Conformationally Constrained Sialyl Analogues as New Potential Binders of h-CD22

Here, two conformationally constrained sialyl analogues were synthesized and characterized in their interaction with the inhibitory Siglec, human CD22 (h-CD22). An orthogonal approach, including biophysical assays (SPR and fluorescence), ligand-based NMR techniques, and molecular modelling, was employed to disentangle the interaction mechanisms at a molecular level. The results showed that the Sialyl-TnThr antigen analogue represents a promising scaffold for the design of novel h-CD22 inhibitors. Our findings also suggest that the introduction of a biphenyl moiety at position 9 of the sialic acid hampers canonical accommodation of the ligand in the protein binding pocket, even though the affinity with respect to the natural ligand is increased. Our results address the search for novel modifications of the Neu5Ac-α(2-6)-Gal epitope, outline new insights for the design and synthesis of high-affinity h-CD22 ligands, and offer novel prospects for therapeutic intervention to prevent autoimmune diseases and B-cell malignancies.     

Light‐triggered reversible solubility of α‐cyclodextrin and azobenzene moiety complexes in PDMAA‐co‐PAPA via molecular recognition

Photoresponsive polymer with azobenzene pendant group (PDMAA‐co‐PAPA) was synthesized by radical polymerization of N,N‐dimethylacrylamide (DMAA) and N‐4‐phenylazophenyl acrylamide (PAPA), and the characterization of the inclusion complexes of the PDMAA‐co‐PAPA with α‐cyclodextrin (α‐CD) were performed by FTIR, GPC, ¹H NMR, 2D NOESY, and UV–vis spectroscopy. It was found that the solubility of PDMAA‐co‐PAPA and α‐CD inclusion complexes in aqueous solution showed tunable property, which could be triggered by alternating UV–vis light irradiation at a certain temperature due to the effect of molecular recognition of α‐CD with azobenzene moiety in the polymer. After UV irradiation, the lower critical solution temperature (LCST) of the polymer aqueous solution increased slightly without α‐CD while the LCST decreased sharply at presence of α‐CD. Furthermore, UV spectroscopy showed that the photoisomerization of the polymer solution went on rapidly and reversibly, and 2D NOESY data suggested that the inclusion complexation of α‐CD with trans azobenzene moiety and the decomplexation with cis azobenzene resulted in reversible solubility behavior when objected to UV and Vis light irradiation alternately. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Importance of N-Glycosylation on CD147 for Its Biological Functions

Glycosylation of glycoproteins is one of many molecular changes that accompany malignant transformation. Post-translational modifications of proteins are closely associated with the adhesion, invasion, and metastasis of tumor cells. CD147, a tumor-associated antigen that is highly expressed on the cell surface of various tumors, is a potential target for cancer diagnosis and therapy. A significant biochemical property of CD147 is its high level of glycosylation. Studies on the structure and function of CD147 glycosylation provide valuable clues to the development of targeted therapies for cancer. Here, we review current understanding of the glycosylation characteristics of CD147 and the glycosyltransferases involved in the biosynthesis of CD147 N-glycans. Finally, we discuss proteins regulating CD147 glycosylation and the biological functions of CD147 glycosylation.     

Synthesis of Erythropoietins Site-Specifically Conjugated with Complex-Type N-Glycans

The biological activity of the glycoprotein hormone erythropoietin (EPO) is dependent mainly on the structure of its N-linked glycans. We aimed to readily attach defined N-glycans to EPO through copper-catalyzed azide alkyne cycloaddition. EPO variants with an alkyne-bearing non-natural amino acid (Plk) at the N-glycosylation sites 24, 38, and 83 were obtained by amber suppression followed by protein purification and refolding. Click conjugation of the alkynyl EPOs with biantennary N-glycan azides provided biologically active site-specifically modified EPO glycoconjugates.     

From a library of MAG antagonists to nanomolar CD22 ligands

Siglec-2, also known as CD22, is involved in the regulation and survival of B-cells and has been successfully targeted in cell depletion therapies with antibody-based approaches. Sialic acid derivatives, already known to bind with high affinity to myelin-associated glycoprotein (MAG, Siglec-4), were screened for their binding affinity for CD22 by surface plasmon resonance. The best compound identified was further modified with various hydrophobic substituents at the 2-, 5-, and 9-positions of the sialic acid scaffold, leading to nanomolar derivatives, of which ligand 17 b shows the most promising pharmacodynamic and pharmacokinetic profiles. Isothermal titration calorimetry measurements demonstrate that the binding is enthalpy driven. Interestingly, the thermodynamic fingerprints reveal an excellent correlation between gains in enthalpy and compensation by increased entropy costs. Moreover, 17 b exhibits a residence time in the range of a few seconds, clearly prolonged relative to residence times typically observed for carbohydrate-lectin interactions. Finally, initial tests regarding drug-like properties of 17 b demonstrate the required high plasma protein binding yet a lack of oral availability, although its distribution coefficient (log D) is in the required range.     

Discovery and Characterization of CD12681, a Potent RORγ Inverse Agonist,Preclinical Candidate for the Topical Treatment of Psoriasis

With possible implications in multiple autoimmune diseases, the retinoic acid receptor‐related orphan receptor RORγ has become a sought‐after target in the pharmaceutical industry. Herein are described the efforts to identify a potent RORγ inverse agonist compatible with topical application for the treatment of skin diseases. These efforts culminated in the discovery of N‐(2,4‐dimethylphenyl)‐N‐isobutyl‐2‐oxo‐1‐[(tetrahydro‐2H‐pyran‐4‐yl)methyl]‐2,3‐dihydro‐1H‐benzo[d]imidazole‐5‐sulfonamide (CD12681), a potent inverse agonist with in vivo activity in an IL‐23‐induced mouse skin inflammation model.     

Novel Quinic Acid Glycerates from Tussilago farfara Inhibit Polypeptide GalNAc-Transferase

The discovery of a bioactive inhibitor tool for human polypeptide N-acetylgalactosaminyl transferases (GalNAc-Ts), the initiating enzyme for mucin-type O-glycosylation, remains challenging. In the present study, we identified an array of quinic acid derivatives, including four new glycerates ( 1 – 4 ) from Tussilago farfara, a traditional Chinese medicinal plant, as active inhibitors of GalNAc-T2 using a combined screening approach with a cell-based T2-specific sensor and purified enzyme assay. These inhibitors dose-dependently inhibited human GalNAc-T2 but did not affect O-linked N-acetylglucosamine transferase (OGT), the other type of glycosyltransferase. Importantly, they are not cytotoxic and retain inhibitory activity in cells lacking elongated O-glycans, which are eliminated by the CRISPR/Cas9 gene editing tool. A structure-activity relationship study unveiled a novel quinic acid-caffeic acid conjugate pharmacophore that directs inhibition. Overall, these new natural product inhibitors could serve as a basis for developing an inhibitor tool for GalNAc-T2.     

Pineapple Lectin AcmJRL Binds SARS-CoV-2 Spike Protein in a Carbohydrate-Dependent Fashion**

The highly glycosylated spike protein of SARS-CoV-2 is essential for infection and constitutes a prime target for antiviral agents and vaccines. The pineapple-derived jacalin-related lectin AcmJRL is present in the medication bromelain in significant quantities and has previously been described to bind mannosides. Here, we performed a large ligand screening of AcmJRL by glycan array analysis, quantified the interaction with carbohydrates and validated high-mannose glycans as preferred ligands. Because the SARS-CoV-2 spike protein was previously reported to carry a high proportion of high-mannose N-glycans, we tested the binding of AcmJRL to the recombinantly produced extraviral domain of spike protein. We could demonstrate that AcmJRL binds the spike protein with a low-micromolar K_D in a carbohydrate-dependent fashion.     

Chiral recognition of enantiomeric isobornyl methacrylate‐containing hydrogels with α‐cyclodextrin

Two enantiomers of isobornyl methacrylate (iBMA) were prepared by reducing (1R,4R)‐(+)‐camphor and (1S,4S)‐(?)‐camphor followed by simple methacrylation reaction. The iBMA enantiomers were incorporated into hydrophilic polymer networks by free radical polymerization with N,N‐dimethylacrylamide and diethylene glycol dimethacrylate at different molar ratios. The influence of α‐cyclodextrin (α‐CD) and randomly methylated β‐cyclodextrin (rβ‐CD), and thereby enantioselectivity, on the swelling behaviour of the enantiomeric networks in water and alcoholic solutions was examined. An increase of swelling was observed on addition of α‐CD and rβ‐CD. While rβ‐CD showed a greater influence on the swelling itself, only α‐CD was able to achieve a minor differentiation between the polymer networks by their enantiomeric components and therefore a chiral recognition of the iBMA moieties. These results were validated using rheological measurements. © 2015 Society of Chemical Industry     

Molecular recognition: polymers comprising isomeric meta‐/para‐isopropylphenol and N‐isopropylacrylamide and their supramolecular complexes with methylated β‐cyclodextrin

We describe the molecular recognition of polymeric attached isomers meta‐isopropylphenol and para‐isopropylphenol, respectively, in a copolymer of N‐isopropylacrylamide (NIPAAm) by use of randomly methylated β‐cyclodextrin (RAMEB‐CD). The acrylic monomers 4‐ and 3‐isopropylphenylacrylate were synthesized and radically copolymerized with NIPAAm yielding the corresponding polymers. The supramolecular structures resulting from complexation with RAMEB‐CD were characterized using dynamic light scattering, turbidity, NMR spectroscopy and isothermal titration. We found differences in binding constant, mean coil size and cloud point as a result of different complexations of the mentioned polymer‐bound isomers with RAMEB‐CD. Copyright © 2012 Society of Chemical Industry     

Synthesis and Performance Evaluation of CO2/N2 Switchable Tertiary Amine Gemini Surfactant

A type of switchable tertiary amine Gemini surfactant, N,N′‐di(N,N‐dimethyl propylamine)‐N,N′‐didodecyl ethylenediamine, was synthesized by two substitution reactions with 3‐chloro‐1‐(N,N‐dimethyl) propylamine, bromododecane and ethylene diamine as main raw materials. The structure of the product was characterized by FTIR and ¹H‐NMR. We also investigated the surface tension when CO₂ was bubbled in different concentrations of surfactant solution and the influence of different CO₂ volumes on surface tension under a constant surfactant concentration. Finally the surface tension curve and the related parameters were acquired by surface tension measurements. The experimental results showed that the structure of the synthesized compounds were in conformity with the expected structure of the surfactant, and displayed a better surface activity after bubbling CO₂. The critical micelle concentration (CMC) surface tension at CMC (γ_cmc) pC₂₀ (negative logarithm of the surfactant's molar concentration C₂₀, required to reduce the surface tension by 20 mN/m) surface excess (Γ_max) at air/solution interface and the minimum area per surfactant molecule at the air/solution interface (A_min) were determined. Results indicate that the target product had good surface activity after bubbling CO₂.     

Synthesis of polymer particles with specific lysozyme recognition sites by a molecular imprinting technique

To prepare silica beads covered with a lysozyme‐imprinted polymer layer, we polymerized acrylamide and acrylic acid or acrylamide and N,N‐dimethylaminopropylacrylamide with (NH₄)₂S₂O₈ in a phosphate buffer containing the lysozyme, surface‐modified silica beads, and crosslinkers; the result was the formation of a polymer layer with a lysozyme recognition site on the silica‐bead surface. By quantitative analysis of the supernatant of the solution containing the silica beads, we confirmed that modified silica beads, in contrast to unmodified silica beads, can selectively adsorb lysozymes. The process of binding and releasing the lysozyme to and from the modified silica beads can be repeated several times without degradation of the rebinding ability. A quartz‐crystal microbalance sensor fabricated with a molecularly imprinted polymer layer with a lysozyme recognition site was prepared. When a lysozyme aqueous solution was added to the solution in which the sensor was immersed, a high level of sensitivity and response was observed. High selectivity was also demonstrated by tests with other protein solutions. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3378–3387, 2001     

Preparation and characterization of a temperature‐sensitive nonwoven poly(propylene) with increased affinity for guest molecules

A temperature‐sensitive hydrogel with the capability of inclusion complex formation with guest molecules was successfully grafted onto the surface of nonwoven polypropylene (nonwoven PP). This was carried out by the use of N‐isopropylacrylamide monomer and a modified cyclodextrin (acrylamidomethyl‐β‐cyclodextrin (β‐CD‐NMA)). Fourier‐transform infra red (FT‐IR) and elemental analyses confirmed the presence of poly(N‐isopropylacrylamide) (PNIPAAm) and β‐CD‐NMA components on the surface of the textile. Equilibrium swelling ratio measurements showed that the grafted hydrogel maintained its temperature‐sensitive property compared to a nongrafted hydrogel. The effect of β‐CD‐NMA and crosslink agent concentrations on the grafting yield was studied. The β‐CD‐NMA content into the PNIPPAM‐ β‐CD‐NMA grafted nonwoven PP (PNIPAAm‐β‐CD‐NMA‐PP) was estimated by FT‐IR through a new procedure. The estimated amounts of β‐CD‐NMA in PNIPAAm‐β‐CD‐NMA‐PP were determined to be 0.9, 1.9 mg g^?1 for 0.019M and 0.049M concentrations of β‐CD‐NMA in monomer solution, respectively. The PNIPAAm‐β‐CD‐NMA‐PP showed a remarkable increase in absorbance affinity of 8‐anilino‐1‐naphthalenesulfonic acid ammonium salt at 20°C from 0.93 to 3.33 µmol g^?1 compared to PNIPAAm‐PP. Furthermore, the results showed a temperature‐sensitive loading affinity for PNIPAAm‐β‐CD‐NMA‐PP in absorbance of guest molecules due to the presence of β‐CD‐NMA. The use of hydrophobic guest molecules such as fragrance oils and antibiotics in modified fabrics can provide new applications in textile and pharmaceutical industry. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40497.     

Reagent residues on N-methylopyrrolidone-treated cotton

Residues remaining after drying and curing cotton fabric with either sodium bisulfate or zinc nitrate and N-methylolpyrrolidone, a monofunctional model durable press agent, have been quantitated by high performance liquid chromatography. The residues were identified as pyrrolidone, N-methylolpyrrolidone, N,N′-methylene-bis-2-pyrrolidone, and N,N′-(oxydimethylene)bis-2-pyrrolidone. The two catalysts fixed approximately the same amount of the N-methylolpyrrolidone to cellulose, but generated different ratios of the extractable residues. A comparison of the levels of these residues that are capable of releasing formaldehyde is given. The dominant residue from the NaHSO₄ treatment was N-methylolpyrrolidone, while zinc nitrate generated more N,N′-(oxydimethylene)bis-2-pyrrolidone.     

Synthesis of β‐cyclodextrin‐based dendrimer as a novel encapsulation agent

The aim was the fabrication of glycodendrimer encapsulation agents with high proportions of cyclodextrins (CDs) to maintain the biocompatibility properties, as well as to notably improve their ability to load various suitably sized drugs. The novel glycodendrimers contained β‐CD in both core and branches, namely β‐cyclodextrin‐based dendrimer (CD‐dendrimer) prepared through a straightforward procedure using S_N2 displacement to attach multivalent β‐CDs together. The desired CD‐dendrimer was synthesized in three steps: (i) reaction of β‐CD with p‐toluenesulfonyl chloride and/or iodine to afford C‐6 mono‐ and/or per‐β‐CD derivative; (ii) reaction of the β‐CD precursors with ethylenediamine to give C‐6 mono‐ and/or per‐amino‐β‐CD derivative; and (iii) S_N2 displacement of β‐CD electrophilic derivative with β‐CD nucleophilic derivative in dimethylsulfoxide to provide the CD‐dendrimer. Then, the encapsulation behaviour of the CD‐dendrimer was examined using naproxen and naltrexone as the guest molecules. The structure of the designed CD‐dendrimer allowed two types of possible sites for encapsulation of the guest: in cavities of the dendritic structure and in hydrophobic cavities of CDs. © 2013 Society of Chemical Industry     

Two‐dimensional regular nanopatterning on block copolymer substrate having lamellar morphology using star‐hyperbranched nanospheres by electrostatic interaction

Hyperbranched polystyrenes (PS) were prepared by living radical photopolymerization of 4‐vinylbenzyl N,N‐diethyldithiocarbamate as an inimer under UV irradiation. The star‐hyperbranched copolymers were derived by grafting from surface N,N‐diethyldithiocarbamate groups of hyperbranched macroinitiator with t‐butyl methacrylate in the presence of N,N‐tetraethylthiuram disulfide. We obtained poly(methacrylic acid) star‐hyperbranched PS nanospheres by hydrolysis of poly(t‐butyl methacrylate)‐grafted chains. We established two‐dimensional (2D) regular nanopatterning by aligning continuously such nanospheres on poly(2‐vinylpyridine) (P2VP) lamellar layers of PS‐block‐P2VP diblock copolymer film. Electrostatic interaction between nanosphere surface having negative charges (? COOCs) and P2VP lamellar layer acted effectively for the 2D nanopattern formation. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4206–4210, 2006     

Surface Activity Properties and Aggregation Behaviors of Partially Fluorinated Gemini Surfactants in Aqueous Solution

The surface activity and aggregation behavior of partially fluorinated gemini surfactant N,N′‐bis(3‐perfluorohexyl‐2‐hydroxypropyl)‐N,N′‐dipropanesulfonylhexylenediamine (N‐6‐Sul) was studied by surface tension, resonance light scattering and fluorescence spectra measurements. The critical micelle concentration (CMC) values obtained by the three methods are in good agreement. The surface activity parameters such as the effectiveness of surface tension reduction (Π_cmc), the maximum surface excess concentration (Γ_max) and the minimum surface area per molecule (A_min) were obtained through surface tension curves. The effects of pH, inorganic salts and temperature on the surface activity were also investigated. The morphology and size of the aggregates of N‐6‐Sul were examined by transmission electron microscopy (TEM). The results show that the partially fluorinated gemini surfactant N‐6‐Sul has many advantages such as high surface activity, low CMC value, great salt tolerance and temperature resistance.     

Second Order Isothermal Desorption Kinetics

A new method is presented to analyze recombinative desorption from surfaces in an isothermal mode. The activation energy for desorption obtained this way is accurate as long as it is coverage independent. Second order recombinative desorption experiments of ¹⁵N₂ and D₂ from Ru(001) were used to demonstrate this method. The activation energies were E _a(N₂) = 48±2 kcal/mol and E _a(D₂) = 22±1 kcal/mol for coverages below 0.1 and 0.2 of saturation coverage, respectively. Studying N/Ru(001) provides evidence for bulk nitrogen atoms that slowly diffuse to the surface leading to isotope scrambling.     

Preparation and sorption studies of β‐cyclodextrin/epichlorohydrin copolymers

β‐Cyclodextrin (β‐CD) copolymer materials were synthesized by reacting different mole ratios (1 : 15, 1 : 25 and 1 : 35) of β‐CD with epichlorohydrin (EP). The products were characterized using N₂ porosimetry, Fourier Transform Infrared spectroscopy, ¹³C CP‐MAS NMR spectroscopy, thermogravimetry analysis, elemental (C and H) analysis, and scanning electron microscopy. The sorption properties in aqueous solution were studied using p‐nitrophenol (PNP) with UV–Vis spectrophotometry. Sorption isotherms were obtained at pH 4.6 and three temperatures (22, 35, and 45°C) and at pH 10.3 at 22°C. The isotherms were analyzed using the BET isotherm model and the sorption parameters provided estimates of the surface area, sorption capacity, and isosteric heats of sorption for each polymeric material. The estimated surface areas are as follows: 58.2, 52.1, and 90.1 m²/g at pH 4.6. At pH 10.3, the estimated surface areas are 44.2, 40.5, and 58.5 m²/g, respectively. The removal efficiency of PNP by the polymeric materials ranged between 4.5 and 58% for the conditions investigated whereas the isosteric heats ranged between ?24.5 and ?13.6 kJ/mol. Removal efficiencies were concluded to strongly depend on the sorption conditions such as pH, temperature, and the relative amounts of sorbent and dye in aqueous solution. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Cell Surface and Functional Features of Cortical Bone Stem Cells

The newly established mouse cortical-bone-derived stem cells (mCBSCs) are unique stem cells compared to mouse mesenchymal stem cells (mMSCs). The mCBSC-treated hearts after myocardial infarction have been reported to have greater improvement in myocardial structure and functions. In this study, we examined the stemness features, cell surface glycan profiles, and paracrine functions of mCBSCs compared with mMSCs. The stemness analysis revealed that the self-renewing capacity of mCBSCs was greater than mMSCs; however, the differentiation capacity of mCBSCs was limited to the chondrogenic lineage among three types of cells (adipocyte, osteoblast, chondrocyte). The cell surface glycan profiles by lectin array analysis revealed that α2-6sialic acid is expressed at very low levels on the cell surface of mCBSCs compared with that on mMSCs. In contrast, the lactosamine (Galβ1-4GlcNAc) structure, poly lactosamine- or poly N-acetylglucosamine structure, and α2-3sialic acid on both N- and O-glycans were more highly expressed in mCBSCs. Moreover, we found that mCBSCs secrete a greater amount of TGF-β1 compared to mMSCs, and that the TGF-β1 contributed to the self-migration of mCBSCs and activation of fibroblasts. Together, these results suggest that unique characteristics in mCBSCs compared to mMSCs may lead to advanced utility of mCBSCs for cardiac and noncardiac repair.