Designing Highly Conductive Sodium-Based Metal Hydride Nanocomposites: Interplay between Hydride and Oxide Properties

Sodium-based complex hydrides have recently gained interest as electrolytes for all-solid-state batteries due to their light weight and high electrochemical stability. Although their room temperature conductivities are not sufficiently high for battery application, nanocomposite formation with metal oxides has emerged as a promising approach to enhance the ionic conductivity of complex hydrides. This enhancement is generally attributed to the formation of a space charge layer at the hydride-oxide interface. However, in this study it is found that the conductivity enhancement results from interface reactions between the metal hydride and the oxide. Highly conductive NaBH₄ and NaNH₂/oxide nanocomposites are obtained by optimizing the interface reaction, which strongly depends on the interplay between the surface chemistry of the oxides and the reactivity of the metal hydrides. Notably, for NaBH₄, the best performance is obtained with Al₂O₃, while NaNH₂/SiO₂ is the most conductive NaNH₂/oxide nanocomposite with conductivities of, respectively, 4.7 × 10⁻⁵ and 2.1 × 10⁻⁵ S cm⁻¹ at 80 °C. Detailed structural characterization reveals that this disparity originates from the formation of different tertiary interfacial compounds, and is not only a space charge effect. These results provide useful insights for the preparation of highly conductive nanocomposite electrolytes by optimizing interface interactions.     

Long Cycle Life Lithium Metal Batteries Enabled with Upright Lithium Anode

The lithium metal anode is the holy grail of the battery field due to its lowest reduction potential and high specific capacity; however, its application is hindered by severe safety hazards and inferior cyclic stability due to dendrites and unstable solid electrolyte interphase (SEI). Aiming at these problems, a coiled Li anode with a unique upright structure is proposed. The upright structure endows coiled Li anode with abundant inner reaction interface/space/mass for lithium deposit/storage/transport, which can induce the inner growth of Li dendrites and SEI. The Li⁺ transport/deposit behavior and mechanism of coiled Li anode are clarified via in situ observation and numerical simulation. Benefiting from the small volume expansion and sufficient Li⁺ transport, the coiled Li anodes combined with Li₄Ti₅O₁₂ cathodes achieve a long life of over 2000 cycles at 5C with a reversible capacity of 129 mAh g^?1 and 100% Coulombic efficiency.     

One‐Step Synthesis of Highly Ordered Mesoporous Silica Monoliths with Metal Oxide Nanocrystals in their Channels

A simple, one‐step synthetic route to prepare ordered mesoporous silica monoliths with controllable quantities of metal oxide nanocrystals in their channels is presented. The method is based on the assisted assembly effect for mesostructure‐directing of the metal complexes formed by the interaction of metal ions with the –O– groups of copolymers. Highly ordered hexagonal silica monoliths, loaded with various metal oxide nanocrystals, including those of Cr₂O₃, MnO, Fe₂O₃, Co₃O₄, NiO, CuO, ZnO, CdO, SnO₂, and In₂O₃, can be obtained by this one‐step pathway. In the NiO/SiO₂ nanocomposite, nickel oxide nanorods with face‐centered cubic lattices are formed at low doping ratios, and they can be transformed into nanowires by increasing the quantities of the precursors. In the Fe₂O₃/SiO₂ nanocomposites, a one‐dimensional assembly of iron oxide nanoparticles is observed. In the In₂O₃/SiO₂ nanocomposites, single crystal nanowires with high aspect ratios are obtained. For the other metal oxide nanocomposites, including Cr₂O₃, MnO, Co₃O₄, CuO, ZnO, CdO, and SnO, only crystalline nanorods are obtained. N₂ sorption results of the metal oxide/SiO₂ mesostructured nanocomposites reveal that nanocrystals inside the pores do not severely decrease the pore volume or the Brunauer–Emmett–Teller (BET) surface area of the mesoporous silica host. The bandgaps of SnO₂ and In₂O₃ nanocrystals, calculated from UV‐vis spectra, are much larger than the corresponding bulk materials, implying the quantum confinement effect in the small particles. Co₃O₄/SiO₂ mesostructured nanocomposites catalyze the complete combustion of CH₄. These studies provide a new and simple method for templating synthesis of metal oxide nanostructures.     

Room‐Temperature Micropillar Growth of Lithium–Titanate–Carbon Composite Structures by Self‐Biased Direct Current Magnetron Sputtering for Lithium Ion Microbatteries

Here, an unidentified type of micropillar growth is described at room temperature during conventional direct‐current magnetron sputtering (DC‐MS) deposition from a Li₄Ti₅O₁₂+graphite sputter target under negative substrate bias and high operating pressure. These fabricated carbon–Li₂O–TiO₂ microstructures consisting of various Li₄Ti₅O₁₂/Li₂TiO₃/Li_x TiO₂ crystalline phases are demonstrated as an anode material in Li‐ion microbatteries. The described micropillar fabrication method is a low‐cost, substrate independent, single‐step, room‐temperature vacuum process utilizing a mature industrial complementary metal–oxide–semiconductor (CMOS)‐compatible technology. Furthermore, tentative consideration is given to the effects of selected deposition parameters and the growth process, as based on extensive physical and chemical characterization. Additional studies are, however, required to understand the exact processes and interactions that form the micropillars. If this facile method is further extended to other similar metal oxide–carbon systems, it could offer alternative low‐cost fabrication routes for microporous high‐surface area materials in electrochemistry and microelectronics.     

3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries

Lithium‐metal batteries are of particular interest for next‐generation electrical energy storage because of their high energy density on both volumetric and gravimetric bases. Effective strategies to stabilize the Li‐metal anode are the prerequisite for the progress of these exceptional storage technologies, such as Li–S and Li–O₂ batteries. Various challenges, such as uneven Li electrodeposition, anode volume expansion, and dendrite‐induced short‐circuit have hindered the practical application of rechargeable Li‐metal batteries. Herein, a one‐step facile and cost‐effective strategy for stabilizing lithium‐metal batteries via 3D porous Cu current collector/Li‐metal composite anode is reported. The porous structure of the composite electrode provides a “cage” for the redeposition of “hostless” lithium and accommodates the anode volume expansion during cycling. Compared with planar Cu foil, its high specific surface area favors the electrochemical reaction kinetics and lowers the local current density along the anode. It leads to low interfacial resistance and stabilizes the Li electrodeposition. On this basis, galvanostatic measurements are performed on both symmetric cells and Li/Li₄Ti₅O₁₂ cells and it is found that the electrodes exhibit exceptional abilities of promoting cell lifetime and stabilizing the cycling behavior. Although this work focuses on lithium metal, this novel tactic is easy to generalize to other metal electrodes.     

Mechanism of Phase Propagation During Lithiation in Carbon‐Free Li4Ti5O12 Battery Electrodes

Functional electrodes for batteries share a common design rule by which high electronic and ionic conductivity pathways must exist throughout the electrode in its pristine state. Notable amounts of conductive carbon additive in the composite electrode are usually included to form an electronically conductive matrix. However, excellent high rate cycling performance has been achieved in electrodes composed of the insulating Li₄Ti₅O₁₂ without any conductive additives. This behavior opens the possibility of a new paradigm for designing functional electrodes by which high electronic conductivity in the pristine electrode is not required. The mechanism of operation that enables such unexpected electrochemical behavior is evaluated and discussed. Electronically conductive pathways due to the reduction of Ti⁴⁺ to Ti³⁺ form and percolate throughout the Li₄Ti₅O₁₂ electrode in the early stage of Li insertion, eliminating the need for conductive additives. This work highlights the importance of the mass and charge transport properties of the intermediate states during cycling and of good interparticle ohmic contact in the electrode. This physical behavior can lead to novel system designs with improved battery utilization and energy density.     

A Mixed Lithium‐Ion Conductive Li2S/Li2Se Protection Layer for Stable Lithium Metal Anode

Constructing artificial solid‐electrolyte interphase (SEI) on the surface of Li metal is an effective approach to improve ionic conductivity of surface SEI and buffer Li dendrite growth of Li metal anode. However, constructing of homogenous ideal artificial SEI is still a great challenge. Here, a mixed lithium‐ion conductive Li₂S/Li₂Se (denoted as LSSe) protection layer, fabricated by a facile and inexpensive gas–solid reaction, is employed to construct stable surface SEI with high ionic conductivity. The Li₂S/Li₂Se‐protected Li metal (denoted as LSSe@Li) exhibits a stable dendrite‐free cycling behavior over 900 h with a high lithium stripping/plating capacity of 3 mAh cm^?2 at 1.5 mA cm^?2 in the symmetrical cell. Compared to bare Li anode, full batteries paired with LiFePO₄, sulfur/carbon, and LiNi_0.6Co_0.2Mn_0.2O₂ cathodes all present better battery cycling and rate performance when LSSe@Li anode is used. Moreover, Li₂Se exhibits a lower lithium‐ion migration energy barrier in comparison with Li₂S which is proved by density functional theory calculation.     

Prestoring Lithium into Stable 3D Nickel Foam Host as Dendrite‐Free Lithium Metal Anode

Lithium metal is considered a “Holy Grail” of anode materials for high‐energy‐density batteries. However, both dendritic lithium deposition and infinity dimension change during long‐term cycling have extremely restricted its practical applications for energy storage devices. Here, a thermal infusion strategy for prestoring lithium into a stable nickel foam host is demonstrated and a composite anode is achieved. In comparison with the bare lithium, the composite anode exhibits stable voltage profiles (200 mV at 5.0 mA cm^?2) with a small hysteresis beyond 100 cycles in carbonate‐based electrolyte, as well as high rate capability, significantly reduced interfacial resistance, and small polarization in a full‐cell battery with Li₄Ti₅O₁₂ or LiFePO₄ as counter electrode. More importantly, in addition to the fact that lithium is successfully confined in the metallic nickel foam host, uniform lithium plating/stripping is achieved with a low dimension change (merely ≈3.1%) and effective inhibition of dendrite formation. The mechanism for uniform lithium stripping/plating behavior is explained based on a surface energy model.     

Ultrafast Electrochemical Growth of Lithiophilic Nano-Flake Arrays for Stable Lithium Metal Anode

Lithium dendrites caused by nonuniform Li⁺ flux leads to the capacity fade and short-circuit hazard of lithium metal batteries. The solid electrolyte interface (SEI) is critical to the uniformity of Li⁺ flux. Here, an ultrafast preparation of uniform and vertical Cu₇S₄ nano-flake arrays (Cu₇S₄ NFAs) on the Cu substrate is reported. These arrays can largely improve the lithiophilicity of the anode and form Li₂S-enriched SEI due to the electrochemical reduction of Cu₇S₄ NFAs with lithium. A further statistical analysis suggests that the SEI, with a higher content of Li₂S, is more effective to inhibit the formation of lithium dendrites and yields less dead lithium. A quite stable coulombic efficiency of 98.6% can be maintained for 400 cycles at 1 mA cm^–2. Furthermore, at negative to positive electrode capacity ratio of 1.5 (N/P = 1.5), the full battery of Li@Cu₇S₄ NFAs||S shows 83% capacity retention after 100 cycles at 1 C, much higher than that of Li@Cu||S (33%). The findings demonstrate that high Li₂S content in the SEI is crucial for the dendrite inhibition to achieve better electrochemical performance.     

High Voltage,Transition Metal Complex Enables Efficient Electrochemical Energy Storage in a Li‐Ion Battery Full Cell

Efficient energy storage systems impact profoundly the renewable energy future. The performance of current electrical energy storage technologies falls well short of requirements for using electrical energy efficiently in transportation, commercial, and residential applications. This paper explores the possibility by using transition‐metal‐based complexes as active materials in a Li‐ion battery full cell that synergizes the concept of both lithium‐ion batteries and redox flow batteries. A cathode made from transition metal complex, [Fe(bpy)₃](BF₄)₂, exhibits high discharge voltage approaching 4 V (vs Li/Li⁺). When coupled with a Li₄Ti₅O₁₂ anode, the Li‐ion full battery exhibits a cell voltage exceeding 2.2 V and decent cycling efficiencies with Coulombic efficiency and energy/voltage efficiencies above 99% and 92%/93%, respectively. Such a Li‐ion battery full cell offers distinct features such as low cost and flexibility in molecular structure design. The result reveals a generic design route toward iron‐based complexes as cathode materials with good electrochemical performances.     

A Self‐Standing and Flexible Electrode of Li4Ti5O12 Nanosheets with a N‐Doped Carbon Coating for High Rate Lithium Ion Batteries

Flexible energy‐storage devices have attracted growing attention with the fast development of bendable electronic systems. Thus, the search for reliable electrodes with both high mechanical flexibility and excellent electron and lithium‐ion conductivity has become an urgent task. Carbon‐coated nanostructures of Li₄Ti₅O₁₂ (LTO) have important applications in high‐performance lithium ion batteries (LIBs). However, these materials still need to be mixed with a binder and carbon black and pressed onto metal substrates or, alternatively, by be deposited onto a conductive substrate before they are assembled into batteries, which makes the batteries less flexible and have a low energy density. Herein, a simple and scalable process to fabricate LTO nanosheets with a N‐doped carbon coating is reported. This can be assembled into a film which can be used as a binder‐free and flexible electrode for LIBs that does not require any current collectors. Such a flexible electrode has a long life. More significantly, it exhibits an excellent rate capability due to the thin carbon coating and porous nanosheet structures, which produces a highly conductive pathway for electrons and fast transport channels for lithium ions.     

Enhanced Interfacial Stability of Hybrid‐Electrolyte Lithium‐Sulfur Batteries with a Layer of Multifunctional Polymer with Intrinsic Nanoporosity

The use of lithium‐ion conductive solid electrolytes offers a promising approach to address the polysulfide shuttle and the lithium‐dendrite problems in lithium‐sulfur (Li‐S) batteries. One critical issue with the development of solid‐electrolyte Li‐S batteries is the electrode–electrolyte interfaces. Herein, a strategic approach is presented by employing a thin layer of a polymer with intrinsic nanoporosity (PIN) on a Li⁺‐ion conductive solid electrolyte, which significantly enhances the ionic interfaces between the electrodes and the solid electrolyte. Among the various types of Li⁺‐ion solid electrolytes, NASICON‐type Li_1+xAl_xTi_2‐x(PO₄)₃ (LATP) offers advantages in terms of Li⁺‐ion conductivity, stability in ambient environment, and practical viability. However, LATP is susceptible to reaction with both the Li‐metal anode and polysulfides in Li‐S batteries due to the presence of easily reducible Ti⁴⁺ ions in it. The coating with a thin layer of PIN presented in this study overcomes the above issues. At the negative‐electrode side, the PIN layer prevents the direct contact of Li‐metal with the LATP solid electrolyte, circumventing the reduction of LATP by Li metal. At the positive electrode side, the PIN layer prevents the migration of polysulfides to the surface of LATP, preventing the reduction of LATP by polysulfides.     

Binary Li4Ti5O12‐Li2Ti3O7 Nanocomposite as an Anode Material for Li‐Ion Batteries

Li₄Ti₅O₁₂ typically shows a flat charge/discharge curve, which usually leads to difficulty in the voltage‐based state of charge (SOC) estimation. In this study, a facile quench‐assisted solid‐state method is used to prepare a highly crystalline binary Li₄Ti₅O₁₂‐Li₂Ti₃O₇ nanocomposite. While Li₄Ti₅O₁₂ exhibits a sudden voltage rise/drop near the end of its charge/discharge curve, this binary nanocomposite has a tunable sloped voltage profile. The nanocomposite exhibits a unique lamellar morphology consisting of interconnected nanograins of ≈20 nm size with a hierarchical nanoporous structure, contributing to an enhanced rate capability with a capacity of 128 mA h g^?1 at a high C‐rate of 10 C, and excellent cycling stability.     

Synthesis of Highly Stable LTO/rGO/SnO2 Nanocomposite via In Situ Electrostatic Self-Assembly for High-performance Lithium-Ion Batteries

The practical application of spinel-type lithium titanate Li₄Ti₅O₁₂ (LTO) lithium-ion batteries is hindered by its poor conductivity and relatively low capacity. To address these issues, an LTO/reduced graphene oxide (rGO)/SnO₂ is synthesized via an in situ electrostatic self-assembly and hydrothermal reduction process. Density function theory (DFT) simulations are conducted to understand the geometrical structures of these composites and the energy storage mechanisms. The DFT results confirm that the introduction of rGO and SnO₂ to LTO increases the overall conductivity, improves the structure stability, and increases Li-ion diffusion speed.     

Enhancing Ultrafast Lithium Ion Storage of Li4Ti5O12 by Tailored TiC/C Core/Shell Skeleton Plus Nitrogen Doping

It is of great importance to reinforce electronic and ionic conductivity of Li₄Ti₅O₁₂ electrodes to achieve fast reaction kinetics and good high‐power capability. Herein, for the first time, a dual strategy of combing N‐doped Li₄Ti₅O₁₂ (N‐LTO) with highly conductive TiC/C skeleton to realize enhanced ultrafast Li ion storage is reported. Interlinked hydrothermal‐synthesized N‐LTO nanosheets are homogeneously decorated on the chemical vapor deposition (CVD) derived TiC/C nanowires forming binder‐free N‐LTO@TiC/C core–branch arrays. Positive advantages including large surface area, strong mechanical stability, and enhanced electronic/ionic conductivity are obtained in the designed integrated arrays and rooted upon synergistic TiC/C matrix and N doping. The above appealing features can effectively boost kinetic properties throughout the N‐LTO@TiC/C electrodes to realize outstanding high‐rate capability at different working temperatures (143 mAh g^?1/10 C at 25 °C and 122 mAh g^?1/50 C at 50 °C) and notable cycling stability with a capacity retention of 99.3% after 10 000 cycles at 10 C. Moreover, superior high‐rate cycling life is also demonstrated for the full cells with N‐LTO@TiC/C anode and LiFePO₄ cathode. The dual strategy may provoke wide interests in fast energy storage areas and motivate the further performance improvement of power‐type lithium ion batteries (LIBs).     

Artificial Graphite Paper as a Corrosion-Resistant Current Collector for Long-Life Lithium Metal Batteries

The employment of ultra-thin lithium metal anode with high loading cathode is the key to realizing high-energy-density rechargeable lithium batteries. Ultra-thin lithium foils are routinely loaded on a copper substrate in batteries, however, the close contact of these two metals causes galvanic corrosion in the presence of electrolyte, which results in irreversible consumption of lithium and decomposition of electrolyte. Herein, a lightweight and highly conductive flexible graphite paper (GP) is applied to replace Cu foil as the current collector for lithium metal anode. It is demonstrated that the application of GP prevents galvanic corrosion and maintains intimate and steady contact between Li foil and GP current collector during cycling, thereby improving the electrochemical performance of the battery. A 1.08 Ah pouch cell assembled with Li@GP anode and LiNi_0.8Co_0.1Mn_0.1O₂ cathode exhibits a long lifetime of 240 cycles with a capacity retention of 91.6% under limited Li, high cathode loading and lean electrolyte conditions.     

Small Changes,Big Impact: Tungsten Bronzes with Extremely Large Second Harmonic Generation Achieved by the Transition Metal Doping on the B-Site

Two novel transition metal-doped tungsten bronze oxides, Pb_2.15Li_0.85Nb_4.85Ti_0.15O₁₅ (PLNT) and Pb_2.15Li_0.55Nb_4.85W_0.15O₁₅ (PLNW), are synthesized by high-temperature solid-state reactions. The Rietveld method using the high-resolution synchrotron radiation indicates that PLNT and PLNW crystallize in the orthorhombic polar noncentrosymmetric space group, Pmn2₁ (no. 31). As a class of tungsten bronze oxide, PLNT and PLNW retain a unique rigid framework composed of d⁰ transition metal cation (Ti⁴⁺ or W⁶⁺)-doped highly distorted NbO₆ octahedra along with the subsequently generated Pb/LiO₁₂ and PbO₁₅ polyhedra. Interestingly, the d⁰ transition metal-doped tungsten bronzes, PLNT and PLNW, exhibit extremely large second-harmonic generation (SHG) responses of 56 and 67 × KH₂PO₄, respectively. The observed immeasurably strong SHG is mainly attributed to a net polarization originating from the alignment of highly distorted NbO₆ octahedra with doped transition metals in the frameworks. It is believed that doping transition metal cations at the B-site of the tungsten bronze structures should be an innovative strategy to develop novel high-performance nonlinear optical materials.     

A General Synthesis of Crumpled Metal Oxide Nanosheets as Superior Chemiresistive Sensing Layers

Metal oxide nanosheets having high mesoporosity, grain size distribution of 5–10 nm, and ultrathin thickness have attracted much attention due to their intriguing properties such as high surface‐to‐volume ratio and superior chemical activities. However, 2D nanostructures tend to restack, inducing a decrease in accessible surface area and a number of pores. To solve this problem, herein, a unique synthetic method of crumpled metal oxide nanosheets using spray pyrolysis of metal ion–coated graphene oxide, followed by heat treatment, is reported. This method is applicable not only to single‐component metal oxides but also to heterogeneous multicomponent metal oxides in which composition can be controlled. Crumpled SnO₂, ZnO, and Co₃O₄ as well as SnO₂/ZnO and SnO₂/Co₃O₄ nanosheets with heterogeneous interfaces are successfully synthesized and used as superior gas sensing layers. Because of the abundant reaction sites, well‐developed porosity for high gas accessibility, the formation of heterojunctions, the crumpled SnO₂/ZnO and SnO₂/Co₃O₄ nanosheets exhibit outstanding sensing performance (R_air/R_gas = 20.25 toward 5 ppm formaldehyde, and R_air/R_gas = 14.13 toward 5 ppm acetone, respectively). This study can contribute to the realization of a family of heterogeneous crumpled metal oxide nanosheets that can be applied to various research fields.     

Interconnected Metallic Membrane Enabled by MXene Inks Toward High-Rate Anode and High-Voltage Cathode for Li-Ion Batteries

The ever-increasing popularity of smart electronics demands advanced Li-ion batteries capable of charging faster and storing more energy, which in turn stimulates the innovation of electrode additives. Developing single-phase conductive networks featuring excellent mechanical strength/integrity coupled with efficient electron transport and durability at high-voltage operation should maximize the rate capability and energy density, however, this has proven to be quite challenging. Herein, it is shown that a 2D titanium carbide (known as MXene) metallic membrane can be used as single-phase interconnected conductive binder for commercial Li-ion battery anode (i.e., Li₄Ti₅O₁₂) and high-voltage cathodes (i.e., Ni_0.8Mn_0.1Co_0.1O₂). Electrodes are fabricated directly by slurry-casting of MXene aqueous inks composited with active materials without any other additives or solvents. The interconnected metallic MXene membrane ensures fast charge transport and provides good durability, demonstrating excellent rate performance in the Li//Li₄Ti₅O₁₂ cell (90 mAh g⁻¹ at 45 C) and high reversible capacity (154 mAh g⁻¹ at 0.2 C/0.5 C) in Li//Ni_0.8Mn_0.1Co_0.1O₂ cell coupled with high-voltage operation (4.3 V vs Li/Li⁺). The LTO//NMC full cell demonstrates promising cycling stability, maintaining capacity retention of 101.4% after 200 cycles at 4.25 V (vs Li/Li⁺) operation. This work provides insights into the rational design of binder-free electrodes toward acceptable cyclability and high-power density Li-ion batteries.     

Synergistically Assembled Li2S/FWNTs@Reduced Graphene Oxide Nanobundle Forest for Free‐Standing High‐Performance Li2S Cathodes

Lithium sulfide (Li₂S) has attracted increasing attention as a promising cathode because of its compatibility with more practical lithium‐free anode materials and its high specific capacity. However, it is still a challenge to develop Li₂S cathodes with low electrochemical overpotential, high capacity and reversibility, and good rate performance. This work designs and fabricates a practical Li₂S cathode composed of Li₂S/few‐walled carbon nanotubes@reduced graphene oxide nanobundle forest (Li₂S/FWNTs@rGO NBF). Hierarchical nanostructures are obtained by annealing the Li₂SO₄/FWNTs@GO NBF, which is prepared by a facile and scalable solution‐based self‐assembly method. Systematic characterizations reveal that in this unique NBF nanostructure, FWNTs act as axial shafts to direct the structure, Li₂S serves as the internal active material, and GO sheets provide an external coating to minimize the direct contact of Li₂S with the electrolyte. When used as a cathode, the Li₂S/FWNTs@rGO NBF achieve a high capacity of 868 mAh g^?1_Li2S at 0.2C after 300 cycles and an outstanding rate performance of 433 mAh g^?1_Li2S even at 10C, suggesting that this Li₂S cathode is a promising candidate for ultrafast charge/discharge applications. The design and synthetic strategies outlined here can be readily applied to the processing of other novel functional materials to obtain a much wider range of applications.