Starch from hull-less barley: II. Thermal,rheological and acid hydrolysis characteristics

Gelatinization, granular swelling, amylose leaching, viscosity and acid susceptibility characteristics of starches isolated from 10 hull-less barley (HB) genotypes [zero amylose (CDC Alamo), waxy (CDC candle, SB 94794, SB 94912, and SB 94917), normal amylose (Phoenix, CDC Dawn, SR 93102, and SB 94860) and high amylose (SB 94893 and SB 94897)] were monitored by differential scanning calorimetry (DSC), swelling power (SP), solubility, Brabender viscoamylography, and reaction with 2.2 N HCl (at 35 °C), respectively. DSC data showed that T_o, T_p, T_c, T_c–T_o, and ΔH ranged from 50.1–56.1, 58.1–64.5, 71.0–75.8, 17.9–24.0 °C and 9.6–14.2 J/g of amylopectin, respectively. In compound waxy (SB 94917) and compound normal (SR 93102 and SB 94860) starches, T_o and T_c–T_o were lower and higher, respectively, than in the other starches. ΔH followed the order: compound normal>waxy>normal≈zero amylose>high amylose>compound waxy. The SP followed the order: zero amylose>waxy>compound normal>normal>high amylose. A rapid increase in solubility occurred at lower temperatures (<70 °C) for zero amylose HB starch, however, this increase was gradual for the other starches. At 90 °C, solubility followed the order: high amylose>compound normal>normal>waxy. Zero amylose and waxy HB starches exhibited lower pasting temperatures, higher peak viscosities, and higher viscosity breakdown than normal HB starches. The extent of acid hydrolysis followed the order: zero amylose>compound waxy>waxy>normal>compound normal>high amylose. High correlations were observed between physicochemical properties and structural characteristics of HB starches.     

Amylose and amylopectin molecular fractions and chain length distribution of amylopectin in 12 varieties of Ghanaian sweet potato (Ipomoea batatas) flours

Sweet potato (Ipomoea batatas) is a commonly cultivated root crop in tropical and subtropical regions, including Ghana. Different varieties of sweet potato have been bred, in order to expand its utilisation within the food and industrial sector. This study analysed flours made from 12 recently developed Ghanaian sweet potato varieties in terms of their amylose and amylopectin molecular fractions and amylopectin chain length distribution. Starch content of the sweet potato flours ranged from 49 to 77 g/100 g dry matter, with 11 of the varieties containing above 60 g/100 g dry matter. An orange-fleshed variety, Apomuden, had the lowest amount of starch (48.9 g/100 g dry matter), while the cream-fleshed variety Histarch had the highest (77.3 g/100 g dry matter). The flours from the 12 sweet potato varieties had intermediate amounts of amylose, within the range 10–30 g/100 g dry matter, and showed typical molecular distribution according to size-exclusion chromatography (SEC). The fine structures of amylopectin, as revealed by anion-exchange chromatography, contained features common for starches of C-type X-ray pattern, but some structural differences were also observed.     

Relationships between various physicochemical,thermal and rheological properties of starches separated from different potato cultivars

Various physicochemical, thermal and rheological properties of starches separated from Indian potato cultivars were related to each other using the Pearson correlation. Amylose content, water‐binding capacity (WBC), swelling power, solubility, ash content, transmittance, syneresis and consistency coefficient (K) were determined. Amylose content was significantly correlated with swelling power (r = 0.904), transmittance (r = 0.656) and syneresis (r = 0.777) of the starches. Thermal properties such as transition temperatures (T_o, T_p and T_c), gelatinisation range (R), gelatinisation enthalpy (ΔH_gel) and peak height index (PHI) of the starches were measured using differential scanning calorimetry (DSC). T_o, T_p and T_c were positively correlated with swelling power and negatively correlated with solubility and WBC. PHI was positively correlated with WBC and negatively correlated with ash content and swelling power. R had a negative correlation with WBC (r = ?0.726) and PHI (r = ?0.737). A positive correlation between R and T_c was observed. WBC was negatively correlated with swelling power (r = ?0.749). Syneresis of potato starches was positively correlated with transmittance, ash content, swelling power and amylose content. K was positively correlated with amylose content (r = 0.587). The results showed a significant variation in various functional and thermal properties of starches separated from different potato cultivars. Copyright © 2004 Society of Chemical Industry     

Fine Structure,Thermal and Viscoelastic Properties of Starches Separated from Indica Rice Cultivars

Starches were separated from indica rice cultivars (PR‐113, Basmati‐370, Basmati‐386, PR‐115, IR‐64, and PR‐103) and evaluated using gel permeation chromatography (GPC), X‐ray diffraction, differential scanning calorimetry (DSC) and dynamic viscoelasticity . Debranching of starch with isoamylase and subsequent fractionation by GPC revealed 9.7–28.3% apparent amylose content, 3.7–5.0% intermediate fraction (mixture of short amylose and long side‐chains of amylopectin), 20.6–26.6% long side‐chains of amylopectin and 45.8–59.4% short side‐chains of amylopectin). IR‐64 starch with the highest crystallinity had the highest gelatinization temperatures and enthalpy, T_o, T_p, T_c, and ΔH_gel being 71.8, 75.9, 82.4°C and 5.1 J/g, respectively, whereas PR‐113 starch with lower crystallinity showed the lowest gelatinization temperatures (T_o, T_p, T_c, of 60.8, 65.7 and 72.2°C, respectively). Basmati‐386 starch exhibited two endotherms during heating, the first and second endotherm being associated with the melting of crystallites and amylose‐lipid complexes, respectively. T_o, T_p, T_c and ΔH_gel of the second endotherm of Basmati‐386 starch were 99.0, 100.1, 101.1°C and 2.0 J/g, respectively. During cooling, Basmati‐386 also showed an exotherm at a peak temperature of 87°C. PR‐113 starch with the highest amylose content and the lowest content of short side‐chains of amylopectin had the highest peak storage modulus (G′= 1.6×10⁴ Pa). The granules of PR‐113 starch were the least disintegrated after heating. The effects of heating starch suspensions at different temperatures (92°C, 130°C and 170°C) on intrinsic viscosity [η], transmittance and viscoelasticity were also studied to evaluate the extent of breakdown of the molecular structure. The intrinsic viscosity of starch suspensions heated at 92, 130 and 170°C ranged between 103–114, 96–110 and 28–93 mL/g. Transmittance value of starches cooked at 92°C decreased with increase in storage duration. All starches except PR103, cooked at 130°C also showed decrease in transmittance during storage, however, at lower rate. PR103 starch heated at 130°C did not show any change in transmittance up to a storage time of 48 h. The changes in viscoelasticity of starch pastes cooked at different temperatures during cooling and reheating were also evaluated. G′ and G′′ increased with decrease in temperature during cooling cycle. Starches heated at 130°C with apparent amylose content ≤ 21.2% showed an improvement in G′ and G′′ in comparison to the corresponding starches heated at 92°C, this improvement was observed to be higher in starches with lower amylose content. All starches heated at 170°C had a higher proportion of breakdown in molecular structure as indicated by lower G′ and G′′ than the same starches heated at 130 and 92°C.     

Relationships Between Selected Properties of Starches from Different Corn Lines

Starch was isolated from the corn lines obtained by crossing two different germ pools (MS and Tux pool) and evaluated for amylose content, swelling power, solubility, water binding capacity (WBC) and syneresis. The gelatinization (T_o, T_p, T_c, ΔH_gel, PHI & R) and pasting (pasting temperature, peak viscosity, breakdown viscosity, final viscosity and set back) properties of starches were measured using Differential Scanning Calorimeter (DSC) and Rapid Visco Analyzer (RVA), respectively. The relationships between different properties were also determined using pearson correlation coefficients. Amylose content was negatively correlated to swelling power and WBC (p < 0.05). Several significant relationships were also observed between thermal and pasting properties of isolated starches. Transition temperatures (T_o, T_p & T_c) and PHI showed positive correlation with peak, trough and breakdown viscosity (p < 0.05). Syneresis of starches was positively correlated to amylose content (p < 0.05).     

Physicochemical,Thermal, Morphological and Pasting Properties of Starches from some Indian Black Gram (Phaseolus mungo L.) Cultivars

The starches separated from thirteen different black gram cultivars were investigated for physicochemical, thermal, morphological and pasting properties. Amylose content, swelling power, solubility and water binding capacity of starches ranged between 30.2–34.6%, 16.0–22.3 g/g, 14.8–17.3% and 73.5–84.5%, respectively. The diameter of starch granules, measured using a laser‐light scattering particle‐size analyzer, varied from 12.8 to 14.3 μm in all black gram starches. The shape of starch granules varied from oval to elliptical. The transition temperatures (T_o, T_p and T_c) and enthalpy of gelatinization (ΔH_gel) determined using differential scanning calorimetry, ranged between 66.1–71.3, 71.0–76.2, 75.9–80.4°C and 6.7–9.4 J/g, respectively. Pasting properties of starches measured using the Rapid Visco Analyser (RVA) also differed significantly. Pasting temperature, peak viscosity, trough, breakdown, final viscosity and setback were between 75.8–80.3°C, 422–514, 180–311, 134–212, 400–439 and 102–151 Rapid Visco Units (RVU), respectively. Turbidity values of gelatinized starch pastes increased during refrigerated storage. The relationships between different properties were also determined using Pearson correlation coefficients. Amylose content showed a positive correlation with swelling power, turbidity and granule diameter. Swelling power showed a negative correlation with solubility and setback. T_o, T_p and T_c showed positive correlation with turbidity, pasting temperature and were negatively correlated to peak and breakdown viscosity.     

The influence of Cu(II) ions on physicochemical properties of potato starch oxidised by hydrogen peroxide

The study investigates the influence of Cu(II) ions used as a catalyst on the effectiveness of potato starch oxidation by hydrogen peroxide, and compares the physicochemical properties of the modified starches. The starch was oxidised by H₂O₂ alone and with the addition of Cu(II) ions at three concentrations: 0.1, 0.2 or 0.3 g per 100 g d.m. of starch. The oxidised starches were examined for the content of carboxyl groups, carbonyl groups, amylose and copper, and for water‐binding capacity and water solubility at temperatures of 60 and 80°C. Colour parameters (L*a*b*), susceptibility to retrogradation, thermodynamic characteristics of pasting, intrinsic viscosity and pasting characteristic by RVA were also determined. The results indicate that the concentration of Cu(II) ions added as a catalyst has an effect on both the effectiveness of the oxidation process and the physicochemical properties of starch.     

Physicochemical and Gelatinization Properties of Starches Separated from Various Rice Cultivars

Morphological, viscoelastic, hydration, pasting, and thermal properties of starches separated from 10 different rice cultivars were investigated. Upon gelatinization, the G′ values of the rice starch pastes ranged from 37.4 to 2057 Pa at 25 °C, and remarkably, the magnitude depended on the starch varieties. The rheological behavior during gelatinization upon heating brought out differences in onset in G′ and degree of steepness. The cultivar with high amylose content (Goami) showed the lowest critical strain (γ_c), whereas the cultivars with low amylose content (Boseokchal and Shinseonchal) possessed the highest γ_c. The amylose content in rice starches affected their pasting properties; the sample possessing the highest amylose content showed the highest final viscosity and setback value, whereas waxy starch samples displayed low final viscosity and setback value. The onset gelatinization temperatures of the starches from 10 rice cultivars ranged between 57.9 and 64.4 °C. The amylose content was fairly correlated to hydration and pasting properties of rice starches but did not correlate well with viscoelastic and thermal characteristics. The combined analysis of hydration, pasting, viscoelastic, and thermal data of the rice starches is useful in fully understanding their behavior and in addressing the processability for food applications.     

A comparative study of Indian rice starches using different modification model solutions

Starches extracted from rice flour from broken kernels of three rice cultivars (PUSA-44, PR-106 and PR-114) have been selected for modification studies due to their varied amylose content. Model solutions with different types and concentrations of modifying agents were prepared for comparative study of effect of amylose variation among the varieties and also individual and combined effect of modifying agents used. There was an increase in hot paste viscosity at 90 °C in modified starches whereas, cold paste viscosity decreased upon modification. A greater effect was observed with in dual modification of starches. The total set back was significantly lower in modified starches indicating the decreased retro-gradation of starch gels upon modification. The DSC results showed decreases in ΔH, T_o, T_p, and T_c, indicating that hydroxypropylation cross-linking and acetylation affect the structure of starches granules, requiring less heat for gelatinization. Pasting and thermal properties of PUSA-44 were significantly different from those of PR-106 and PR-114, probably due to relative higher amylose contents in the former. As observed in this study, bi-functional modifying agents can reduce the extent of cross-linking. Acetylation modified the morphology of the starch. However, hydroxypropylation cross-linking and dual modification retained the original structure with little modification.     

Properties of Starch Separated From Ten Mung Bean Varieties and Seeds Processing Characteristics

Starch samples from ten mung bean cultivars grown in china were isolated, and their morphology, physicochemical, thermal, and pasting properties were evaluated. The objectives of the study were to investigate the starch properties and processing characteristics of different mung bean varieties, and to establish the basic foundation of improving the functionality of mung beans and their starch grown in the region. The mung bean starches showed the kidney-shaped, elliptical, small spherical and dome-shaped granules, and the starches granule size varied between 5 and 40 μm. Total starch content, amylose content, solubility, and swelling power ranged from 54.73% to 57.99%, 40.44% to 41.82%, 13.72% to 17.67%, and 17.27% to 20.55%, respectively. The pasting properties were determined using a rapid visco analyzer, and various mung bean starches exhibited different pasting profiles. Different starches differed in transition temperatures (T _o, T _p, and T _c), gelatinization temperature range (ΔT _r), and enthalpy of gelatinization (ΔH) according to differential scanning calorimeter analysis. Hydration coefficient, degree of gelatinization, and hardness of mung bean varieties ranged from 51.97% to 84.46%, 62.99% to 95.11%, and 26.07 N to 112.11 N, respectively. This study indicated that starches separated from different mung bean cultivars possess different physicochemical characteristics, and various mung beans cultivars showed diverse processing properties.     

Effect of hydroxypropylation on physical and rheological properties of sweet potato starch

Sweet potato starches (SPS) were hydroxypropylated to evaluate the effect of molar substitution (MS, 0.042-0.153) on the rheological properties, thermal properties, freeze-thaw stability, paste clarity, and gel strength of hydroxypropylated sweet potato starches (HPSPS). The swelling power and solubility values of HPSPS were higher than those of native sweet potato starch (SPS) and increased with an increase in MS. The transition temperatures (T_o, T_p, and T_c), and enthalpy (ΔH) of gelatinization of HPSPS were lower than those of native SPS, and significantly decreased with an increase in MS.Rheological properties of HPSPS pastes were measured under the conditions of steady and dynamic shear. Their consistency index (K), apparent viscosity (η_a,100), Casson yield stress (σ_oc), complex viscosity (η*), and dynamic moduli (G′ and G″) values decreased with an increase in MS, while their flow behavior index (n) and tan δ (ratio of G″/G′) values increased. The dependence of apparent viscosity on temperature followed the Arrhenius model for all samples. The paste clarity of HPSPS paste was more pronounced with increasing MS of hydroxypropyl groups. The HPSPS gels showed lower gel strength and also better freeze-thaw stability with a significant decrease in syneresis (g/100 g) compared to native SPS.     

Physicochemical,Pasting, Thermal and Morphological Characteristics of Indian Water Chestnut (Trapa natans) Starch

Starch extracted from Indian water chestnut was investigated for its physicochemical characteristics. The results were compared with those obtained from two commercial starches (corn and potato). The pasting properties were tested in the Rapid Visco Analyser and thermal properties with a differential scanning calorimeter. Water chestnut starch possessed higher breakdown viscosity (BV) and setback viscosity (SV) than corn and potato starches. However, the pasting temperature of water chestnut starch was not significantly different from that of corn starch. Lower ΔH_gel values were obtained for water chestnut starch than for the other two starches whereas the onset, peak and conclusion temperatures of gelatinization (T_o, T_p and T_c) for water chestnut starch were quite comparable with corn starch. Scanning electron micrographs showed similarity in starch granule shape between water chestnut and potato starch with corn starch showing surface wrinkles on starch granule surfaces.     

Studies on Dioscorea rotundata Starch Properties

Starch from six clonal selections of Dioscorea rotundata was isolated by standard procedure. The yield was between 20–24%. Various properties of these starches were compared. Granule size, 2% viscosity, peak viscosity, clarity, sol stability, total and soluble amylose contents were studied and only small variations were observed in the properties except paste viscosities among the clonal selections. The phosphorus content of Dioscorea starch was found to be three times as much as cassava starch, but low compared to potato starch. The higher gel strength of D. rotundata starch paste compared to cassava gel may be attributed to the phosphate linkages among the starch molecules in the granules.     

Formation of starch spherulites: Role of amylose content and thermal events

Commercial maize starches and potato starches of two cultivars differing in physicochemical composition (granule size distribution; amylose to amylopectin ratio) and crystallinity were heated to 180 °C and then cooled by fast quench using a differential scanning calorimeter (DSC), in order to produce spherulitic starch morphologies. Among the raw maize starches, waxy maize starch had highest relative crystallinity (49%) whereas a lowest crystallinity of 33–39% was calculated for high-amylose maize starches. Potato starches showed a relative crystallinity of 50%. The temperatures and enthalpies of gelatinisation and melting varied among all the starches. High-amylose maize starches showed higher transition temperatures of gelatinisation (T_gel), whereas waxy maize starch had lowest T_gel and enthalpy of gelatinisation (ΔH_gel). Similarly, a considerable variation in parameters related with crystalline melting (T_m1, T_m2 and ΔH_m1, ΔH_m2) was observed for different starches. The superheated gels of different starches treated using DSC were subjected to polarised microscopy, to confirm the formation of spherulites. Both the high-amylose starch gels showed the presence of spherulites exhibiting birefringence and a weak crystalline pattern. No birefringence was observed for waxy maize starch gel, while potato starch gels had some birefringence. The particle size distribution of high-amylose maize starch gels analysed through Zetasizer showed the sizes of spherulitic particles fall in the range of 300 nm–900 nm. The scanning electron micrographs of the dried high-amylose maize starch gels showed the presence of round spherulites consisting of several aggregated spherulitic particles. Amylose content and melting of crystallites during heating play an important role during recrystallisation of amylose (spherulite morphologies).     

Some properties of potatoes and their starches II. Morphological,thermal and rheological properties of starches

The physico-chemical, morphological, thermal and rheological properties of the starches separated from different potato cultivars (Kufri Jyoti, Kufri Badshah and Pukhraj) were studied. The starches separated from the mealier cultivars (Kufri Jyoti and Kufri Badshah) showed lower transition temperatures (T_o; T_p and T_c), peak height indices (PHI), and higher gelatinization temperature range (R) and enthalpies of gelatinization (ΔH_gel) than the starch from the least mealy cultivar (Pukhraj). Swelling power, solubility, amylose content and transmittance values were observed to be higher for Kufri Jyoti and Kufri Badshah potato starches, while turbidity values were lower for these starches. The rheological properties of starches, measured using a dynamic rheometer, showed significant variation in the peak G′, G″ and peak tan δ values. Kufri Badshah and Kufri Jyoti starches showed higher peak G′, G″ and lower peak tan δ values than Pukhraj starch during heating and cooling cycles. Kufri Jyoti and Kufri Badshah starches showed higher breakdown in G′ than starch from the Pukhraj potato cultivar. The large-sized granules of the starches from Kufri Badshah and Kufri Jyoti appeared to be associated with higher values of peak G′ and G″ and consistency coefficient. Starch from the least mealy cultivar (Pukhraj) showed higher retrogradation, which increased progressively during storage at 4 °C for 120 h.     

Gelatinization Characteristics of Starch from du,wx, ae,and ae wx Endosperm of Sweet Corn Inbred la5125

Starch gelatinization in excess water was studied by differential scanning calorimetry for the mutants dull (du), waxy (wx), and amylose extender (ae), and the double mutant amylose-extender, waxy (ae wx) from the Ia5125 sweet corn inbred background. Onset temperature (T_o), peak temperature (T_max), and enthalpy (ΔH) were determined. For du and wx starches T_max was within 1°C of the value for the normal starch (T_max = 69.4°C). For starches from ae and ae wx mutants, T_max was 7–8°C higher than the normal starch. The highest enthalpies were observed for wx (3.26 cal/g) and ae wx (3.39 cal/g) starches; ae (2.93 cal/g) and normal (2.52 cal/g) starches were intermediate, and du (2.32 cal/g) starch had the lowest enthalpy. The endotherm of the ae starch was completed at just above 100°C, in distinction to reports for ae mutants from dent lines. Although the ae wx endotherm occurred at a higher temperature than the wx, the endotherm was sharpened relative to the ae endotherm, and was complete at 90°C.     

Chemical and Physical Characterisation of Grain Tef [Eragrostis tef (Zucc.) Trotter] Starch Granule Composition

Chemical and physical properties of starch granules isolated from five grain tef (Eragrostis tef) varieties were characterised and compared with those of maize starch. Endogenous starch lipids extracted with hot water‐saturated n‐butanol and total starch lipids extracted with n‐hexane after HCl hydrolysis were 7.8 mg/g (mean) and 8.9 mg/g (mean), respectively, slightly lower than in the maize starch granules. The starch phosphorus content (0.65 mg/g) was higher than that of maize starch but virtually the same as reported for rice starch. The starch granule‐swelling factor was lower than that of maize starch and extent of amylose leaching was higher. The starch X‐ray diffraction pattern was characteristic of A type starch with a mean crystallinity of 37%, apparently lower than the crystallinity of maize starch and more similar to that reported for rice and sorghum starches. The starch DSC gelatinisation temperature was high, like for other tropical cereals; T_o, T_p, T_c and ΔH were in the range 63.8—65.4, 70.2—71.3, 81.3—81.5 °C and 2.28—7.22 J/g, respectively. The lower swelling, apparently lower percentage crystallinity and lower DSC gelatinisation endotherms than maize starch suggest that the proportion of long amylopectin A chains in tef starch is smaller than in maize starch.     

Physicochemical,morphological, thermal and rheological properties of starches separated from kernels of some Indian mango cultivars (Mangifera indica L.)

The starches separated from kernels of five different Indian mango cultivars (Chausa, Totapuri, Kuppi, Langra and Dashehari) were investigated for physicochemical, morphological, thermal and rheological properties. Mean granule length and width of the starches separated from mango cultivars ranged between 15.8–21.7 and 8.7–14.1 μm, respectively. The shape of starch granules varied from oval to elliptical. Amylose content of mango kernel starches from different cultivars ranged from 9.1 to 16.3%. Totapuri kernel starch, with the largest mean granular size, had the highest amylose content, while Chausa kernel starch, with the lowest mean granular size had the lowest amylose content. The transition temperatures (T_o, T_p and T_c) and enthalpy of gelatinization (ΔH_gel) were determined using differential scanning calorimetry (DSC). T_o, T_p and T_c varied from 73.4 to 76.3, 78.1 to 80.3 and 83.0 to 85.7 °C, respectively. Chausa kernel starch showed the highest T_o, T_p, T_c, ΔH_gel and peak height index among starches from different mango cultivars. The rheological properties of the starches from different mango cultivars measured using a dynamic rheometer, showed significant variations in the peak G′, G″ and peak tan δ values. Totapuri kernel starch showed the highest peak G′, G″, breakdown in G′ and lowest peak tan δ values. The large-size granules of Totapuri kernel starch appeared to be associated with higher values of peak G′ and G″. The turbidity of the gelatinized aqueous starch suspensions, from all mango cultivars, increased with increase in storage period. Dashehari starch paste showed lower turbidity values than other mango cultivars.     

Comparative Studies on Some Physico-chemical, Thermal, Morphological, and Pasting Properties of Acid-thinned Jicama and Maize Starches

Comparative studies on acid hydrolysis of jicama and maize starch were carried out using concentrations of hydrochloric acid of 1.5%, 3.0%, and 4.5% (w/v), for 3 and 6 h, at 40°C. Native maize and jicama starches showed important morphological, thermal, and structural differences from those of tubers and cereals which potentially offer diverse industrial applications. Jicama starch showed low amylose content (12%) and small size of starch granules. Due to these characteristics, jicama starch was more susceptible to degradation during hydrolysis process than maize starch. Under the experimental conditions employed, the acid degradation was not particularly severe, as shown by scanning electronic microscopy analysis which showed small degraded zones and similar X-ray patterns in both starches. However, jicama starch was more susceptible to acid hydrolysis than maize starch, as revealed by the considerable increase in water solubility index, damaged starch, and crystallinity values. Also, the higher susceptibility of jicama starch than maize starch to the hydrolysis conditions was reflected in the sugar content release during hydrolysis. The relative crystallinity of hydrolyzed maize starches decreased during hydrolysis, while those of hydrolyzed jicama starches increased attributable to the lower amylose content of jicama starch in relation to maize starch. Maize and jicama hydrolyzed starches showed low viscosity values with relation to their native starch counterparts. However, native jicama starch showed lower viscosity values than maize starch, suggesting a lower internal stability of the starch granules during hydrolysis. Both native and hydrolyzed maize starches showed higher enthalpy, T _o, T _p, and T _c values than jicama starch and the broadening of the endotherms decreased during the hydrolysis of both starches.     

Digestibility of Sweet Potato Raw Starches by Glucoamylase

Three crude glucoamylase preparations from Rhizopus sp., Chalara paradoxa and Aspergillus sp. K-27 were used to determine the digestibility of raw starches from eight sweet potato varieties. Granule sizes and amylose contents were also measured. The average granule sizes ranged between 10.5 and 14.2 μm. The amylose contents varied between 18.2 and 21.8%. The hydrolysis rates for the raw starches by any of the three glucoamylases were similar. However, starch of the variety Hi-starch had a slightly lower hydrolysis rate than other starches when Rhizopus sp, enzyme was used.