Copolymerization of N‐aryl substituted itaconimide with methyl methacrylate: Effect of substituents on monomer reactivity ratio and thermal behavior

The article describes the synthesis and characterization of N‐(4‐methoxy‐3‐chlorophenyl) itaconimide (MCPI) and N‐(2‐methoxy‐5‐chlorophenyl) itaconimide (OMCPI) obtained by reacting itaconic anhydride with 4‐methoxy‐3‐chloroanisidine and 2‐methoxy‐5‐chloroanisidine, respectively. Structural and thermal characterization of MCPI and OMCPI monomers was done by using ¹H NMR, FTIR, and differential scanning calorimetry (DSC). Copolymerization of MCPI or OMCPI with methyl methacrylate (MMA) in solution was carried out at 60°C using AIBN as an initiator and THF as solvent. Feed compositions having varying mole fractions of MCPI and OMCPI ranging from 0.1 to 0.5 were taken to prepare copolymers. Copolymerizations were terminated at low percentage conversion. Structural characterization of copolymers was done by FTIR, ¹H NMR, and elemental analysis and percent nitrogen content was used to calculate the copolymer composition. The monomer reactivity ratios for MMA–MCPI copolymers were found to be r₁ (MMA) = 0.32 ± 0.03 and r₂ (MCPI) = 1.54 ± 0.05 and that for MMA–OMCPI copolymers were r₁ (MMA) = 0.15 ± 0.02 and r₂ (OMCPI) = 1.23 ± 0.18. The intrinsic viscosity [η] of the copolymers decreased with increasing mole fraction of MCPI/or OMCPI. The glass transition temperature as determined from DSC scans was found to increase with increasing amounts of OMPCI in copolymers. A significant improvement in the char yield as determined by thermogravimetry was observed upon copolymerization. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2391–2398, 2006     

Efficiencies of various metallocene/reducing agent catalyst systems in the hydrogenation of polystyrene‐b‐polybutadiene‐b‐polystyrene block copolymers

Various metallocenes, including bis(η⁵‐cyclopentadienyl)cobalt, bis(η⁵‐cyclopentadienyl)nickel, and bis(η⁵‐cyclopentadienyl)titanium dichloride, combined with various reducing agents, including n‐butyllithium, phenyllithium, and triethylaluminum, have been evaluated for their catalytic efficiencies in the hydrogenation of polystyrene‐b‐polybutadiene‐b‐polystyrene (SBS) block copolymer. The efficiencies were determined by monitoring the extent of saturation of double bonds on the polybutadiene segment of the copolymer using FTIR and ¹H‐NMR spectroscopy. The cobaltocene/n‐butyllithium catalyst system was found the most active. The effects of H₂ pressure and the ratio of n‐butyllithium to cobaltocene ratio on the hydrogenation efficiency were also investigated. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1807–1815, 1999     

The synthesis of PHA‐g‐(PTHF‐b‐PMMA) multiblock/graft copolymers by combination of cationic and radical polymerization

A new and promising method for the diversification of microbial polyesters based on chemical modifications is introduced. Poly(3‐hydroxy alkanoate)‐g‐(poly(tetrahydrofuran)‐b‐poly(methyl methacrylate)) (PHA‐g‐(PTHF‐b‐PMMA)) multigraft copolymers were synthesized by the combination of cationic and free radical polymerization. PHA‐g‐PTHF graft copolymer was obtained by the cationic polymerization of THF initiated by the carbonium cations generated from the chlorinated PHAs, poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), and poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) (PHBHx) in the presence of AgSbF₆. Therefore, PHA‐g‐PTHF graft copolymers with hydroxyl ends were produced. In the presence of Ce⁺⁴ salt, these hydroxyl ends of the graft copolymer can initiate the redox polymerization of MMA to obtain PHA‐g‐(PTHF‐b‐PMMA) multigraft copolymer. Polymers obtained were purified by fractional precipitation. In this manner, their γ‐values (volume ratio of nonsolvent to the solvent) were also determined. Their molecular weights were determined by GPC technique. The structures were elucidated using ¹H‐NMR and FTIR spectroscopy. Thermal analyses of the products were carried out using differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synergistic extraction of rare earths(III) from chloride medium with mixtures of 1‐phenyl‐3‐methyl‐4‐benzoyl‐pyrazalone‐5 and di‐(2‐ethylhexyl)‐2‐ethylhexylphosphonate

The synergistic effect of 1‐phenyl‐3‐methyl‐4‐benzoyl‐pyrazalone‐5 (HPMBP, HA) and di‐(2‐ethylhexyl)‐2‐ethylhexylphosphonate (DEHEHP, B) in the extraction of rare earths (RE) from chloride solutions has been investigated. Under the experimental conditions used, there was no detectable extraction when DEHEHP was used as a single extractant while the amount of RE(III) extracted by HPMBP alone was also low. But mixtures of the two extractants at a certain ratio had very high extractability for all the RE(III). For example, the synergistic enhancement coefficient was calculated to be 9.35 for Y³⁺, and taking Yb³⁺ and Y³⁺ as examples, RE³⁺ is extracted as RE(OH)A₂.B. The stoichiometry, extraction constants and thermodynamic functions such as Gibbs free energy change ΔG (?17.06 kJ mol^?1), enthalpy change ΔH (?35.08 kJ mol^?1) and entropy change ΔS (?60.47 J K^?1 mol^?1) for Y³⁺ at 298 K were determined. The separation factors (SF) for adjacent pairs of rare earths were calculated. Studies show that the binary extraction system not only enhances the extraction efficiency of RE(III) but also improves the selectivity, especially between La(III) and the other rare earth elements. Copyright © 2006 Society of Chemical Industry     

Synthesis and characterization of amphiphilic pluronic (F68)‐1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphoethanolamine copolymers and their micelles as a drug carrier

A new Pluronic (F68)‐1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphoethanolamine (DPPE) (Pluronic (F68)–DPPE) copolymer was synthesized with Pluronic (F68) and DPPE. The chemical structure and physical properties of copolymers were determined by FTIR, ¹H NMR, ¹³C NMR, ³¹P NMR, and TGA. Environmental scanning electron microscopy, fluorescence spectroscopy, and dynamic light scattering method confirmed the formation of copolymeric micelles of Pluronic (F68)‐DPPE. To estimate the feasibility as novel drug carriers, the copolymer micelles were prepared by the phase separation dialysis method. Amphotericin B as a lipophilic model drug was incorporated into copolymeric micelles and the drug release behavior was investigated. It was found that the chemical composition of the micelle was a key factor in controlling micelles size, drug‐loading content, and drug release behavior. As DPPE segment weight ratio increased, the micelle size and drug‐loading content increased, and the drug release rate decreased. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of Nano‐γ‐Ferric Oxide by Thermolysis of the 2‐Mercapto‐5‐Methylpyridine‐N‐Oxide‐Iron(III) Complex via Factorial Design

2‐Mercapto‐5‐methylpyridine‐N‐oxide (MMPNO) and its sodium salt (NaMMPNO) were synthesized. The reaction of the latter with Fe³⁺ generates Fe(MMPNO)₃ chelate. The thermolysis of this chelate at 350 °C yielded highly pure reddish‐brown γ‐Fe₂O₃ nanocrystallites with an average particle size of 6.2 nm, a particle size range of 4.2 to 14.8 nm, and a specific surface area of 51.5 m²g^–1. The thermolysis process was optimized using the 2² fractional design. Quantitative tests and characterization of products were carried out by UV‐vis spectroscopy, XRD, LLS, SEM, TGA, BET, TEM, FT‐IR, elemental microanalysis, and classical analytical measurements.     

Structural and Thermal Characterization of A Novel High Nitrogen Energetic Material: (NH4)2DNMT

1,4‐Dihydro‐5H‐(dinitromethylene)‐tetrazole ammonium salt ((NH₄)₂DNMT), a high nitrogen energetic compound, was synthesized and structurally characterized by single‐crystal X‐ray diffraction. The thermal behavior of (NH₄)₂DNMT was studied with DSC and TG‐DTG methods. The kinetic equation of the thermal decomposition reaction is: dα/dT=10^13.17/3β(1−α)⁻² exp(−1.388×10⁵/RT). The critical temperature of thermal explosion is 182.7 °C. The specific heat capacity of (NH₄)₂DNMT was determined and the molar heat capacity is 301 J mol⁻¹ K⁻¹ at 298.15 K. The adiabatic time‐to‐explosion of (NH₄)₂DNMT was calculated to be 277 s. The detonation velocity and detonation pressure were also estimated. All results showed that (NH₄)₂DNMT presents good performance.     

Characterization of poly(trimethylene/butylene terephthalate) copolymer prepared by the copolycondensation of bis(3‐hydroxypropyl terephthalate) and bis(4‐hydroxybutyl terephthalate)

Homopolymers and copolymers were synthesized by polycondensation and copolycondensation, with varying feed ratios of bis(3‐hydroxypropyl terephthalate) (BHPT) and bis(4‐hydroxybutyl terephthalate) (BHBT) at 270°C. In addition, in the mol ratio of 1:1, copoly(trimethylene terephthalate/butylene terephthalate) [P(TT/BT)], with reaction times of 5, 10, 20, 30, and 60 min, was synthesized to identify the chain‐growth process of the copolymers. From differential scanning calorimetry (DSC) data, it was found that a random copolymer might be formed during copolycondensation. The molecular structure of copolymers, formed through the interchange reaction of BHPT and BHBT, was investigated using carbon nuclear magnetic resonance spectroscopy (¹³C‐NMR). We calculated the sequence‐length distributions of trimethylene and butylene sequences and randomness in the copolymers using ¹³C‐NMR data. From the values of the number‐average sequence length calculated, it was determined that a random copolymer was produced: This result coincides with previous DSC data. The lateral spacing of the unit cell of the copolymer increased slowly when the mol percent of one monomer was increased to that of the other monomer, indicating broadening of the unit cell by lateral distortion. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2200–2205, 2003     

Synthesis and characterization of poly[4‐(2‐thiazolylazo)phenyl methacrylate]‐co‐poly(methyl methacrylate)

A new methacrylic monomer, 4‐(2‐thiazolylazo)phenylmethacrylate (TPMA) was synthesized. Copolymerization of the monomer with methyl methacrylate (MMA) was carried out by free radical polymerization in THF solution at 70 ± 0.5°C, using azobisisobutyronitrile (AIBN) as an initiator. The monomer TPMA and the copolymer poly(TPMA‐co‐MMA) were characterized by Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance (NMR), and elemental analysis methods. The polydispersity index of the copolymer was determined using gel permeation chromatography (GPC). Thermogravimetric analysis (TGA) of the copolymer performed in nitrogen revealed that the copolymer was stable to 270°C. The glass transition temperature (T_g) of the copolymer was higher than that of PMMA. The copolymer with a pendent aromatic heterocyclic group can be dissolved in common organic solvents and shows a good film‐forming ability. Both the monomer TPMA and the copolymer poly (TPMA‐co‐MMA) have bright colors: orange and yellow, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2152–2157, 2007     

Synthesis and swelling properties of 2‐hydroxyethyl methacrylate‐co‐1‐vinyl‐3‐(3‐sulfopropyl)imidazolium betaine hydrogels

A series of 2‐hydroxyethyl methacrylate/1‐vinyl‐3‐(3‐sulfopropyl)imidazolium betaine (HEMA/VSIB) copolymeric gels were prepared from various molar ratios of HEMA and the zwitterionic monomer VSIB. The influence of the amount of VSIB in copolymeric gels on their swelling behavior in water and various saline solutions at different temperatures and the drug‐release behavior, compression strength, and crosslinking density were investigated. Experimental results indicated that the PHEMA hydrogel and the lower VSIB content (3%) in the HEMA/VSIB gel exhibited an overshooting phenomenon in their dynamic swelling behavior, and the overshooting ratio decreased with increase of the temperature. In the equilibrium water content, the value increased with increase of the VSIB content in HEMA/VSIB hydrogels. In the saline solution, the water content for these gels was not affected by the ion concentration when the salt concentration was lower than the minimum salt concentration (MSC) of poly(VSIB). When the salt concentration was higher than the MSC of poly(VSIB), the deswelling behavior of the copolymeric gel was more effectively suppressed as more VSIB was added to the copolymeric gels. However, the swelling behavior of gels in KI, KBr, NaClO₄, and NaNO₃ solutions at a higher concentration would cause an antipolyelectrolyte phenomenon. Besides, the anion effects were larger than were the cation effects in the presence of a common anion (Cl^?) with different cations and a common cation (K⁺) with different anions for the hydrogel. In drug‐release behavior, the addition of VSIB increased the drug‐release ratio and the release rate. Finally, the addition of VSIB in the hydrogel improved the gel strength and crosslinking density of the gel. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2888–2900, 2001     

Random copolymerization of 2,2‐dimethyltri methylene carbonate and ε‐caprolactone using a rare‐earth tris(4‐tert‐butylphenolate)s as a single‐component initiator

Highly random copolymers of 2,2‐dimethyltrimethylene carbonate (DTC) and ε‐caprolactone (CL) were synthesized by single component rare‐earth tris(4‐tert‐butylphenolate)s [Ln(OTBP)₃] for the first time. The influences of reaction conditions on the copolymerization initiated by La(OTBP)₃ have been examined in detail. The monomer reactivity ratios of DTC and CL determined by the Fineman–Ross method are 4.0 for r_DTC and 0.27 for r_CL. The microstructure of the copolymer was determined by the analyses of the diads DTC–DTC, DTC–CL, CL–DTC and CL–CL of the ¹H NMR spectra. The high degree of randomness of the chain structure was further confirmed by the ¹³C NMR spectra and differential scanning calorimetry. The thermal properties of the copolymers as a function of composition are reported. The mechanism investigated by ¹H NMR data indicates that the rare‐earth tris(4‐tert‐butylphenolate)s initiate the ring‐opening copolymerization of DTC and CL with acyl‐oxygen bond cleavages of the monomers. Copyright © 2004 Society of Chemical Industry     

Preparation and drug release behaviors of 5‐fluorouracil loaded poly(glycolide‐co‐lactide‐co‐caprolactone) nanoparticles

5‐Fluorouracil (5‐Fu) loaded poly(glycolide‐co‐lactide‐co‐caprolactone) (PGLC) nanoparticles were prepared by modified spontaneous emulsification solvent diffusion method (modified‐SESD method) and characterized by dynamic light scattering, scanning electron microscopy and ¹H NMR determination. It was found that the obtained nanoparticles showed near spherical shape and was controllable with the radius range of 30–100 nm. Compared with the nanoparticles prepared by polylactide and poly (lactide‐co‐glycolide) (PLGA) under the similar preparation condition, yield of PGLC nanoparticles was the highest, which reached to about 100%. On the other hand, drug entrapment efficiency of PGLC nanoparticles was also higher than that of PLGA and PLLA nanoparticles. 5‐Fu release behavior of PGLC nanoparticles in vitro showed that 5‐Fu release of PGLC nanoparticles showed a near zero‐order release profile, and 5‐Fu release rate of PGLC nanoparticles was faster than that of PLLA and PLGA nanoparticles. According to degradation behavior of PGLC nanoparticles, it could be proposed that the kinetic of degradation controlled release played an important role in the release process of PGLC nanoparticles. It revealed that the PGLC nanoparticles could be a promising drug carrier. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Poly(vinyl pyrrolidone‐co‐vinyl acetate)‐graft‐poly(ε‐caprolactone) as a compatibilizer for cellulose acetate/poly(ε‐caprolactone) blends

Poly(vinyl pyrrolidone‐co‐vinyl acetate)‐graft‐poly(ε‐caprolactone) (PVPVAc‐g‐PCL) was synthesized by radical copolymerization of N‐vinyl‐2‐pyrrolidone (VP)/vinyl acetate (VAc) comonomer and PCL macromonomer containing a reactive 2‐hydroxyethyl methacrylate terminal. The graft copolymer was designed in order to improve the interfacial adhesiveness of an immiscible blend system composed of cellulose acetate/poly(ε‐caprolactone) (CA/PCL). Adequate selections of preparation conditions led to successful acquisition of a series of graft copolymer samples with different values of molecular weight ( ), number of grafts (n), and segmental molecular weight of PVPVAc between adjacent grafts (M_n (between grafts)). Differential scanning calorimetry measurements gave a still immiscible indication for all of the ternary blends of CA/PCL/PVPVAc‐g‐PCL (72 : 18 : 10 in weight) that were prepared by using any of the copolymer samples as a compatibilizer. However, the incorporation enabled the CA/PCL (4 : 1) blend to be easily melt‐molded to give a visually homogeneous film sheet. This compatibilizing effect was found to be drastically enhanced when PVPVAc‐g‐PCLs of higher and M_n (between grafts) and lower n were employed. Scanning electron microscopy revealed that a uniform dispersion of the respective ingredients in the ternary blends was attainable with an assurance of the mixing scale of several hundreds of nanometers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Nonionic water‐soluble polymer: Preparation,characterization, and application of poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) as a polychelatogen

The free‐radical copolymerization of water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) was carried out with a feed monomer ratio of 75:25 mol %, and the total monomer concentration was 2.67M. The synthesis of the copolymer was carried out in dioxane at 70°C with benzoyl peroxide as the initiator. The copolymer composition was obtained with elemental analysis and ¹H‐NMR spectroscopy. The water‐soluble polymer was characterized with elemental analysis, Fourier transform infrared, ¹H‐ and ¹³C‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymer were performed. The thermal behavior of the copolymer and its complexes were investigated with differential scanning calorimetry (DSC) and thermogravimetry techniques under a nitrogen atmosphere. The copolymer showed high thermal stability and a glass transition in the DSC curves. The separation of various metal ions by the water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) reagent in the aqueous phase with liquid‐phase polymer‐based retention was investigated. The method was based on the retention of inorganic ions by this polymer in a membrane filtration cell and subsequent separation of low‐molar‐mass species from the polymer/metal‐ion complex formed. Poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) could bind metal ions such as Cr(III), Co(II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) in aqueous solutions at pHs 3, 5, and 7. The retention percentage for all the metal ions in the polymer was increased at pH 7, at which the maximum retention capacity could be observed. The interaction of inorganic ions with the hydrophilic polymer was determined as a function of the pH and filtration factor. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 178–185, 2006     

Removal of aqueous toxic Hg(II) by functionalized mesoporous silica materials

BACKGROUND: Hg(II) is one of the most toxic metals and has received particular attention in environmental pollution. Hg(II) pollution is common in water sources, so rapid and efficient methods must be developed for its removal from water samples. Mesoporous silica (MS) is an ideal adsorbent due to its high surface area and biocompatibility. The efficiency and selectivity of MS adsorbents can be improved by surface modification. RESULTS: A new sorbent for trace Hg(II) removal was developed by grafting 1‐(3‐carboxyphenyl)‐2‐thiourea (CPTU) onto SBA‐15 mesoporous silica. The optimum pH range for Hg(II) adsorption was 3‐7 and the maximum static adsorption capacity was 64.5 mg g^?1. An enrichment factor of 150 was obtained with a relative standard deviation < 1.5% (n = 8). Common coexisting ions did not interfere with the adsorption of Hg(II) under optimal conditions. Quantitative recovery was achieved by stripping with a mixed solution of 1 mol L^?1 HCl and 5% CS(NH₂)₂. Efficient adsorption capacity of the recycled material could still be maintained at a level of 95% at the 7th cycle. CONCLUSION: 1‐(3‐carboxyphenyl)‐2‐thiourea functionalized SBA‐15 mesoporous silica was synthesized and applied for Hg(II) removal from water samples with high efficiency and selectivity. Copyright © 2012 Society of Chemical Industry     

Characterization and application of polypropylene films modified with stimuli‐sensitive copolymers with an Ar‐plasma postpolymerization technique

Surface‐modified polypropylene (PP) films with thermally and photochemically sensitive copolymers consisting of N‐(2‐hydroxypropyl)methacrylamide (HPMA) and 4‐(4‐methoxyphenylazo)phenyl methacrylate (MPAP), poly(HPMA‐co‐MPAP)‐g‐PP (abbreviated g‐PP) film, were prepared by graft copolymerization with an Ar‐plasma postpolymerization technique. The surfaces of the g‐PP films were characterized by means of X‐ray photoelectron spectroscopy; the percentage grafting of poly(HPMA‐co‐MPAP) with a number‐average molecular weight of 3.28 × 10⁴ was 7.12%, and the molar ratio of HPMA–MPAH in the copolymer was 0.75:0.25. The stimuli‐sensitive adsorption of albumin and polystyrene microspheres on the g‐PP film was also measured. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 143–148, 2003     

Drug release from electrospun fibers of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) grafted with poly(N‐vinylpyrrolidone)

Poly(N‐vinylpyrrolidone) (PVP) groups were grafted onto poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) backbone to modify the properties of PHBV and synthesize a new novel biocompatible graft copolymer. Based on these graft copolymers, electrospun fiber mats and commonly cast films were explored as drug delivery vehicles using tetracycline hydrochloride as a model drug. Toward that end, the fibers were electrospun and the films were cast from chloroform solutions containing a small amount of methanol to solubilize the drug. The Brookfield viscosities of the solution were determined to achieve the optimal electrospinning conditions. The vitro release of the tetracycline hydrochloride from these new drug delivery systems was followed by UV–vis spectroscopy. To probe into the factors affected on the release behavior of these drug delivery systems, their water absorbing abilities in phosphate buffer solution were investigated, together with their surface hydrophilicity, porosity and crystallization properties were characterized by water contact angles, capillary flow porometer, DSC, and WAXD, respectively. The morphological changes of these drug delivery vehicles before and after release were also observed with SEM. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis,Crystal Structure,and Thermal Behavior of 3‐(4‐Aminofurazan‐3‐yl)‐4‐(4‐nitrofurazan‐3‐yl)furazan (ANTF)

The energetic material 3‐(4‐aminofurazan‐3‐yl)‐4‐(4‐nitrofurazan‐3‐yl)furazan (ANTF) with low melting‐point was synthesized by means of an improved oxidation reaction from 3,4‐bis(4′‐aminofurazano‐3′‐yl)furazan. The structure of ANTF was confirmed by ¹³C NMR spectroscopy, mass spectrometry, and the crystal structure was determined by X‐ray diffraction. ANTF crystallized in monoclinic system P2₁/c, with a crystal density of 1.785 g cm⁻³ and crystal parameters a=6.6226(9) Å, b=26.294(2) Å, c=6.5394(8) Å, β=119.545(17)°, V=0.9907(2) nm³, Z=4, μ=0.157 mm⁻¹, F(000)=536. The thermal stability and non‐isothermal kinetics of ANTF were studied by differential scanning calorimetry (DSC) with heating rates of 2.5, 5, 10, and 20 K min⁻¹. The apparent activation energy (E_a) of ANTF calculated by Kissinger's equation and Ozawa's equation were 115.9 kJ mol⁻¹ and 112.6 kJ mol⁻¹, respectively, with the pre‐exponential factor lnA=21.7 s⁻¹. ANTF is a potential candidate for the melt‐cast explosive with good thermal stability and detonation performance.     

Synthesis and Characterization of 3,3′‐Bisazidomethyl Oxetane‐3‐Azidomethyl‐3′‐Methyl Oxetane Alternative Block Energetic Thermoplastic Elastomer

3,3′‐Bisazidomethyl oxetane‐3‐azidomethyl‐3′‐methyl oxetane (BAMO‐AMMO) tri‐block copolymer was successfully synthesized by azidation of a polymeric substrate containing bromo leaving groups, and an alternative block energetic thermoplastic elastomer (ETPE) was prepared by chain extension reaction. The tri‐block copolymer was characterized by Fourier transform infrared (FTIR), ¹H NMR, and ¹³C NMR spectroscopy, X‐ray diffraction (XRD), and thermogravimetric analysis (TGA). It was found that the composition of the copolymer is nearly 1 : 1; crystallinity of the copolymer (71.81 %) is less than that of PBAMO (78.30 %). This is due to a partly mixture between soft and hard segments. Kinetic result shows that a crosslinking network is formed after the decomposition of azide group. Tensile strength of alternative block ETPE is 150 % of traditionally synthesized BAMO‐AMMO ETPE.     

Synthesis and surface properties of polydimethylsiloxane‐based block copolymers: poly[dimethylsiloxane‐block‐ (ethyl methacrylate)] and poly[dimethylsiloxane‐block‐(hydroxyethyl methacrylate)]

A polydimethylsiloxane (PDMS) macroazoinitiator was synthesized from bis(hydroxyalkyl)‐terminated PDMS and 4,4′‐azobis‐4‐cyanopentanoic acid by a condensation reaction. The bifunctional macroinitiator was used for the block copolymerization of ethyl methacrylate (EMA) and 2‐(trimethylsilyloxy)ethyl methacrylate (TMSHEMA) monomers. The poly(DMS‐block‐EMA) and poly(DMS‐block‐TMSHEMA) copolymers thus obtained were characterized using Fourier transform infrared and ¹H NMR spectroscopy and differential scanning calorimetry. After the deprotection of trimethylsilyl groups, poly(DMS‐block‐HEMA) and poly(DMS‐block‐EMA) copolymer film surfaces were analysed using scanning electron microscopy and X‐ray photoelectron spectroscopy. The effects of the PDMS concentration in the copolymers on both air and glass sides of films were examined. The PDMS segments oriented and moved to the glass side in poly(DMS‐block‐EMA) copolymer film while orientation to the air side became evident with increasing DMS content in poly(DMS‐block‐HEMA) copolymer film. The block copolymerization technique described here is a versatile and economic method and is also applicable to a wide range of monomers. The copolymers obtained have phase‐separated morphologies and the effects of DMS segments on copolymer film surfaces are different at the glass and air sides. Copyright © 2010 Society of Chemical Industry