Silver Salt of 4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine – Characterization of this Primary Explosive

A new primary explosive, the silver salt of 4,6‐diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine (AgDANT), was synthesized and characterized. AgDANT was prepared with a 97 % yield and characterized by IR spectroscopy, single‐crystal X‐ray diffraction, and DTA. The crystal density of AgDANT is 2.530 g cm⁻³ and the molecule consists of a centro‐symmetric dimer with a high degree of planarity. The intramolecular Ag Ag distance is relatively low (331 pm) and can be considered as a strong argentophilic interaction. AgDANT is non‐hygroscopic and its solubility in water (1.27 mg in 100 mL at 23 °C) is on a similar level of solubility to that of silver azide. The sensitivity of AgDANT to impact is slightly higher than that for MF, sensitivity to friction is the same as for LA, and sensitivity to electric discharge is between that for LS and MF. Initiation efficiency of AgDANT was tested in electric detonators and compared to dextrinated lead azide (initiation efficiency of AgDANT is 40 mg for PETN secondary charge). The thermal resistance of detonators with AgDANT is satisfactory; all detonators were fully functional after exposure at 65 °C (30 d) and 85 °C (2 d).     

Synthesis,Crystal Structure,and Thermal Behaviors of 3‐Nitro‐1,5‐bis(4,4′‐dimethylazide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP)

The energetic material, 3‐nitro‐1,5‐bis(4,4′‐dimethyl azide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP), was firstly synthesized by means of Click Chemistry using 1,5‐diazido‐3‐nitrazapentane as main material. The structure of NDTAP was confirmed by IR, ¹H NMR, and ¹³C NMR spectroscopy; mass spectrometry, and elemental analysis. The crystal structure of NDTAP was determined by X‐ray diffraction. It belongs to monoclinic system, space group C2/c with crystal parameters a=1.7285(8) nm, b=0.6061(3) nm, c=1.6712(8) nm, β=104.846(8)°, V=1.6924(13) nm³, Z=8, μ=0.109 mm⁻¹, F(000)=752, and D_c=1.422 g cm⁻³. The thermal behavior and non‐isothermal decomposition kinetics of NDTAP were studied with DSC and TG‐DTG methods. The self‐accelerating decomposition temperature and critical temperature of thermal explosion are 195.5 and 208.2 °C, respectively. NDTAP presents good thermal stability and is insensitive.     

Study on the Azido‐Tetrazolo Tautomerizations of 3,6‐Bis(azido)‐1,2,4,5‐tetrazine

The azido‐tetrazolo tautomerizations of 3,6‐diazido‐1,2,4,5‐tetrazine (DIAT) in different solvents were investigated with HPLC and ¹³C NMR spectroscopy. 6‐Amino‐tetrazolo[1,5‐b]‐1,2,4,5‐tetrazine (ATTZ) was irreversibly formed as the final product by azido‐cyclization following N₂ elimination from one of the azido substituents at room temperature in DMSO. The structure of ATTZ was characterized by X‐ray crystallography; differential scanning calorimetry (DSC), mass spectrometry, as well as IR and ¹H NMR and ¹³C NMR spectroscopy. The crystal density was found to be 1.272 g cm⁻³. DSC result suggested that ATTZ with the melting point of 84 °C strongly decomposes with explosion at 198 °C, which can be regarded as a primary explosive.     

A Novel Insensitive High Explosive 3,4‐Bis (Aminofurazano) Furoxan

A novel insensitive high explosive 3,4‐bis (aminofurazano) furoxan (BAFF) was prepared using 3‐amino‐4‐acylchloroximinofurazan (ACOF) as a precursor. The molecular and crystal structures of BAFF were characterized by IR, MS, ¹H NMR, ¹³C NMR, elemental analysis, and single crystal X‐ray diffraction. The single crystal structure of BAFF recrystallized from water is monoclinic, space group P 21/c, and ρ_c=1.745 g cm⁻³, and that recrystallized from ethanol is triclinic, space group P 1, and ρ_c=1.737 g cm⁻³. BAFF has multiple crystal forms. The calculated detonation velocity by BKW code is 8100 m s⁻¹ (ρ=1.795 g cm⁻³, theoretical density calculated by quantum chemistry) and the experimental value is 7177 m s⁻¹ (ρ=1.530 g cm⁻³, charge density). The tested values of impact, friction, and electrostatic spark sensitivity show that BAFF is insensitive.     

4,5‐Bis(5‐tetrazolyl)‐1,2,3‐triazole: Synthesis and Performance

4,5‐Bis(5‐tetrazolyl)‐1,2,3‐triazole (BTT) was synthesized by a new method. Its structure was characterized by IR and ¹³C NMR spectroscopy and elemental analysis (EA). The thermal stability of BTT was investigated by TG‐DSC technique. The kinetic parameters including activation energy and pro‐exponential factor were calculated by Kissinger equation. The combustion heat, detonation products, hygroscopicity, impact, and friction sensitivity were also measured. The formation heat, detonation pressure, and detonation velocity of BTT were calculated. BTT has high detonation pressure and detonation velocity (P=35.36 GPa, D=8.971 km s⁻¹). BTT has potential application prospect as environmentally friendly gas generant, insensitive explosive and solid propellant.     

Synthesis,Crystal Structure,and Thermal Behavior of 3‐(4‐Aminofurazan‐3‐yl)‐4‐(4‐nitrofurazan‐3‐yl)furazan (ANTF)

The energetic material 3‐(4‐aminofurazan‐3‐yl)‐4‐(4‐nitrofurazan‐3‐yl)furazan (ANTF) with low melting‐point was synthesized by means of an improved oxidation reaction from 3,4‐bis(4′‐aminofurazano‐3′‐yl)furazan. The structure of ANTF was confirmed by ¹³C NMR spectroscopy, mass spectrometry, and the crystal structure was determined by X‐ray diffraction. ANTF crystallized in monoclinic system P2₁/c, with a crystal density of 1.785 g cm⁻³ and crystal parameters a=6.6226(9) Å, b=26.294(2) Å, c=6.5394(8) Å, β=119.545(17)°, V=0.9907(2) nm³, Z=4, μ=0.157 mm⁻¹, F(000)=536. The thermal stability and non‐isothermal kinetics of ANTF were studied by differential scanning calorimetry (DSC) with heating rates of 2.5, 5, 10, and 20 K min⁻¹. The apparent activation energy (E_a) of ANTF calculated by Kissinger's equation and Ozawa's equation were 115.9 kJ mol⁻¹ and 112.6 kJ mol⁻¹, respectively, with the pre‐exponential factor lnA=21.7 s⁻¹. ANTF is a potential candidate for the melt‐cast explosive with good thermal stability and detonation performance.     

Synthesis and Characterization of 1,4‐Dimethyl‐5‐Aminotetrazolium 5‐Nitrotetrazolate

1,4‐Dimethyl‐5‐aminotetrazolium 5‐nitrotetrazolate ( 2 ) was synthesized in high yield from 1,4‐dimethyl‐5‐aminotetrazolium iodide ( 1 ) and silver 5‐nitrotetrazolate. Both new compounds ( 1, 2 ) were characterized using vibrational (IR and Raman) and multinuclear NMR spectroscopy (¹H, ¹³C, ¹⁴N, ¹⁵N), elemental analysis and single crystal X‐ray diffraction. 1,4‐Dimethyl‐5‐aminotetrazolium 5‐nitrotetrazolate ( 2 ) represents the first example of an energetic material which contains both a tetrazole based cation and anion. Compound 2 is hydrolytically stable with a high melting point of 190 °C (decomposition). The impact sensitivity of compound 2 is very low (30 J), it is not sensitive towards friction (>360 N). The molecular structure of 1,4‐dimethyl‐5‐aminotetrazolium iodide ( 1 ) in the crystalline state was determined by X‐ray crystallography: orthorhombic, F_ddd, a=1.3718(1) nm, b=1.4486(1) nm, c=1.6281(1) nm, V=3.2354(5) nm³, Z=16, ρ=1.979 g cm⁻¹, R₁=0.0169 (F>4σ(F)), wR₂ (all data)=0.0352.     

Synthesis and Characterization of 3,4,5‐Triamino‐1,2,4‐Triazolium 5‐Nitrotetrazolate

3,4,5‐Triamino‐1,2,4‐triazolium 5‐nitrotetrazolate ( 2 ) was synthesized in high yield from 3,4,5‐triamino‐1,2,4‐triazole (guanazine) ( 1 ) and ammonium 5‐nitrotetrazolate. The new compound 2 was characterized by vibrational (IR and Raman) and multinuclear NMR spectroscopy (¹H, ¹³C, ¹⁵N), elemental analysis and single crystal X‐ray diffraction (triclinic, P(‐1), a=0.7194(5), b=0.8215(5), c=0.8668(5) nm, α=75.307(5), β=70.054(5), γ=68.104(5)°, V=0.4421(5) nm³, Z=2, ϱ=1.722 g cm⁻¹, R₁=0.0519 [F>4σ(F)], wR₂(all data)=0.1154). The ¹⁵N NMR spectrum and X‐ray crystal structure (triclinic, P‐1, a=0.5578(5), b=0.6166(5), c=0.7395(5) nm, α=114.485(5)°, β=90.810(5)°, γ=97.846(5)°, V=0.2286(3) nm³, Z=2, ϱ=1.658 g cm⁻¹, R₁=0.0460 [F>4σ(F)], wR₂(all data)=0.1153) of 1 were also determined.     

Semiconductive poly[N1,N4‐bis(thiophen‐2‐ylmethylene)benzene‐1,4‐diamine]‐nickel oxide nanocomposite based ethanol sensor

This study aims to use the conductivity of a synthetic polymer as the sensing probe for ethanol. In order to enhance the sensitivity of the sensor, a composite of the polymer and nickel oxide (NiO) nanoparticles was formed as it improved the conductivity. This composite exhibited 100 times more conductivity than the neat polymer. The semiconductive nanocomposite of poly [N¹,N⁴‐bis(thiophen‐2‐ylmethylene)benzene‐1,4‐diamine]‐nickel oxide (PBTMBDA‐NiO) was prepared by in situ chemical oxidative polymerization. The monomer was N¹,N⁴‐bis(thiophen‐2‐ylmethylene)benzene‐1,4‐diamine (BTMBDA). The monomer (BTMBDA), polymer (PBTMBDA), and NiO nanoparticles used in this study were synthesized. The monomer was prepared by refluxing together 2‐thiophene carboxaldehyde, benzene‐1,4‐diamine, and few drops of glacial acetic acid in ethanol medium for 3 h. The polymer, PBTMBDA, was formed by the chemical oxidative polymerization of BTMBDA in chloroform by FeCl₃. NiO nanoparticles were prepared by slow addition of aqueous ammonia to anhydrous nickel chloride at room temperature (28 ± 2 °C), and at a pH of 8 under constant stirring condition. The composite was formed by in situ chemical oxidative polymerization of BTMBDA in chloroform by FeCl₃ in the presence of the dispersed NiO nanoparticles. The molecular structure of BTMBDA and PBTMBDA were confirmed by nuclear magnetic resonance (NMR) (¹H, ¹³C, and Dept‐90°), Fourier transform infrared spectroscopy, and ultraviolet (UV)–visible spectroscopy. The PBTMBDA and PBTMBDA‐NiO nanocomposite were characterized by X‐ray diffraction, thermogravimetric analysis, field emission scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy analysis. The results of characterization studies indicate the strong interaction between PBTMBDA and NiO in the nanocomposite. The broadness of ¹H NMR peaks in PBTMBDA was due to the increased number of monomer units. The disappearance of the peak of α‐hydrogens on thiophene confirms the polymerization involving the fifth position of thiophene part of BTMBDA. The Fourier transform infrared spectroscopy spectra revealed that position of the characteristic peaks of the functional groups in the monomer shifted toward lower wave numbers in PBTMBDA and PBTMBDA‐NiO nanocomposite. This shifting confirms the presence of extended conjugation along the polymer backbone. Electronic spectra of these compounds showed three absorption bands corresponding to π→π*, n→π* and n→π* transitions of π electron of carbon, lone pair electrons of S, and lone pair electrons of N (imine) groups, respectively. From the Tafel plot, the exchange current density evaluated for the BTMBDA and PBTMBDA are 0.2815 × 10⁻⁸ and 1.1508 × 10⁻⁸ A cm⁻², respectively. PBTMBDA is evaluated to be a better electrode material than the BTMBDA. The X‐ray diffraction plots showed that the characteristic peak of NiO in PBTMBDA‐NiO nanocomposite suggested successful incorporation of NiO in PBTMBDA‐NiO nanocomposite. The thermogravimetric analysis revealed the improved thermal stability of the composite. Field emission scanning electron microscopy and energy‐dispersive X‐ray spectroscopy analysis confirmed the presence of the NiO in the composite. Incorporation of nickel oxide nanoparticles improved the electrical conductivity and stability of PBTMBDA. The conductivity of the polymer was found to be of the order of 10⁻⁵ S cm⁻¹ while that of the composite was of the order of 10⁻³ S cm⁻¹. The nanocomposite was found to be thermally more stable than PBTMBDA and exhibited better direct‐current electrical conductivity and isothermal stability than the PBTMBDA as revealed by the four‐probe study. The electrical conductivity as inferred from the four‐probe method was used as the parameter to study the isothermal stability of the composite. The PBTMBDA‐NiO nanocomposite based vapor sensor was constructed for the sensing of ethanol vapor in commercial ethanol and real samples (alcoholic drinks: Beer, Wine, Brandy, Vodka, Whisky, and Rum) It was observed that on exposure to ethanol vapor at ambient temperature, the electrical resistivity of the nanocomposite increased indicating suppression of charge carriers. The interaction of ethanol vapor with PBTMBDA in PBTMBDA‐NiO nanocomposite was confirmed by IR spectral technique. The change in the structure of the PBTMBDA on interaction with ethanol was highlighted by the changes in the infrared spectrum. The conductivity of the polymer was explained using the structure‐activity relationship of the monomer evaluated using Gaussian 09 software. This study also analyzed the total electron density with electrostatic potential of the monomer and its correlation with chemical reactivity in order to explain the ethanol vapor sensing‐property of the nanocomposite. A new method of ethanol vapor sensing by a conducting polymer composite is hereby reported. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45918.     

Computed Thermodynamic and Explosive Properties of 1‐Azido‐2‐nitro‐2‐azapropane (ANAP)

Some thermodynamic and explosive properties of the recently reported 1‐azido‐2‐nitro‐2‐azapropane (ANAP) have been determined in a combined computational ab initio (MP2/aug‐cc‐pVDZ) and EXPLO5 (Becker–Kistiakowsky–Wilson's equation of state, BKW EOS) study. The enthalpy of formation of ANAP in the liquid phase was calculated to be Δ_fH°, ANAP(l)=+297.1 kJ mol⁻¹. The heat of detonation (Q_v), the detonation pressure (P), and the detonation velocity of ANAP were calculated to be Q_v=−6088 kJ kg⁻¹, P=23.8 GPa, D=8033 m s⁻¹. A mixture of ANAP and tetranitromethane (TNM) was investigated in an attempt to tailor the impact sensitivity of ANAP, but results obtained indicate that the mixture is almost as sensitive as pure ANAP. On the other hand, ANAP and TNM were found to be chemically compatible (¹H, ¹³C, ¹⁴N NMR; DSC) and a 1 : 1 mixture (by weight) of both components was calculated to have superior explosive properties than either of the individual components: Q_v=−6848 kJ kg⁻¹, P=27.0 GPa, D=8284 m s⁻¹.     

A DFT Study on the Structures and Energies of Isomers of 4‐Amino‐1,3‐dinitro‐1,2,4‐triazol‐5‐one‐2‐oxide: New High Energy Density Compounds

Isomers of 4‐amino‐1,3‐dinitrotriazol‐5‐one‐2‐oxide (ADNTONO) are of interest in the contest of insensitive explosives and were found to have true local energy minima at the DFT‐B3LYP/aug‐cc‐pVDZ level. The optimized structures, vibrational frequencies and thermodynamic values for triazol‐5‐one N‐oxides were obtained in their ground state. Kamlet‐Jacob equations were used to evaluate the performance properties. The detonation properties of ADNTONO (D=10.15 to 10.46 km s⁻¹, P=50.86 to 54.25 GPa) are higher compared with those of 1,1‐diamino‐2,2‐dinitroethylene (D=8.87 km s⁻¹, P=32.75 GPa), 5‐nitro‐1,2,4‐triazol‐3‐one (D=8.56 km s⁻¹, P=31.12 GPa), 1,2,4,5‐tetrazine‐3,6‐diamine‐1,4‐dioxide (D=8.78 km s⁻¹, P=31.0 GPa), 1‐amino‐3,4,5‐trinitropyrazole (D=9.31 km s⁻¹, P=40.13 GPa), 4,4′‐dinitro‐3,3′‐bifurazan (D=8.80 km s⁻¹, P=35.60 GPa) and 3,4‐bis(3‐nitrofurazan‐4‐yl)furoxan (D=9.25 km s⁻¹, P=39.54 GPa). The  NH₂ group(s) appears to be particularly promising area for investigation since it may lead to two desirable consequences of higher stability (insensitivity), higher density, and thus detonation velocity and pressure.     

Crystal Structure and Improved Synthesis of 1‐(2H‐Tetrazol‐5‐yl)guanidium Nitrate

Energetic derivatives of tetrazoles are one of the key areas of research focus in pursuit of novel high energy materials, useful as propellants and explosives. Herein, the crystal structure and an improved synthetic procedure of 1‐(2H‐tetrazol‐5‐yl)guanidine ( 1 ) and its nitrate salt ( 2 ) are reported. The compounds were structurally characterized by spectroscopic (FT‐IR, ¹H NMR, ¹³C NMR) and elemental analysis. The molecular structure of tetrazolyl guanidium nitrate ( 2 ) was solved using low temperature single‐crystal X‐ray diffraction. 2 crystallized as its hemihydrate in the orthorhombic space group Fdd2, with a crystal density of 1.69 g cm⁻³. Thermal behavior and decomposition of the molecules were studied with differential scanning calorimetry (DSC). Molar enthalpy of formation (Δ_fH^m) of compound 2 was back calculated from heat of combustion (Δ_cH⁰) value obtained experimentally using bomb calorimetric measurements. Lattice enthalpy of 1‐(2H‐tetrazol‐5‐yl)guanidium nitrate was directly calculated from measured crystal density using Jenkins equation. Preliminary ballistic parameters of the compound were predicted and compared with reported high nitrogen tetrazole derivatives.     

An Ab Initio Theoretical Study of 2,4,6‐Trinitro‐1,3,5‐Triazine, 3,6‐Dinitro‐1,2,4,5‐Tetrazine,and 2,5,8‐Trinitro‐Tri‐s‐Triazine

In order to evaluate 2,4,6‐trinitro‐1,3,5‐triazine (TNTAz), 3,6‐dinitro‐1,2,4,5‐tetrazine (DNTAz), and 2,5,8‐trinitro‐tri‐s‐triazine (TNTsTAz), the geometries of these compounds have been fully optimized employing the B3LYP density functional method and the AUG‐cc‐pVDZ basis set. The accurate gas phase enthalpies of formation have been obtained by using the atomization procedure and designing isodesmic reactions in which the parent rings are not destroyed. Based on B3LYP/AUG‐cc‐pVDZ calculated geometries and natural charges, the crystal structures have been predicted using the Karfunkel–Gdanitz method. Computed results show that there exists extended conjugation over the parent rings of these compounds. More energy content is reserved in DNTAz than in both TNTAz and TNTsTAz. The title compounds are much more sensitive than 1,3,5‐trinitrobenzene. The calculated detonation velocity of DNTAz reaches 9.73–9.88 km s⁻¹, being larger than those of CL‐20 and TNTAz. TNTsTAz has no advantage over the widely used energetic compounds such as RDX and HMX.     

Synthesis and Characterization of 1‐Azido‐2‐Nitro‐2‐Azapropane and 1‐Nitrotetrazolato‐2‐Nitro‐2‐Azapropane

1‐Azido‐2‐nitro‐2‐azapropane ( 1 ) was synthesized in high yield from 1‐chloro‐2‐nitro‐2‐azapropane and sodium azide. 1‐Nitrotetrazolato‐2‐nitro‐2‐azapropane ( 2 ) was synthesized in high yield from 1‐chloro‐2‐nitro‐2‐azapropane and silver nitrotetrazolate. The highly energetic new compounds ( 1 and 2 ) were characterized using vibrational (IR and Raman) and multinuclear NMR spectroscopy (¹H, ¹³C, ¹⁴N), elemental analysis and low‐temperature single crystal X‐ray diffraction. 1‐Azido‐2‐nitro‐2‐azapropane ( 1 ) represents a covalently bound liquid energetic material which contains both a nitramine unit and an azide group in the molecule. 1‐Nitrotetrazolato‐2‐nitro‐2‐azapropane ( 2 ) is a covalently bound room‐temperature stable solid which contains a nitramine group and a nitrotetrazolate ring unit in the molecule. Compounds 1 and 2 are hydrolytically stable at ambient conditions. The impact sensitivity of compound 1 is very high (<1 J) whereas compound 2 is less sensitive (<6 J).     

Poly‐α,β‐(3‐hydroxypropyl)‐DL‐aspartamide: A new drug carrier

Poly‐α,β‐(3‐hydroxypropyl)‐DL ‐aspartamide (PHPA) was synthesized by the ring‐open reaction of polysuccinimide (PSI) and 3‐hydroxypropylamine. The polymer was characterized by ¹H‐NMR, ¹³C‐NMR, FTIR, and GPC. Mark–Houwink coefficients were obtained from viscometry and GPC measurements, K = 5.53 × 10⁻³ and α = 0.78 in water. The acute toxicity of PHPA was examined and it revealed no death in ICR mice up to the dose treated of 15.3 kg/kg, and hematological parameters showed no significant difference between treated and control animals. The potential use of PHPA as a drug carrier was also investigated. In a typical case, a contraceptive drug, norethindrone (NET), was bonded to PHPA, and the drug sustained released as long as 120 days an in vitro test. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2411–2417, 2000     

Synthesis,characterization and thermal degradation of poly[2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate]

In this work, 2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate (BPHEMA) [monomer] was synthesized by the addition of methacrylic acid to 1‐epoxyethyl‐3‐bromophenyl‐3‐methyl cyclobutane. The monomer and poly(BPHEMA) were characterized by FT‐IR and [¹H] and [¹³C]NMR. Average molecular weight, glass transition temperature, solubility parameter, and density of the polymer were also determined. Thermal degradation of poly[BPHEMA] was studied by thermogravimetry (TG), FT‐IR. Programmed heating was carried out at 10 °C min⁻¹ from room temperature to 500 °C. The partially degraded polymer was examined by FT‐IR spectroscopy. The degradation products were identified by using FT‐IR, [¹H] and [¹³C]NMR and GC‐MS techniques. Depolymerization is the main reaction in thermal degradation of the polymer up to about 300 °C. Percentage of the monomer in CRF (Cold Ring Fraction) was estimated at 33% in the peak area of the GC curve. Intramolecular cyclization and cyclic anhydride type structures were observed at temperatures above 300 °C. The liquid products of the degradation, formation of anhydride ring structures and mechanism of degradation are discussed. © 1999 Society of Chemical Industry     

Synthesis,Characterization, and Energetic Properties of N‐Rich Salts of the 4,5‐Dicyano‐2H‐1,2,3‐triazole Anion

The synthesis and characterization of the 4,5‐dicyano‐2H‐1,2,3‐triazole anion in its 5‐aminotetrazole, 1,5‐diaminotetrazole, and 1,5‐diamino‐4‐methyl‐tetrazole salts are reported. All compounds were characterized by IR, ¹H NMR, and ¹³C NMR spectroscopy, as well as elemental analyses. Their thermal decompositions were investigated by TG‐DSC. The densities, combustion heats, and sensitivity properties were tested. Additionally, enthalpies of formation, detonation pressures, detonation velocities, and heats of detonation were calculated. The compounds have potential application in the energetic materials field.     

Synthesis and Characterization of 1,5‐Dinitro‐2,6‐bis(trinitromethyl)‐3a,4a,7a,8a‐tetrahydro‐[1,4]dioxino[2,3‐d:5,6‐d′]diimidazole (DNTNDI)

The polynitro imidazole derivative 1,5‐dinitro‐2,6‐bis(trinitromethyl)‐3a,4a,7a,8a‐tetrahydro‐[1,4]dioxino[2,3‐d:5,6‐d′]diimidazole (DNTNDI) was synthesized through nitration of 2‐(dinitromethylene)‐1H‐imidazol‐4‐ol in HNO₃/Ac₂O followed by cyclization of the di‐enol. It was characterized by NMR, IR, elemental analysis, and single‐crystal X‐ray diffraction analysis. Compound DNTNDI crystallizes in the orthorhombic space group P2(1)2(1)2(1). The thermal decomposition was studied with thermogravimetry/derivative thermogravimetry (TG/DTG) in a nitrogen atmosphere with a heating rate of 5 K min⁻¹. The TG/DTG analysis indicated that DNTNDI has 97.64 % mass loss between 127 °C and 173 °C by undergoing exothermic decomposition. The density of DNTNDI was determined as 1.906 g cm⁻³ at 293 K with an Ultrapycno 1000 Pycnometer. The denotation velocity and denotation pressure of DNTNDI were calculated as 9325 m s⁻¹ and 40 GPa by applying the LOTUSES (version 1.4) code, respectively. The oxygen balance of DNTNDI is 0 and its oxygen content amounts to 51.78 %, which is superior to that of new generation of chlorine‐free oxidizer ammonium dinitramide (ADN).     

Design and Synthesis of Hydrolytically Stable N‐Nitrourea Explosives

A series of high energy density compounds (HEDCs) based on N‐nitrourea were designed and their theoretical performances were calculated using the Gaussian programs. The predicted values of the energy density of these compounds are in the range 1.848–1.93 g cm⁻³, and their calculated VODs are in the range 6700–8305 m s⁻¹. Tetranitrodiglycoluril (TNDGU) ( 1 ) and tetranitrotriglycoluril (TNTGU) ( 2 ) were synthesized and characterized by NMR (¹H, ¹³C) and IR spectroscopy as well as elemental analyses. The structure of the aminolysis product ( 7 ) of TNDGU was further confirmed by single‐crystal X‐ray diffraction, which indicated that the structure belongs to P2₁/c space group in the monoclinic system.     

Synthesis,Structure, and Explosive Properties of a New Trinitrate Derivative of an Unexpected Condensation Product of Nitromethane with Glyoxal

In the condensation reaction of nitromethane with glyoxal carried out in an aqueous solution of sodium hydroxide, 3,6‐dinitro‐cyclohexane‐1,2,4,5‐tetraol was obtained (the expected product, described in the literature) and, unexpectedly, also tricyclic nitro‐triol (6b‐nitrohexahydro‐2H‐1,3,5‐trioxacyclopenta[cd]‐pentalene‐2,4,6‐triol), which has been unknown until now, was obtained as the main product. The structure of the compound was confirmed with ¹H NMR and ¹³C NMR spectroscopy, LR, and HR‐MS techniques and with single‐crystal X‐ray diffractometry. The tricyclic triol (formally a hemiacetal) was transformed into 6b‐nitrohexahydro‐2H‐1,3,5‐trioxacyclopenta[cd]‐pentalene‐2,4,6‐triyl trinitrate by reaction with 98 % HNO₃. Some explosive properties of this compound were determined including: friction and impact sensitivity, activation energy, detonation velocity, heat of combustion in an oxygen atmosphere and enthalpy of formation. The nitrate ester is a powerful explosive with performance close to that of pentaerythritol tetranitrate (PETN).