Mechanistic investigation of the hydrodechlorination of 1,1,1,2-tetrafluorodichloroethane on metal fluoride-supported Pt and Pd

The hydrodechlorination of CF₃CCl₂F over Pd and Pt supported on β-AlF₃ and MgF₂ with D₂ gas has been investigated employing temperature programmed isotope exchange (TPIE) under static conditions. The isotope exchange observed between the H-loaded metal catalyst and the D₂ gas phase demonstrates the significantly higher hydrogen uptake capability of Pd-based catalysts. Both Pd and Pt on β-AlF₃, show significantly higher hydrogen/deuterium uptake and isotope exchange activity as compared with the MgF₂ support, probably due to the presence of hexagonal channels in β-AlF₃ and its higher Lewis acidity. The combination of these properties make Pd/β-AlF₃ a superior catalyst for selective hydrodechlorination of CF₃CCl₂F. Based on the results of the hydrodechlorination of CF₃CCl₂F with D₂, a competitive rather than a consecutive mechanism is proposed. The data from H/D-TPIE are best interpreted by the formation of surface carbene species as intermediates.     

Transient kinetics investigations of reaction intermediates involved in CF2Cl2 hydrodechlorination

The reaction intermediates formed during hydrodechlorination of CF₂Cl₂ catalyzed by Pd supported on AlF₃ have been investigated using steady state and transient kinetics experiments. The formation of the coupling product C₂H₆ and its dependence on H₂ partial pressure have been used to investigate the pathways by which possible surface carbene species react. Reactions of surface species formed during the CF₂Cl₂ hydrodechlorination with scavenging agent C₂H₄ yielded addition products typical of metal-carbenes. Information from these experiments suggests that for carbene and fluorocarbene species formed on the surface of a Pd/AlF₃ catalyst the rates of hydrogenation vs. coupling reactions are different.     

Total oxidation catalysts based on manganese or copper oxides and platinum or palladium I: Characterisation

Temperature-programmed reduction (TPR), oxidation (TPO), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) were used to characterise catalysts based on manganese oxides, copper oxides or one of them mixed with platinum or palladium-supported on γ-alumina. The catalysts were characterised before and after they had been exposed either to high temperature in the presence of steam or to sulphur dioxide. Raman spectroscopy, XRD, XPS and TPR performed on the fresh samples of MnO_x, mixed MnO_x–Pt and MnO_x–Pd revealed the presence of a mixture of manganese oxides, particularly Mn₂O₃. In the fresh mixed MnO_x–Pd and CuO_x–Pd samples, Pd catalysed the reduction of both MnO_x and CuO_x, whereas Pt only catalysed the reduction of MnO_x. After hydrothermal treatment at 900°C of the MnO_x, mixed MnO_x–Pt and MnO_x–Pd samples, there was a formation of new manganese oxide phase, Mn₃O₄ detected by Raman spectroscopy. TPR revealed increasing interaction between the metal oxides and the noble metals in the hydrothermally treated mixed MnO_x–Pd and CuO_x–Pd samples, and also the appearance of interaction in the treated mixed CuO_x–Pt sample. The sulphur adsorbed in all the MnO_x samples formed sulphate, which was more difficult to reduce than the oxides. Also, the reduction temperature of sulphates was lowered when noble metals are present.     

Reactor and in situ FTIR studies of Pt/BaO/Al2O3 and Pd/BaO/Al2O3 NOx storage and reduction (NSR) catalysts

The reduction of NO under cyclic “lean”/“rich” conditions was examined over two model 1 wt.% Pt/20 wt.% BaO/Al₂O₃ and 1 wt.% Pd/20 wt.% BaO/Al₂O₃ NO_x storage reduction (NSR) catalysts. At temperatures between 250 and 350 °C, the Pd/BaO/Al₂O₃ catalyst exhibits higher overall NO_x reduction activity. Limited amounts of N₂O were formed over both catalysts. Identical cyclic studies conducted with non-BaO-containing 1 wt.% Pt/Al₂O₃ and Pd/Al₂O₃ catalysts demonstrate that under these conditions Pd exhibits a higher activity for the oxidation of both propylene and NO. Furthermore, in situ FTIR studies conducted under identical conditions suggest the formation of higher amounts of surface nitrite species on Pd/BaO/Al₂O₃. The IR results indicate that this species is substantially more active towards reaction with propylene. Moreover, its formation and reduction appear to represent the main pathway for the storage and reduction of NO under the conditions examined. Consequently, the higher activity of Pd can be attributed to its higher oxidation activity, leading both to a higher storage capacity (i.e., higher concentration of surface nitrites under “lean” conditions) and a higher reduction activity (i.e., higher concentration of partially oxidized active propylene species under “rich” conditions). The performance of Pt and Pd is nearly identical at temperatures above 375 °C.     

Reversible sorption–desorption of NOx by mixed oxides under various atmospheres

Characteristics of MnO_y–ZrO₂ and Pt–ZrO₂–Al₂O₃ as reversible sorbents of NO_x were investigated under dynamic changes in atmosphere. These sorbents can be used reversibly with a change of C₃H₈ concentration in the reaction gases. Catalytic reduction of NO occurred in the presence of propane, which was more pronounced on Pt–ZrO₂–Al₂O₃ than on MnO_y-ZrO₂ due to high activity of Pt surface for this reaction on MnO_y in MnO_y–ZrO₂. The sorption was observed as soon as the atmosphere changed from a reducing to an oxidizing one. This implies that a high equilibrium partial pressure of O₂ is necessary for NO uptake since the sorbed NO⁻₃ species becomes stable. The beginning of NO_x desorption atmospheres was somewhat dependent on the amount of stored NO_x. The presence of propane in the gas phase strongly affected the characteristic sorption and desorption properties of MnO_y–ZrO₂ and Pt–ZrO₂–Al₂O₃. The sorption and desorption properties are different for MnO_y–ZrO₂ and Pt–ZrO₂–Al₂O₃, since the noble metal or metal oxide possesses unique activity for the NO reaction with C₃H₈ and the amount of oxygen available for oxidative sorption of NO.     

Total oxidation catalysts based on manganese or copper oxides and platinum or palladium II: Activity, hydrothermal stability and sulphur resistance

Deactivation of catalysts based on either manganese oxides, copper oxides, platinum, palladium or combinations of these metal oxides and noble metals supported on γ-alumina was studied. The activity of the catalysts for the oxidation of carbon monoxide, naphthalene and methane, in a mixture resembling the flue gases from wood combustion, was measured before and after exposure of the catalysts either to a temperature of 900°C in the presence of steam or to sulphur dioxide. Most of the mixed catalysts were more resistant to hydrothermal and sulphur treatments than the catalysts with a single active component. After the hydrothermal treatment the activity of the MnO_x catalyst was enhanced. When Pt is combined with MnO_x or CuO_x, the loss of activity of Pt was decreased during the hydrothermal treatment. Also, the hydrotreated mixed MnO_x–Pd and CuO_x–Pd catalysts were more active than the treated Pd catalyst for the oxidation of methane. After sulphur treatment, the activities of the mixed MnO_x–Pt (Pt: 0.05 mol%), MnO_x–Pd and CuO_x–Pd catalysts were improved for the oxidation of carbon monoxide and naphthalene. Among the catalysts studied, the MnO_x–Pt, CuO_x–Pt and CuO_x–Pd catalysts, with a metal oxide and a noble metal loading of 10 and 0.1 mol%/γ-alumina, respectively, had the best combination of activity, thermal stability and resistance to sulphur treatment.     

Characterization of Pd-based FCC CO/NOx control additives by in situ FTIR and extended X-ray absorption fine structure spectroscopies

Pdⁿ⁺/Ceⁿ⁺/Na⁺/γ-Al₂O₃-type materials used as FCC additives for CO/NO_x control were characterized by extended X-ray absorption fine structure (EXAFS) spectroscopy and in situ FTIR. The EXAFS data indicate that in freshly prepared samples palladium is present in the form of highly dispersed PdO species. Reduction with H₂ at 500 °C leads to the formation of small Pd clusters incorporating on average approximately six to eight metal atoms at a Pd−Pd bond distance of 2.76 Å. All components of these materials can interact with NO and promote the formation of nitrate/nitrite species, essentially “trapping” NO_x species on the catalyst surface. However, the Na⁺ species dominate the surface chemistry and readily form sodium nitrates with a characteristic IR band at 1370–1385 cm⁻¹. Finally, hydroxyls from the support are also actively participating in the formation of HNO_x type compounds with characteristic stretching vibrations in the 3500–3572 cm⁻¹ region.     

Kinetics of the selective catalytic reduction of NO by NH3 on a Cu-faujasite catalyst

The kinetics of the selective catalytic reduction (SCR) of NO by NH₃ in the presence of O₂ has been studied on a 5.5% Cu-faujasite (Cu-FAU) catalyst. Cu-FAU was composed of cationic and oxocationic Cu species. The SCR was studied in a gas phase-flowing reactor operating at atmospheric pressure. The reaction conditions explored were: 458<T_R<513 K, 2503 (ppm) < 4000, 12 (%) < 4. The kinetic orders were 0.8–1 with respect to NO, 0.5–1 with respect to O₂, and essentially 0 with respect to NH₃. Based on these kinetic partial orders of reactions and elementary chemistry, a wide variety of mechanisms were explored, and different rate laws were derived. The best fit between the measured and calculated rates for the SCR of NO by NH₃ was obtained with a rate law derived from a redox Mars and van Krevelen mechanism. The catalytic cycle is described by a sequence of three reactions: (i) Cu^I is oxidized by O₂ to “Cu^II-oxo”, (ii) “Cu^II-oxo” reacts with NO to yield “Cu^II-N_xO_y”, and (iii) finally “Cu^II-N_xO_y” is reduced by NH₃ to give N₂, H₂O, and the regeneration of Cu^I (closing of the catalytic cycle). The rate constants of the three steps have been determined at 458, 483, and 513 K. It is shown that Cu^I or “Cu^II-oxo” species constitute the rate-determining active center.     

Catalytic behavior of La–Sr–Ce–Fe–O mixed oxidic/perovskitic systems for the NO+CO and NO+CH4+O2 (lean-NOx) reactions

Mixed oxides of the general formula La_0.5Sr_xCe_yFeO_z were prepared by using the nitrate method and characterized by XRD and Mössbauer techniques. The crystal phases detected were perovskites LaFeO₃ and SrFeO_3−x and oxides -Fe₂O₃ and CeO₂ depending on x and y values. The low surface area ceramic materials have been tested for the NO+CO and NO+CH₄+O₂ (“lean-NO_x”) reactions in the temperature range 250–550°C. A noticeable enhancement in NO conversion was achieved by the substitution of La³⁺ cation at A-site with divalent Sr⁺² and tetravalent Ce⁺⁴ cations. Comparison of the activity of the present and other perovskite-type materials has pointed out that the ability of the La_0.5Sr_xCe_yFeO_z materials to reduce NO by CO or by CH₄ under “lean-NO_x” conditions is very satisfying. In particular, for the NO+CO reaction estimation of turnover frequencies (TOFs, s⁻¹) at 300°C (based on NO chemisorption) revealed values comparable to Rh/-Al₂O₃ catalyst. This is an important result considering the current tendency for replacing the very active but expensive Rh and Pt metals. It was found that there is a direct correlation between the percentage of crystal phases containing iron in La_0.5Sr_xCe_yFeO_z solids and their catalytic activity. O₂ TPD (temperature-programmed desorption) and NO TPD studies confirmed that the catalytic activity for both tested reactions is related to the defect positions in the lattice of the catalysts (e.g., oxygen vacancies, cationic defects). Additionally, a remarkable oscillatory behavior during O₂ TPD studies was observed for the La_0.5Sr_0.2Ce_0.3FeO_z and La_0.5Sr_0.5FeO_z solids.     

The selective catalytic reduction of nitrogen oxides by methane on noble metal-loaded sulfated zirconia

The selective catalytic reduction of NO_x by methane on noble metal-loaded sulfated zirconia (SZ) catalysts was studied. Ru, Rh, Pd, Ag, Ir, Pt, and Au-loaded sulfated zirconia catalysts were compared with the intact sulfated zirconia. For the NO–CH₄–O₂ reaction, Ru, Rh, Pd, Ir, and Pt showed promotion effect on NO_x reduction, while for the NO₂–CH₄–O₂ reaction, only Rh and Pd showed promotion effect. Over intact and Rh, Pd, Ag, and Au-loaded sulfated zirconia, NO_x conversion in NO₂–CH₄–O₂ reaction was significantly higher than that in NO–CH₄–O₂ reaction, while clear difference was not observed over Ru, Ir, and Pt-loaded sulfated zirconia. Comparison of [NO₂]/([NO]+[NO₂]) in the effluent gases in NO–O₂ and NO₂–O₂ reactions showed that Ru, Ir, and Pt has high activity for NO oxidation under the reaction conditions. These facts suggest that effects of these metals toward NO_x reduction by methane can be categorized into the following three groups: (i) low activity for NO oxidation to NO₂, and high activity for NO₂ reduction to N₂ (Pd, Rh); (ii) high activity for NO oxidation to NO₂, and low activity for NO₂ reduction to N₂ (Ru, Ir, Pt); (iii) low activity for both reactions (Ag, Au). To confirm these suggestions, combination of these metals were investigated on binary or physically-mixed catalysts. The combination of Pd or Rh with Pt or Ru gave high activity for the selective reduction of NO_x by methane.     

NOx storage and reduction characteristics of Pd/MnOx–CeO2 at low temperature

The reaction between hydrogen and NO was studied over 1 wt.% Pd supported on NO_x-sorbing material, MnO_x–CeO₂, at low temperatures. The result of pulse mode reactions suggest that NO_x adsorbed as nitrate and/or nitrite on MnO_x–CeO₂ was reduced by hydrogen, which was spilt-over from Pd catalyst. The NO_x storage and reduction (NSR) cycles were carried out over Pd/MnO_x–CeO₂ in a conventional flow reactor at 150 °C. In a storage step, NO was removed by the oxidative adsorption from a stream of 0.04–0.08% NO, 5–10% O₂, and He balance. This was followed by a reducing step, where a stream of 1% H₂/He was supplied to ensure the conversion of nitrate/nitrite to N₂ and thus restore the adsorbability. It was revealed that the NSR cycle is much more suitable for the H₂–deNO_x process in excess O₂, compared to a conventional steady state reaction mode.     

Defective structure, oxygen mobility, oxygen storage capacity, and redox properties of RE-based (RE = Ce, Pr) solid solutions

Defective structures, surface textures, oxygen mobility, oxygen storage capacity (OSC), and redox properties of RE_0.6Zr_0.4O₂ and of RE_0.6Zr_0.4−xY_xO₂ (RE=Ce, Pr; x=0, 0.05) solid solutions have been investigated using X-ray diffraction (XRD), temperature-programmed desorption (TPD), temperature-programmed reduction (TPR), O₂−H₂ and O₂−CO titration, ¹⁸O/¹⁶O isotope exchange, CO pulsing reaction, and X-ray photoelectron spectroscopy (XPS) techniques. The effects of doping noble metal onto RE_0.6Zr_0.4−xY_xO₂ on oxygen mobility and surface oxygen activities have also been studied. Based on the experimental outcomes, we conclude that: (i) a Pr-based solid solution has better redox behavior than a Ce-based one; (ii) incorporation of yttrium ions in the lattices of CZ and PZ solid solutions could result in an enhancement in oxygen vacancy concentration, Ce⁴⁺/Ce³⁺ and Pr⁴⁺/Pr³⁺ redox properties, lattice oxygen mobility, and oxygen storage capacity; and (iii) doping the noble metal (Rh, Pt, and Pd) onto RE-based solid solution has positive effect on the properties concerned in this work.     

Alumina supported cobalt–palladium catalysts for the reduction of NO by methane in stationary sources

In order to improve a “Three Function Catalysts Model”, the present paper deals with alumina based catalysts containing cobalt and palladium for the NO reduction by methane.

The deNO_x temperature window was estimated by adsorption and subsequent desorption of NO in lean conditions. Two NO_x desorption peaks were detected for both catalysts. For Pd(0.63)Co(0.58)/Al₂O₃, the two desorption peaks appeared at 205 and 423 °C, whereas for Pd(0.14)Co(0.57)/Al₂O₃, the maxima desorption temperature peaks were at 205 and 487 °C. In addition, NO oxidation was also studied to evaluate the catalyst first function. It was found that, the oxidation begins on Co–Pd/Al₂O₃ around 250 °C. On Pd(0.63)Co(0.58)/Al₂O₃, 8% of deNO_x were found in the range of the second NO_x desorption peak temperature (410 °C). During TPSR, C_xH_yO_z species such as formaldehyde were detected. These oxygenate species are the reactive intermediate for deNO_x by methane.     

Cu-ZSM-5 zeolite highly active in reduction of NO with decane under water vapor presence: Comparison of decane, propane and propene by in situ FTIR

Selective catalytic reduction of NO_x (SCR-NO_x) with decane, and for comparison with propane and propene over Cu-ZSM-5 zeolite (Cu/Al 0.49, Si/Al 13.2) was investigated under presence and absence of water vapor. Decane behaves in SCR-NO_x like propene, i.e. the Cu-zeolite activity increased under increasing concentration of water vapor, as demonstrated by a shift of the NO_x–N₂ conversion to lower temperatures, in contrast to propane, where the NO_x–N₂ conversion is highly suppressed. In situ FTIR spectra of sorbed intermediates revealed similar spectral features for C₁₀H₂₂– and C₃H₆–SCR-NO_x, where –CH_x, R–NO₂, –NO₃⁻, Cu⁺–CO, –CN, –NCO and –NH species were found. On contrary, with propane –CH_x, R–NO₂, NO₃⁻, Cu⁺–CO represented prevailing species. A comparison of the in situ FTIR spectra (T–O–T and intermediate vibrations) recorded at pulses of propene and propane, moreover, under presence and absence of water vapor in the reaction mixture, revealed that the Cu²⁺–Cu⁺ redox cycle operates with the C₃H₆–SCR-NO_x reactions in both presence/absence of water vapor, while with C₃H₈–SCR-NO_x, the redox cycle is suppressed by water vapor. It is concluded that decane cracks to low-chain olefins and paraffins, the former ones, more reactive, preferably take part in SCR-NO_x. It is concluded that formation of olefinic compounds at C₁₀H₂₂–SCR-NO_x is decisive for the high activity in the presence of water vapor, while water molecules block propane activation. The increase in NO_x–N₂ conversion due to water vapor in C₁₀H₂₂–SCR-NO_x should be connected with the increased reactivity of intermediates. These are suggested to pass from R–NO_x → –CN → –NCO → NH₃; the latter reacts with another activated NO_x molecule to molecular nitrogen. The positive effect of water vapor on the NO_x–N₂ conversion is attributed to increased hydrolysis of –NCO intermediates.     

Direct decomposition of nitric oxide over Ba catalysts supported on CeO2-based mixed oxides

The direct decomposition of nitric oxide (NO) over barium catalysts supported on various metal oxides was examined in the absence and presence of O₂. Among the Ba catalysts supported on single-component metal oxides, Ba/Co₃O₄ and Ba/CeO₂ showed high NO decomposition activities, while Ba/Al₂O₃, Ba/SiO₂, and Ba/TiO₂ exhibited quite low activities. The effect of an addition of second components to Co and Ce oxides was further examined, and it was found that the activities were significantly enhanced using Ce–Mn mixed oxides as support materials. XRD results indicated the formation of CeO₂–MnO_x solid solutions with the cubic fluorite structure. O₂-TPD of the CeO₂–MnO_x solid solutions showed a large desorption peak in a range of relatively low temperature. The BET surface areas of the CeO₂–MnO_x solid solutions were larger than those of pure CeO₂ and Mn₂O₃. These effects caused by the addition of Mn are responsible for the enhanced activities of the Ba catalysts supported on Ce–Mn mixed oxides.     

Hydrodechlorination of 1,1,2-trichloro-1,2,2-trifluoroethane (CFC-113) over supported ruthenium and other noble metal catalysts

The hydrodechlorination of CCl₂F–CClF₂ (CFC-113) was studied using silica- and activated carbon-supported Ru, Rh, Pd, and Pt catalysts. The activity of the catalysts changed with time-on-stream. Ru was most stable among the four noble metals and gave a simple product distribution yielding CClF=CF₂ (CFC-1113) and CHClF–CClF₂ (HCFC-123a) as main products. Over silica-supported Ru, CFC-1113 yield decreased gradually with time-on-stream but HCFC-123a yield did not change throughout the reaction, suggesting that these products were formed on different sites of Ru. XRD studies and temperature-programmed reduction of the spent catalyst revealed that the deactivation was caused by halogen-containing carbonaceous species accumulated on the Ru surface during the reaction. The carbonaceous species seemed to be formed on the active site for CFC-1113 formation. Because CFC-1113 selectivity was higher over the catalyst having higher Ru dispersion, it was assumed that the hydrodechlorination of CFC-113 is structure-sensitive and CFC-1113 formation is promoted by Ru having highly unsaturated coordination sphere.     

Oxidation of methane over Pd/mixed oxides for catalytic combustion

Palladium catalysts supported on mixed oxides (Pd/Al₂O₃–MO_x; M=Co, Cr, Cu, Fe, Mn, and Ni) were investigated for the low-temperature catalytic combustion of methane. Although the surface area decreased with increasing NiO in Pd/mAl₂O₃–nNiO, Pd/Al₂O₃–36NiO demonstrated an excellent activity due to the small particle size of palladium. Also, the catalytic activity strongly depended on the composition of the support. Temperature-programmed desorption of oxygen revealed that the catalytic activity in the low-temperature region depends on the adsorption state of oxygen on palladium. The activity was enhanced when the amount of adsorbed oxygen increased. In-situ XRD analysis indicated that the PdO phase was thermally stabilized on Pd/Al₂O₃–36NiO.     

Oxides of copper, ceria promoted copper, manganese and copper manganese on Al2O3 for the combustion of CO, ethyl acetate and ethanol

Combustion of CO, ethyl acetate and ethanol was studied over CuO_x/Al₂O₃, CuO_x–CeO₂/Al₂O₃, CuMn₂O₄/Al₂O₃ and Mn₂O₃/Al₂O₃ catalysts. It was found that modification of the alumina with ceria before subsequent copper oxide deposition increases the activity for combustion of CO substantially, but the effect of ceria was small on the combustion of ethyl acetate and ethanol. The activity increases with the CuO_x loading until crystalline CuO particles are formed, which contribute little to the total active surface. The CuO_x–CeO₂/Al₂O₃ catalyst is more active than the CuMn₂O₄/Al₂O₃ catalyst for the oxidation of CO but the CuMn₂O₄/Al₂O₃ catalyst is more active for the combustion of ethyl acetate and ethanol.

Thermal ageing and water vapour in the feed caused a modest decrease in activity and did not affect the CuO_x–CeO₂/Al₂O₃ and CuMn₂O₄/Al₂O₃ catalysts differently. In addition, no difference in intermediates formed over the two catalysts was observed.

Characterisation with XRD, FT-Raman and TPR indicates that the copper oxide is present as a copper aluminate surface phase on alumina at low loading. At high loading, bulk CuO crystallites are present as well. Modification of the alumina with ceria before the copper oxide deposition gives well dispersed copper oxide species and bulk CuO crystallites associated to the ceria, in addition to the two copper oxide species on the bare alumina. The distribution of copper species depends on the ceria and copper oxide loading. The alumina supported copper manganese oxide and manganese oxide catalysts consist mainly of crystalline CuMn₂O₄ and Mn₂O₃, respectively, on Al₂O₃.     

Molecular structure and reactivity of the group V metal oxides

The molecular structures and reactivity of the group V metal oxides (V₂O₅, Nb₂O₅ and Ta₂O₅) were compared. Their solid state structural chemistry, physical and electronic properties, number of active surface sites and their chemical reactivity properties were examined. For the bulk oxides, the solid state structural chemistry and the physical and electronic properties are well established. The number of active surface sites and the distribution of surface redox/acid sites were determined with methanol chemisorption and methanol oxidation, respectively. These studies revealed that the active surface sites present in pure V₂O₅ are primarily redox sites and the active surface sites in pure Nb₂O₅ are essentially acidic in nature. Furthermore, the surface redox sites present in pure V₂O₅ are orders of magnitude more active than the surface acid sites in pure Nb₂O₅. Consequently, the catalytic properties of bulk V₂O₅–Nb₂O₅ mixed oxides are dominated by the vanadia component. For the supported metal oxides, where the group V metal oxides are present as two-dimensional metal oxide overlayers, the structural and electronic properties are not well established in the literature. From a combination of molecular spectroscopic characterization methods (e.g., XANES, Raman, IR and UV–Vis DRS), it was possible to obtain this fundamental information. Methanol chemisorption studies demonstrated that a similar number of active surface sites are present in the supported vanadia and niobia catalyst systems. Similar to their bulk oxides, the surface vanadia species possess redox characteristics and the surface niobia species primarily possess acidic characteristics (Lewis acidity). The surface niobia species was a very sluggish redox site during oxidation reactions (e.g., methanol oxidation to formaldehyde and SO₂ oxidation to SO₃), but significantly promoted the surface vanadia redox sites for oxidation reactions that required dual surface redox and acid sites (e.g., butane oxidation to maleic anhydride and selective catalytic reduction of NO_x by NH₃ to produce N₂). These new fundamental insights are allowing for the molecular engineering of group V metal oxide catalysts (especially vanadia and niobia). In contrast, the molecular structure and reactivity properties of Ta₂O₅ catalysts are not yet established and will require significant research efforts.     

Relative rates of various steps of NO–CH4–O2 reaction catalyzed by Pd/H-ZSM-5

Reaction mechanism of the reduction of nitrogen monoxide by methane in an oxygen excess atmosphere (NO–CH₄–O₂ reaction) catalyzed by Pd/H-ZSM-5 has been studied at 623–703 K in the absence of water vapor, in comparison with the mechanism for Co-ZSM-5. Kinetic isotope effect for the N₂ formation in NO–CH₄–O₂ vs. NO–CD₄–O₂ reactions was 1.65 at 673 K and decreased with a decrease in the reaction temperature. In addition, H–D isotopic exchange took place significantly in NO–(CH₄+CD₄)–O₂ reaction. These results are in marked contrast with the case of Co-ZSM-5, for which the C–H dissociation of methane is the only rate-determining step, and show that the C–H dissociation is slow but not the only rate-determining step in the case of Pd/H-ZSM-5.

A reaction scheme was proposed, in which the relative rates of the three steps ((i)–(iii) below) vary depending on the reaction conditions.

Further, in contrast to Co-ZSM-5, NO_x–CH₄–O₂ reaction was much slower than CH₄–O₂ reaction for Pd/H-ZSM-5; the presence of NO_x retards the reaction of CH₄ over the latter catalyst, while it accelerates the reaction over the former. It is suggested that CH₄ is activated directly by the Pd atoms in the case of Pd/H-ZSM-5, but by NO₂ strongly adsorbed on Co ion for Co-ZSM-5. The reaction order of the NO–CH₄–O₂ reaction with respect to NO pressure was consistent with this mechanism; 1.05 for Pd/H-ZSM-5 and 0.11 for Co-ZSM-5.