Electrooxidation of benzyl alcohol and benzaldehyde on a nickel oxy-hydroxide electrode in a filter-press type cell

The electrooxidation of benzyl alcohol and benzaldehyde in alkaline medium was carried out in a filter-press type cell on a nickel oxy-hydroxide electrode under different experimental conditions. An overpotential occurs in the presence of organic molecules in the solution shifting oxygen evolution towards higher potentials. The results obtained were conclusive that benzyl alcohol and benzaldehyde electrooxidation on NiOOH layers yielded benzoic acid as the main final reaction product. Chromatographic analysis of the bulk solution showed that the electrocatalytic oxidation of harmful molecules was carried out until the formation of acid compounds (benzoic acid) as an ultimate stage, suggesting that a Ni anode can be used successfully for waste remediation.     

碱性溶液中醇在Pd电极上失去电子数研究

用循环伏安法研究了碱性条件下甲醇、乙醇和异丙醇在Pd电极上氧化失去电子能力.甲醇和乙醇氧化是失去6个和4个电子.异丙醇容易失去2个电子氧化为丙酮,丙酮会进一步氧化,但氧化程度很低.乙醇和异丙醇在低于-0.4V范围内失去电子数比不上甲醇,但在-0.9到-0.4V的积分电量是甲醇的19.1和41.2倍.说明了乙醇和异丙醇在...     

乙醇电催化氧化反应动力学分析与研究进展

乙醇是一种很有吸引力的燃料电池电动汽车燃料。乙醇电催化氧化反应动力学研究对于直接醇类燃料电池和间接醇类燃料电池的阳极电催化剂开发有重要作用。本文依据反应机理和阳极电催化剂活性对乙醇的电催化氧化反应动力学进行了讨论，介绍了先进的微分电化学质谱技术在乙醇电催化反应动力学研究中的应用。     

Methanol and ethanol electrooxidation at 3D ordered silicon microchannel plates electrode modified with nickel–palladium nanoparticles in alkaline

The use of silicon microchannel plates (MCP) modified with nickel–palladium (Ni–Pd) nanoparticles by electroless plating was studied for the electrocatalytic oxidation of methanol and ethanol by cyclic voltammetry and chronoamperometry in alkaline media. The electrocatalyst was characterized by EDS, SEM and cyclic voltammetry, and the effective parameters on electrocatalytic oxidation of the alcohol, i.e. the concentration of KOH and alcohol, medium temperature and working potential limit in anodic direction were investigated. The modified electrode shows a superior electrooxidation performance with the operating temperature increasing and a strong current response to methanol and ethanol even during long-term oxidation of alcohol. All results show that the Ni–Pd/Si–MCP nanocomposite electrode is very attractive for integrated fuel cell applications.     

Electrocatalysis for the direct alcohol fuel cell

The basic principles of a direct alcohol fuel cell are first presented. Low temperature fuel cells (working between ambient temperature and 80–120 °C) need improved catalysts to reach performance levels sufficient for practical applications, particularly for the electric vehicle and for portable electronic devices. This is the case of proton exchange membrane fuel cells (PEMFC) and of direct alcohol fuel cells (DAFC) for which the kinetics of the electrochemical reactions involved (oxidation of reformate hydrogen containing some traces of carbon monoxide, oxidation of alcohols, reduction of oxygen) is rather slow. Basic understanding of electrocatalysis is then examined, showing how to increase the reaction rate both by the nature and the structure of the catalytic electrode and by the electrode potential. Finally the most used Pt-based electrocatalysts to activate the electrode reactions occurring in a direct ethanol fuel cell (DEFC) are discussed on the basis of electrochemical, spectro-electrochemical and fuel cell experiments.     

Optimization of platinum dispersion in Pt–PEM electrodes: application to the electrooxidation of ethanol

Nafion® can be used as a solid polymer electrolyte in a PEM fuel cell. Direct platinization of the membrane was realized by chemical reduction of a platinum compound. The platinization procedure was modified to enhance the roughness factor and thus to improve the electrocatalytic activity towards ethanol electrooxidation. The Pt–PEM electrodes were characterized by TEM, atomic absorption analysis, cyclic voltammetry and their polarization curves for ethanol electrooxidation.     

Oxide (CeO2, NiO, Co3O4 and Mn3O4)-promoted Pd/C electrocatalysts for alcohol electrooxidation in alkaline media

This study investigated Pt/C, Pd/C and oxide (CeO₂, NiO, Co₃O₄ and Mn₃O₄)-promoted Pd/C for electrooxidation reactions of methanol, ethanol, ethylene glycol and glycerol in alkaline media. The results show that Pd/C electrocatalysts alone have low activity and very poor stability for the alcohol electrooxidation. However, addition of oxides like CeO₂, NiO, Co₃O₄ and Mn₃O₄ significantly promotes catalytic activity and stability of the Pd/C electrocatalysts for the alcohol electrooxidation. The Pd-Co₃O₄ (2:1, w:w)/C shows the highest activity for the electrooxidation of methanol, EG and glycerol while the most active catalyst for the ethanol electrooxidation is Pd-NiO (6:1, w:w)/C. On the other hand, Pd-Mn₃O₄/C shows significantly better performance stability than other oxide-promoted Pd/C for the alcohol electrooxidation. The poor stability of the Pd-Co₃O₄/C electrocatalysts is most likely related to the limited solubility of cobalt oxides in alkaline solutions.     

Membrane Design for Direct Ethanol Fuel Cells: A Hybrid Proton‐Conducting Interpenetrating Polymer Network

A series of hybrid proton‐conducting membranes with an interpenetrating polymer network (IPN) structure was designed with the direct ethanol fuel cell (DEFC) application in mind. In these membranes, glutaraldehyde crosslinked poly(vinyl alcohol) (PVA) were interpenetrated with the copolymer of 2‐acrylamido‐2‐methyl‐propanesulphonic acid (AMPS) and 2‐hydroxyethyl methacrylate (HEMA) crosslinked by poly(ethylene glycol) dimethacrylate (PEGDMA). Silica from the in situ sol–gel hydrolysis of tetraethyl orthosilicate (TEOS) was uniformly dispersed in the polymer matrix. The membranes fabricated as such had ion exchange capacities of 0.84–1.43 meq g^–1 and proton conductivities of 0.02–0.11 S cm^–1. The membranes exhibited significantly lower fuel permeabilities than that of Nafion. In a manner totally unlike Nafion, fuel permeabilities were lower at higher fuel concentrations, and were lower in ethanol than methanol solutions. These behaviours are all relatable to the unique swelling characteristics of PVA (no swelling in ethanol, partial swelling in methanol and extensive swelling in water) and to the fuel blocking and swelling suppression properties of silica particles. The membranes are promising for DEFC applications since a high concentration of fuel may be used to reduce fuel crossover and to improve the anode kinetics for a resultant increase in both the energy and power densities of the fuel cell.     

Optimization of platinum dispersion in Pt–PEM electrodes: application to the electrooxidation of ethanol

Nafion® can be used as a solid polymer electrolyte in a PEM fuel cell. Direct platinization of the membrane was realized by chemical reduction of a platinum compound. The platinization procedure was modified to enhance the roughness factor and thus to improve the electrocatalytic activity towards ethanol electrooxidation. The Pt–PEM electrodes were characterized by TEM, atomic absorption analysis, cyclic voltammetry and their polarization curves for ethanol electrooxidation.     

Nano-structured PdxPt1−x/Ti anodes prepared by electrodeposition for alcohol electrooxidation

Nano-structured Pd_xPt_1−x (x = 0-1) composite catalysts supported on Ti substrate are successfully prepared by electrodeposition method, and the morphology and phase of the catalysts are analyzed by field emission scanning electron microscope (FE-SEM) and X-ray energy dispersion spectroscopy (EDS). The activity and stability of the Pd_xPt_1−x/Ti composite catalysts are assessed for the electrooxidation of alcohols (methanol, ethanol and 2-propanol) in alkaline medium using cyclic voltammetry and chronoamperometry techniques. The results show that the Pd and Pt form Pd_xPt_1−x nano-structured composite catalysts, uniformly distributed on the Ti substrate. The electrocatalytic activity and stability of the Pd_xPt_1−x nanocatalysts depend strongly on the atomic ratios of Pd and Pt. Among the synthesized catalysts, the Pd_0.8Pt_0.2/Ti displays the best catalytic activity and stability for the electrooxidation reaction of alcohols investigated in alkaline medium under conditions in this study, and shows the potential as electrocatalysts for direct alcohol fuel cells.     

Generation of carbon dioxide from glycerol: Evidences of massive production on polycrystalline platinum

In this work we investigate the glycerol electrooxidation reaction on polycrystalline platinum in acid media. Cyclic voltammetry shows the existence of multiple oxidation peaks, which are related with a complex electrooxidation mechanism. We follow the voltammetric response of Pt in the presence of glycerol by using FTIR in situ. Results show that during glycerol electrooxidation massive amounts of CO₂ are produced. The production of CO₂ begins at low potentials and depends on the previous formation of adsorbed CO. This pathway is accelerated at high potentials and seems to be the main responsible for the rising of the currents observed in the cyclic voltammogram for potentials up to 1.0 V. Moreover, there is a parallel pathway involving the production of a carboxylic acid (probably glyceric acid), but the relative magnitudes of CO₂ bands and acid bands makes clear that the production of CO₂ is the dominant feature of the spectra, suggesting that glycerol can be a suitable candidate for use in direct alcohol fuel cells.     

Enhancement of the electrooxidation of ethanol on a Pt–PEM electrode modified by tin. Part I: Half cell study

The direct platinisation of a solid polymer electrolyte (Nafion^® membrane) was realized by chemical reduction of a platinum salt. The Pt–PEM electrodes thus obtained were modified by tin to improve the electrocatalytic activity towards the electrooxidation of ethanol. The Pt–PEM and Pt–Sn–PEM electrodes were characterized by TEM, EDX and XRD analysis, cyclic voltammetry, and their polarisation curves for the electrooxidation of ethanol were determined under quasisteady state conditions.     

Au/C catalyst prepared by polyvinyl alcohol protection method for direct alcohol alkaline exchange membrane fuel cell application

An Au/C catalyst was prepared by means of the polyvinyl alcohol-protected Au sol method. Highly dispersed Au nanoparticles with an average particle size of around 3.7 nm were obtained as confirmed by transmission electron microscopy. The cyclic voltammogram of Au/C was similar to that of a bulk Au electrode, but a small shift of Au oxide reduction and oxidation potential peaks were observed. The electrooxidation of methanol, ethanol, ethylene glycol, and glycerol on the Au/C catalyst in an alkaline solution was analyzed. Using a cyclic voltammogram, the maximum current density toward alcohol electrooxidation was found to decrease in the order of glycerol > ethylene glycol > ethanol, while methanol was not oxidized. Compared with PtRu/C, the maximum current densities obtained from the Au/C catalyst for ethylene glycol and glycerol electrooxidation were increased by 1.6 and 3.3 times, respectively. The reaction heavily progressed through a C–C bond dissociation path. It was found that main product of glycerol electrooxidation was formic acid, which accounted for more than 60 % of the total product. Using chronoamperometry, the Au/C catalyst showed much better stability than that of PtRu/C for the reaction without C–C bond dissociation and better stability for the reaction with C–C bond dissociation.     

Ethanol production from raw starch by a recombinant yeast having saccharification and fermentation activities

In order to develop a method for converting raw starch into ethanol efficiently, direct fermentation of ozonized raw starch using a recombinant yeast was investigated. Ozonolysis was carried out as a pretreatment to convert raw starch into ethanol rapidly and efficiently, and then the effect of the ozone degradation conditions on the degree of polymerization and the amount of amylose in a raw starch was determined. Since the degree of polymerization was low and the amount of amylose was high, raw starch treated with an ozone concentration of 40 gm^?3 and an ozonation time of 30 min was the material chosen for alcohol fermentation. Though the recombinant yeast could not convert the untreated raw starch, it converted the soluble starch and the ozonized raw starch at a comparatively high yield into ethanol. About 56% of the ozonized raw starch decomposed, and the ethanol concentration obtained from the ozonized raw starch was markedly greater than that obtained from untreated raw starch. The dynamic behavior of cell growth, substrate degradation, and ethanol production was examined in a continuous culture under various dilution rates, and the optimal dilution rate, ie 0.15 h^?1, was determined for maximizing the ethanol productivity (amount of ethanol produced per unit time). © 2002 Society of Chemical Industry     

Morphofunctional State and Circadian Rhythms of the Liver under the Influence of Chronic Alcohol Intoxication and Constant Lighting

A study of the influence of chronic alcohol intoxication, constant illumination and their combined effects on the morphofunctional state of the rat liver and the circadian rhythms (CR) of the studied parameters of the organism was carried out. It was found that both alcohol and constant illumination caused significant changes in the structure of the liver, as well as in the circadian rhythmicity of micromorphometric parameters of hepatocytes, ALT, and total and direct bilirubin rhythms; however, the combined effects of ethanol and constant illumination had the most significant effect on the studied parameters of the organism. These two factors caused disturbances in the circadian rhythms of the micromorphometric parameters of hepatocytes, disruption of the circadian rhythms of total protein, albumin, AST, ALT, and direct and total bilirubin, as well as disturbances in the expression and rhythmicity of the studied clock genes against a background of the development of an inflammatory process in the liver.     

Enzymatic kinetic resolution of secondary alcohols by esterification with FA under vacuum

Kinetic resolution of some chiral secondary alcohols [2-octanol, 1-phenylethanol, and 1-(2-naphthyl)ethanol] with high enantioselectivity (E>300) was achieved by direct esterification with FFA catalyzed by immobilized Candida antarctica B lipase. The reaction equilibrium was shifted toward the synthetic side by the removal of the water formed under vacuum. Esterification of rac-2-octanol at an alcohol/FFA molar ratio of 2∶1 was used as a model reaction. The chain length of FFA and their structure influenced the reaction rate but did not have a measureable effect on E. The best acyl donor was decanoic acid: >47% conversion at 4 h with virtually perfect E. Temperature did not affect E in the range studied (15–45°C), but temperatures at the higher end afforded improved reaction rates. The reaction rates and E were compared for three different acyl donors. The initial reaction rate increased in the following order: ethyl laurate < lauric acid < vinyl acetate. E was high (E>300) for all acyl donors. Racemic 1-phenylethanol and 1-(2-naphthyl)ethanol were also resolved by direct esterification with decanoic acid in short times (3 and 4 h, respectively) with E>300 and excellent conversions. Preparative-scale kinetic resolution of 2-octanol was also performed.     

Physiochemical insight into the solution behavior of cationic gemini surfactant in water and ethanol–water systems

Surfactants in water and both alcohol-water mixed solutions are used extensively in a host of industrial applications. This work presents the solution behavior and micellar transition of a cationic gemini surfactant (GS): N,N′-dihexadecyl-N,N,N′,N′-tetramethyl-N,N′-ethanediyl-diammonium dibromide (16-2-16) in water and mixed water-ethanol media. Phase behavior for 16-2-16 in the ethanol–water system was investigated at ambient temperature. The rheological data obtained for these systems at varying alcohol concentrations showed that the system viscosity (η) decreased with as the ethanol concentration increased. Small-angle neutron scattering (SANS) was used to probe the structural details of the cationic micelles as a function of ethanol concentration and temperature. The scattering data inferred a structural transition from unilamellar vesicles (ULV) through rod-like micelles to ellipsoidal micelles occurs that is dependent on the solvent composition and temperature indicating the behavior of ethanol molecules as a cosolvent in the process of micelle breaking. The plausible physicochemical interactions in the 16-2-16-ethanol mixed system were further investigated using a computational simulation study employing density functional theory (DFT)/B3LYP (Gauss View 5.0.9) utilizing a 3-21G basis set.     

New composite membrane poly(vinyl alcohol)/graphene oxide for direct ethanol–proton exchange membrane fuel cell

This study investigated a simple synthesis of a crosslinked poly(vinyl alcohol)/ graphene oxide composite membrane with lower ethanol permeability membrane for passive direct ethanol–proton exchange membrane fuel cells (DE-PEMFCs). The chemical and physical structure, morphologies, ethanol uptake and permeability, ion exchange capacities, water uptake, and proton conductivities were determined and found that transport properties of the membrane were affected by the GO loading. The composite membrane with optimum GO content (15 wt %) exhibited the highest proton conductivity of 9.5 × 10⁻³ Scm⁻¹ at 30°C, 3.24 × 10⁻² Scm⁻¹ at 60°C, respectively and reduced ethanol permeability until 1.75 × 10⁻⁷ cm² s⁻¹. In the passive DE-PEMFC, the power density at 60°C were obtained as 5.84 mW cm⁻² higher than those by commercial Nafion 117 is 4.52 mW cm⁻². © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 46928.     

Effects of Beverages on Alcohol Metabolism: Potential Health Benefits and Harmful Impacts

Nonalcoholic beverages are usually consumed accompanying alcoholic drinks, and their effects on alcohol metabolism are unclear in vivo. In this study, the effects of 20 nonalcoholic beverages on alcohol metabolism and liver injury caused by alcohol were evaluated in mice. Kunming mice were orally fed with alcohol (52%, v/v) and beverages. The concentrations of ethanol and acetaldehyde in blood as well as the activities of alcohol dehydrogenase (ADH) and aldehyde dehydrogenase (ALDH) in liver were assessed to indicate alcohol metabolism. The levels of aspartate aminotransferase (AST) and alanine transaminase (ALT) in serum as well as the levels of malonaldehyde (MDA) and superoxide dismutase (SOD) in liver were measured to reflect the alcohol-induced liver injury. The results showed that the treatment of soda water, green tea and honey chrysanthemum tea could accelerate ethanol metabolism and prevent liver injuries caused by alcohol when companied with excessive alcohol drinking. They might be potential dietary supplements for the alleviation of harmful effects from excessive alcohol consumption. On the contrary, some beverages such as fresh orange juice and red bull are not advised to drink when companied with alcohol consumption due to their adverse effects on ethanol induced liver injury.     

Morphology-dependent activity of Pt nanocatalysts for ethanol oxidation in acidic media: Nanowires versus nanoparticles

The morphology of nanostructured Pt catalysts is known to affect significantly the kinetics of various reactions. Herein, we report on a pronounced morphology effect in the electrooxidation of ethanol and carbon monoxide (CO) on Pt nanowires and nanoparticles in an acidic solution. The high resolution transmission electron microscopy analysis showed the inherent morphology difference between these two nanostructured catalysts. Voltammetric and chronoamperometric studies of the ethanol electrooxidation revealed that these nanowires had a higher catalytic activity by a factor of two relative to these nanoparticles. The rate for CO monolayer oxidation exhibits similar morphology-dependent behavior with a markedly enhanced rate on the Pt nanowires. In situ infrared reflection–absorption spectroscopy measurements revealed a different trend for chemisorbed CO formation and CO₂-to-acetic acid reaction product ratios on these two nanostructures. The morphology-induced change in catalytic activity and selectivity in ethanol electrocatalysis is discussed in detail.