Temperature and pH responsive hydrogels based on polyethylene glycol analogues and poly(methacrylic acid) via click chemistry

A novel temperature responsive copolymer, poly[2‐(2‐methoxyethoxy)ethyl methacrylate‐co‐oligo(ethylene glycol)methacrylate‐co‐N‐hydroxymethyl acrylamide] [P(MEO₂MA‐co‐OEGMA‐co‐HMAM)], was synthesized by atom transfer radical polymerization. pH responsive poly(methacrylic acid) (PMAA) was synthesized by reversible addition‐fragmentation chain transfer polymerization. After the hydroxyl groups on P(MEO₂MA‐co‐OEGMA‐co‐HMAM) were transformed into azide groups and the carboxyl groups on PMAA were transformed into alkyne groups respectively, a novel temperature and pH responsive hydrogel was fabricated by click chemistry between the azide‐P(MEO₂MA‐co‐OEGMA‐co‐HMAM) and alkyne‐PMAA in the presence of CuSO₄ and sodium ascorbate in aqueous solution. The rheological kinetics of gel formation demonstrated that gelation had commenced within 5 min at 25 °C, since then the storage modulus (G′) was higher than the loss modulus (G″). SEM images of hydrogel morphology and the swelling ratios of hydrogel at different temperatures and pH proved that the formed hydrogel had temperature and pH sensitivities. Bovine serum albumin was used as a model to evaluate the sustained release of the hydrogel; the results indicated that the hydrogel was a promising candidate for controlling protein drug delivery. © 2015 Society of Chemical Industry     

A novel thermosensitive triblock copolymer from 100% renewably sourced poly(trimethylene ether) glycol

Bio‐based amphiphilic triblock copolymers with 100% renewably sourced poly(trimethylene ether) glycol (PO3G) as the hydrophobic blocks and statistical copolymer of 2‐(2‐methoxyethoxy)ethyl methacrylate (MEO₂MA) and oligo(ethylene glycol)methacrylate (OEGMA) [P(MEO₂MA‐stat‐OEGMA)] as the hydrophilic blocks are synthesized and characterized. It is found that the molar ratio of MEO₂MA/OEGMA among the resulting copolymers is approximately 70/30. The degree of polymerization (DP) of P(MEO₂MA‐stat‐OEGMA) block ranges from 16 to 90, and the DP of PO3G block is fixed at 35. The amphiphilic copolymers could form core‐shell micelles self‐assembly in aqueous solution at low concentrations, and the micelles are in spherical shape with sizes varying from 121 to 188 nm. With the increasing length of hydrophilic blocks, the critical micelle concentration increases from 2.15 to 13.8 mg L^?1, and the lower critical solution temperature improves from 32.5 to 38.4 °C. The in vitro doxorubicin (DOX) release study shows that all DOX‐loaded micelles have a higher release rate at 37 °C than that at 25 °C. Cytotoxicity test reveals that the blank micelles are nearly nontoxic. These results indicate that the block copolymer micelles containing 100% renewably sourced PO3G can serve as a potential drug delivery carrier. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46112.     

Synthesis of novel temperature responsive PEG-b-[PCL-g-P(MEO2MA-co-OEGMA)]-b-PEG (tBG) triblock-graft copolymers and preparation of tBG/graphene oxide composite hydrogels via click chemistry

Novel triblock-graft copolymers, poly ethylene glycol-b-[poly(ε-caprolactone)-g-poly(2-(2-methoxyethoxy) ethyl methacrylate-co-oligo (ethylene glycol) methacrylate)]-b-poly ethylene glycol (PEG-b-[PCL-g-P(MEO₂MA-co-OEGMA)]-b-PEG) (tBG), were synthesized via ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP). In the synthesis process, temperature responsive P(MEO₂MA-co-OEGMA) chains were grafted onto the PCL block of triblock copolymer PEG-b-PCL-b-PEG to improve its hydrophilicity. This method succeeded in increasing the solubility of PEG-b-PCL-b-PEG in water, and more importantly, endowing PEG-b-PCL-b-PEG with temperature sensitivity. By adjusting the feed ratio of 2-(2-methoxy ethoxy) ethyl methacrylate (MEO₂MA) and oligo (ethylene glycol) methacrylate (OEGMA) monomers, the lower critical solution temperature (LCST) of the tBG can be realized at about 37 °C. Taking advantage of the excellent mechanical property of graphene sheets, alkyne-functionalized graphene oxide (alkyne-GO) was introduced to cross-link tBGs and prepare tBG/GO composite hydrogel through click reaction between tBG-N₃ and alkyne-GO. Different from traditional cross-linkers, alkyne-GO acts as reinforcing filler in the composite hydrogel. Benefiting from superior properties of PCL, PEG, P(MEO₂MA-co-OEGMA) and GO, the as-prepared temperature responsive tBG/GO hydrogel exhibits excellent mechanical strength and toughness, demonstrating future potential applications in tissue engineering and biotechnology fields.     

pH‐sensitive swelling and release behaviors of anionic hydrogels for intelligent drug delivery system

The pH‐sensitive swelling and release behaviors of the anionic P(MAA‐co‐EGMA) hydrogels were investigated as a biological on–off switch for the design of an intelligent drug delivery system triggered by external pH changes. There was a drastic change of the equilibrium weight swelling ratio of P(MAA‐co‐EGMA) hydrogels at a pH of around 5, which is the pK_a of poly (methacrylic acid) (PMAA). At a pH below 5, the hydrogels were in a relatively collapsed state but at a pH higher than 5, the hydrogels swelled to a high degree. When the molecular weight of the pendent poly(ethylene glycol) (PEG) of the P(MAA‐co‐EGMA) increased, the swelling ratio decreased at a pH higher than 5. The pK_a values of the P(MAA‐co‐EGMA) hydrogels moved to a higher pH range as the pendent PEG molecular weight increased. When the feed concentration of the crosslinker of the hydrogel increased the swelling ratio of the P(MAA‐co‐EGMA) hydrogels decreased at a pH higher than 5. In release experiments using Rhodamine B (Rh‐B) as a model solute, the P(MAA‐co‐EGMA) hydrogels showed a pH‐sensitive release behavior. At low pH (pH 4.0) a small amount of Rh‐B was released while at high pH (pH 6.0) a relatively large amount of Rh‐B was released from the hydrogels. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Thermo‐ and pH‐sensitive hydrogels based on 2‐(2‐methoxyethoxy)ethyl methacrylate and methacrylic acid

Hydrogels based on commercially available 2‐(2‐methoxyethoxy)ethyl methacrylate (MEO₂MA), with methacrylic acid (MAA) as comonomer, are studied. The incorporation of an ionizable monomer, such as MAA, in a thermosensitive system leads to the formation of hydrogels able to respond to pH and temperature according to their monomeric composition. Thus, at low pH, the acid groups of MAA are protonated, and they do not contribute to increase the hydrophilic balance, and collapse of the hydrogels occurs around room temperature. For temperatures below that of collapse, the degree of swelling increases with increasing MEO₂MA content. In contrast, at neutral or basic pH, the ionization of the acid groups contributes to increase the hydrophilicity and the osmotic pressure, leading to polyelectrolyte behaviour. In this regime, the swelling capacity increases and the thermosensitivity decreases with increasing MAA content in the hydrogels. These properties make poly(MEO₂MA‐co‐MAA) hydrogels suitable candidates for use in oral controlled delivery of hydrophobic drugs. This possibility is explored using ibuprofen as a model drug, after a complete study of the swelling kinetics. Copyright © 2010 Society of Chemical Industry     

Mussel‐Inspired Hydrogel Composite with Multi‐Stimuli Responsive Behavior

A mussel‐inspired adhesive hydrogel with pH, temperature, and near‐infrared (NIR) light–responsive behavior is designed. The hydrogel system is formulated by combining chitosan modified with catechol motifs, thermo‐responsive poly(N‐isopropylacrylamide) terminated with catechols, and light‐absorbing polypyrrole nanoparticles (PpyNPs). The effects of catechol concentration, molar ratio of Fe³⁺ to catechol units, pH, and the incorporation of the PpyNPs on the mechanical property of the formed hydrogel are investigated. The responsive behaviors of the resulting hydrogel composite to pH, temperature, and NIR light are also demonstrated. The obtained hydrogel also shows promising adhesive property to glass and steel substrates. It is anticipated that the fabricated adhesive hydrogel with multi‐responsive behavior, especially NIR light response, can potentially be useful in a wide range of biomedical applications, such as remotely controlled release systems and removable sealant materials.     

Thermosensitive PMMA core/oligo(ethylene glycol)-based shell microgels as drug carriers in detoxification treatment

The core-shell structured polymer microgels were synthesized by coating the hydrophobic poly(methyl methacrylate) (PMMA) sphere cores with hydrophilic nonlinear poly(ethylene glycol)-based gel shell layer. The uniqueness of these core-shell microgels lies in the integration of the PMMA core microsphere with strong hydrophobicity and the novel oligo(ethylene glycol)-based gel layer with well-defined thermosensitivity for improving loading/release efficacy of two detoxification drugs (chlorpromazine and diltiazem). The hydrophilic shell is composed of hydrophilic copolymer of 2-(2-methoxyethoxy)ethyl methacrylate (MEO₂MA) with oligo(ethylene glycol) methyl ether methacrylates (MEO₅MA). It was found that the molar ratio of two shell monomers n(MEO₂MA)/n(MEO₅MA) of 1:6 was an ideal matching value for production of the P(MEO₂MA)/P(MEO₂MA-co-MEO₅MA) core-shell microgels with tunable volume phase transition temperature and excellent colloidal stability across the physiologically important temperature range. Moreover, chlorpromazine- and diltiazem-loaded microgels can show an obvious thermosensitive release and in vitro sustained-release characteristic up to 80 h.     

Syntheses,characterization, and antibacterial activity of chitosan grafted hydrogels and associated mica‐containing nanocomposite hydrogels

Chitosan (CS) grafted poly[(acrylic acid)‐co‐(2‐hydroxyethyl methacrylate)] (CS‐g‐poly(AA‐co‐HEMA)) at different molar ratios of AA and HEMA, and the associated nanocomposite hydrogels of CS‐g‐poly(AA‐co‐HEMA)/mica were synthesized by radical copolymerization. The grafting positions at the amino or hydroxyl groups in the CS were identified by Fourier transform infrared spectroscopy. CS‐g‐poly(AA‐co‐HEMA) hydrogels were intercalated in the mica and the amount of hydrogel insertion did not affect the spacing of the silicate layers in mica. The higher mica loadings produced a rougher surface of the nanocomposite hydrogel. The water absorbency of the CS‐g‐poly(AA‐co‐HEMA)/mica nanocomposite hydrogels decreased with increasing levels of mica loading to a lower level than those of the CS‐g‐poly(AA‐co‐HEMA) hydrogels. Both CS‐g‐poly(AA) and CS‐g‐poly(AA‐co‐HEMA)/mica nanocomposite hydrogels exhibited a higher antiproliferative activity against Staphylococcus aureus than did the neat CS hydrogel with CS‐g‐poly(AA) revealing a very pronounced minimum inhibition concentration (MIC) of 1.56 mg mL^?1. The extent of mica loading in the CS‐g‐poly(AA‐co‐HEMA) nanocomposite hydrogels did not affect the MIC (12.5 mg mL^?1). © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Amphiphilic ethyl cellulose brush polymers with mono and dual side chains: Facile synthesis,self-assembly,and tunable temperature-pH responsivities

Novel amphiphilic ethyl cellulose (EC) brush polymers with mono and dual side chains of poly(2-(2-methoxyethoxy)ethyl methacrylate)-co-oligo(ethylene glycol) methacrylate) (P(MEO₂MA-co-OEGMA)) and poly(2-(N,N-dimethylamino)ethyl methacrylate) (PDMAEMA) were synthesized by the combination of atom transfer radical polymerization (ATRP) and click chemistry. The molar ratio of P(MEO₂MA-co-OEGMA) and PDMAEMA was varied through changing the feed ratio of these polymers and the coupling efficiency of click chemistry is relatively high. The brush polymers can self-assemble into spherical micelles/aggregates. The micelles/aggregates show the tunable temperature-pH responsive properties. The cloud points and the pH-triggered phase transition were influenced by EC chains and the ratio of P(MEO₂MA-co-OEGMA) and PDMAEMA side chains. The brush polymers have the great potential applications as biomedical or intelligent materials.     

Poly(N‐isopropylacrylamide‐co‐sodium acrylate) hydrogels: Interactions with surfactants

Poly(N‐isopropylacrylamide‐co‐sodium acrylate) [poly(NIPAM‐co‐SA)] hydrogels were modified with three different kind of surfactants (cationic, anionic, and nonionic) to study the effect on the swelling properties. The structural variation of the surfactant‐modified hydrogels was investigated in detail. The interaction between the surfactants and the hydrogel varies and strictly depends on the surfactant type. The variation in thermal stability of the modified surfactant hydrogels was investigated and compared with unmodified hydrogel. Further, the hydrogel swelling/diffusion kinetic parameters were investigated and diffusion of water into hydrogel was found to be of the non‐Fickian transport mechanism. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3423–3430, 2007     

The studies on the stimuli‐response of poly (N,N‐dimethylamino ethyl methacrylate/acrylic acid‐co‐acrylamide) complex hydrogel under DC electric field

A polyelectrolyte complex hydrogel, poly (N,N‐dimethylaminoethyl methacrylate/acrylic acid‐co‐acrylamide) hydrogel designed as PDMEAA, was prepared by the free radical copolymerization in aqueous solutions. Without chemical crosslinker, PDMEAA hydrogel network was formed by electrostatic attraction of the proton‐transfer between acrylic acid and N,N‐dimethylamino ethyl methacrylate. Since the electrostatic attraction could be weakened by the application of electric field, PDMEAA hydrogel was decomposed under contacted electric field. Various factors such as gel composition, the species and concentration of electrolytes, voltage, and the experimental set‐ups, could effect the decomposing process of PDMEAA hydrogel. In CaCl₂ and MgCl₂ solutions, PDMEAA hydrogel had no change under electric field. And in high concentration of NaCl and Na₂SO₄ solutions, PDMEAA hydrogel has been eroded linearly with the increasing time applied electric field. In low concentration of NaCl and Na₂SO₄ solutions, however, a swelling process was found before the erosion. The stimuli‐responsive mechanism was investigated through scanning electron microscope (SEM) and gel permeation chromatography (GPC). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Poly(acrylamide‐co‐vinyl alcohol)—Superabsorbent materials reinforced by modified clay

A series of copolymeric superabsorbent materials comprising polyacrylamide (PAM), polyvinyl alcohol (PVA) reinforced with variable wt% of modified clay were prepared. The copolymer/clay composite was characterized by Fourier transformed infrared, transmission electron microscopy, and scanning electron microscopy. The water absorbencies of poly(acrylamide‐co‐vinyl alcohol)/clay composites were measured by calculating their percentage swelling ratio. The effects of copolymerization, type of clay, and clay content on the water absorbencies were studied. The swelling was measured in acidic, alkaline, and saline condition to ensure its versatility. The results indicated a remarkable increase in swelling ratio by incorporation of modified clay having higher hydrophilicity and optimum clay loading. The poly(acrylamide‐co‐vinyl alcohol)/clay composite hydrogel was found to have better re‐swelling ability and water retention capacity compared to the virgin copolymer. The substantial enhancement of swelling properties enables the superabsorbent poly(acrylamide‐co‐vinyl alcohol)/clay suitable for agricultural and horticultural application. POLYM. COMPOS., 34:1794–1800, 2013. © 2013 Society of Plastics Engineers     

Preparation and drug‐release behavior of minocycline‐loaded poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] films

In this work, biocompatible hydrogel matrices for wound‐dressing materials and controlled drug‐release systems were prepared from poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] [p(HEMA‐co‐PEG–MA] films via UV‐initiated photopolymerization. The characterization of the hydrogels was conducted with swelling experiments, Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis (differential scanning calorimetry), and contact‐angle studies. The water absorbency of the hydrogel films significantly changed with the change of the medium pH from 4.0 to 7.4. The thermal stability of the copolymer was lowered by an increase in the ratio of poly(ethylene glycol) (PEG) to methacrylate (MA) in the film structure. Contact‐angle measurements on the surface of the p(HEMA‐co‐PEG–MA) films demonstrated that the copolymer gave rise to a significant hydrophilic surface in comparison with the homopolymer of 2‐hydroxyethyl methacrylate (HEMA). The blood protein adsorption was significantly reduced on the surface of the copolymer hydrogels in comparison with the control homopolymer of HEMA. Model antibiotic (i.e., minocycline) release experiments were performed in physiological buffer saline solutions with a continuous flow release system. The amount of minocycline release was shown to be dependent on the HEMA/PEG–MA ratio. The hydrogels have good antifouling properties and therefore are suitable candidates for wound dressing and other tissue engineering applications. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Polyvinylphosphonic acid copolymer hydrogels prepared with amide and ester type crosslinkers

Crosslinked hydrogels made of poly(vinylphosphonic acid‐co‐N,N′‐methylenebisacrylamide) (P(VPA‐co‐MBAA)) and poly(vinylphosphonic acid‐co‐ethyleneglycol diacrylate) (P(VPA‐co‐EGDA)) were prepared by using precipitation polymerization in water medium. A comparison research was made between the resultant hydrogels containing different loads of vinylphosphonic acid segments when N,N′‐methylenebisacrylamide (MBAA) or ethyleneglycol diacrylate (EGDA) were used as comonomers. Morphological observations indicated that the resultant copolymer appeared as a fine powder at low VPA loadings and strongly aggregated at the high loadings; especially, a copolymer containing 63 mol % of VPA segments in P(VPA‐co‐MBAA) was observed to have a flake‐shaped appearance in its aggregated morphology. The resultant copolymer powders were characterized using FTIR spectroscopy and titrimetric analysis. Also, monomer reactivity ratios, r₁ and r₂, of VPA and MBAA or EGDA were estimated as 0.06 and 0.98 for VPA and MBAA and 0.05 and 1.82 for VPA and EGDA, respectively. This suggested that a large distribution of MBAA and EGDA was present in the resultant copolymer powders. Their crosslinked PVPA structure presented hydrogel properties having high water uptakes and an absorption mechanism independent from pH of bulk solution. The evidence showed that high VPA loadings could strongly interacted through hydrogen bonds between neighbor VPA segments even in the presence of water. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Design and fabrication of a triple-responsive chitosan-based hydrogel with excellent mechanical properties for controlled drug delivery

A pH-, temperature- and salinity responsive hydrogel with enhanced mechanical performance was developed based on semi interpenetrating network that was formed as a result of concurrent free radical polymerization of acrylic acid (AA), oligo(ethylene glycol) methacrylate (OEGMA) and 2-(2-methoxyethoxy) ethyl methacrylate (MEO₂MA) along with chitosan (CS) for controlled drug delivery. The mechanical behaviors and swelling properties of these hydrogels were systematically investigated, and the results indicated that they were strongly affected by the content of AA and MEO₂MA and exhibited strong pH-, temperature and salinity sensitivity. Bovine serum albumin (BSA) and 5-Fluorouracil (5-Fu) were used as the model drugs to evaluate the sustained release of the hydrogel. The result indicated that the amount of both drugs released was relatively low in acidic condition (pH 1.2) but high in neutral environment (pH 7.4), and the release rate of the drugs was slower at 37 °C than that at 25 °C. Cytotoxicity results suggested that the blank hydrogels had negligible toxicity to normal cells, whereas the 5-Fu-loaded hydrogels remained high in cytotoxicity for LO2 and HepG2 cancer cells. These results suggest that the synthesized hydrogels have the potential to be used as an effective pH/temperature sustainable site-specific oral drug delivery in intestine and colon.     

Swelling study of superabsorbent PAA‐co‐PAM/clay nanohydrogel

A series of superabsorbent composites were prepared from acrylic acid (AA), acrylamide (AM), and Cloisite® 30B by aqueous solution polymerization technique using ammonium peroxodisulfate (APS) as initiator. The interaction of the organically modified nanoclay with PAA‐co‐PAM copolymer was verified by FTIR, whereas the morphology of the composite was studied by Scanning Electron Microscopy (SEM). The water absorbency in deionized water and saline water of the synthesized nanohydrogels was measured by calculating their percentage swelling ratio. The effects of copolymerization, monomer ratio, clay content, and temperature on the water absorbency were studied. The results indicated a considerable increase in swelling ratio by proper monomer proportion and incorporation of optimum clay percentage into the copolymer matrix. It was found that the nanohydrogel acquired highest water absorbency with 2% clay loading. The reswelling ability and water retention capacity of the PAA‐co‐PAM hydrogel and PAA‐co‐PAM/clay nanohydrogel were also measured. The water absorbency was found to increase after each reswelling for which it may be useful as recyclable superabsorbent material. The results of water retention capacity of the nanohydrogel were also encouraging and find application in agriculture, especially in drought‐prone areas. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of a novel stimuli‐responsive magnetite nanohydrogel based on poly(ethylene glycol) and poly(N‐isopropylacrylamide) as drug carrier

A novel stimuli‐responsive magnetite nanohydrogel (MNHG), namely [poly(ethylene glycol)‐block‐poly(N‐isopropylacrylamide‐co‐maleic anhydride)₂]‐graft‐poly(ethylene glycol)/Fe₃O₄ [PEG‐b‐(PNIPAAm‐co‐PMA)₂]‐g‐PEG/Fe₃O₄, was successfully developed. For this purpose, NIPAAm and MA monomers were block copolymerized onto PEG‐based macroinitiator through atom transfer radical polymerization technique to produce PEG‐b‐(PNIPAAm‐co‐PMA)₂. The synthesized Y‐shaped terpolymer was crosslinked through the esterification of maleic anhydride units using PEG chains to afford a hydrogel. Afterward, magnetite nanoparticles were incorporated into the synthesized hydrogel through the physical interactions. The chemical structures of all synthesized samples were characterized using Fourier transform infrared and proton nuclear magnetic resonance spectroscopies. Morphology, thermal stability, size, and magnetic properties of the synthesized MNHG were investigated. In addition, the doxorubicin hydrochloride loading and encapsulation efficiencies as well as stimuli‐responsive drug release ability of the synthesized MNHG were also evaluated. The drug‐loaded MNHG at physiological condition exhibited negligible drug release values. In contrast, at acidic (pH 5.3) condition and a little bit higher temperature (41 °C) the developed MNHG showed higher drug release values, which qualified it for cancer chemotherapy due to especial physiology of cancerous tissue in comparison with the surrounding normal tissue. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46657.     

Multilayer‐coated NPK compound fertilizer hydrogel with controlled nutrient release and water absorbency

A novel trilayered controlled‐release nitrogen, phosphorous, and potassium (NPK) fertilizer hydrogel was prepared by dipping the NPK fertilizer granules sequentially in 7% w v^?1 poly(vinyl alcohol) (PVA) and 2% w v^?1 chitosan (CS) solutions and then cross‐linking the CS layer (cross‐CS) via glutaraldehyde vapor deposition. Different NPK fertilizer hydrogels were then synthesized by inverse suspension polymerization of the dried PVA/cross‐CS bilayer‐coated fertilizer granules in various molar ratios of acrylamide (AM) and acrylic acid (AA) monomers, and polymerization with varying molar ratios of ammonium persulfate, N,N,N′,N′‐tetramethylethylenediamine and N,N′‐methylenebisacrylamide (N‐MBA). The water dissolution time of the obtained PVA/cross‐CS/poly (AA‐co‐AM) trilayer‐coated NPK fertilizer hydrogel granules was prolonged, while the water absorbency increased with increasing AA contents, and decreased with increasing N‐MBA contents in the outer poly(AA‐co‐AM) coating. The optimal trilayer‐coated NPK fertilizer hydrogel obtained released 84 ± 18, 63 ± 12, and 36 ± 15% of the N, P, and K nutrients, respectively, after a 30‐day immersion in water. The release phenomena of the N, P, and K nutrients of the fertilizer hydrogel obeyed both the Korsmeyer‐Peppas and Ritger‐Peppas models with a pseudo‐Fickian diffusion mechanism. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41249.     

Synthesis and antitumor activity of poly(3,4‐dihydro‐2H‐pyran‐co‐maleic anhydride‐co‐vinyl acetate)

The radical‐initiated terpolymerization of 3,4‐dihydro‐2H‐pyran (DHP), maleic anhydride (MA), and vinyl acetate (VA), which were used as a donor–acceptor–donor system, was carried out in methyl ethyl ketone in the presence of 2,2′‐azobisisobutyronitrile as an initiator at 65°C in a nitrogen atmosphere. The synthesis and characterization of binary and ternary copolymers, some kinetic parameters of terpolymerization, the terpolymer‐composition/thermal‐behavior relationship, and the antitumor activity of the synthesized polymers were examined. The polymerization of the DHP–MA–VA monomer system predominantly proceeded by the alternating terpolymerization mechanism. The in vitro cytotoxicities of poly(3,4‐dihydro‐2H‐pyran‐alt‐maleic anhydride) [poly(DHP‐alt‐MA)] and poly(3,4‐dihydro‐2H‐pyran‐co‐maleic anhydride‐co‐vinyl acetate) [poly(DHP‐co‐MA‐co‐VA)] were evaluated with Raji cells (human Burkitt lymphoma cell line). The antitumor activity of the prepared anion‐active poly(DHP‐alt‐MA) and poly(DHP‐co‐MA‐co‐VA) polymers were studied with methyl–thiazol–tetrazolium testing, and the 50% cytotoxic dose was calculated. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2352–2359, 2005     

Bioinspired Stimuli-Responsive Hydrogel with Reversible Switching and Fluorescence Behavior Served as Light-Controlled Soft Actuators

Stimuli-responsive materials with multiple functions occupy a significant position in the research of bionic artificial intelligence materials. It is a challenge to integrate rapid shape deformation and color change synergistically by a simple method in the same system. Herein, an effective strategy to develop an anisotropic bilayer hydrogel actuator with unified complex deformation and color change is proposed via combining the near-infrared (NIR) light-responsive graphene oxide/poly(N-isopropylacrylamide) (GO-PNIPAM) active hydrogel layer and an UV light-responsive fluorescent poly(acrylic acid [4-(1,2,2-triphenylvinyl)] benzyl ester/N-isopropylacrylamide) passive hydrogel layer. The actuator can undergo light-controlled sapphire fluorescence color change and complex shape deformation simultaneously or separately under light irradiation. It can be remotely manipulated without the requirement for additional reagents, and the irradiation dosage can be accurately modulated through adjusting the irradiation parameters. This work provides new perspectives of intelligent systems with synergistic multiple functions, including smart robots, environmental sensors, and intelligent biomimetic devices.