Studies on the solvent extraction of rare earths from nitrate media with a combination of di‐(2‐ethylhexyl)phosphoric acid and sec‐octylphenoxyacetic acid

BACKGROUND: Di‐(2‐ethylhexyl)phosphoric acid (D2EHPA, H₂A₂) has been used extensively in hydrometallurgy for the extraction of rare earths, but it has some limitations. Synergistic extraction has attracted much attention because of its enhanced extractabilities and selectivities. In the present study, sec‐octylphenoxyacetic acid (CA12, H₂B₂) was added into D2EHPA systems for the extraction and separation of rare earths. The extraction mechanism of lanthanum with the mixtures and the separation of lanthanoids and yttrium were investigated. RESULTS: The synergistic enhancement coefficient for La³⁺ extracted with D2EHPA + CA12 was calculated as 3.63. La³⁺ was extracted as La(NO₃)₂H₂A₂B with the mixture. The logarithm of the equilibrium constant was determined as 0.80. The thermodynamic functions, ΔH, ΔG, and ΔS were calculated to be 4.03 kJ mol^?1, ? 1.96 kJ mol^?1, and 20.46 J mol^?1 K^?1, respectively. The mixtures have synergistic effects on Ce³⁺, Nd³⁺, and Y³⁺, with an especially strong synergistic effect on Y³⁺. Neither synergistic nor antagonistic effects on Dy³⁺ and weak antagonistic effects on Lu³⁺ were found. CONCLUSION: Mixtures of D2EHPA and CA12 exhibit evident synergistic effects when used to extract La³⁺ from nitric solution. The stoichiometries of the extracted complexes have been determined by graphical and numerical methods to be La(NO₃)₂H₂A₂B with the mixture. The extraction is an endothermic process. The mixture exhibits different extraction effects on rare earths, which provides possibilities for the separation of Y³⁺ from Ln³⁺ at a proper ratio of D2EHPA and CA12. Copyright © 2008 Society of Chemical Industry     

Extraction and separation of rare earths from chloride medium with mixtures of 2‐ethylhexylphosphonic acid mono‐(2‐ethylhexyl) ester and sec‐nonylphenoxy acetic acid

BACKGROUND: 2‐ethylhexylphosphonic acid mono‐(2‐ethylhexyl) ester (HEHEHP, H₂A₂) has been applied extensively to the extraction of rare earths. However, there are some limitations to its further utilization and the synergistic extraction of rare earths with mixtures of HEHEHP and another extractant has attracted much attention. Organic carboxylic acids are also a type of extractant employed for the extraction of rare earths, e.g. naphthenic acid has been widely used to separate yttrium from rare earths. Compared with naphthenic acid, sec‐nonylphenoxy acetic acid (CA100, H₂B₂) has many advantages such as stable composition, low solubility, and strong acidity in the aqueous phase. In the present study, the extraction of rare earths with mixtures of HEHEHP and CA100 has been investigated. The separation of the rare earth elements is also studied. RESULTS: The synergistic enhancement coefficient decreases with increasing atomic number of the lanthanoid. A significant synergistic effect is found for the extraction of La³⁺ as the complex LaH₂ClA₂B₂ with mixtures of HEHEHP and CA100. The equilibrium constant and thermodynamic functions obtained from the experimental results are 10^?0.92 (K_AB), 13.23 kJ mol^?1 (ΔH), 5.25 kJ mol^?1 (ΔG), and 26.75 J mol^?1 K^?1 (ΔS), respectively. CONCLUSION: Graphical and numerical methods have been successfully employed to determine the stoichiometries for the extraction of La³⁺ with mixtures of HEHEHP and CA100. The mixtures have different extraction effects on different rare earths, which provides the possibility for the separation of yttrium from heavy rare earths at an appropriate ratio of HEHEHP and CA100. Copyright © 2009 Society of Chemical Industry     

Solvent extraction studies of Sm(III) from nitrate medium and separation factors of rare earth elements with mixtures of sec‐octylphenoxyacetic acid and 1,10‐phenthroline

BACKGROUND: Liquid–liquid extraction is widely used for the separation of rare earths, among which synergistic extraction has attracted more and more attention. Numerous types of synergistic extraction systems have been applied to rare earths with high extraction efficiency and selectivities. In the present study, mixtures of sec‐octylphenoxyacetic acid (CA12, H₂A₂) and 1,10‐phenanthroline (phen, B) have been used for the extraction of rare earths from nitrate medium. The stoichiometry of samarium(III) extraction has been studied using the methods of slope analysis and constant molar ratio. The possibility of using synergistic extraction effects to separate rare earths has also been studied. RESULTS: Mixtures of CA12 and phen display synergistic effects in the extraction of rare earth elements giving maximum enhancement coefficients of 5.5 (La); 13.7 (Nd); 15.9 (Sm); 24.5 (Tb); 45.4 (Yb) and 12.3 (Y). Samarium(III) is extracted as SmHA₄B₃ with mixtures of CA12 and phen instead of SmHA₄ when extracted with CA12 alone. The calculated logarithm of the equilibrium constant is 6.0 and the thermodynamic functions, ΔH, ΔG, and ΔS, have been calculated as 4.3 kJ mol^?1, ? 33.7 kJ mol^?1 and 129.7 J mol^?1 K^?1, respectively. CONCLUSION: Mixtures of CA12 and phen exhibit synergistic effects on rare earth elements. Graphical and numerical methods have been successfully used to determine their stoichiometries. The different synergistic effects may provide the possibility of separating yttrium from heavy lanthanoids at an appropriate ratio of CA12 and phen. Copyright © 2010 Society of Chemical Industry     

Synergistic extraction and separation study of rare earth elements from nitrate medium by mixtures of sec‐nonylphenoxy acetic acid and 2,2′‐bipyridyl

BACKGROUND: Synergistic extraction has been proven to enhance extractability and selectivity. Numerous types of synergistic extraction systems have been applied to rare earth elements, among which sec‐nonylphenoxyacetic acid (CA100) has proved to be an excellent synergistic extractant. In this study, the synergistic enhancement of the extraction of holmium(III) from nitrate medium by mixtures of CA100 (H₂A₂) with 2,2′‐bipyridyl (bipy, B) in n‐heptane has been investigated. The extraction of all other lanthanides (except polonium) and yttrium by the mixtures in n‐heptane has also been studied. RESULTS: Mixtures of CA100 and bipy have significant synergistic effects on all rare earth elements, for example holmium(III) is extracted as Ho(NO₃)₂HA₂B with the mixture instead of HoH₂A₅, which is extracted by CA100 alone. The thermodynamic functions, ΔH^o, ΔG^o, and ΔS^o have been calculated as 2.96 kJ mol^?1, ? 6.23 kJ mol^?1, and 31.34 J mol^?1 K^?1, respectively. CONCLUSION: Methods of slope analysis and constant molar ratio have been successfully applied to study the synergistic extraction stoichiometries of holmium(III) by mixtures of CA100 and bipy. Mixtures of these extractants have also shown various synergistic effects with other rare earth elements, making it possible to separate them. Thus CA100 + bipy may be used to separate yttrium from other lanthanides at appropriate ratios of the extractants. Copyright © 2011 Society of Chemical Industry     

Synthesis,physical properties,and crystallization of optically active poly(L‐phenyllactic acid) and poly(L‐phenyllactic acid‐co‐L‐lactic acid)

Optically active poly(L ‐phenyllactic acid) (Ph‐PLLA), poly(L ‐lactic acid) (PLLA), and poly(L ‐phenyllactic acid‐co‐L ‐lactic acid) with weight‐average molecular weight exceeding 6 × 10³ g mol^?1 were successfully synthesized by acid catalyzed direct polycondensation of L ‐phenyllactic acid and/or L ‐lactic acid in the presence of 2.5–10 wt % of p‐toluenesulfonic acid. Their physical properties and crystallization behavior were investigated by differential scanning calorimetry, thermogravimetry, and polarimetry. The absolute value of specific optical rotation ([α]) for Ph‐PLLA (?38 deg dm^?1 g^?1 cm³) was much lower than that of [α] for PLLA (?150 deg dm^?1 g^?1 cm³), suggesting that the helical nature was reduced by incorporation of bulky phenyl group. PLLA was crystallizable during solvent evaporation, heating from room temperature, and cooling from the melt. Incorporation of a very low content of bulky phenyllactyl units even at 4 mol % suppressed the crystallization of L ‐lactyl unit sequences during heating and cooling, though the copolymers were crystallizable for L ‐phenylactyl units up to 6 mol % during solvent evaporation. The activation energy of thermal degradation (ΔE_td) for Ph‐PLLA (200 kJ mol^?1) was higher than that for PLLA (158 kJ mol^?1). The ΔE_td for the copolymers increased with an increase in L ‐phenyllactyl unit content. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Kinetic study of ytterbium(III) extraction from sulfate medium with Cyanex 923

The kinetics of ytterbium(III) extraction from sulfate medium with Cyanex 923 in heptane has been investigated with a constant interfacial cell with laminar flow, which aimed to identify the extraction regime, reaction zone and rate equations. It was found that the extraction rate of ytterbium(III) increased linearly with stirring speed and specific interfacial area. The activation energy E_a (9.56 kJ mol^?1), activation enthalpy ΔH^± (7.05 kJ mol^?1), activation entropy ΔS^±₂₉₈ (?0.31 kJ mol^?1) and Gibbs free energy of activation ΔG^±₂₉₈ (98.3 kJ mol^?1) were calculated from the dependence of extraction rate on temperature. The experiential rate equations were obtained by investigating the influence of the concentration of various species on the extraction rate. A diffusion regime has been deduced from evidence of the linear dependence of extraction rate on stirring speed and the low value of the activation energy. The liquid–liquid interface is most probably the reaction zone in view of the linear dependence of extraction rate on specific interfacial area, the high interfacial activity and low water‐solubility of extractant. Thus the mass transfer rate is controlled by interfacial film diffusion of species. Copyright © 2007 Society of Chemical Industry     

Syntheses and characterization of polystyrene‐supported 2,5‐dimercapto‐1,3,4‐thiodiazole and its sorption behavior for Pd(II), Pt(IV), and Au(III)

A type of chelating resin crosslinking polystyrene‐supported 2,5‐dimercapto‐1,3,4‐thiodiazole (also called bismuththiol I, BMT), containing sulfur and nitrogen atoms, was prepared. The structure of PS‐BMT was confirmed by FTIR, elemental analysis, and X‐ray photoelectron spectroscopy (XPS). Adsorption of Pd(II), Pt(IV), and Au(III) was investigated. The capacity of PS‐BMT to adsorb Pd(II) and Pt(IV) was 0.190 and 0.033 mmol/g, respectively. The adsorption dynamics of Pd(II) showed that adsorption was controlled by liquid film diffusion and that the apparent activation energy, E_a, was 32.67 kJ/mol. The Langmuir model was better than the Freundlich model in describing the isothermal process of Pd(II), and the ΔG, ΔH, and ΔS values calculated were ?0.33 kJ/mol, 26.29 kJ/mol, and 87.95 J mol^?1 K^?1, respectively. The mechanisms of adsorption of Pd(II), Pt(IV), and Au(III) were confirmed by XPS. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 631–637, 2006     

Synthesis and characterization of polystyrene‐supported glucosamine resin and its adsorption behavior for Au(III)

A novel chelating resin, crosslinking polystyrene‐supported glucosamine (PS‐GA), was prepared and its structure was confirmed by FTIR, elemental analysis, and X‐ray photoelectron spectroscopy. The adsorption properties of PS‐GA for Au(III) were investigated. PS‐GA resin possessed excellent enriching property to Au(III) ions and adsorption proportion E% could reach to about 90 shortly after 3 h. The adsorption dynamics of Au(III) showed that the adsorption was controlled by liquid film diffusion and the apparent activation energy E_a was 12.91 kJ mol^?1. Both Langmuir model and Freundlich model could describe the isothermal process of Au(III), and ΔG, ΔH, ΔS values were calculated. The mechanism of adsorption for Au(III) was confirmed by FTIR, SEM, and XPS. The results showed that redox reaction occurred and both coordination and ion‐exchange existed simultaneously in the adsorption. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4581–4586, 2006     

Polymerization of acrylonitrile catalyzed by single yttrium tris(2,6‐di‐tert‐butyl‐4‐methyl phenolate)

Polymerization of acrylonitrile was carried out using yttrium tris(2,6‐di‐tert‐butyl 4‐methyl‐phenolate) (Y(OAr)₃) as single component catalyst for the first time. The effects of concentrations of the monomer and catalyst, kinds of rare earth element and solvent, as well as temperature and polymerization time were investigated. The overall activation energy of polymerization in n‐hexane and THF mixture is 18.3 kJ mol^?1. Polyacrylonitriles (PANs) obtained by using Y(OAr)₃ in n‐hexane and THF mixture at 50 °C are predominantly atactic, while yellow PANs obtained in DMF under the same conditions have a syndiotactic‐rich configuration (>50%), and their highly branched and/or cyclized structures have also been found. © 2002 Society of Chemical Industry     

Solvent extraction and separation of rare earths from chloride media using α-aminophosphonic acid extractant HEHAMP

Solvent extraction and separation of rare earths (REs: La ~ Lu, plus Y and Sc) by a novel synthesized extractant, (2-ethylhexylamino)methyl phosphonic acid mono-2-ethylhexyl ester (HEHAMP, abbreviated as H₂A₂), were investigated in chloride medium. The favorable separation factors (SFs) between adjacent heavy REs suggested that HEHAMP has a better separation performance than P507. The extracted complex of trivalent REs was determined to be REClH₂A₄ by the slope analysis method. Thermodynamic parameters (ΔH, ΔG, and ΔS) of Lu were calculated as 7.47 kJ mol^?1, ?6.05 kJ mol^?1, and 45.4 J mol^?1 K^?1 at 298.15 K, respectively, which indicate that the extraction reaction of Lu is an endothermic process. The loading capacity of 30% (v/v) HEHAMP toward Lu(III), Yb(III), and Y(III) was about 15.17 g Lu₂O₃/L, 14.46 g Yb₂O₃/L, and 12.64 g Y₂O₃/L, respectively. HCl is the most efficient stripping acid, and 92% of the loaded Yb(III) can be stripped by one-stage stripping with 2 mol/L HCl.     

Syntheses and adsorption properties for Hg2+ of chelating resin of crosslinked polystyrene‐supported 2,5‐dimercapto‐1,3,4‐thiodiazole

A novel chelating resin with functional group containing S and N atoms was prepared using chloromethylated polystyrene and 2,5‐dimercapto‐1,3,4‐thiodiazole (also called bismuththiol I, BMT) as materials. Its structure was characterized by infrared spectra and elementary analysis. The results showed that the content of the functional group was 2.07 mmol BMT g^?1 resin, 47% of which were in the form of monosubstitution (PS‐BMT‐1) and 53% in the form of double substitution (PS‐BMT‐2). The adsorption for mercury ion was investigated. The adsorption dynamics showed that the adsorption was controlled by liquid film diffusion. Increasing the temperature was beneficial to adsorption. The Langmuir model was much better than the Freundlich model to describe the isothermal process. The adsorption activation energy (E_a), ΔG, ΔH, and ΔS values calculated were 18.56 kJ·mol^?1, ‐5.99 kJ·mol^?1, 16.38 kJ·mol^?1, and 37.36, J·mol^?1·K^?1, respectively. The chelating resin could be easily regenerated by 2% thiourea in 0.1 mol·L^?1 HCl with higher effectiveness. Five adsorption–desorption cycles demonstrated that this resin was suitable for repeated use without considerable change in adsorption capacity. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1646–1652, 2004     

Computed Thermodynamic and Explosive Properties of 1‐Azido‐2‐nitro‐2‐azapropane (ANAP)

Some thermodynamic and explosive properties of the recently reported 1‐azido‐2‐nitro‐2‐azapropane (ANAP) have been determined in a combined computational ab initio (MP2/aug‐cc‐pVDZ) and EXPLO5 (Becker–Kistiakowsky–Wilson's equation of state, BKW EOS) study. The enthalpy of formation of ANAP in the liquid phase was calculated to be Δ_fH°, ANAP(l)=+297.1 kJ mol⁻¹. The heat of detonation (Q_v), the detonation pressure (P), and the detonation velocity of ANAP were calculated to be Q_v=−6088 kJ kg⁻¹, P=23.8 GPa, D=8033 m s⁻¹. A mixture of ANAP and tetranitromethane (TNM) was investigated in an attempt to tailor the impact sensitivity of ANAP, but results obtained indicate that the mixture is almost as sensitive as pure ANAP. On the other hand, ANAP and TNM were found to be chemically compatible (¹H, ¹³C, ¹⁴N NMR; DSC) and a 1 : 1 mixture (by weight) of both components was calculated to have superior explosive properties than either of the individual components: Q_v=−6848 kJ kg⁻¹, P=27.0 GPa, D=8284 m s⁻¹.     

Blue fluorescent conductive poly(9,10‐di(1‐naphthalenyl)‐2‐vinylanthracene) homopolymer and its highly soluble copolymers with styrene or 9‐vinylcarbazole

A new blue fluorescent monomer, 9,10‐di(1‐naphthalenyl)‐2‐vinylanthracene, was designed and synthesized in good yield. Its homopolymer poly(9,10‐di(1‐naphthalenyl)‐2‐vinylanthracene) (P(ADN)) and soluble conductive vinyl copolymers poly[(9,10‐di(1‐naphthalenyl)‐2‐vinylanthracene)‐co‐styrene] (P(ADN‐co‐S)) and poly[(9,10‐di(1‐naphthalenyl)‐2‐vinylanthracene)‐co‐(9‐vinylcarbazole)] (P(ADN‐co‐VK)) were synthesized using free radical solution polymerization. All the polymers showed high glass transition mid‐point temperatures (203 to 237 °C) and good thermal stabilities. The photoluminescence emission of the copolymers was similar to that of P(ADN) (with two maxima at 423 and 442 nm). The lifetimes of P(ADN‐co‐S) (6.82 to 7.91 ns) were all slightly less than that of P(ADN) (8.40 ns). The lifetime of P(ADN‐co‐VK) increased from 7.8 to 8.8 ns with an increase in VK content. The fluorescence quantum yields of P(ADN‐co‐S) showed an overall increasing tendency from 0.42 to 0.58. The quantum efficiencies of P(ADN‐co‐VK) decreased from 0.36 to 0.19 with an increase of VK fraction. With increasing S/VK content, the highest occupied molecular orbital of P(ADN‐co‐S)/P(ADN‐co‐VK) ranged from ?5.58 to ?5.73 eV, which was similar to that of P(ADN) (?5.71 eV). The band gaps of P(ADN‐co‐S) and P(ADN‐co‐VK) were about 2.97 eV, which were equal to that of P(ADN), and smaller than that of 2‐methyl‐9,10‐di(1‐naphthalenyl)anthracene (MADN) (3.04 eV) and poly(9‐vinylcarbazole) (3.54 eV). Preliminary electroluminescence results were obtained for a homojunction device with the configuration ITO/MoO₃ (20 nm)/P(ADN)/LiF (1 nm)/Al (100 nm), which achieved only 30–50 cd m^?2, due to P(ADN) having a low mobility of 4.7 × 10^?8 cm² V^?1 s^?1 compared to that of its model compound MADN of 6.5 × 10^?4 cm² V^?1 s^?1. © 2013 Society of Chemical Industry     

Kinetic and thermodynamic investigation of Arthrospira (Spirulina) platensis fed‐batch cultivation in a tubular photobioreactor using urea as nitrogen source

BACKGROUND: Fed‐batch culture allows the cultivation of Arthrospira platensis using urea as nitrogen source. Tubular photobioreactors substantially increase cell growth, but the successful use of this cheap nitrogen source requires a knowledge of the kinetic and thermodynamic parameters of the process. This work aims at identifying the effect of two independent variables, temperature (T) and urea daily molar flow‐rate (U), on cell growth, biomass composition and thermodynamic parameters involved in this photosynthetic cultivation. RESULTS: The optimal values obtained were T = 32 °C and U = 1.16 mmol L^?1 d^?1, under which the maximum cell concentration was 4186 ± 39 mg L^?1, cell productivity 541 ± 5 mg L^?1 d^?1 and yield of biomass on nitrogen 14.3 ± 0.1 mg mg^?1. Applying an Arrhenius‐type approach, the thermodynamic parameters of growth (ΔH* = 98.2 kJ mol^?1; ΔS* = ? 0.020 kJ mol^?1 K^?1; ΔG* = 104.1 kJ mol^?1) and its thermal inactivation ( kJ mol^?1; kJ mol^?1 K^?1; kJ mol^?1) were estimated. CONCLUSIONS: To maximize cell growth T and U were simultaneously optimized. Biomass lipid content was not influenced by the experimental conditions, while protein content was dependent on both independent variables. Using urea as nitrogen source prevented the inhibitory effect already observed with ammonium salts. Copyright © 2012 Society of Chemical Industry     

Synthesis,Crystal Structure,and Thermal Behavior of 3‐(4‐Aminofurazan‐3‐yl)‐4‐(4‐nitrofurazan‐3‐yl)furazan (ANTF)

The energetic material 3‐(4‐aminofurazan‐3‐yl)‐4‐(4‐nitrofurazan‐3‐yl)furazan (ANTF) with low melting‐point was synthesized by means of an improved oxidation reaction from 3,4‐bis(4′‐aminofurazano‐3′‐yl)furazan. The structure of ANTF was confirmed by ¹³C NMR spectroscopy, mass spectrometry, and the crystal structure was determined by X‐ray diffraction. ANTF crystallized in monoclinic system P2₁/c, with a crystal density of 1.785 g cm⁻³ and crystal parameters a=6.6226(9) Å, b=26.294(2) Å, c=6.5394(8) Å, β=119.545(17)°, V=0.9907(2) nm³, Z=4, μ=0.157 mm⁻¹, F(000)=536. The thermal stability and non‐isothermal kinetics of ANTF were studied by differential scanning calorimetry (DSC) with heating rates of 2.5, 5, 10, and 20 K min⁻¹. The apparent activation energy (E_a) of ANTF calculated by Kissinger's equation and Ozawa's equation were 115.9 kJ mol⁻¹ and 112.6 kJ mol⁻¹, respectively, with the pre‐exponential factor lnA=21.7 s⁻¹. ANTF is a potential candidate for the melt‐cast explosive with good thermal stability and detonation performance.     

Effect of Temperature on Kinetics and Adsorption Profile of Endothermic Chemisorption Process: –Tm(III)–PAN Loaded PUF System

Abstract

The sorption behavior of 3.18×10^?6 mol l^?1 solution of Tm(III) metal ions onto 7.25 mg l^?1 of 1‐(2‐pyridylazo)‐2‐naphthol (PAN) loaded polyurethane foam (PUF) has been investigated at different temperatures i.e. 303 K, 313 K, and 323 K. The maximum equilibration time of sorption was 30 minutes from pH 7.5 buffer solution at all temperatures. The various rate parameters of adsorption process have been investigated. The diffusional activation energy (ΔE_ads) and activation entropy (ΔS_ads) of the system were found to be 22.1±2.6 kJ mol^?1 and 52.7±6.2 J mol^?1 K^?1, respectively. The thermodynamic parameters such as enthalpy (ΔH), entropy (ΔS), and Gibbs free energy (ΔG) were calculated and interpreted. The positive value of ΔH and negative value of ΔG indicate that sorption is endothermic and spontaneous in nature, respectively. The adsorption isotherms such as Freundlich, Langmuir, and Dubinin–Radushkevich isotherm were tested experimentally at different temperatures. The changes in adsorption isotherm constants were discussed. The binding energy constant (b) of Langmuir isotherm increases with temperature. The differential heat of adsorption (ΔH_diff), entropy of adsorption (ΔS_diff) and adsorption free energy (ΔG_ads) at 313 K were determined and found to be 38±2 kJ mol^?1, 249±3 J mol^?1 K^?1 and –40.1±1.1 kJ mol^?1, respectively. The stability of sorbed complex and mechanism involved in adsorption process has been discussed using different thermodynamic parameters and sorption free energy.     

Structural and Preliminary Explosive Property Characterizations of New 3,4,5‐Triamino‐1,2,4‐triazolium (Guanazinium) Salts

Two new highly stable energetic salts were synthesized in reasonable yield by using the high nitrogen‐content heterocycle 3,4,5‐triamino‐1,2,4‐triazole and resulting in its picrate and azotetrazolate salts. 3,4,5‐Triamino‐1,2,4‐triazolium picrate (1) and bis(3,4,5‐triamino‐1,2,4‐triazolium) 5,5′‐azotetrazolate (2) were characterized analytically and spectroscopically. X‐ray diffraction studies revealed that protonation takes place on the nitrogen N1 (crystallographically labelled as N2). The sensitivity of the compounds to shock and friction was also determined by standard BAM tests revealing a low sensitivity for both. B3LYP/6–31G(d, p) density functional (DFT) calculations were carried out to determine the enthalpy of combustion (Δ_cH (1) =−3737.8 kJ mol⁻¹, Δ_cH (2) =−4577.8 kJ mol⁻¹) and the standard enthalpy of formation (Δ_fH° (1) =−498.3 kJ mol⁻¹, (Δ_fH° (2) =+524.2 kJ mol⁻¹). The detonation pressures (P (1) =189×10⁸ Pa, P (2) =199×10⁸ Pa) and detonation velocities (D (1) =7015 m s⁻¹, D (2) =7683 m s⁻¹) were calculated using the program EXPLO5.     

Synthesis,properties and pyrolysis of siloxane‐ and imide‐modified epoxy resin cured with siloxane‐containing dianhydride

Hydrosilylation of nadic anhydride with tetramethyl disiloxane yielded 5,5′‐(1,1,3,3‐tetramethyl disiloxane‐1,3‐diyl)‐bis‐norborane‐2,3‐dicarboxylic anhydride (I), which further reacted with 4‐aminophenol to give N,N′‐bis(4‐hydroxyphenyl)‐5,5′‐bis‐(1,1,3,3‐tetramethyl disiloxane‐1,3‐diyl)‐bis‐norborane‐2,3‐dicarboximide (II). Epoxidation of II with excess epichlorohydrin formed a siloxane‐ and imide‐modified epoxy oligomer (ie diglycidyl ether of N,N′‐bis(4‐hydroxyphenyl)‐5,5′‐bis(1,1,3,3‐tetramethyl disiloxane‐1,3‐diyl)‐bis‐norborane‐2,3‐dicarboximide) (III). Equivalent ratios of III/I of 1/1 and 1/0.8 were prepared and cured to produce crosslinked materials. Thermal mechanical and dynamic mechanical properties were investigated by TMA and DMA, respectively. It was noted that each of these two materials showed a glass transition temperature (T_g) higher than 160 °C with moderate moduli. The thermal degradation kinetics was studied with dynamic thermogravimetric analysis (TGA) and the estimated apparent activation energies were 111.4 kJ mol^?1 (in N₂), 117.1 kJ mol^?1 (in air) for III/I = 1/0.8, and 149.2 kJ mol^?1 (in N₂), 147.6 kJ mol^?1 (in air) for III/I = 1/1. The white flaky residue of the TGA char was confirmed to be silicon dioxide, which formed a barrier at the surface of the polymer matrix and, in part, accounted for the unique heat resistance of this material. Copyright © 2005 Society of Chemical Industry     

Preparation of poly(styrene‐b‐2‐hydroxyethyl acrylate) block copolymer using reverse iodine transfer polymerization

Reverse iodine transfer polymerizations (RITP) of 2‐h‐ydroxyethyl acrylate (HEA) were performed in N,N‐dimethylformamide at 75°C using AIBN as initiator. Poly(2‐hydroxyethyl acrylate) (PHEA) with M_n = 3300 g mol^?1 and M_w/M_n <1.5 were obtained. Homopolymerization of styrene in RITP was also carried out under similar conditions using toluene as solvent. The resulting iodo‐polystyrene (PS‐I) with (M_{n, SEC} = 607 g mol^?1, polydispersity index (PDI) = 1.31) was used as a macroinitiator for the synthesis of amphiphilic block copolymers based on HEA with controlled well‐defined structure. Poly(styrene‐b‐2‐hydroxyethyl acrylate) (PS‐b‐PHEA) with M_n = 13,000 g mol^?1 and polydispersity index (M_w/M_n) = 1.4 was obtained, copolymer composition was characterized using ¹H‐NMR and FTIR, whereas SEC and gradient HPLC were used to confirm the formation of block copolymer and the living character of polymer chains. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012