Novel Core–Shell FeOF/Ni(OH)2 Hierarchical Nanostructure for All‐Solid‐State Flexible Supercapacitors with Enhanced Performance

Well‐controlled core–shell hierarchical nanostructures based on oxyfluoride and hydroxide are for the first time rationally designed and synthesized via a simple solvothermal and chemical precipitation route, in which FeOF nanorod acts as core and porous Ni(OH)₂ nanosheets as shell. When evaluated as electrodes for supercapacitors, a high specific capacitance of 1452 F g^?1 can be obtained at a current density of 1 A g^?1. Even as the current density increases to 10 A g^?1, the core–shell hybrid still reserves a noticeable capacitance of 1060 F g^?1, showing an excellent rate capacity. Furthermore, all‐solid‐state flexible asymmetric supercapacitor based on the FeOF/Ni(OH)₂ hybrid as a positive electrode and activated carbon as a negative electrode shows high power density, high energy density, and long cycling lifespan. The excellent electrochemical performance of the FeOF/Ni(OH)₂ core–shell hybrid is ascribed to the unique microstructure and synergistic effects. FeOF nanorod from FeF₃ by partial substitution of fluorine with oxygen behaves as a low intrinsic resistance, thus facilitating charge transfer processes. While the hierarchical Ni(OH)₂ nanosheets with large surface area provide enough active sites for redox chemical reactions, leading to greatly enhanced electrochemical activity. The well‐controllable oxyfluoride/hydroxide hybrid is inspiring, opening up a new way to design new electrodes for next‐generation all‐solid‐state supercapacitors.     

A High Energy Density Asymmetric Supercapacitor from Nano‐architectured Ni(OH)2/Carbon Nanotube Electrodes

The demand for advanced energy storage devices such as supercapacitors and lithium‐ion batteries has been increasing to meet the application requirements of hybrid vehicles and renewable energy systems. A major limitation of state‐of‐art supercapacitors lies in their relatively low energy density compared with lithium batteries although they have superior power density and cycle life. Here, we report an additive‐free, nano‐architectured nickel hydroxide/carbon nanotube (Ni(OH)₂/CNT) electrode for high energy density supercapacitors prepared by a facile two‐step fabrication method. This Ni(OH)₂/CNT electrode consists of a thick layer of conformable Ni(OH)₂ nano‐flakes on CNT bundles directly grown on Ni foams (NFs) with a very high areal mass loading of 4.85 mg cm^?2 for Ni(OH)₂. Our Ni(OH)₂/CNT/NF electrode demonstrates the highest specific capacitance of 3300 F g^?1 and highest areal capacitance of 16 F cm^?2, to the best of our knowledge. An asymmetric supercapacitor using the Ni(OH)₂/CNT/NF electrode as the anode assembled with an activated carbon (AC) cathode can achieve a high cell voltage of 1.8 V and an energy density up to 50.6 Wh/kg, over 10 times higher than that of traditional electrochemical double‐layer capacitors (EDLCs).     

Ultrathin Mesoporous NiCo2O4 Nanosheets Supported on Ni Foam as Advanced Electrodes for Supercapacitors

A facile two‐step method is developed for large‐scale growth of ultrathin mesoporous nickel cobaltite (NiCo₂O₄) nanosheets on conductive nickel foam with robust adhesion as a high‐performance electrode for electrochemical capacitors. The synthesis involves the co‐electrodeposition of a bimetallic (Ni, Co) hydroxide precursor on a Ni foam support and subsequent thermal transformation to spinel mesoporous NiCo₂O₄. The as‐prepared ultrathin NiCo₂O₄ nanosheets with the thickness of a few nanometers possess many interparticle mesopores with a size range from 2 to 5 nm. The nickel foam supported ultrathin mesoporous NiCo₂O₄ nanosheets promise fast electron and ion transport, large electroactive surface area, and excellent structural stability. As a result, superior pseudocapacitive performance is achieved with an ultrahigh specific capacitance of 1450 F g^?1, even at a very high current density of 20 A g^?1, and excellent cycling performance at high rates, suggesting its promising application as an efficient electrode for electrochemical capacitors.     

Advanced Asymmetric Supercapacitors Based on Ni(OH)2/Graphene and Porous Graphene Electrodes with High Energy Density

Hierarchical flowerlike nickel hydroxide decorated on graphene sheets has been prepared by a facile and cost‐effective microwave‐assisted method. In order to achieve high energy and power densities, a high‐voltage asymmetric supercapacitor is successfully fabricated using Ni(OH)₂/graphene and porous graphene as the positive and negative electrodes, respectively. Because of their unique structure, both of these materials exhibit excellent electrochemical performances. The optimized asymmetric supercapacitor could be cycled reversibly in the high‐voltage region of 0–1.6 V and displays intriguing performances with a maximum specific capacitance of 218.4 F g^?1 and high energy density of 77.8 Wh kg^?1. Furthermore, the Ni(OH)₂/graphene//porous graphene supercapacitor device exhibits an excellent long cycle life along with 94.3% specific capacitance retained after 3000 cycles. These fascinating performances can be attributed to the high capacitance and the positive synergistic effects of the two electrodes. The impressive results presented here may pave the way for promising applications in high energy density storage systems.     

Nickel–Cobalt Layered Double Hydroxide Nanosheets for High‐performance Supercapacitor Electrode Materials

A facile and novel one‐step method of growing nickel‐cobalt layered double hydroxide (Ni‐Co LDH) hybrid films with ultrathin nanosheets and porous nanostructures on nickel foam is presented using cetyltrimethylammonium bromide as nanostructure growth assisting agent but without any adscititious alkali sources and oxidants. As pseudocapacitors, the as‐obtained Ni‐Co LDH hybrid film‐based electrodes display a significantly enhanced specific capacitance (2682 F g^?1 at 3 A g^?1, based on active materials) and energy density (77.3 Wh kg^?1 at 623 W kg^?1), compared to most previously reported electrodes based on nickel‐cobalt oxides/hydroxides. Moreover, the asymmetric supercapacitor, with the Ni‐Co LDH hybrid film as the positive electrode material and porous freeze‐dried reduced graphene oxide (RGO) as the negative electrode material, exhibits an ultrahigh energy density (188 Wh kg^?1) at an average power density of 1499 W kg^?1 based on the mass of active material, which greatly exceeds the energy densities of most previously reported nickel or cobalt oxide/hydroxide‐based asymmetric supercapacitors.     

Layered Silicon‐Based Nanosheets as Electrode for 4 V High‐Performance Supercapacitor

Silicon‐based materials have shown great potential and been widely studied in various fields. Unlike its unparalleled theoretical capacity as anodes for batteries, few investigations have been reported on silicon‐based materials for applications in supercapacitors. Here, an electrode composed of layered silicon‐based nanosheets, obtained through oxidation and exfoliation, for a supercapacitor operated up to 4 V is reported. These silicon‐based nanosheets show an areal specific capacitance of 4.43 mF cm^?2 at 10 mV s^?1 while still retaining a specific capacitance of 834 µF cm^?2 even at an ultrahigh scan rate of 50 000 mV s^?1. The volumetric energy and power density of the supercapacitor are 7.65 mWh cm^?3 and 9312 mW cm^?3, respectively, and the electrode can operate for 12000 cycles in a potential window of 4 V at 2 A g^?1, while retaining 90.6% capacitance. These results indicate that the silicon‐based nanosheets can be a competitive candidate as the supercapacitor electrode material.     

Design of Hierarchical Ni?Co@Ni?Co Layered Double Hydroxide Core–Shell Structured Nanotube Array for High‐Performance Flexible All‐Solid‐State Battery‐Type Supercapacitors

A novel hierarchical nanotube array (NTA) with a massive layered top and discretely separated nanotubes in a core–shell structure, that is, nickel–cobalt metallic core and nickel–cobalt layered double hydroxide shell (Ni? Co@Ni? Co LDH), is grown on carbon fiber cloth (CFC) by template‐assisted electrodeposition for high‐performance supercapacitor application. The synthesized Ni? Co@Ni? Co LDH NTAs/CFC shows high capacitance of 2200 F g^?1 at a current density of 5 A g^?1, while 98.8% of its initial capacitance is retained after 5000 cycles. When the current density is increased from 1 to 20 A g^?1, the capacitance loss is less than 20%, demonstrating excellent rate capability. A highly flexible all‐solid‐state battery‐type supercapacitor is successfully fabricated with Ni? Co LDH NTAs/CFC as the positive electrode and electrospun carbon fibers/CFC as the negative electrode, showing a maximum specific capacitance of 319 F g^?1, a high energy density of 100 W h kg^?1 at 1.5 kW kg^?1, and good cycling stability (98.6% after 3000 cycles). These fascinating electrochemical properties are resulted from the novel structure of electrode materials and synergistic contributions from the two electrodes, showing great potential for energy storage applications.     

Design of Hierarchical NiCo@NiCo Layered Double Hydroxide Core–Shell Structured Nanotube Array for High‐Performance Flexible All‐Solid‐State Battery‐Type Supercapacitors

A novel hierarchical nanotube array (NTA) with a massive layered top and discretely separated nanotubes in a core–shell structure, that is, nickel–cobalt metallic core and nickel–cobalt layered double hydroxide shell (Ni?Co@Ni?Co LDH), is grown on carbon fiber cloth (CFC) by template‐assisted electrodeposition for high‐performance supercapacitor application. The synthesized Ni?Co@Ni?Co LDH NTAs/CFC shows high capacitance of 2200 F g^?1 at a current density of 5 A g^?1, while 98.8% of its initial capacitance is retained after 5000 cycles. When the current density is increased from 1 to 20 A g^?1, the capacitance loss is less than 20%, demonstrating excellent rate capability. A highly flexible all‐solid‐state battery‐type supercapacitor is successfully fabricated with Ni?Co LDH NTAs/CFC as the positive electrode and electrospun carbon fibers/CFC as the negative electrode, showing a maximum specific capacitance of 319 F g^?1, a high energy density of 100 W h kg^?1 at 1.5 kW kg^?1, and good cycling stability (98.6% after 3000 cycles). These fascinating electrochemical properties are resulted from the novel structure of electrode materials and synergistic contributions from the two electrodes, showing great potential for energy storage applications.     

Molecular Design of Mesoporous NiCo2O4 and NiCo2S4 with Sub‐Micrometer‐Polyhedron Architectures for Efficient Pseudocapacitive Energy Storage

Spinel‐type NiCo₂O₄ (NCO) and NiCo₂S₄ (NCS) polyhedron architectures with sizes of 500–600 nm and rich mesopores with diameters of 1–2 nm are prepared facilely by the molecular design of Ni and Co into polyhedron‐shaped zeolitic imidazolate frameworks as solid precursors. Both as‐prepared NCO and NCS nanostructures exhibit excellent pseudocapacitance and stability as electrodes in supercapacitors. In particular, the exchange of O^2? in the lattice of NCO with S^2? obviously improves the electrochemical performance. NCS shows a highly attractive capacitance of 1296 F g^?1 at a current density of 1 A g^?1, ultrahigh rate capability with 93.2% capacitance retention at 10 A g^?1, and excellent cycling stability with a capacitance retention of 94.5% after cycling at 1 A g^?1 for 6000 times. The asymmetric supercapacitor with an NCS negative electrode and an active carbon positive electrode delivers a very attractive energy density of 44.8 Wh kg^?1 at power density 794.5 W kg^?1, and a favorable energy density of 37.7 Wh kg^?1 is still achieved at a high power density of 7981.1 W kg^?1. The specific mesoporous polyhedron architecture contributes significantly to the outstanding electrochemical performances of both NCO and NCS for capacitive energy storage.     

Self-Supported Ni<Subscript>0.85</Subscript>Se Nanosheets Array on Carbon Fiber Cloth for a High-Performance Asymmetric Supercapacitor

In this work, Ni_0.85Se nanosheets array electrode material was prepared with carbon fiber cloth (CFC) as a substrate. Owing to their special structure, the Ni_0.85Se nanosheets array exhibits an outstanding energy storage property with a superior specific capacitance (820 F/g) and great rate capability (83.17%). Moreover, the Ni_0.85Se electrode presents an great cycling performance with 82.63% retention after 10,000 cycles. The asymmetric supercapacitor (ASC) was fabricated based on Ni_0.85Se positive and activated carbon (AC) negative electrode materials, with KOH/PVA gel as the electrolyte, respectively. A highest energy density of 29 W h kg^?1 was achieved at a power density of 779 W kg^?1 under the optimal potential range of 1.6 V. Furthermore, the Ni_0.85Se//AC ASC devices demonstrate a great cycling performance of 81.25% capacitance retention after 5000 charge–discharge cycles. These excellent performance provide strong evidence to confirm the conclusion that Ni_0.85Se nanosheets array used as electrode materials in supercapacitors and Ni_0.85Se//AC asymmetric supercapacitors hold significant potential in the field of energy storage.     

Shape‐Assisted 2D MOF/Graphene Derived Hybrids as Exceptional Lithium‐Ion Battery Electrodes

Herein, a novel polymer‐templated strategy is described to obtain 2D nickel‐based MOF nanosheets using Ni(OH)₂, squaric acid, and polyvinylpyrrolidone (PVP), where PVP has a dual role as a structure‐directing agent, as well as preventing agglomeration of the MOF nanosheets. Furthermore, a scalable method is developed to transform the 2D MOF sheets to Ni₇S₆/graphene nanosheet (GNS) heterobilayers by in situ sulfidation using thiourea as a sulfur source. The Ni₇S₆/GNS composite shows an excellent reversible capacity of 1010 mAh g^?1 at 0.12 A g^?1 with a Coulombic efficiency of 98% capacity retention. The electrochemical performance of the Ni₇S₆/GNS composite is superior not only to nickel sulfide/graphene‐based composites but also to other metal disulfide–based composite electrodes. Moreover, the Ni₇S₆/GNS anode exhibits excellent cycle stability (≈95% capacity retention after 2000 cycles). This outstanding electrochemical performance can be attributed to the synergistic effects of Ni₇S₆ and GNS, where GNS serves as a conducting matrix to support Ni₇S₆ nanosheets while Ni₇S₆ prevents restacking of GNS. This work opens up new opportunities in the design of novel functional heterostructures by hybridizing 2D MOF nanosheets with other 2D nanomaterials for electrochemical energy storage/conversion applications.     

Ternary Hybrids of Amorphous Nickel Hydroxide–Carbon Nanotube‐Conducting Polymer for Supercapacitors with High Energy Density,Excellent Rate Capability,and Long Cycle Life

The utilization of Ni(OH)₂ as a pseudocapacitive material for high performance supercapacitors is hindered by its low electrical conductivity and short cycle life. A coaxial ternary hybrid material comprising of amorphous Ni(OH)₂ deposited on multiwalled carbon nanotubes wrapped with conductive polymer (poly (3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate)) is demonstrated. A thin layer of disordered amorphous Ni(OH)₂ is deposited by an effective “coordinating etching and precipitating” method, resulting in an ultrahigh specific capacitance of 3262 F g^?1 at 5 mV s^?1 and excellent rate capability (71.9% capacitance retention at 100 mV s^?1). More importantly, the polymer layer prevents the degradation of the nanostructure and dis­solution of Ni ion during repeated charge–discharge cycling for 30 000 cycles, a phenomenon which often plagues Ni(OH)₂ nanomaterials. Using the ternary Ni(OH)₂ hybrid and the reduced graphene oxide/carbon nanotube hybrid as the positive and negative electrodes, respectively, the assembled asymmetric supercapacitors exhibit high energy density of 58.5 W h kg^?1 at the power density of 780 W kg^?1 as well as long cycle life (86% capacitance retention after 30 000 cycles). The ternary hybrid architecture design for amorphous Ni(OH)₂ can be regarded as a general approach to obtain pseudocapacitive materials for supercapacitors with both high energy density, excellent rate capability, and long cycle life.     

Ultrasensitive Detection of a Variety of Analytical Targets Based on a Functionalized Low‐Resistance AuNPs/β‐Ni(OH)2 Nanosheets/Ni Foam Sensing Platform

Simple, low‐cost and yet accurate, sensitive, and quantitative detection of a broad range of analytical targets by means of small footprint sensing devices has the potential to revolutionize medical diagnostics, food safety, and environmental monitoring. This work demonstrates a functional nucleic acids (FNAs) tethered AuNPs/β‐Ni(OH)₂ nanosheets (NS)/Ni foam nanocomposite as a miniaturized electrode. Through the rational design of a low‐barrier ohmic contact of AuNPs to β‐Ni(OH)₂ NS and a target mediated nanochannel electron transfer effect, a variety of analytical targets, ranging from a disease marker (thrombin, 16.3 × 10^?12 m detection limit) to an important biological cofactor (adenosine, 3.2 × 10^?12 m detection limit), and to a toxic metal ion (Hg²⁺, 3.1 × 10^?12 m detection limit), are detected with ultrasensitivity. The presence of target triggers the conformational change of FNAs, introducing strong steric hindrance and electrostatic repulsion to the diffusion of electron indicators toward the electrode surface, ultimately leading to the changes in impedance. A novel equivalent circuit considering the capacitive reactance is proposed to describe the 2D NS‐based impedance DNA bioelectrode. This sensing platform is easily applicable to the detection of many other targets in diverse sample matrices through the use of other suitable FNAs materials.     

Hierarchical Composite Electrodes of Nickel Oxide Nanoflake 3D Graphene for High‐Performance Pseudocapacitors

NiO nanoflakes are created with a simple hydrothermal method on 3D (three‐dimensional) graphene scaffolds grown on Ni foams by microwave plasma enhanced chemical vapor deposition (MPCVD). Such as‐grown NiO‐3D graphene hierarchical composites are then applied as monolithic electrodes for a pseudo‐supercapacitor application without needing binders or metal‐based current collectors. Electrochemical measurements impart that the hierarchical NiO‐3D graphene composite delivers a high specific capacitance of ≈1829 F g^?1 at a current density of 3 A g^?1 (the theoretical capacitance of NiO is 2584 F g^?1). Furthermore, a full‐cell is realized with an energy density of 138 Wh kg^?1 at a power density of 5.25 kW kg^?1, which is much superior to commercial ones as well as reported devices in asymmetric capacitors of NiO. More attractively, this asymmetric supercapacitor exhibits capacitance retention of 85% after 5000 cycles relative to the initial value of the 1^st cycle.     

Hierarchical NiMoS and NiFeS Nanosheets with Ultrahigh Energy Density for Flexible All Solid‐State Supercapacitors

Highly flexible supercapacitors (SCs) have great potential in modern electronics such as wearable and portable devices. However, ultralow specific capacity and low operating potential window limit their practical applications. Herein, a new strategy for the fabrication of free‐standing Ni?Mo?S and Ni?Fe?S nanosheets (NSs) for high‐performance flexible asymmetric SC (ASC) through hydrothermal and subsequent sulfurization technique is reported. The effect of Ni²⁺ is optimized to attain hierarchical Ni?Mo?S and Ni?Fe?S NS architectures with high electrical conductivity, large surface area, and exclusive porous networks. Electrochemical properties of Ni?Mo?S and Ni?Fe?S NS electrodes exhibit that both have ultrahigh specific capacities (≈312 and 246 mAh g^?1 at 1 mA cm^?2), exceptional rate capabilities (78.85% and 78.46% capacity retention even at 50 mA cm^?2, respectively), and superior cycling stabilities. Most importantly, a flexible Ni?Mo?S NS//Ni?Fe?S NS ASC delivers a high volumetric capacity of ≈1.9 mAh cm^?3, excellent energy density of ≈82.13 Wh kg^?1 at 0.561 kW kg^?1, exceptional power density (≈13.103 kW kg^?1 at 61.51 Wh kg^?1) and an outstanding cycling stability, retaining ≈95.86% of initial capacity after 10 000 cycles. This study emphasizes the potential importance of compositional tunability of the NS architecture as a novel strategy for enhancing the charge storage properties of active electrodes.     

Hierarchical Ni?Mo?S and Ni?Fe?S Nanosheets with Ultrahigh Energy Density for Flexible All Solid‐State Supercapacitors

Highly flexible supercapacitors (SCs) have great potential in modern electronics such as wearable and portable devices. However, ultralow specific capacity and low operating potential window limit their practical applications. Herein, a new strategy for the fabrication of free‐standing Ni? Mo? S and Ni? Fe? S nanosheets (NSs) for high‐performance flexible asymmetric SC (ASC) through hydrothermal and subsequent sulfurization technique is reported. The effect of Ni²⁺ is optimized to attain hierarchical Ni? Mo? S and Ni? Fe? S NS architectures with high electrical conductivity, large surface area, and exclusive porous networks. Electrochemical properties of Ni? Mo? S and Ni? Fe? S NS electrodes exhibit that both have ultrahigh specific capacities (≈312 and 246 mAh g^?1 at 1 mA cm^?2), exceptional rate capabilities (78.85% and 78.46% capacity retention even at 50 mA cm^?2, respectively), and superior cycling stabilities. Most importantly, a flexible Ni? Mo? S NS//Ni? Fe? S NS ASC delivers a high volumetric capacity of ≈1.9 mAh cm^?3, excellent energy density of ≈82.13 Wh kg^?1 at 0.561 kW kg^?1, exceptional power density (≈13.103 kW kg^?1 at 61.51 Wh kg^?1) and an outstanding cycling stability, retaining ≈95.86% of initial capacity after 10 000 cycles. This study emphasizes the potential importance of compositional tunability of the NS architecture as a novel strategy for enhancing the charge storage properties of active electrodes.     

Cactus‐Like NiCoP/NiCo‐OH 3D Architecture with Tunable Composition for High‐Performance Electrochemical Capacitors

To effectively enhance the energy density and overall performance of electrochemical capacitors (ECs), a new strategy is demonstrated to increase both the intrinsic activity of the reaction sites and their density. Herein, nickel cobalt phosphides (NiCoP) with high activity and nickel cobalt hydroxides (NiCo‐OH) with good stability are purposely combined in a hierarchical cactus‐like structure. The hierarchical electrode integrates the advantages of 1D nanospines for effective charge transport, 2D nanoflakes for mechanical stability, and 3D carbon cloth substrate for flexibility. The NiCoP/NiCo‐OH 3D electrode delivers a high specific capacitance of ≈1100 F g^?1, which is around seven times higher than that of bare NiCo‐OH. It also possesses ≈90% capacitance retention after 1000 charge–discharge cycles. An asymmetric supercapacitor composed of NiCoP/NiCo‐OH cathode and metal–organic framework‐derived porous carbon anode achieves a specific capacitance of ≈100 F g^?1, high energy density of ≈34 Wh kg^?1, and excellent cycling stability. The cactus‐like NiCoP/NiCo‐OH 3D electrode presents a great potential for ECs and is promising for other functional applications such as catalysts and batteries.     

3D Self‐Supported Fe‐Doped Ni2P Nanosheet Arrays as Bifunctional Catalysts for Overall Water Splitting

The development of highly efficient bifunctional electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is crucial for improving the efficiency of overall water splitting, but still remains challenging issue. Herein, 3D self‐supported Fe‐doped Ni₂P nanosheet arrays are synthesized on Ni foam by hydrothermal method followed by in situ phosphorization, which serve as bifunctional electrocatalysts for overall water splitting. The as‐synthesized (Ni_0.33Fe_0.67)₂P with moderate Fe doping shows an outstanding OER performance, which only requires an overpotential of ≈230 mV to reach 50 mA cm^?2 and is more efficient than the other Fe incorporated Ni₂P electrodes. In addition, the (Ni_0.33Fe_0.67)₂P exhibits excellent activity toward HER with a small overpotential of ≈214 mV to reach 50 mA cm^?2. Furthermore, an alkaline electrolyzer is measured using (Ni_0.33Fe_0.67)₂P electrodes as cathode and anode, respectively, which requires cell voltage of 1.49 V to reach 10 mA cm^?2 as well as shows excellent stability with good nanoarray construction. Such good performance is attributed to the high intrinsic activity and superaerophobic surface property.     

Dual Support System Ensuring Porous Co–Al Hydroxide Nanosheets with Ultrahigh Rate Performance and High Energy Density for Supercapacitors

Layered double hydroxides (LDHs) are promising supercapacitor electrode materials due to their high specific capacitances. However, their electrochemical performances such as rate performance and energy density at a high current density, are rather poor. Accordingly, a facile strategy is demonstrated for the synthesis of the integrated porous Co–Al hydroxide nanosheets (named as GSP‐LDH) with dual support system using dodecyl sulfate anions and graphene sheets as structural and conductive supports, respectively. Owing to fast ion/electron transport, porous and integrated structure, the GSP‐LDH electrode exhibits remarkably improved electrochemical characteristics such as high specific capacitance (1043 F g^?1 at 1 A g^?1) and ultra‐high rate performance capability (912 F g^?1 at 20 A g^?1). Moreover, the assembled sandwiched graphene/porous carbon (SGC)//GSP‐LDH asymmetric supercapacitor delivers a high energy density up to 20.4 Wh kg^?1 at a very high power density of 9.3 kW kg^?1, higher than those of previously reported asymmetric supercapacitors. The strategy provides a facile and effective method to achieve high rate performance LDH based electrode materials for supercapacitors.     

Flexible Solid‐State Supercapacitor Based on Graphene‐based Hybrid Films

A flexible solid‐state asymmetric supercapacitor based on bendable film electrodes with 3D expressway‐like architecture of graphenes and “hard nano‐spacer” is fabricated via an extended filtration assisted method. In the designed structure of the positive electrode, graphene sheets are densely packed, and Ni(OH)₂ nanoplates are intercalated in between the densely stacked graphenes. The 3D expressway‐like electrodes exhibit superior supercapacitive performance including high gravimetric capacitance (≈573 F g^‐1), high volumetric capacitance (≈655 F cm^‐3), excellent rate capability, and superior cycling stability. In addition, another hybrid film of graphene and carbon nanotubes (CNT) is fabricated as the negative electrodes for the designed asymmetric device. In the obtained graphene@CNT films, CNTs served as the hard spacer to prevent restacking of graphene sheets but also as a conductive and robust network to facilitate the electrons collection/transport in order to fulfill the demand of high‐rate performance of the asymmetric supercapacitor. Based on these two hybrid electrode films, a solid‐state flexible asymmetric supercapacitor device is assembled, which is able to deliver competitive volumetric capacitance of 58.5 F cm^‐3 and good rate capacity. There is no obvious degradation of the supercapacitor performance when the device is in bending configuration, suggesting the excellent flexibility of the device.