Nano α-Al2O3 Powder Preparation by Calcining an Emulsion Precursor

An experimental study has been conducted to evaluate the formation of nano α-Al₂O₃ under various conditions, such as different calcining temperatures and emulsion ratios of aqueous aluminum nitrate solutions and oleic acid with a high-speed stirring mixer. Four batches of the precursor powders were calcined at three different temperatures of 1000°, 1050°, and 1100°C for 2 h and a terminal product of nano α-Al₂O₃ powders was obtained. The products have been identified by X-ray diffraction (XRD), specific surface area measurement scanning electron microscope, and transmission electron microscope (TEM). The XRD results show that the phase of powders is determined to be α-Al₂O₃, indicating that the overall process has been effective. The optimum calcination temperature of the precursor powder for crystallization of nano α-Al₂O₃ was found to be 1000°C for 2 h. The TEM image indicates that the particle grains have a sub-spherical shape with a mean size of 50–100 nm.     

Synthesis of AlN Nanopowder from γ-Al2O3 by Reduction–Nitridation in a Mixture of NH3–C3H8

Aluminum nitride (AlN) powders were synthesized by gas reduction–nitridation of γ-Al₂O₃ using NH₃ and C₃H₈ as the reactant gases. AlN was identified in the products synthesized at 1100°–1400°C for 120 min in the NH₃–C₃H₈ gas flow confirming that AlN can be formed by the gas reduction–nitridation of γ-Al₂O₃. The products synthesized at 1100°C for 120 min contained unreacted γ-Al₂O₃. The ²⁷A1 MAS NMR spectra show that Al–N bonding in the product increases with increasing reaction temperature, the tetrahedral AlO₄ resonance decreasing prior to the disappearance of the octahedral AlO₆ resonance. This suggests that the tetrahedral AlO₄ sites of the γ-Al₂O₃ are preferentially nitrided than the AlO₆ sites. AlN nanoparticles were directly formed from γ-Al₂O₃ at low temperature because of this preferred nitridation of AlO₄ sites in the reactant. AlN nanoparticles are formed by gas reduction–nitridation of γ-Al₂O₃ not only because the reaction temperature is sufficiently low to restrict grain growth, but also because γ-Al₂O₃ contains both AlO₄ and AlO₆ sites, by contrast with α-Al₂O₃ which contains only AlO₆.     

Synthesis of Nanocrystalline Aluminum Nitride by Nitridation of δ-Al2O3 Nanoparticles in Flowing Ammonia

Nanocrystalline aluminum nitride (AlN) with surface area more than 30 m²/g was synthesized by nitridation of nanosized δ-Al₂O₃ particles using NH₃ as a reacting gas. The resulting powders were characterized by CHN elemental analysis, X-ray diffraction (XRD), Fourier transform infrared spectra, X-ray photoelectron spectra, field-emission scanning electron microscopy, transmission electron microscopy, and Brunauer–Emmett–Teller surface area techniques. It was found that nanocrystalline δ-Al₂O₃ was converted into AlN completely (by XRD) at 1350°–1400°C within 5.0 h in a single-step synthesis process. The complete nitridation of nanosized alumina at relatively lower temperatures was attributed to the lack of coarsening of the initial δ-Al₂O₃ powder. The effect of precursor powder types on the conversion was also investigated, and it was found that α-Al₂O₃ was hard to convert to AlN under the same conditions.     

Growth of Tabular α-Al2O3 Grains on Porous Alumina Substrate

Gradient, porous alumina ceramics were prepared with the characteristics of microsized tabular α-Al₂O₃ grains grown on a surface with a fine interlocking feature. The samples were formed by spin-coating diphasic aluminosilicate sol on porous alumina substrates. The sol consisted of nano-sized pseudo-boehmite (AlOOH) and hydrolyzed tetraethyl orthosilicate [Si(OC₂H₅)₄]. After drying and sintering at 1150°–1450°C, the crystallographic and chemical properties of the porous structures were investigated by analytical electron microscopy. The results show that the formation of tabular α-Al₂O₃ grains is controlled by the dissolution of fine Al₂O₃ in the diphasic material at the interface. The nucleation and growth of tabular α-Al₂O₃ grains proceeds heterogeneously at the Al₂O₃/glass interface by ripening nano-sized Al₂O₃ particles.     

Reinvestigation of Al–Si Spinel Phase in Diphasic Al2O3–SiO2 Gel

Mechanical mixture of γ-Al₂O₃ and amorphous SiO₂, and diphasic Al₂O₃/SiO₂ gels of three different compositions were synthesized. They were subjected to heat treatment to various temperatures in the range 900°–1600°C. Qualitative X-ray diffraction data show that these diphasic gels do not crystallize to a combined mixture of θ-Al₂O₃ and α-Al₂O₃ polymorphs at the intermediate stage, prior to mullite formation. Estimated mullite formation data show that the course of its formation from mixed oxides was different from that of diphasic gels. Results are compared with previous findings and the concept of Al–Si spinel formation in the phase transformation of stoichiometric diphasic gel system is substantiated.     

Growth of Single-Crystal and Polycrystalline Thin Films of MgAl2O4 and MgFe2O4

Single-crystal and polycrystalline films of Mg-Al₂O₄ and MgFe₂O₄ were formed by two methods on cleavage surfaces of MgO single crystals. In one procedure, aluminum was deposited on MgO by vacuum evaporation. Subsequent heating in air at about 510°C formed a polycrystalline γ-Al₂O₈ film. Above 540°C, the γ-Al₂O, and MgO reacted to form a single-crystal MgAl₂O₄ film with {001} MgAl₂O₄‖{001} MgO. Above 590°C, an additional layer of MgAl₂O₄, which is polycrystalline, formed between the γ-Al₂O₃ and the single-crystal spinel. Polycrystalline Mg-Al₂O₄ formed only when diffusion of Mg²⁺ ions proceeded into the polycrystalline γ-Al₂O₃ region. Corresponding results were obtained for Mg-Fe₂O₄. MgAl₂O₄ films were also formed on cleaved MgO single-crystal substrates by direct evaporation, using an Al₂O₃ crucible as a source. Very slow deposition rates were used with source temperatures of ∼1350°C and substrate temperatures of ∼800°C. Departures from single-crystal character in the films may arise through temperature gradients in the substrate.     

Nanocrystalline α-Al2O3 Using Sucrose

Nanocrystalline α-Al₂O₃ ceramic powders have been prepared from an aqueous solution of aluminum nitrate and sucrose. Soluble Al ion-sucrose solution forms the precursor material once it is completely dehydrated. Heat treatment of the dehydrated precursors at low temperature (600°C) results in the formation of porous single-phase α-Al₂O₃. The precursor and heat-treated powders have been characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and BET surface area analysis. The phase-pure nanocrystalline α-Al₂O₃ particles had an average specific surface area of >190 m²/g, with an average pore size between 18 and 25 nm.     

Low-Temperature High-Pressure Consolidation of Amorphous Al2O3–15 mol% Y2O3

This study examined pressure consolidation of amorphous Al₂O₃–15 mol% Y₂O₃ powders prepared by co-precipitation and spray pyrolysis. The two amorphous powders had similar true densities and crystallization sequences. Uniaxial hot pressing was carried out at 450°–600°C with a moderate pressure of 750 MPa. The co-precipitated powder could be hot pressed to a maximum relative density of 98% and remained amorphous. Pressure adversely affected the densification of the spray-pyrolyzed powder by favoring an early crystallization of γ-Al₂O₃ phase at 580°C. Plastic deformation of the amorphous phase is believed to be responsible for the large densification of the amorphous powders.     

Influence of Cr and Fe on Formation of α-Al2O3 from γ-Al2O3

The effect of Cr and Fe in solid solution in γ-Al₂O₃ on its rate of conversion to α-Al₂O₃ at 1100°C was studied by X-ray diffraction. The δ form of Al₂O₃ was the principal intermediate phase produced from both pure γ-Al₂O₃ and that containing Fe³⁺ in solid solution, although addition of Fe greatly reduced crystallinity. Reflectance spectra and magnetic susceptibilities showed that Cr exists as Cr⁶⁺ in γ-Al₂O₃ and as Cr³⁺ in α-Al₂O₃, with θ-Al₂O₃ as the intermediate phase. The intermediates formed rapidly, and the rates of their conversion to α-Al₂O₃ were increased by 2 and 5 wt% additions of Fe and decreased by 2 and 4 wt% additions of Cr. An approximately linear relation observed between α-Al₂O₃ formation and decrease in specific surface area was only slightly affected by the added ions. This relation can be explained by a mechanism in which the sintering of δ- or θ-Al₂O₃, within the aggregates of their crystallites, is closely coupled with conversion of cubic to hexagonal close packing of O^2- ions by synchro-shear.     

Transformation, Microstructure Development, and Densification in α-Fe2O3-Seeded Boehmite-Derived Alumina

Addition of α-Fe₂O₃ seed particles to alkoxide-derived boehmite sols resulted in a 10-fold increase in isothermal rate constants for the transformation of γ- to α-Al₂O₃. Changes in porosity and surface area with sintering temperature showed no effect of seeding on coarsening of the transition alumina gels, but the 200-fold decrease in surface area associated with transformation to α-Al₂O₃ occurred ∼ 100°C lower in seeded gels compared with unseeded materials. As a result of high nucleation frequency and reduced microstructure coarsening, fully transformed seeded alumina retained specific surface areas >22 m²/g and exhibited narrow pore size distributions, permitting development of fully dense, submicrometer α-Al₂O₃ at ∼ 1200°C.     

Microcellular Al2O3 Ceramics from Wood for Filter Applications

Microcellular biomorphous Al₂O₃ was produced by Al-vapor infiltration in pyrolyzed rattan and pine wood-derived biocarbon preforms. At 1600°C the biocarbon preforms reacted with gaseous aluminum to form Al₄C₃. After oxidation in air at temperatures between 1550° and 1650°C, for 3 h, the biocarbon preforms were fully converted into α-Al₂O₃. Owing to the high anisotropy of biomorphous Al₂O₃, the compressive strength behavior was strongly dependent on the loading direction. The compressive strength of the specimens (0.1–11 MPa) is strongly dependent on their overall porosity and their behavior could be explained using the Gibson–Ashby model. The Darcian permeability ( k ₁), as well as the non-Darcian permeability ( k ₂), increased with an increase of the total porosity. The Darcian permeability of biomorphous Al₂O₃ was found to be in the range of 1–8 × 10⁻⁹ m², which is in the order of magnitude of gas filters, and, therefore, suitable for several technological applications.     

Properties of Sm2O3─Al2O3─SiO2 Glasses for In Vivo Applications

The compositional range for glass formation below 1600°C in the Sm₂O₃─Al₂O₃─SiO₂ system is (9–25)Sm₂O₃─(10–35)Al₂O₃─(40–75)SiO₂ (mol%). Selected properties of the Sm₂O₃─Al₂O₃─SiO₂ (SmAS) glasses were evaluated as a function of composition. The density, refractive index, microhardness, and thermal expansion coefficient increased as the Sm₂O₃ content increased from 9 to 25 mol%, the values exceeding those for fused silica. The dissolution rate in 1 N HCl and in deionized water increased with increasing Sm₂O₃ content and with increasing temperature to 70°C. The transformation temperature ( T _g ) and dilatometric softening temperature ( T _d ) of the SmAS glasses exceeded 800° and 850°C, respectively.     

Microstructure, Conductivity, and NO2 Sensing Characteristics of α-Al2O3-Doped (8 mol% Sc2O3)ZrO2 Composite Solid Electrolyte

α-Al₂O₃-doped (8 mol % Sc₂O₃)ZrO₂ composite solid electrolyte has been investigated in the fabrication of solid-state ceramic gas sensors. The microstructure and electrical conductivity of the composite solid electrolyte have been measured over a range of temperature from 240°C to 596°C. The composite solid electrolyte has been found to exhibit a higher conductivity compared with the commonly used (8 mol% Y₂O₃)ZrO₂ at temperatures above ∼448°C. The sensing characteristics for NO₂ detection have been studied in the temperature range of 500–650°C at the low concentration from 10 to 30 ppm and at high concentration from 100 to 500 ppm of NO₂. The NO₂ sensor was found to respond reproducibly and rapidly to the variations of NO₂, concentration, indicating that the composite solid electrolyte has promising application as a solid electrolyte for on-board exhaust gas monitoring.     

Effect of Seeding and Water Vapor on the Nucleation and Growth of α-Al2O3 from γ-Al2O3

Isothermal transformation kinetics and coarsening rates were studied in unseeded and alpha-Al₂O₃-seeded γ-Al₂O₃ powders heated in dry air and water vapor. Unseeded samples heated in dry air transformed to alpha-Al₂O₃ with an activation energy of 567 kJ/mol. Seeding with alpha-Al₂O₃ increased the transformation rates and reduced incubation times by providing low-energy sites for nucleation/growth of the alpha-Al₂O₃ transformation. The activation energy for the transformation was reduced to 350 kJ/mol in seeded samples heated in dry air. Seeded samples completely transformed to alpha-Al₂O₃ after 1 h at 1050°C when heated in dry air compared to 1 h at 925°C when heated in saturated water vapor. The combined effects of a lower nucleation barrier due to seeding and the increased diffusion due to water vapor reduced the activation energy for the transformation by 390 kJ/mol and the transformation temperature by ∼225°C compared to the unseeded samples heated in dry air. The accelerated kinetics is believed to be due to increased surface diffusion.     

TEM Characterization of Nanostructured MgAl2O4 Synthesized by a Direct Conversion Process from γ-Al2O3

Nanostructured MgAl₂O₄ spinel was synthesized by a direct conversion process from cubic γ-Al₂O₃. The effect of post-annealing temperature (300°, 500°, and 800°C) on MgAl₂O₄ phase formation was investigated using transmission electron microscopy, selected area electron diffraction (SAED), electron energy loss spectroscopy (EELS), and energy-dispersive spectroscopy (EDS). Relative diffraction intensities as well as lattice parameter measurements from SAED revealed that MgAl₂O₄ spinel structure starts forming at temperatures as low as 300°C. EELS and EDS spectrum images also revealed an increase in elemental homogeneity with increasing annealing temperature. The degree of ordering of Mg and Al between octahedral and tetrahedral sites has been determined from relative diffraction intensities. Results show that annealing to 800°C leads to a spinel phase with an order parameter of 0.78.     

Subsolidus Phase Relations in the Ga2O3-In2O3-SnO2 System

Subsolidus phase relationships in the Ga₂O₃–In₂O₃–SnO₂ system were studied by X-ray diffraction over the temperature range 1250–1400°C. At 1250°C, several phases are stable in the ternary system, including Ga₂O₃( ss ), In₂O₃( ss ), SnO₂, Ga_{3− x} In_{5+ x} Sn₂O₁₆, and several intergrowth phases that can be expressed as Ga_{4−4 x} In_{4 x} Sn _{n −4}O_{2 n −2} where n is an integer. An In₂O₃–SnO₂ phase and Ga₄SnO₈ form at 1375°C but are not stable at 1250°C. GaInO₃ did not form over the temperature range 1000–1400°C.     

Conversion from β-Ce2O3·11Al2O3 to α-Al2O3 in Tetragonal ZrO2 Matrix

Composites of β-Ce₂O₃·11Al₂O₃ and tetragonal ZrO₂ were fabricated by a reductive atmosphere sintering of mixed powders of CeO₂, ZrO₂ (2 mol% Y₂O₃), and Al₂O₃. The composites had microstructures composed of elongated grains of β-Ce₂O₃·11Al₂O₃ in a Y-TZP matrix. The β-Ce₂O₃·11Al₂O₃ decomposed to α-Al₂O₃ and CeO₂ by annealing at 1500°C for 1 h in oxygen. The elongated single grain of β-Ce₂O₃·11Al₂O₃ divided into several grains of α-Al₂O₃ and ZrO₂ doped with Y₂O₃ and CeO₂. High-temperature bending strength of the oxygen-annealed α-Al₂O₃ composite was comparable to the β-Ce₂O₃·11Al₂O₃ composite before annealing.     

Lowering Crystallization Temperatures by Seeding in Structurally Diphasic Al2O3-MgO Xerogels

Thermal reactions in 93% Al₂O₃-7% MgO and 95.8% Al₂O₃-4.2% MgO gels seeded with α-Al₂O₃, MgAl₂O₄, α-Fe₂O₃, and SiO₂, sols were investigated by differential thermal analysis to determine the extent of nucleation catalysis of solid-state reactions. Seeding with α-Al₂O₃ lowered the α-Al₂O₃ crystallization temperature in these xerogels by 100° to 150°C. Spinel seeds have much less effect on the γ-α transition, and α-Fe₂O₃ and SiO₂ seeds do not affect it significantly. Isostructural seeding of gels may therefore permit lower ceramic processing temperatures.     

Structure and Properties of Low Phonon Antimony Glasses in the K2O–B2O3–Sb2O3–ZnO System

The monolithic glass-forming region of the low phonon and low softening point antimony glasses containing high Sb₂O₃ (40–75 mol%) in the novel quaternary K₂O–B₂O₃–Sb₂O₃–ZnO system has been found with the help of X-ray diffraction (XRD) analysis. The structure of a series of glasses with the general composition of (mol%) 15K₂O–15B₂O₃–(70− x )Sb₂O₃– x ZnO (where x =5–25) has been evaluated by infrared reflection spectral (FT-IRRS) analyses. All the glasses are found to possess a low phonon energy of around 600 cm⁻¹, as revealed by FT-IRRS. Their softening point ( T _s), glass transition temperature ( T _g), and coefficient of thermal expansion (CTE) have been found to vary in the ranges of 351°–379°C, 252°–273°C, and 195–218 × 10⁻⁷ K⁻¹, respectively. These properties are found to be controlled by their fundamental property, like the covalent character of the glasses, which is found to increase with an increase in Sb₂O₃ content. In addition, the devitrified glasses have been characterized by XRD and field emission scanning electron microscopy, which manifests the presence of nanozinc antimony oxide crystals with sizes of 21–43 nm. The exhibited properties have revealed that they are a new class of versatile materials.     

Chemical Vapor Deposition of Polycrystalline Al2O3

Polycrystalline Al₂O₃ was chemically vapor-deposited onto sintered Al₂O₃ substrates by reaction of AlCl₃ with (1) H₂O, (2) CO:H₂, and (3) O₂ at 1000° and 1500°C and 0.5 and 5.0 torr. Although the thermodynamics of all these reactions predict the formation of solid Al₂O₃, the deposition rate of the first reaction was considerably greater than that of the second. The third reaction was so slow that no measurable deposit was formed in 6 h at 1500°C. Formation of dense deposits of α-Al₂O₃ was favored by increasing temperature and decreasing pressure. Microstructural examination of the dense deposits showed long columnar grains, the largest of which extended through the deposit from the substrate to the surface.