In‐Plane Assembled Orthorhombic Nb2O5 Nanorod Films with High‐Rate Li+ Intercalation for High‐Performance Flexible Li‐Ion Capacitors

Organic hybrid supercapacitors that consist of a battery electrode and a capacitive electrode show greatly improved energy density, but their power density is generally limited by the poor rate capability of battery‐type electrodes. In addition, flexible organic hybrid supercapacitors are rarely reported. To address the above issues, herein an in‐plane assembled orthorhombic Nb₂O₅ nanorod film anode with high‐rate Li⁺ intercalation to develop a flexible Li‐ion hybrid capacitor (LIC) is reported. The binder‐/additive‐free film exhibits excellent rate capability (≈73% capacity retention with the rate increased from 0.5 to 20 C) and good cycling stability (>2500 times). Kinetic analyses reveal that the high rate performance is mainly attributed to the excellent in‐plane assembly of interconnected single‐crystalline Nb₂O₅ nanorods on the current collector, ensuring fast electron transport, facile Li‐ion migration in the porous film, and greatly reduced ion‐diffusion length. Using such a Nb₂O₅ film as anode and commercial activated carbon as cathode, a flexible LIC is designed. It delivers both high gravimetric and high volumetric energy/power densities (≈95.55 Wh kg^?1/5350.9 W kg^?1; 6.7 mW h cm^?3/374.63 mW cm^?3), surpassing previous typical Li‐intercalation electrode‐based LICs. Furthermore, this LIC device still keeps good electrochemical attributes even under serious bending states (30°–180°).     

A Low‐Cost,Self‐Standing NiCo2O4@CNT/CNT Multilayer Electrode for Flexible Asymmetric Solid‐State Supercapacitors

The demand for a new generation of flexible, portable, and high‐capacity power sources increases rapidly with the development of advanced wearable electronic devices. Here we report a simple process for large‐scale fabrication of self‐standing composite film electrodes composed of NiCo₂O₄@carbon nanotube (CNT) for supercapacitors. Among all composite electrodes prepared, the one fired in air displays the best electrochemical behavior, achieving a specific capacitance of 1,590 F g^?1 at 0.5 A g^?1 while maintaining excellent stability. The NiCo₂O₄@CNT/CNT film electrodes are fabricated via stacking NiCo₂O₄@CNT and CNT alternately through vacuum filtration. Lightweight, flexible, and self‐standing film electrodes (≈24.3 µm thick) exhibit high volumetric capacitance of 873 F cm^?3 (with an areal mass of 2.5 mg cm^?2) at 0.5 A g^?1. An all‐solid‐state asymmetric supercapacitor consists of a composite film electrode and a treated carbon cloth electrode has not only high energy density (≈27.6 Wh kg^?1) at 0.55 kW kg^?1 (including the weight of the two electrodes) but also excellent cycling stability (retaining ≈95% of the initial capacitance after 5000 cycles), demonstrating the potential for practical application in wearable devices.     

Approaching the Downsizing Limit of Maricite NaFePO4 toward High‐Performance Cathode for Sodium‐Ion Batteries

Maricite NaFePO₄ nanodots with minimized sizes (≈1.6 nm) uniformly embedded in porous N‐doped carbon nanofibers (designated as NaFePO₄@C) are first prepared by electrospinning for maximized Na‐storage performance. The obtained flexible NaFePO₄@C fiber membrane adherent on aluminum foil is directly used as binder‐free cathode for sodium‐ion batteries, revealing that the ultrasmall nanosize effect as well as a high‐potential desodiation process can transform the generally perceived electrochemically inactive maricite NaFePO₄ into a highly active amorphous phase; meanwhile, remarkable electrochemical performance in terms of high reversible capacity (145 mA h g^?1 at 0.2 C), high rate capability (61 mA h g^?1 at 50 C), and unprecedentedly high cyclic stability (≈89% capacity retention over 6300 cycles) is achieved. Furthermore, the soft package Na‐ion full battery constructed by the NaFePO₄@C nanofibers cathode and the pure carbon nanofibers anode displays a promising energy density of 168.1 Wh kg^?1 and a notable capacity retention of 87% after 200 cycles. The distinctive 3D network structure of very fine NaFePO₄ nanoparticles homogeneously encapsulated in interconnected porous N‐doped carbon nanofibers, can effectively improve the active materials' utilization rate, facilitate the electrons/Na⁺ ions transport, and strengthen the electrode stability upon prolonged cycling, leading to the fascinating Na‐storage performance.     

Carbonyl‐β‐Cyclodextrin as a Novel Binder for Sulfur Composite Cathodes in Rechargeable Lithium Batteries

As one of the essential components in electrodes, the binder affects the performance of a rechargeable battery. By modifying β‐cyclodextrin (β‐CD), an appropriate binder for sulfur composite cathodes is identified. Through a partial oxidation reaction in H₂O₂ solution, β‐CD is successfully modified to carbonyl‐β‐cyclodextrin (C‐β‐CD), which exhibits a water solubility ca. 100 times that of β‐CD at room temperature. C‐β‐CD possesses the typical properties of an aqueous binder: strong bonding strength, high solubility in water, moderate viscosity, and wide electrochemical windows. Sulfur composite cathodes with C‐β‐CD as the binder demonstrate a high reversible capacity of 694.2 mA h g_(composite)^?1 and 1542.7 mA h g_(sulfur)^?1, with a sulfur utilization approaching 92.2%. The discharge capacity remains at 1456 mA h g_(sulfur)^?1 after 50 cycles, which is much higher than that of the cathode with unmodified β‐CD as binder. Combined with its low cost and environmental benignity, C‐β‐CD is a promising binder for sulfur cathodes in rechargeable lithium batteries with high electrochemical performance.     

Engineering MoS2 Nanosheets on Spindle‐Like α‐Fe2O3 as High‐Performance Core–Shell Pseudocapacitive Anodes for Fiber‐Shaped Aqueous Lithium‐Ion Capacitors

Fiber‐shaped aqueous lithium‐ion capacitors (FALICs) featured with high energy and power densities together with outstanding safety characteristics are emerging as promising electrochemical energy‐storage devices for future portable and wearable electronics. However, the lack of high‐capacitance fibrous anodes is a major bottleneck to achieve high performance FALICs. Here, hierarchical MoS₂@α‐Fe₂O₃ core–shell heterostructures consisting of spindle‐shaped α‐Fe₂O₃ cores and MoS₂ nanosheet shells on a carbon nanotube fiber (CNTF) are successfully fabricated. Originating from the unique core/shell architecture and prominent synergetic effects for multi‐components, the resulting MoS₂@α‐Fe₂O₃/CNTF anode delivers a remarkable specific capacitance of 2077.5 mF cm^?2 (554.0 F cm^?3) at 2 mA cm^?2, substantially outperforming most of the previously reported fibrous anode materials. Further density functional theory calculations reveal that the MoS₂@α‐Fe₂O₃ nano‐heterostructure possesses better electrical conductivity and stronger adsorption energy of Li⁺ than those of the individual MoS₂ and α‐Fe₂O₃. By paring with the self‐standing LiCoO₂/CNTF battery‐type cathode, a prototype quasi‐solid‐state FALIC with a maximum operating voltage of 2.0 V is constructed, achieving impressive specific capacitance (253.1 mF cm^?2) and admirable energy density (39.6 mWh cm^?3). Additionally, the newly developed FALICs can be woven into the flexible textile to power wearable electronics. This work presents a novel effective strategy to design high‐performance anode materials for next‐generation wearable ALICs.     

A Sieve‐Functional and Uniform‐Porous Kaolin Layer toward Stable Zinc Metal Anode

Zinc metal is considered as one of the best anode choices for rechargeable aqueous Zn‐based batteries due to its high specific capacity, abundance, and safety. However, dendrite and corrosion issues remain a challenge for this system. Herein, sieve‐element function (selective channel of Zn²⁺) and uniform‐pore distribution (≈3.0 nm) of a kaolin‐coated Zn anode (KL‐Zn) is proposed to alleviate these problems. Based on the artificial Zn metal/electrolyte interface, the KL‐Zn anode not only ensures dendrite‐free deposition and long‐time stability (800 h at 1.1 mA h cm^?2), but also retards side reactions. As a consequence, KL‐Zn/MnO₂ batteries can deliver high specific capacity and good capacity retention as well as a reasonably well‐preserved morphology (KL‐Zn) after 600 cycles at 0.5 A g^?1. This work provides a deep step toward high‐performance rechargeable Zn‐based battery system.     

Phthalocyanine‐Based 2D Conjugated Metal‐Organic Framework Nanosheets for High‐Performance Micro‐Supercapacitors

2D conjugated metal‐organic frameworks (2D c‐MOFs) are emerging as a novel class of conductive redox‐active materials for electrochemical energy storage. However, developing 2D c‐MOFs as flexible thin‐film electrodes have been largely limited, due to the lack of capability of solution‐processing and integration into nanodevices arising from the rigid powder samples by solvothermal synthesis. Here, the synthesis of phthalocyanine‐based 2D c‐MOF (Ni₂[CuPc(NH)₈]) nanosheets through ball milling mechanical exfoliation method are reported. The nanosheets feature with average lateral size of ≈160 nm and mean thickness of ≈7 nm (≈10 layers), and exhibit high crystallinity and chemical stability as well as a p‐type semiconducting behavior with mobility of ≈1.5 cm² V^?1 s^?1 at room temperature. Benefiting from the ultrathin feature, the nanosheets allow high utilization of active sites and facile solution‐processability. Thus, micro‐supercapacitor (MSC) devices are fabricated mixing Ni₂[CuPc(NH)₈] nanosheets with exfoliated graphene, which display outstanding cycling stability and a high areal capacitance up to 18.9 mF cm^?2; the performance surpasses most of the reported conducting polymers‐based and 2D materials‐based MSCs.     

Flexible Solid‐State Supercapacitor Based on Graphene‐based Hybrid Films

A flexible solid‐state asymmetric supercapacitor based on bendable film electrodes with 3D expressway‐like architecture of graphenes and “hard nano‐spacer” is fabricated via an extended filtration assisted method. In the designed structure of the positive electrode, graphene sheets are densely packed, and Ni(OH)₂ nanoplates are intercalated in between the densely stacked graphenes. The 3D expressway‐like electrodes exhibit superior supercapacitive performance including high gravimetric capacitance (≈573 F g^‐1), high volumetric capacitance (≈655 F cm^‐3), excellent rate capability, and superior cycling stability. In addition, another hybrid film of graphene and carbon nanotubes (CNT) is fabricated as the negative electrodes for the designed asymmetric device. In the obtained graphene@CNT films, CNTs served as the hard spacer to prevent restacking of graphene sheets but also as a conductive and robust network to facilitate the electrons collection/transport in order to fulfill the demand of high‐rate performance of the asymmetric supercapacitor. Based on these two hybrid electrode films, a solid‐state flexible asymmetric supercapacitor device is assembled, which is able to deliver competitive volumetric capacitance of 58.5 F cm^‐3 and good rate capacity. There is no obvious degradation of the supercapacitor performance when the device is in bending configuration, suggesting the excellent flexibility of the device.     

Single‐Atom Fe‐Nx‐C as an Efficient Electrocatalyst for Zinc–Air Batteries

Highly efficient non‐noble metal electrocatalysts are vital for metal–air batteries and fuel cells. Herein, a noble‐metal–free single‐atom Fe‐N _x‐C electrocatalyst is synthesized by incorporating Fe‐Phen complexes into the nanocages in situ during the growth of ZIF‐8, followed by pyrolysis at 900 °C under inert atmosphere. Fe‐Phen species provide both Fe²⁺ and the organic ligand (Phen) simultaneously, which play significant roles in preparing single‐atom catalysts. The obtained Fe‐N_x‐C exhibits a half‐wave potential of 0.91 V for the oxygen reduction reaction, higher than that of commercial Pt/C (0.82 V). As a cathode catalyst for primary zinc–air batteries (ZABs), the battery shows excellent electrochemical performances in terms of the high open‐circuit voltage (OCV) of 1.51 V and a high power density of 96.4 mW cm^?2. The rechargeable ZAB with Fe‐N_x‐C catalyst and the alkaline electrolyte shows a remarkable cycling performance for 300 h with an initial round‐trip efficiency of 59.6%. Furthermore, the rechargeable all‐solid‐state ZABs with the Fe‐N_x‐C catalyst show high OCV of 1.49 V, long cycle life for 120 h, and foldability. The single‐atom Fe‐N_x‐C electrocatalyst may function as a promising catalyst for various metal–air batteries and fuel cells.     

A Self‐Branched Lamination of Hierarchical Patronite Nanoarchitectures on Carbon Fiber Cloth as Novel Electrode for Ionic Liquid Electrolyte‐Based High Energy Density Supercapacitors

The developments of rationally designed binder‐free metal chalcogenides decorated flexible electrodes are of paramount importance for advanced energy storage devices. Herein, binder‐free patronite (VS₄) flower‐like nanostructures are facilely fabricated on a carbon cloth (CC) using a facile hydrothermal method for high‐performance supercapacitors. The growth density and morphology of VS₄ nanostructures on CC are also controlled by varying the concentrations of vanadium and sulfur sources along with the complexing agent in the growth solution. The optimal electrode with an appropriate growth concentration (VS₄‐CC@VS‐3) demonstrates a considerable pseudocapacitance performance in the ionic liquid (IL) electrolyte (1‐ethyl‐3‐methylimidazolium trifluoromethanesulfonate), with a high operating potential of 2 V. Utilizing VS₄‐CC@VS‐3 as both positive and negative electrodes, the IL‐based symmetric supercapacitor is assembled, which demonstrates a high areal capacitance of 536 mF cm^?2 (206 F g^?1) and excellent cycling durability (93%) with superior energy and power densities of 74.4 µWh cm^?2 (28.6 Wh kg^?1) and 10154 µW cm^?2 (9340 W kg^?1), respectively. As for the high energy storage performance, the device stably energizes various portable electronic applications for a long time, which make the fabricated composite material open up news for the fabrication of fabrics supported binder‐free chalcogenides for high‐performance energy storage devices.     

2D Nitrogen‐Doped Carbon Nanotubes/Graphene Hybrid as Bifunctional Oxygen Electrocatalyst for Long‐Life Rechargeable Zn–Air Batteries

The rational construction of efficient bifunctional oxygen electrocatalysts is of immense significance yet challenging for rechargeable metal–air batteries. Herein, this work reports a metal–organic framework derived 2D nitrogen‐doped carbon nanotubes/graphene hybrid as the efficient bifunctional oxygen electrocatalyst for rechargeable zinc–air batteries. The as‐obtained hybrid exhibits excellent catalytic activity and durability for the oxygen electrochemical reactions due to the synergistic effect by the hierarchical structure and heteroatom doping. The assembled rechargeable zinc–air battery achieves a high power density of 253 mW cm^?2 and specific capacity of 801 mAh g_Zn^?1 with excellent cycle stability of over 3000 h at 5 mA cm^?2. Moreover, the flexible solid‐state rechargeable zinc–air batteries assembled by this hybrid oxygen electrocatalyst exhibits a high discharge power density of 223 mW cm^?2, which can power 45 light‐emitting diodes and charge a cellphone. This work provides valuable insights in designing efficient bifunctional oxygen electrocatalysts for long‐life metal–air batteries and related energy conversion technologies.     

High‐Performance Ultrathin Flexible Solid‐State Supercapacitors Based on Solution Processable Mo1.33C MXene and PEDOT:PSS

MXenes, a young family of 2D transition metal carbides/nitrides, show great potential in electrochemical energy storage applications. Herein, a high performance ultrathin flexible solid‐state supercapacitor is demonstrated based on a Mo_1.33C MXene with vacancy ordering in an aligned layer structure MXene/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonic acid) (PEDOT:PSS) composite film posttreated with concentrated H₂SO₄. The flexible solid‐state supercapacitor delivers a maximum capacitance of 568 F cm^?3, an ultrahigh energy density of 33.2 mWh cm^?3 and a power density of 19 470 mW cm^?3. The Mo_1.33C MXene/PEDOT:PSS composite film shows a reduction in resistance upon H₂SO₄ treatment, a higher capacitance (1310 F cm^?3) and improved rate capabilities than both pristine Mo_1.33C MXene and the nontreated Mo_1.33C/PEDOT:PSS composite films. The enhanced capacitance and stability are attributed to the synergistic effect of increased interlayer spacing between Mo_1.33C MXene layers due to insertion of conductive PEDOT, and surface redox processes of the PEDOT and the MXene.     

Integrated Hierarchical Carbon Flake Arrays with Hollow P‐Doped CoSe2 Nanoclusters as an Advanced Bifunctional Catalyst for Zn–Air Batteries

Hierarchical nanostructured architectures are demonstrated as an effective approach to develop highly active and bifunctional electrocatalysts, which are urgently required for efficient rechargeable metal–air batteries. Herein, a mesoporous hierarchical flake arrays (FAs) structure grown on flexible carbon cloth, integrated with the microsized nitrogen‐doped carbon (N‐doped C) FAs, nanoscaled P‐doped CoSe₂ hollow clusters and atomic‐level P‐doping (P‐CoSe₂/N‐C FAs) is described. The P‐CoSe₂/N‐C FAs thus developed exhibit a reduced overpotential (≈230 mV at 10 mA cm^?2) toward oxygen evolution reaction (OER) and large half‐wave potential (0.87 V) for oxygen reduction reactions. The excellent bifunctional electrocatalytic performance is ascribed to the synergy among the hierarchical flake arrays controlled at both micro‐ and nanoscales, and atomic‐level P‐doping. Density functional theory calculations confirm that the free energy for the potential‐limiting step is reduced by P‐doping for OER. An all‐solid‐state zinc–air battery made of the P‐CoSe₂/N‐C FAs as the air‐cathode presents excellent cycling stability and mechanical flexibility, demonstrating the great potential of the hierarchical P‐CoSe₂/N‐C FAs for advanced bifunctional electrocatalysis.     

Bio‐Inspired Nanospiky Metal Particles Enable Thin,Flexible, and Thermo‐Responsive Polymer Nanocomposites for Thermal Regulation

Safety issues remain a major obstacle toward large‐scale applications of high‐energy lithium‐ion batteries. Embedding thermo‐responsive polymer switching materials (TRPS) into batteries is a potential strategy to prevent thermal runaway, which is a major cause of battery failures. Here, thin, flexible, highly responsive polymer nanocomposites enabled by bio‐inspired nanospiky metal (Ni) particles are reported. These unique Ni particles are synthesized by a simple aqueous reaction at gram‐scale with controlled surface morphology and composition to optimize electrical properties of the nanocomposites. The Ni particles provide TRPS films with a high room‐temperature conductivity of up to 300 S cm^?1. Such TRPS composite films also have a high rate (<1 s) of resistance switching within a narrow temperature range, good reversibility upon on/off switching, and a tunable switching temperature (T_s; 75 to 170 °C) that can be achieved by tailing their compositions. The small size (≈500 nm) of Ni particles enables ready fabrication of thin and flexible TPRS films with thickness approaching 5 µm or less. These features suggest the great potential of using this new type of responsive polymer composite for more effective battery thermal regulation without sacrificing cell performance.     

Nickel@Nickel Oxide Core–Shell Electrode with Significantly Boosted Reactivity for Ultrahigh‐Energy and Stable Aqueous Ni–Zn Battery

The main bottlenecks of aqueous rechargeable Ni–Zn batteries are their relatively low energy density and poor cycling stability, mainly arising from the low capacity and inferior reversibility of the current Ni‐based cathodes. Additionally, the complicated and difficult‐to‐scale preparation procedures of these cathodes are not promising for large‐scale energy storage. Here, a facile and cost‐effective ultrasonic‐assisted strategy is developed to efficiently activate commercial Ni foam as a robust cathode for a high‐energy and stable aqueous rechargeable Ni–Zn battery. 3D Ni@NiO core–shell electrode with remarkably boosted reactivity and an area of 300 cm² is readily obtained by this ultrasonic‐assisted activation method (denoted as SANF). Benefiting from the in situ formation of electrochemically active NiO and porous 3D structure with a large surface area, the as‐fabricated SANF//Zn battery presents ultrahigh capacity (0.422 mA h cm^?2) and excellent cycling durability (92.5% after 1800 cycles). Moreover, this aqueous rechargeable SANF//Zn battery achieves an impressive energy density of 15.1 mW h cm^?3 (0.754 mW h cm^?2) and a peak power density of 1392 mW cm^?3, outperforming most reported aqueous rechargeable energy‐storage devices. These findings may provide valuable insights into designing large‐scale and high‐performance 3D electrodes for aqueous rechargeable batteries.     

Hierarchical Design for Fabricating Cost‐Effective High Performance Supercapacitors

The salient feature of a supercapacitor is its ability to deliver much higher power density than a battery. A hierarchical design and a cost‐effective approach to fabricate high performance supercapacitors using functional carbon nano‐particles is reported. A special arc synthesis method is used to produce amorphous/crystalline composite with nitrogen and boron co‐doped high charge density carbon nanoparticles. Upon etch removal of the amorphous phase in the composite nanoparticle, a crystalline carbon framework emerges, consisting of a mixture of nano‐graphitic sheets mostly in the middle and single nanohorns distributed around the surface of the nanoparticle. These nanoparticles have large internal/external surfaces with subnano channels and sharp nano‐tips for high speed charge transport and local charge accumulation. To deliver high power density, the internal resistance of the device is reduced by assembling the nanoparticles via electro‐spraying and compacting them into dense films (without any binder) under 700 MPa of pressure before supercapacitor assembly. Taken together, the hierarchical processed supercapacitor has a very high (compared to literature values) power density of nearly 4.5 kW cm^?3 and a respectable energy density of 2.45 mWh cm^?3. Combining these carbon nanoparticles with large area spraying coating, it can lead to a cost‐effective production of high performance supercapacitors.     

Finely Crafted 3D Electrodes for Dendrite‐Free and High‐Performance Flexible Fiber‐Shaped Zn–Co Batteries

Rechargeable aqueous Zn‐based batteries, benefiting from their good reliability, low cost, high energy/power densities, and ecofriendliness, show great potential in energy storage systems. However, the poor cycling performance due to the formation of Zn dendrites greatly hinders their practical applications. In this work, a trilayer 3D CC‐ZnO@C‐Zn anode is obtained by in situ growing ZIFs (zeolitic‐imidazolate frameworks) derived ZnO@C core–shell nanorods on carbon cloth followed by Zn deposition, which exhibits excellent antidendrite performance. Using CC‐ZnO@C‐Zn as the anode and a branch‐like Co(CO₃)_0.5(OH)_x·0.11H₂O@CoMoO₄ (CC‐CCH@CMO) as the cathode, a Zn–Co battery is rationally designed, displaying excellent energy/power densities (235 Wh kg^?1, 12.6 kW kg^?1) and remarkable cycling performance (71.1% after 5000 cycles). Impressively, when using a gel electrolyte, a highly customizable, fiber‐shaped flexible all‐solid‐state Zn–Co battery is assembled for the first time, which presents a high energy density of 4.6 mWh cm^?3, peak power density of 0.42 W cm^?3, and long durability (82% capacity retention after 1600 cycles) as well as excellent flexibility. The unique 3D electrode design in this study provides a novel approach to achieve high‐performance Zn‐based batteries, showing promising applications in flexible and portable energy‐storage systems.     

Scalable Production of Graphene Inks via Wet‐Jet Milling Exfoliation for Screen‐Printed Micro‐Supercapacitors

The miniaturization of energy storage units is pivotal for the development of next‐generation portable electronic devices. Micro‐supercapacitors (MSCs) hold great potential to work as on‐chip micro‐power sources and energy storage units complementing batteries and energy harvester systems. Scalable production of supercapacitor materials with cost‐effective and high‐throughput processing methods is crucial for the widespread application of MSCs. Here, wet‐jet milling exfoliation of graphite is reported to scale up the production of graphene as a supercapacitor material. The formulation of aqueous/alcohol‐based graphene inks allows metal‐free, flexible MSCs to be screen‐printed. These MSCs exhibit areal capacitance (C_areal) values up to 1.324 mF cm^?2 (5.296 mF cm^?2 for a single electrode), corresponding to an outstanding volumetric capacitance (C_vol) of 0.490 F cm^?3 (1.961 F cm^?3 for a single electrode). The screen‐printed MSCs can operate up to a power density above 20 mW cm^?2 at an energy density of 0.064 µWh cm^?2. The devices exhibit excellent cycling stability over charge–discharge cycling (10 000 cycles), bending cycling (100 cycles at a bending radius of 1 cm) and folding (up to angles of 180°). Moreover, ethylene vinyl acetate‐encapsulated MSCs retain their electrochemical properties after a home‐laundry cycle, providing waterproof and washable properties for prospective application in wearable electronics.     

An All‐Ceramic Solid‐State Rechargeable Na+‐Battery Operated at Intermediate Temperatures

A major challenge to the development of the next‐generation all‐solid‐state rechargeable battery technology is the inferior performance caused by insufficient ionic conductivity in the electrolyte and poor mixed ionic‐electronic conductivity in the electrodes. Here we demonstrate the utility of elevated temperature as an advantageous means of enhancing the conductivity in the electrolyte and promoting the catalytic activity at electrodes in an all‐ceramic rechargeable Na⁺‐battery. The new Na⁺‐battery consists of a 154‐μm thick Na‐β′′‐Al₂O₃ electrolyte membrane, a 22‐μm thick P₂‐Na_2/3[Fe_1/2Mn_1/2]O₂ cathode and 52‐μm thick Na₂Ti₃O₇‐La_0.8Sr_0.2MnO₃ composite anode. The battery is shown to be capable of producing a reversible and stable capacity of 152 mAhg^?1 at 350 °C. While the battery's achievable capacity is limited by the electrode materials employed, it does exhibit unique low self‐discharge rate, high tolerance to thermal cycling and an outstanding safety feature.     

Uniformly Confined Germanium Quantum Dots in 3D Ordered Porous Carbon Framework for High‐Performance Li‐ion Battery

Although abundant germanium (Ge)‐based anode materials have been explored to obtain high specific capacity, high rate performance, and long charge/discharge lifespans for lithium‐ion batteries (LIBs), their performances are still far from satisfactory due to the intrinsic defects of Ge and the relatively intricate anode structure. To work out these issues, a 3D ordered porous N‐doped carbon framework with Ge quantum dots uniformly embedded (3DOP Ge@N? C) as a binder‐free anode for LIBs via a facile polystyrene colloidal nanospheres template‐confined strategy is proposed. This unique structure not only facilitates Li‐ion diffusion and electron transport that can guarantee rapid de/alloying reaction, but also alleviates the huge volume changes during reactions and improves cycling stability. Notably, the resulting anode delivers a high specific reversible capacity (≈1160 mA h g^?1 at 1 A g^?1), superior rate properties (exceeding 500 mA h g^?1 at 40 A g^?1), and excellent cycling stability (over 90% capacity retention after 1200 cycles even at 5 A g^?1). Furthermore, both the 3DOP Ge@N? C anode with high areal mass loading (up to 8 mg cm^?2) and the full cell coupled with LiFePO₄ cathode display high capacity and cycling stability, further indicative of the favorable real‐life application prospects for high‐energy LIBs.