Synthesis and characterization of alternate copolymers constructed by 1,3‐bis(diphenylsilyl)‐2,2,4,4‐tetraphenylcyclodisilazane units with oligo‐dimethylsiloxane segments

1,3‐Dichloro‐1,1,3,3‐tetraphenyldisilazane (DCTPS) with 71.6% yield was synthesized by the reaction of hexaphenylcyclotrisilazane (HPCT) with Ph₂SiCl₂ catalyzed by dibutyltin dilaurate. A ring‐closure reaction of DCTPS was carried out with BuLi in xylene–hexane mixture solvent; 1,3‐bis(chlorodiphenylsilyl)‐2,2,4,4‐tetraphenyl‐cyclodisilazane (BcPTPC) with 73.2% yield was obtained. Hydrolysis of BcPTPC in ether–triethylamine solvent resulted in 71.9% yield of 1,3‐bis(diphenylhydroxysilyl)‐2,2,4,4‐tetraphenylcyclodisilazane (B_HPTPC). By condensation polymerization of B_HPTPC with α,ω‐bis(diethylamino)‐oligo‐dimethylsiloxane, a kind of alternate copolymer constructed by 1,3‐bis(diphenylsilyl)‐2,2,4,4‐tetraphenylcyclodisilazane units with oligo‐dimethylsiloxane segments [P(BPTPC‐alt‐ODMS)] was synthesized. BcPTPC, B_HPTPC as well as P(BPTPC‐alt‐ODMS) were characterized by ²⁹Si‐NMR spectra, FT‐IR spectra, and elemental analysis. DGA study shows that P(BPTPC‐alt‐ODMS)s are thermally stable. The thermal decomposition onsets of P(BPTPC‐alt‐ODMS)s are all above 520°C. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1484–1490, 2005     

Synthesis and properties of block and graft waterborne polyurethane modified with α,ω‐bis(3‐(1‐methoxy‐2‐hydroxypropoxy)propyl)polydimethylsiloxane and α‐N,N‐dihydroxyethylaminopropyl‐ω‐butylpolydimethylsiloxane

In this study, α,ω‐bis(3‐(1‐methoxy‐2‐hydroxypropoxy)propyl)polydimethylsiloxane and α‐N,N‐dihydroxyethylaminopropyl‐ω‐butylpolydimethylsiloxane were used to prepare block and graft waterborne polyureathane–polysiloxane copolymer dispersions. α,ω‐bis(3‐(1‐methoxy‐2‐hydroxypropoxy)propyl)polydimethylsiloxane was synthesized by hydrosilylation, methoxylation and equilibrium reactions; α‐N,N‐dihydroxyethylaminopropyl‐ω‐butylpolydimethylsiloxane was synthesized via hydroxyl protection, alkylation, anionic ring‐opening polymerization, hydrosilylation, and deprotection. Block and graft waterborne polyurethane–polysiloxane copolymer dispersions were prepared by the reaction of poly(propylene glycol) (PPG), toluene diisocyanate (TDI), 2,2‐dimethylol propionic acid (DMPA), 1,4‐butanediol (BDO), α,ω‐bis(3‐(1‐methoxy‐2‐hydroxypropoxy)propyl)polydimethylsiloxane, and α‐N,N‐dihydroxy‐ethylaminopropyl‐ω‐butylpolydimethylsiloxane. The water absorption of block and graft waterborne polyurethane–polysiloxane copolymer films decreased from 163.9 to 40.2% and 17.3%, respectively, when percent of polysiloxane (w/w) increased from 0 to 5%, and the tensile strength of the block waterborne polyurethane–polysiloxane copolymer films decreased while the tensile strength of graft waterborne polyurethane–polysiloxane copolymer films increased with increase of percent of polysiloxane. For graft waterborne polyurethane–polysiloxane films, the tensile strength would decrease when percent of polysiloxane was more than 3%. POLYM. ENG. SCI., 54:805–811, 2014. © 2013 Society of Plastics Engineers     

Temperature influence on the behavior of polysulfone‐b‐poly(alkylene oxide)‐b‐poly(dimethylsiloxane) triblock copolymers in a selective solvent

Triblock copolymers containing polysulfone, poly(alkylene oxide), and poly(dimethylsiloxane) segments were obtained by addition of preformed α,ω‐bis(hydrogensilyl) poly(dimethylsiloxane) oligomers to alyl end‐capped poly(alkylene oxide)‐b‐polysulfone. Viscometric and UV absorption measurements were carried out in dilute 1,2‐dichlorethane solutions, in the temperature range of 20–75°C. The specific interactions exhibited by the block copolymers in a selective solvent are influenced by the copolymer composition and temperature. The results point to a conformational transition phenomenon, located around 55°C, which is attributed to the transition from a segregated to a pseudo‐Gaussian conformation through a compressed‐segregated conformation. POLYM. ENG. SCI., 57:114–118, 2017. © 2016 Society of Plastics Engineers     

Synthesis,characterization, and applications of novel additives of polysiloxane containing N,N′‐bis(diphenylsilyl)tetraphenylcyclodisilazane

Three N,N′‐bis(diphenylsilyl)tetraphenylcyclodisilazane‐based derivatives, N,N′‐bis(3,3,3‐trimethyl‐1,1‐diphenyl‐disiloxanyl)tetraphenylcyclodisilazane, N‐(3,3‐dimethyl‐1,1‐diphenyl‐3‐vinyl‐disiloxanyl)‐N′‐(3,3,3‐trimethyl‐1,1‐diphenyl‐disiloxanyl)‐tetraphenylcyclodisilazane, and N,N′‐bis‐(3,3‐dimethyl‐1,1‐diphenyl‐3‐vinyl‐disiloxanyl) tetraphenylcyclodisilazane, were synthesized. These compounds were synthesized in an easy and effective route. X‐ray single‐crystal diffraction analyses showed that the four‐member rings were planar rings, and the structures are different with the different substitution. The compound N,N′‐bis‐(3,3‐dimethyl‐1,1‐diphenyl‐3‐vinyl‐disiloxanyl) tetraphenylcyclodisilazane was added to the silicone rubber as additive to enhance the thermal stability greatly increased the thermal stability of the silicone rubber, without altering the glass transition temperature. The weight loss at 350°C in nitrogen atmosphere for 24 h reduced from 55.8% for 0 wt % to 9.8% for 10 wt % addition N,N′‐Bis‐(3,3‐dimethyl‐1,1‐diphenyl‐3‐vinyl‐disiloxanyl)tetraphenylcyclodisilazane. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis of polysiloxane–polyester copolymer by lipase‐catalyzed polycondensation

Polysiloxane–polyester copolymers have been synthesized for the first time by direct polycondensation of a series of diacids (butanedioic, hexanedioic, and octanedioic acid) and α,ω‐bis(3‐hydroxypropyl) polydimethylsiloxanes catalyzed with Novozyme‐435 in high yields (>90%) without the cleavage of Si? O bonds. The effects of monomer chain length, reaction temperature, and water removal method on the number–average molecular weight (M_n) of the resulted copolymers were investigated. Thermogravimetric and differential scanning calorimetry analyses indicated that the produced copolymer was more thermally stable than poly(1,8‐octyladipate) and the T_g was lowered to ?111°C. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and properties of polysiloxane containing N,N′-bis(diphenylsilyl)tetraphenylcyclodisilazane

A new kind of polysiloxane containing N,N′-bis(diphenylsilyl)tetraphenylcyclodisilazane was prepared by the anionic polymerization with a “seed solution” as initiator. The synthesis of monomers N,N′-bis(hydroxydiphenylsilyl)tetraphenylcyclodisilazane (BHPTPC), N,N′-bis(chlorodiphenylsilyl)tetraphenylcyclodisilazane (BCPTPC), and 1,3-dichloro-1,1,3,3-tetraphenyldisilazane (DCTPS) are all reported in this study. The synthesized polysiloxane containing N,N′-bis(diphenylsilyl)tetraphenylcyclodisilazane was characterized by ¹H–NMR, ²⁹Si–NMR, gel permeation chromatography (GPC), and intrinsic viscosity. The thermal stability of the polysiloxane was studied by isothermal gravimetric analysis (IGA). The results demonstrated that the synthesized polysiloxane containing N,N′-bis(diphenylsilyl)tetraphenylcyclodisilazane had excellent thermal stability. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 929–933, 2001     

Comb‐type methylsiloxane copolymers with diorganosilylene fragments as a lateral group

The catalytic dehydrocondensation reaction of α,ω‐bis(trimethylsiloxy)methylhydridesiloxane and of α,ω‐bis(trimethylsiloxy)methylhydridesiloxane‐dimethylsiloxane with α‐hydroxy‐ω‐trimethylsiloxydiorganosilylenes, in the presence of anhydrous caustic potassium, at 1:35 and 1:33 ratio of initial compounds has been investigated and polyorganosiloxanes with rigid polydiorganosilylenes fragment in the side chain, completely soluble in organic solvents, have been obtained. The catalytic dehydrocondensation reaction order, activation energies, and rate constants have been determined. The synthesized copolymers were characterized by thermogravimetric, gel permeation chromatographic, differential scanning calorimetric, and wide‐angle X‐ray analyses. It was shown that during modification of α,ω‐bis(trimethylsiloxy)methylhydridesiloxane‐dimethylsiloxane with α‐hydroxy‐ω‐trimethylsiloxydiorganosilylenes in synthesized block‐copolymers, microdomain structure (phase incompatibility) was observed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2161–2167, 2007     

Preparation of polyimides derived from biphenyltetracarboxylic dianhydrides and aromatic diamines bearing alkylene spacers

Four series of aromatic polyimides (PIs V–VIII) composed of biphenyltetracarboxylic dianhydrides (BPDAs) and aromatic diamines bearing alkylene spacers were prepared by two methods. Most polymers could be readily prepared in a one‐step method for the combination of a‐BPDA with α,ω‐bis(3‐aminophenoxy)alkanes, a‐BPDA with α,ω‐bis(4‐aminophenoxy)alkanes, and s‐BPDA with α,ω‐bis(3‐aminophenoxy)alkanes. However, the polymerization of s‐BPDA with α,ω‐bis(4‐aminophenoxy)alkanes gave powders. On the other hand, all four monomer combinations afforded the desired polyamic acid solution in a two‐step method. These polymer solutions could be cast into tough and flexible films, which were characterized by their inherent viscosity, differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical spectrometry measurements. The glass transition temperatures (T_gs) of the polymers were in the range of 110–240°C, but they were not clearly defined for PIs VIII and VI. The 5% weight loss temperatures were around 450°C for all prepared PIs. For PI VIII an “odd–even” behavior of the tensile properties of the films was detected, corresponding to the reported behavior of the melting temperatures. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2404–2413, 1999     

Synthesis and characterization of poly(ester ether siloxane)s

A series of novel thermoplastic elastomers based on ABA‐type triblock prepolymers, poly[(propylene oxide)–(dimethylsiloxane)–(propylene oxide)] (PPO‐PDMS‐PPO), as the soft segments, and poly(butylene terephthalate) (PBT), as the hard segments, was synthesized by catalyzed two‐step melt transesterification of dimethyl terephthalate (DMT) with 1,4‐butanediol (BD) and α,ω‐dihydroxy‐(PPO‐PDMS‐PPO) (M?_n = 2930 g mol^?1). Several copolymers with a content of hard PBT segments between 40 and 60 mass% and a constant length of the soft PPO‐PDMS‐PPO segments were prepared. The siloxane‐containing triblock prepolymer with hydrophilic terminal PPO blocks was used to improve the compatibility between the polar comonomers, i.e. DMT and BD, and the non‐polar PDMS segments. The structure and composition of the copolymers were examined using ¹H NMR spectroscopy, while the effectiveness of the incorporation of α,ω‐dihydroxy‐(PPO‐PDMS‐PPO) prepolymer into the copolyester chains was controlled by chloroform extraction. The effect of the structure and composition of the copolymers on the transition temperatures (T_m and T_g) and the thermal and thermo‐oxidative degradation stability, as well as on the degree of crystallinity, and some rheological properties, were studied. Copyright © 2006 Society of Chemical Industry     

Synthesis and properties of TLCPs with 2,6‐naphthalene‐based mesogen,polymethylene spacer,and nonlinear 4,4′‐thiodiphenyl links

A series of new thermotropic main‐chain liquid crystalline copolyesters were prepared by polycondensation of 2,6‐naphthalenedicarbonyl chloride, 4,4′‐thiodiphenol, and α,ω‐alkanediols (n = 4–10) in diphenyl ether at 200°C. Thermal transition behaviors of these copolyesters were investigated by differential scanning calorimetry. Moreover, their thermal stabilities and mesomorphic textures were studied by thermogravimetric analysis and polarizing optical microscopy, respectively. Corresponding model compounds with terminal mesogenic units and central polymethylene spacers were also synthesized for comparison. Both copolymers and model compounds exhibit odd–even dependency of melting temperatures, transition enthalpy (ΔH_m), and entropy (ΔS_m) on the number of methylene units in the spacer. However, the odd–even effects in model compounds are much more distinctive. Nematic mesophases are the only texture observed in melts, except the model compounds with longer methylene units (n = 8, 10), in which smectic mesophases can be observed. The T_m values of the copolyesters (TDP/HD = 1/1) are between 233 and 259°C, depending on spacer length. The initial decomposition temperatures of the copolyesters are above 419°C under N₂ atmosphere. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1536–1546, 2002     

Synthesis and characterization of PBMA‐b‐PDMS‐b‐PBMA copolymers by atom transfer radical polymerization

Poly(butyl methylacrylate)–b–poly(dimethylsiloxane)–b–poly(butyl methylacrylate) (PBMA–b–PDMS–b–PBMA) triblock copolymers were synthesized by atom transfer radical polymerization (ATRP). The reaction of α,ω‐dichloride PDMS with 2′‐hydroxyethyl‐2‐bromo‐2‐methylpropanoate gave suitable macroinitiators for the ATRP of BMA. The latter procedure was carried out at 110°C in a phenyl ether solution with CuCl and 4,4′‐di (5‐nonyl)‐2,2′‐bipyridine (dNbpy) as the catalyzing system. The polymerization was controllable, with the increase of the monomer conversion, there was a nearly linear increase of molecular weight and a decrease of polydispersity in the process of the polymerization, and the rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with IR and ¹H‐NMR and differential scanning calorimetry. The effects of macroinitiator concentration, catalyst concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP were reported. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 532–538, 2004     

The effect of segment length on some properties of thermoplastic poly(ester–siloxane)s

A series of novel thermoplastic elastomers, based on poly(dimethylsiloxane) (PDMS) as the soft segment and poly(butylene terephthalate) (PBT) as the hard segment, were synthesized by catalyzed two‐step, melt transesterification reactions of dimethyl terephthalate and methyl esters of carboxypropyl‐terminated poly(dimethylsiloxane)s (M?_n = 550–2170 g mol^?1) with 1,4‐butanediol. The lengths of both the hard and soft segments were varied while the weight ratio of the hard to soft segments in the reaction mixture was maintained constant (57/43). The molecular structure, composition and molecular weights of the poly(ester–siloxane)s were examined by ¹H NMR spectroscopy. The effectiveness of the incorporation of the methyl‐ester‐terminated poly(dimethylsiloxane)s into the copolymer chains was verified by chloroform extraction. The effect of the segment length on the transition temperatures (T_m and T_g) and the thermal and thermo‐oxidative degradation stability, as well as the degree of crystallinity and hardness properties of the synthesized TPESs, were studied. Copyright © 2003 Society of Chemical Industry     

α‐Bis and α,ω‐tetrakis(4‐dimethylaminophenyl) functionalized polymers by atom transfer radical polymerization using 1,1‐bis[(4‐dimethylamino)phenyl]ethylene as tertiary diamine initiator precursor and functionalizing agent

The quantitative syntheses of α‐bis and α,ω‐tetrakis tertiary diamine functionalized polymers by atom transfer radical polymerization (ATRP) methods are described. A tertiary diamine functionalized 1,1‐diphenylethylene derivative, 1,1‐bis[(4‐dimethylamino)phenyl]ethylene (1), was evaluated as a unimolecular tertiary diamine functionalized initiator precursor as well as a functionalizing agent in ATRP reactions. The ATRP of styrene, initiated by a new tertiary diamine functionalized initiator adduct (2), affords the corresponding α‐bis(4‐dimethylaminophenyl) functionalized polystyrene (3). The tertiary diamine functionalized initiator adduct (2) was prepared in situ by the reaction of (1‐bromoethyl)benzene with 1,1‐bis[(4‐dimethylamino)phenyl]ethylene (1) in the presence of a copper (I) bromide/2,2′‐bipyridyl catalyst system. The ATRP of styrene proceeded via a controlled free radical polymerization process to afford quantitative yields of the corresponding α‐bis(4‐dimethylaminophenyl) functionalized polystyrene derivative (3) with predictable number‐average molecular weight (M_n) and narrow molecular weight distribution (M_w/M_n) in a high initiator efficiency reaction. The polymerization process was monitored by gas chromatography analysis. Quantitative yields of α,ω‐tetrakis(4‐dimethylaminophenyl) functionalized polystyrene (4) were obtained by a new post ATRP chain end modification reaction of α‐bis(4‐dimethylaminophenyl) functionalized polystyrene (3) with excess 1,1‐bis[(4‐dimethylamino)phenyl]ethylene (1). The tertiary diamine functionalized initiator precursor 1,1‐bis[(4‐dimethylamino)phenyl]ethylene (1) and the different tertiary amine functionalized polymers were characterized by chromatography, spectroscopy and non‐aqueous titration measurements. Copyright © 2012 Society of Chemical Industry     

Thermoplastic hydrogel based on pentablock copolymer consisting of poly(γ‐benzyl L‐glutamate) and poloxamer

A thermoplastic hydrogel based on a pentablock copolymer composed of poly(γ‐benzyl L ‐glutamate) (PBLG) and poloxamer was synthesized by polymerization of BLG N‐carboxyanhydride, which was initiated by diamine‐terminated groups located at the ends of poly(ethylene oxide) (PEO) chains of the poloxamer, to attain a new pH‐ and temperature‐sensitive hydrogel for drug delivery systems. Circular dichroism measurements in solution and IR measurements in the solid state revealed that the polypeptide block existed in the α‐helical conformation, as in the PBLG homopolymer. The intensity of the wide‐angle X‐ray diffraction patterns of the polymers depended on the poloxamer content in the copolymer and showed basically similar reflections to the PBLG homopolymer. The melting temperature (T_m) of the poloxamer in the copolymer was reduced with an increase of the PBLG block in comparison with the T_m of the poloxamer, which is indicative of a thermoplastic property. The water contents of the copolymers were dependent on the poloxamer content in the copolymers, for example, those for the GPG‐2 (48.7 mol % poloxamer) and GPG‐1 (57.5 mol % poloxamer) copolymers were 31 and 41 wt %, respectively, indicating characteristics of a polymeric hydrogel. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2649–2656, 2003     

Phosphorus‐containing poly(ester‐imide)–polydimethylsiloxane copolymers

New phosphorus‐containing poly(ester‐imide)‐polydimethylsiloxane copolymers were prepared by solution polycondensation of 1,4‐[2‐(6‐oxido‐6H‐dibenz < c,e > < 1, 2 > oxaphosphorin‐6‐yl)]naphthalene‐bis(trimellitate) dianhydride with a mixture of an aromatic diamine (1,3‐bis(4‐aminophenoxy)benzene) and α,ω‐bis(3‐aminopropyl)oligodimethylsiloxane of controlled molecular weight, in various ratios. Poly(amic acid) intermediates were converted quantitatively to the corresponding polyimide structures using a solution imidization procedure. The polymers are easily soluble in polar organic solvents, such as N‐methyl‐2‐pyrrolidone and N,N‐dimethylformamide, as well as in less polar solvents such as tetrahydrofuran. They show good thermal stability, the decomposition temperature being above 370 °C. The glass transition temperatures are in the range 165–216 °C. Solutions of the polymers in N‐methyl‐2‐pyrrolidone exhibit photoluminescence in the blue region. Copyright © 2010 Society of Chemical Industry     

Preparation and properties of organosoluble,colorless, and high‐pretilt‐angle polyimides based on an alicyclic dianhydride and long‐main‐chain alkyl‐group‐containing diamines

Alicyclic polyimides (PIs) were prepared from 3‐carboxylmethyl‐cyclopentane‐1,2,4‐tricarboxylic acid dianhydride and α,ω‐di(4‐aminophenoxyl)alkanes. These PIs possessed good solubility in aprotic, strongly polar solvents such as N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethyl formamide, and m‐cresol. They possessed high transparency in visible wavelengths and were almost colorless. The pretilt angle of a liquid‐crystal display with these PIs as the alignment layer increased linearly as the length of the alkyloxy groups increased; it was close to 5° for the PI samples PI‐10 and PI‐12. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2814–2820, 2001     

Variations of the glass‐transition temperature in the imidization of poly(styrene‐co‐maleic anhydride)

The imidization of poly(styrene‐co‐maleic anhydride) (SMA) was conducted, and the glass‐transition temperatures (T_g's) of the resulting products were measured with differential scanning calorimetry. The contributions from functional groups of maleic anhydride, N‐phenylmaleamic acid, and N‐phenylmaleimide to T_g were examined. T_g increased in the order of SMA < styrene–N‐phenyl maleimide copolymer < styrene–N‐phenyl maleamic acid copolymer and followed the Fox equation. T_g of the imidized products of SMA could be controlled by the conversions of both ring‐opening and ring‐closing reactions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2418–2422, 2007     

Bioengineering functional copolymers: V. Synthesis,LCST, and thermal behavior of poly(N‐isopropyl acrylamide‐co‐p‐vinylphenylboronic acid)

New boron‐containing stimuli‐responsive (pH‐ and temperature‐sensitive) copolymers were synthesized and characterized. Structure and composition of copolymers were determined by FTIR and ¹H‐NMR spectroscopy, and elemental analysis and titration (N and B contents for NIPA and VPBA unit, respectively). By DSC and XRD measurements, it is established that the synthesized copolymers have a semicrystalline structure due to formation of intra‐ and/or intermolecular H‐bonded supramolecular architecture. The copolymer composition–structure–property relationship indicates semicrystalline structure of copolymers with different compositions, degrees of crystallinity, and thermal and stimuli‐responsive behaviors depends on the content of boron‐containing monomer linkage. Results of DSC, DTA, and TGA analyses indicated that copolymers have T_g and T_m and high thermal stability. These water‐soluble and temperature‐ and pH‐sensitive amphiphilic copolymers can be used as polymeric carries for delivery of biological entities for diverse biomedical use, including boron neutron capture therapy. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 573–582, 2005     

Redox initiation system of ceric salt and α,ω‐dihydroxy poly(dimethylsiloxane)s for vinyl polymerization

The redox system of ceric salt and α,ω‐dihydroxy poly(dimethylsiloxane) is used to polymerize vinyl monomers such as acrylonitrile and styrene to produce block copolymers. The concentration and type of α,ω‐dihydroxy poly(dimethylsiloxane) affects the yield and the molecular weight of the copolymers. The copolymers have about 20°C lower glass‐transition temperatures and much higher contact angle values than of the corresponding homopolymer of vinyl monomers, although the weight percent of α,ω‐dihydroxy poly(dimethylsiloxane) of the copolymers is in the range of 1–2%. © 2006 Wiley Periodicals Inc. J Appl Polym Sci 102: 2112–2116, 2006     

Preparation and characterization of the copolymer containing N‐pyridyl bi(methacryl)imide unit

The copolymer of methacrylic acid anhydride and N‐2‐pyridyl bi(methacryl)imide was prepared based on the reaction of polymethacrylic acid with 2‐pyridylamine. The molecular structure was characterized by ¹H‐NMR, FTIR, UV–Vis, and circular dichroism techniques. The physical properties of polymethacrylic acid change significantly after an introduction of 6 mol % N‐2‐pyridyl bi(methacryl)imide unit. In particular, the thermal degradation of the polymer was systematically studied in flowing nitrogen and air from room temperature to 800°C by thermogravimetry at a constant heating rate of 10°C/min. In both atmospheres, a four‐stage degradation process of the copolymer of methacrylic acid anhydride and N‐2‐pyridyl bi(methacryl)imide was revealed. The initial thermal degradation temperature T_d, and the first, second, and third temperatures at the maximum weight‐loss rate T_dm1, T_dm2, and T_dm3 all decrease with decreasing sample size or changing testing atmosphere from nitrogen to air, but the fourth temperature at the maximum weight‐loss rate T_dm4 increases. The maximum weight‐loss rate, char yield at elevated temperature, four‐stage decomposition process, and three kinetic parameters of the thermal degradation were discussed in detail. It is suggested that the copolymer of methacrylic acid anhydride and N‐2‐pyridyl bi(methacryl)imide exhibits low thermal stability and multistage degradation characteristics. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1673–1678, 2002