⁴). For the low Reynolds number case, time‐resolved 2D particle image velocimetry (PIV) measurements have been performed on a pitching NACA 0012 aerofoil in dynamic stall. The PIV vorticity fields past the oscillating aerofoil are used to test the model capability of capturing the formation, growth and release of the strong leading edge vortex that characterizes the dynamic stall. Furthermore, the forces extracted from the PIV velocity fields are compared with the predicted ones for a quantitative validation of the model. Finally, the model is applied to the computation of the wake flow past a VAWT in dynamic stall; the predicted vorticity fields and forces are in good agreement with phase‐locked PIV data and CFD‐DES available in the literature. Copyright © 2012 John Wiley & Sons, Ltd.