底座连接口特征参数对显示器后壳注塑质量的影响分析

在Moldflow分析软件的基础上,对显示器后壳进行仿真研究,以翘曲变形量为质量指标,结合控制变量法进行单因素变动实验,保持注射工艺参数不变,研究显示器后壳底座连接口对制品翘曲变形的影响。对数据进行图表分析,结果表明显示器后壳尺寸定位68.58 cm(27英寸)时,底座连接口选用圆形,连接口位置距离底边26 mm,尺寸为直径21 mm的时候模具翘曲表现更好。     

Effect of the drafting force on the strength of the bottom of the spinneret

In spinning basalt fibres, the drafting force is in the same range as in spinning of glass fibres. The effect of the drafting force can not be considered in the calculation for the strength and rigidity of the bottom of the spinneret. __________ Translated from Khimicheskie Volokna, No. 5, pp. 47–50, September–October, 2007.