Structural elucidation and iron oxidation states in situ formed β‐Ca3(PO4)2/α‐Fe2O3 composites

A detailed structural analysis on the in situ synthesized β‐Ca₃(PO₄)₂/α‐Fe₂O₃ composites is demonstrated. Compositional ratios, the influence and occupancy of iron at the β‐Ca₃(PO₄)₂ lattice, oxidation state of iron in the composites are derived from analytical techniques involving XRD, FT‐IR, Raman, refinement of the powder X‐ray diffraction and X‐ray photoelectron spectroscopy. Iron exists in the Fe³⁺ state throughout the investigated systems and favors its occupancy at the Ca²⁺(5) site of β‐Ca₃(PO₄)₂ until critical limit, and thereafter crystallizes as α‐Fe₂O₃ at ambient conditions. Fe³⁺ occupancy at the β‐Ca₃(PO₄)₂ lattice yields a Ca₉Fe(PO₄)₇ structure that is isostructural with its counterpart. A strong rise in the soft ferromagnetic behavior of β‐Ca₃(PO₄)₂/α‐Fe₂O₃ composites is obvious that depends on the content of α‐Fe₂O₃ in the composites. Overall, the diverse level of iron inclusions at the calcium phosphate system with a Ca/P ratio of 1.5 yields a structurally stable β‐Ca₃(PO₄)₂/α‐Fe₂O₃ composites with assorted compositional ratios.     

Bio‐Based Hybrid Magnetic Latex Particles Containing Encapsulated γ ‐Fe2O3 by Miniemulsion Copolymerization of Soybean Oil‐Acrylated Methyl Ester and Styrene

This work reports the use of acrylated fatty acid methyl ester (AFAME) as a biomonomer for the synthesis of bio‐based hybrid magnetic particles poly(styrene‐co‐AFAME)/γ‐Fe₂O₃ produced by miniemulsion polymerization. Poly(styrene‐co‐AFAME)/γ‐Fe₂O₃ can be tailored for use in various fields by varying the content of AFAME. The strategy employed is to encapsulate superparamagnetic iron oxide nanoparticles (SPIONs) as γ‐Fe₂O₃ into a styrene/AFAME‐based copolymer matrix. Raman spectroscopy is employed to ensure the formation of the SPIONs (γ‐Fe₂O₃) obtained by a co‐precipitation technique followed by oxidation of Fe₃O₄. The functionalization of SPIONs with oleic acid (OA) is carried out to increase the SPIONs–monomer affinity. The presence of OA on the surface of γ‐Fe₂O₃ is certified by identification of main absorption bands by fourier‐transform infrared spectroscopy (FTIR). Thermal analysis (differential thermogravimetry/differential thermo analysis and differential scanning calorimetry) results of poly(styrene‐co‐AFAME)/γ‐Fe₂O₃ show an increase in AFAME content leading to a lower copolymer glass transition temperature (T _g). Dynamic light scattering (DLS) measurements result in poly(styrene‐co‐AFAME)/γ‐Fe₂O₃ particles with diameter in the range of 100–150 nm. It is also observed by transmission electron microscopy (TEM) and cryo‐TEM techniques that γ‐Fe₂O₃ particles are successfully encapsulated into the poly(styrene‐co‐AFAME) matrix.     

Cationic copolymers of α,β‐poly‐(N‐2‐hydroxyethyl)‐DL‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy): synthesis and characterization

In the present study the derivatization of two water‐soluble synthetic polymers, α,β‐poly(N‐2‐hydroxyethyl)‐DL ‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy), with glycidyltrimethylammonium chloride (GTA) is described. This reaction permits the introduction of positive charges in the macromolecular chains of PHEA and PAHy in order to make easier the electrostatic interaction with DNA. Different parameters affect the reaction of derivatization, such as GTA concentration and reaction time. PHEA reacts partially and slowly with GTA; on the contrary the reaction of PAHy with GTA is more rapid and extensive. The derivatization of PHEA and PAHy with GTA is a convenient method to introduce positive groups in their chains and it permits the preparation of interpolyelectrolyte complexes with DNA. © 2000 Society of Chemical Industry     

Synthesis and properties of magnetic sensitive shape memory Fe3O4/poly(ε‐caprolactone)‐polyurethane nanocomposites

Fe₃O₄/poly (ε‐caprolactone)‐polyurethane (PCLU) shape memory nanocomposites were prepared by an in situ polymerization method. The thermal properties, magnetic properties, and shape memory properties of the nanocomposites were investigated systematically. The results showed that the Fe₃O₄ nanoparticles were homogeneously dispersed in the PCLU matrix, which ensured good shape memory properties of nanocomposites in both hot water and an alternating magnetic field (f = 45 kHz, H = 29.7 kA m^?1/36.7 kA m^?1). The nanocomposites started to recover near 40°C, which is slightly higher than body temperature. Thus, they would not change their deformed shape during the implanting process into the human body. Considering potential clinical applications, 45°C was chosen as shape recovery temperature which is slightly higher than 37°C, and the nanocomposites had high shape recovery rate at this temperature. With increasing content of Fe₃O₄ nanoparticles, the shape memory properties of the nanocomposites in an alternating magnetic field increased and the best recovery rate reached 97%, which proves that this kind of nanocomposites might be used as potential magnetic sensitive shape memory materials for biomedical applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2013     

Preparation of γ‐Fe2O3 Catalysts and their deNOx Performance: Effects of Precipitation Conditions

Magnetic γ‐Fe₂O₃ catalysts were prepared by microwave‐assisted coprecipitation utilizing the direct‐titrate and back‐titrate precipitation technique with different precipitants, namely, (NH₄)₂CO₃, NaOH, Na₂CO₃, and NH₄OH, which were evaluated in the selective catalytic reduction of NO_x with NH₃. The optimum γ‐Fe₂O₃ catalyst preparation method was direct titration with NH₄OH as the precipitant, which exhibits high deNO_x efficiency. This direct titration was effective to maintain the proper crystallization degree of γ‐Fe₂O₃, improve the pore structure, and suppress the formation of α‐Fe₂O₃ phase, being advantageous to get tiny and uniform discrete γ‐Fe₂O₃ particles with high activity in selective catalytic reduction. NH₄⁺‐based precipitants in direct titration leads to an increase of the surface O/Fe atom ratio, and more lattice oxygen sites are exposed to the crystal surface.     

Synthesis,characterization, and corrosion inhibition study of polyaniline‐α‐Fe2O3 nanocomposite

Polyaniline (PANI)‐α‐Fe₂O₃ nanocomposites (NCs) have been synthesized by chemical oxidative in situ polymerization of aniline in presence of α‐Fe₂O₃ nanoparticles at 5°C using (NH₄)₂S₂O₈ as an oxidant in an aqueous solution of sodium dodecylbenzene sulphonic acid (SDBS), as surfactant and dopant under N₂ atmosphere. The room temperature conductivity of NCs decreases and coercive force (H_c) increases with an increase addition of α‐Fe₂O₃ in PANI matrix. The result of FTIR and TGA shows that the interaction between α‐Fe₂O₃ particles and PANI matrix could improve the thermal stability of NCs. NCs demonstrate the superparamagnetic behavior. The performance of PANI and PANI‐α‐Fe₂O₃ NCs as protective coating, against corrosion of 316LN stainless steel in 3.5% NaCl was assessed by potentiodynamic polarization technique. The study shows a good corrosion inhibition effect of both the coatings. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of grafting β‐cyclodextrin with chitosan

Two new adsorbents [β‐cyclodextrin–chitosan (β‐CD–CTS) and β‐cyclodextrin‐6–chitosan (β‐CD‐6‐CTS)] were synthesized by the reaction of β‐cyclodextrin (β‐CD) with epoxy‐activated chitosan (CTS) and the sulfonation of the C‐6 hydroxyl group of β‐cyclodextrin with CTS, respectively. Their structures were confirmed by IR spectral analysis and X‐ray diffraction analysis, and their apparent amount of grafting was determined by ultraviolet spectroscopy. The adsorption properties of β‐CD‐CTS and β‐CD‐6‐CTS for p‐dihydroxybenzene were studied. The experimental results showed that the two new adsorbents exerted adsorption on the carefully chosen target. The highest saturated capacity of p‐dihydroxybenzene of β‐CD‐CTS and β‐CD‐6‐CTS were 51.68 and 46.41 mg/g, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 860–864, 2004     

Ruthenium(II)‐Catalyzed Protocol for Preparation of Diverse α,β‐ and β,β‐Dihaloenones from Diazodicarbonyls

Efficient one‐step syntheses of α,β‐ and β,β‐dihaloenones were achieved by ruthenium(II)‐catalyzed reactions between cyclic or acyclic diazodicarbonyl compounds and oxalyl chloride or oxalyl bromide in moderate to good yields. This methodology offers several significant advantages, which include ease of handling, mild reaction conditions, one‐step reaction, and the use of an effective and non‐toxic catalyst. The synthesized compounds were further transformed into highly functionalized novel molecules bearing aromatic rings on the enone moiety using the Suzuki reaction.

     

Michael Reaction of Nitroalkanes with β‐Nitroacrylates under a Solid Promoter: Advanced Regio‐ and Diastereoselective Synthesis of Nitro‐Functionalized α,β‐Unsaturated Esters and 1,3‐Butadiene‐2‐carboxylates

A new class of nitro‐functionalized α,β‐unsaturated esters has been prepared by a regio‐ and diastereoselective Michael addition of nitroalkanes to β‐nitroacrylates, performed at room temperature, under carbonate on polymer as promoter, and in the presence of ethyl acetate as eco‐friendly solvent. Moreover, by the modular choice of the reaction conditions the method allows the synthesis of 1,3‐butadiene‐2‐carboxylates.     

Synthesis and thermal properties of polystyrene/montmorillonite nanocomposites by γ‐ray radiation polymerization

Polystyrene/montmorillonite nanocomposites were prepared by γ‐ray radiation polymerization. X‐ray diffraction and high‐resolution transmission electron microscopy confirmed that polystyrene (PS) could be easily inserted between the sheets of montmorillonite (MMT) to form intercalated nanocomposites. In these PS/MMT nanocomposites, the distance between the sheets of MMT was barely influenced by varying the content of the MMT. Thermal stabilities of the samples were studied by thermal gravimetric analysis and differential scanning calorimetry. The glass‐transition temperature of PS/MMT nanocomposites was obviously higher than that of the pure PS. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1692–1696, 2003     

Statistical Optimization of the Biodiesel Production Process Using a Magnetic Core‐Mesoporous Shell KOH/Fe3O4@γ‐Al2O3 Nanocatalyst

A magnetic core‐mesoporous shell KOH/Fe₃O₄@γ‐Al₂O₃ nanocatalyst was synthesized using the Fe₃O₄@γ‐Al₂O₃ core‐shell structure as support and KOH as active component. The prepared samples were characterized by X‐ray diffraction (XRD), field‐emission scanning electron microscopy (FE‐SEM), energy‐dispersive X‐ray spectroscopy (EDS), Fourier transform infrared (FTIR), Brunauer‐Emmett‐Teller (BET), and vibrating sample magnetometry (VSM) techniques. Transesterification of canola oil to methyl esters (biodiesel) in the presence of the magnetic core‐mesoporous shell KOH/Fe₃O₄@γ‐Al₂O₃ nanocatalyst was investigated. Response surface methodology (RSM) based on the Box‐Behnken design (BBD) was employed to optimize the influence of important operating variables on the yield of biodiesel. A biodiesel yield of 97.4 % was achieved under optimum reaction conditions. There was an excellent agreement between experimental and predicted results.     

Structural characterization of α‐ and β‐nucleated isotactic polypropylene

Modification of isotactic polypropylene (iPP) with two nucleation agents, namely 1,3:24‐bis(3,4‐dimethylobenzylideno) sorbitol (DMDBS) (α‐nucleator) and N, N′‐dicyclohexylo‐2,6‐naphthaleno dicarboxy amide (NJ) (β‐nucleator), leads to significant changes of the structure, morphology and properties. Both nucleating agents cause an increase in the crystallization temperature. The efficiency determined in a self‐nucleation test is 73.4 % for DMDBS and 55.9 % for NJ. The modification with NJ induces the creation of the hexagonal β‐form of iPP. The addition of DMDBS lowers the haze of iPP while the presence of NJ increases the haze. Copyright © 2004 Society of Chemical Industry     

Highly Enantioselective Phase‐Transfer Catalytic α‐Alkylation of α‐tert‐Butoxycarbonyllactams: Construction of β‐Quaternary Chiral Pyrrolidine and Piperidine Systems

A new enantioselective α‐alkylation of α‐tert‐butoxycarbonyllactams for the construction of β‐quaternary chiral pyrrolidine and piperidine core systems is reported. α‐Alkylations of N‐methyl‐α‐tert‐butoxycarbonylbutyrolactam and N‐diphenylmethyl‐α‐tert‐butoxycarbonylvalerolactam under phase‐transfer catalytic conditions (solid potassium hydroxide, toluene, −40 °C) in the presence of (S,S)‐3,4,5‐trifluorophenyl‐3,3′,5,5′‐tetrahydro‐2,6‐bis(3,4,5‐trifluorophenyl)‐4,4′‐spirobi[4H‐dinaphth[2,1‐c:1′,2′‐e]azepinium] bromide [(S,S)‐NAS Br] (5 mol%) afforded the corresponding α‐alkyl‐α‐tert‐butoxycarbonyllactams in very high chemical (up to 99%) and optical yields (up to 98% ee). Our new catalytic systems provide attractive synthetic methods for pyrrolidine‐ and piperidine‐based alkaloids and chiral intermediates with β‐quaternary carbon centers.     

Multi‐Enzymatic Synthesis of Optically Pure β‐Hydroxy α‐Amino Acids

A novel enzymatic production system of optically pure β‐hydroxy α‐amino acids was developed. Two enzymes were used for the system: an N‐succinyl L ‐amino acid β‐hydroxylase (SadA) belonging to the iron(II)/α‐ketoglutarate‐dependent dioxygenase superfamily and an N‐succinyl L ‐amino acid desuccinylase (LasA). The genes encoding the two enzymes are part of a gene set responsible for the biosynthesis of peptidyl compounds found in the Burkholderia ambifaria AMMD genome. SadA stereoselectively hydroxylated several N‐succinyl aliphatic L ‐amino acids and produced N‐succinyl β‐hydroxy L ‐amino acids, such as N‐succinyl‐L ‐β‐hydroxyvaline, N‐succinyl‐L ‐threonine, (2S,3R)‐N‐succinyl‐L ‐β‐hydroxyisoleucine, and N‐succinyl‐L ‐threo‐β‐hydroxyleucine. LasA catalyzed the desuccinylation of various N‐succinyl‐L ‐amino acids. Surprisingly, LasA is the first amide bond‐forming enzyme belonging to the amidohydrolase superfamily, and has succinylation activity towards the amino group of L ‐leucine. By combining SadA and LasA in a preparative scale production using N‐succinyl‐L ‐leucine as substrate, 2.3 mmol of L ‐threo‐β‐hydroxyleucine were successfully produced with 93% conversion and over 99% of diastereomeric excess. Consequently, the new production system described in this study has advantages in optical purity and reaction efficiency for application in the mass production of several β‐hydroxy α‐amino acids.

     

Organocatalytic Enantioselective Aziridination of α‐Substituted α,β‐Unsaturated Aldehydes: Asymmetric Synthesis of Terminal Aziridines

The first example of a highly enantioselective organocatalytic aziridination of α‐substituted α,β‐unsaturated aldehydes is presented. The reaction is catalyzed by simple chiral amines and gives access to highly functional terminal azirdines containing an α‐tertiary amine stereocenter in high yields and enantiomeric ratios (95.5:4.5–98:2).     

Flame Spray Synthesis of Nanoscale La0.6Sr0.4Co0.2Fe0.8O3–δ and Ba0.5Sr0.5Co0.8Fe0.2O3–δ as Cathode Materials for Intermediate Temperature Solid Oxide Fuel Cells

Electrochemical performance and degradation was analysed by conductivity measurements as well as thermogravimetric analysis (TGA) under different atmospheres. CO₂ was identified as a critical parameter in terms of carbonate formation from Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3–δ and causes a strong increase in the material resistivity, whereas La_0.6Sr_0.4Co_0.2Fe_0.8O_3–δ is unaffected. The oxygen exchange kinetic of both compositions is affected by CO₂ containing atmospheres.