共查询到20条相似文献,搜索用时 531 毫秒
1.
2.
基于GPRS网络的嵌入式无线数据采集系统设计 总被引:2,自引:0,他引:2
介绍了GPRS网络的特点及作为数据采集系统中传输单元的连接方法。提出了一种嵌入式数据实时采集无线传输的方法,给出了系统的详细设计。无线数据采集系统采用嵌入式结构,使用32位工业级ARM核心处理器,可以快速采集16路模拟电压信号和32路数字信号,数据转换器分辨率为16位,兼容直流信号和交流信号。无线数据传送部分采用工业级传输模块,通过GPRS网络实时将采集的数据传送到服务器上。 相似文献
3.
4.
基于ZigBee与GPRS的嵌入式水质监测系统设计 总被引:2,自引:0,他引:2
为了保障水资源健康可持续利用,提出了具有网络数据中心、区域处理单元以及水质采集模块的3层体系监测方案。着重介绍了区域处理单元的软硬件实现,分析了在ARM系统、GPRS模块、无线单片机系统以及无线传感器的协调工作下,通过GPRS网络和ZigBee网络实现水质参数采集、处理、存储及传送的监测过程。测试运行结果表明,该系统可行性确定,各模块运行稳定,检测数据准确,具备商业推广价值。 相似文献
5.
黄丽军 《电脑编程技巧与维护》2008,(13):57-58
本文针对无线数据通信发展的需求,介绍了一套基于GPRS技术的无线数据传送系统。由单片机控制的远端数据终端将传感器采集的数据通过串行接由驱动无线Modem,经GPRS网络将数据发送到Internet上的远程监控中心,并实现数据的存储、分析处理和显示。文章从硬件和软件两方面描述了系统的设计及实现方法。 相似文献
6.
一种基于单片机的GPRS的无线数据传送系统 总被引:1,自引:0,他引:1
HUANG Lijun 《电脑编程技巧与维护》2008,(15)
本文针对无线数据通信发展的需求,介绍了一套基于GPRS技术的无线数据传送系统。由单片机控制的远端数据终端将传感器采集的数据通过串行接口驱动无线Modem,经GPRS网络将数据发送到Internet上的远程监控中心,并实现数据的存储、分析处理和显示。文章从硬件和软件两方面描述了系统的设计及实现方法。 相似文献
7.
介绍了一种基于ARM硬件平台和WinCE软件平台的无线音视频监控系统设计方案.该设计应用三星公司的S3C2440A为主芯片,结合摄像头、麦克风和GPRS模块等实现数据的采集、处理和网络传送.S3C2440A具有丰富的硬件接口资源,采用H.264作为音视频数据压缩的核心算法,具有很高的数据压缩比率,适合无线传输. 相似文献
8.
本文以LPC2210 ARM芯片作为硬件核心进行了系统的硬件研究和设计.该客户端主要由键盘、液晶显示屏和通信接口组成,客户可在该终端上输入订货信息、进行订货信息的查询、更新商品信息等操作.信息的传送主要是通过串行接口连接Modem利用电话网络、连接GPRS无线模块通过GPRS网络进行传输.主要利用通用的串行通信接口和电话网络、无线GPRS网络进行信息的传输. 相似文献
9.
基于ZigBee与GPRS技术的无线传感器网络网关的设计 总被引:2,自引:0,他引:2
针对传统的无线传感器网络由于计算能力差和带宽有限而造成的网络性能低下、通信效率低等问题,文章提出了一种基于ARM的无线传感器网络网关的解决方案,介绍了网关的组成和特点,阐述了网关的硬件和软件设计方案。在该方案中,网络节点在采集数据后利用ZigBee近距离通信技术将数据传输给网关,网关通过GPRS将数据远距离传送给监控中心,实现了数据的高性能远距离传输,同时解决了网关在线保持的问题。 相似文献
10.
11.
为了满足水产养殖智能化的要求,设计了水产养殖中水质参数的远程实时监控系统,该系统由基于传感器节点,汇聚节点的水质参数无线监测网络和远程数据管理节点组成。采用以CC2430为核心的ZigBee模块传感器节点方案,构建基于ZigBee协议的无线传感网,实现水质数据采集;应用以ARM9微处理器S3 C2410开发的汇聚节点实现数据的汇聚和GPRS无线通信实现远程数据的传输。利用ZigBee技术和GPRS技术,此系统不仅满足了无线数据采集和数据传输的相关指标要求,而且有效地解决了水产养殖系统中布线困难、节点不可移动、不易维护等问题,满足了水产养殖中水质监测的需要。 相似文献
12.
Suraj Sharma Deepak Puthal Sanjay Kumar Jena Albert Y. Zomaya Rajiv Ranjan 《The Journal of supercomputing》2017,73(3):1168-1188
In wireless sensor networks, the sensor nodes find the route towards the sink to transmit data. Data transmission happens either directly to the sink node or through the intermediate nodes. As the sensor node has limited energy, it is very important to develop efficient routing technique to prolong network life time. In this paper we proposed rendezvous-based routing protocol, which creates a rendezvous region in the middle of the network and constructs a tree within that region. There are two different modes of data transmission in the proposed protocol. In Method 1, the tree is directed towards the sink and the source node transmits the data to the sink via this tree, whereas in Method 2, the sink transmits its location to the tree, and the source node gets the sink’s location from the tree and transmits the data directly to the sink. The proposed protocol is validated through experiment and compared with the existing protocols using some metrics such as packet delivery ratio, energy consumption, end-to-end latency, network life time. 相似文献
13.
设计了一种新型的高原冻土监测系统。采用ARM7内核的MCU进行控制,并基于IPv6协议利用IPv6技术和GPRS技术相结合的方式,建立了可自组网的无线传感器网络,实现了对指定区域环境参数的实时监测。系统使用了多个土壤水分传感器、温度传感器、二氧化碳传感器、氮气传感器对高原冻土环境进行全方位实时观测。各监测点将数据通过基于IPv6的无线网络传送给汇聚节点,汇聚节点再通过GPRS网络将数据传送给监控中心。监控中心可以对数据进行记录和分析,更好地指导环境保护和建设工作。 相似文献
14.
Wen-Hwa Liao Yucheng Kao Chien-Ming Fan 《Journal of Network and Computer Applications》2008,31(4):387-401
Data aggregation is important in energy constraint wireless sensor networks which exploits correlated sensing data and aggregates at the intermediate nodes to reduce the number of messages exchanged network. This paper considers the problem of constructing data aggregation tree in a wireless sensor network for a group of source nodes to send sensory data to a single sink node. The ant colony system provides a natural and intrinsic way of exploring search space in determining data aggregation. Moreover, we propose an ant colony algorithm for data aggregation in wireless sensor networks. Every ant will explore all possible paths from the source node to the sink node. The data aggregation tree is constructed by the accumulated pheromone. Simulations have shown that our algorithm can reduce significant energy costs. 相似文献
15.
This paper addresses the problem of secure data transmission and balanced energy consumption in an unattended wireless sensor network (UWSN) comprising of multiple static source nodes and a mobile sink in the presence of adversaries. The proposed system comprises of three phases: the identification of data collection points (convex nodes), path planning by the mobile sink, and secure data transmission. An energy-aware convex hull algorithm is used for the identification of data collection points for data transmission to the mobile sink. Data transmission from sensor nodes to the nearest data collection point is performed using multihop communication and from sensor nodes to the mobile sink in a single hop. Data are securely transmitted through an elliptic curve cryptography based ElGamal scheme for message authentication. A data packet is associated with a digital signature. The variation in a digital signature and threshold energy obtained using support vector machine is used to determine the presence of malicious nodes in the network. The performance of the proposed system is evaluated using Cooja simulator by Contiki for various node counts under a static sink and mobile sink, with different threat scenarios. The results indicate that the proposed system is resilient against threats and provides satisfactory performance 相似文献
16.
GPRS作为新一代无机通信技术,相比GSM技术在无线数据传输及与计算机网络交互通信有着突出的优势。本文介绍了运用GPRS技术进行实时数据采集和传输的系统结构及对该系统的性能分析,并通过实际应用总结了其特点和优势。 相似文献
17.
18.
19.
网络编码能提高无线传感器网络数据传输可靠性,针对现有基于网络编码的数据传输策略随机选取编码向量和使用固定路径所带来的缺陷,设计了一个新的编码矩阵构造方法,并提出了一种新型的基于网络编码的可靠数据传输方法。该编码方案能保证任意k个编码向量线性无关,且不用传输编码向量。数据转发使用"区域推进"机制,自动选取最佳转发节点,将数据包可靠地向sin"k推进",并实现了最少冗余传输和网络均衡能耗。分析与仿真表明,新的数据传输策略能消除现有方法的缺陷,提高数据传输可靠性,降低能耗。 相似文献