Effect of some factors and pretreatment on the properties of porcine plasma protein-based films

The properties of porcine plasma protein-based films as influenced by some factors and pretreatment were studied. Both protein concentrations (20 and 30 g L⁻¹) and glycerol contents (50, 60 and 70 g/100 g protein) had the impact on film properties. Film prepared from film-forming solution (FFS) containing protein (30 g L⁻¹) and glycerol (60 g/100 g protein) possessed the highest tensile strength (TS) (2.48 MPa), while that containing protein (30 g L⁻¹) and glycerol (70 g/100 g protein) exhibited the greatest elongation at break (EAB) (18.33%). Protein and glycerol contents affected water vapor permeability (WVP) and transparency of the resulting films. No differences in protein solubility were found among all films (p > 0.05). Pretreatment of FFS by adjusting pH (2-11) and heating at different temperatures (40, 55 and 70 °C) on the properties of the resulting films was investigated. TS and EAB became higher but WVP decreased with decreasing or increasing pH value of FFS. Heat treatment of FFS with pH 3 and 10 had no impact on TS of the resulting film (p > 0.05). On the other hand, EAB and WVP increased with increasing temperature of FFS at both pHs (p < 0.05).     

Effect of heat treatment of film-forming solution on the properties of film from cuttlefish (Sepia pharaonis) skin gelatin

Effects of heat treatment at different temperatures (40–90 °C) of film-forming solution (FFS) containing 3% gelatin from cuttlefish (Sepia pharaonis) ventral skin and 25% glycerol (based on protein) on properties and molecular characteristics of resulting films were investigated. The film prepared from FFS heated at 60 and 70 °C showed the highest tensile strength (TS) with the highest melting transition temperature (T_max) (p < 0.05). Nevertheless, film from FFS heated at 90 °C had the highest elongation at break (EAB) with the highest glass transition temperature (T_g) (p < 0.05). With increasing heating temperatures, water vapor permeability (WVP) of films decreased (p < 0.05), but no differences in L*-value and transparency value were observed (p > 0.05). Based on FTIR spectra, the lower formation of hydrogen bonding was found in film prepared from FFS with heat treatment. Electrophoretic study revealed that degradation of gelatin was more pronounced in FFS and resulting film when heat treatment was conducted at temperature above 70 °C. Thus, heat treatment of FFS directly affected the properties of resulting films.     

Properties of film from cuttlefish (Sepia pharaonis) skin gelatin incorporated with cinnamon,clove and star anise extracts

Properties of film from cuttlefish (Sepia pharaonis) ventral skin gelatin without and with partial hydrolysis (1.2% degree of hydrolysis) incorporated with 1% ethanolic extract of cinnamon (CME), clove (CLE) and star anise (SAE) were determined. Films with different herb extracts (without and with oxidation) had higher tensile strength (TS) but lower elongation at break (EAB), compared with the control film (without addition of herb extracts) (p < 0.05). Lower water vapor permeability (WVP) and L^∗-value but higher b^∗- and ΔE^∗-values were observed when the extracts were incorporated (p < 0.05). Electrophoretic study revealed that cross-linking was pronounced in films containing different herb extracts. Oxidized extracts yielded films with higher TS and WVP than those without oxidized herb extracts (p < 0.05). Generally, similar properties were noticeable for films from gelatin with and without partial hydrolysis. Nevertheless, higher mechanical properties were obtained for the latter. FTIR spectra indicated that protein–polyphenol interactions were involved in the film. Thermo-gravimetric analysis revealed that films incorporated with SAE or SAE with oxidation (OSAE) exhibited lower heat susceptibility and weight loss in the temperature range of 50–600 °C, compared with control film. Films with SAE and OSAE had smoother surface for gelatin without hydrolysis; however, coarser surface was observed in film from gelatin with partial hydrolysis. Thus, the incorporation of different herb extracts directly affected the properties of film from cuttlefish skin gelatin with and without hydrolysis.     

Effects of partial hydrolysis and plasticizer content on the properties of film from cuttlefish (Sepia pharaonis) skin gelatin

Properties of film from cuttlefish (Sepia pharaonis) ventral skin gelatin with different degree of hydrolysis (DH: 0.40, 0.80 and 1.20%) added with glycerol as plasticizer at various levels (10, 15 and 20%, based on protein) were investigated. Films prepared from gelatin with all DH had the lower tensile strength (TS) and elongation at break (EAB) but higher water vapor permeability (WVP), compared with the control film (without hydrolysis) (p < 0.05). At the same glycerol content, both TS and EAB decreased, while WVP increased (p < 0.05) with increasing %DH. At the same DH, TS generally decreased as glycerol content increased (p < 0.05), however glycerol content had no effect on EAB when gelatins with 0.80 and 1.20% DH were used (p > 0.05). DH and glycerol content had no marked impact on color and the difference in color (ΔE^∗) of resulting films. Electrophoretic study revealed that degradation of gelatin and their corresponding films was more pronounced with increased %DH, resulting in the lower mechanical properties of films. Based on FTIR spectra, with the increasing %DH as well as glycerol content, higher amplitudes for amide-A and amide-B peaks were observed, compared with film from gelatin without hydrolysis (control film) due to the increased –NH₂ group caused by hydrolysis and the lower interaction of –NH₂ group in the presence of higher glycerol. Thermo-gravimetric analysis indicated that film prepared from gelatin with 1.20% DH exhibited the higher heat susceptibility and weight loss in the temperature range of 50–600 °C, compared with control film. Thus, both chain length of gelatin and glycerol content directly affected the properties of cuttlefish skin gelatin films.     

Effects of hydrogen peroxide and Fenton’s reagent on the properties of film from cuttlefish (Sepia pharaonis) skin gelatin

Properties of film from cuttlefish (Sepia pharaonis) ventral skin gelatin without and with partial hydrolysis (1.2% degree of hydrolysis), as influenced by H₂O₂ and Fenton’s reagent at different levels, were investigated. Films treated with H₂O₂ (0.01–0.04 M) and Fenton’s reagent [H₂O₂ (0.01–0.04 M) + FeSO₄ (0.001–0.004 M)] had higher tensile strengths (TS) but similar or lower elongations at break (EAB), compared with the control film (p < 0.05). Slight differences in water vapour permeability (WVP) were observed for all films. Films treated with Fenton’s reagent had a lower L^∗-value but higher a^∗-, b^∗- and ΔE^∗-values, while films treated with H₂O₂ had lower b^∗-values (p < 0.05), than had the control film. Cross-linking was pronounced in films treated with H₂O₂ or Fenton’s reagent and was associated with increased heat stability. Films treated with Fenton’s reagent had the lowest solubility in water (p < 0.05). However, fragmentation more likely took place when Fenton’s reagent (at a higher level) was used. Generally, similar results were noticeable between films from gelatin with and without partial hydrolysis. Thus, H₂O₂ and Fenton’s reagent directly affected the properties of film from cuttlefish skin gelatin, regardless of hydrolysis.     

Properties of a protein-based film from round scad (Decapterus maruadsi) as affected by muscle types and washing

The effects of muscle types and washing on the properties of a protein-based film from round scad (Decapterus maruadsi) mince were investigated. Washing resulted in an increase in the protein content with a coincidental decrease in the fat content of mince, especially from whole muscle and dark muscle. Among all types of muscle (ordinary, dark and whole muscle), the ordinary muscle rendered the film with the highest tensile strength (TS) (p < 0.05). TS of films from washed mince was greater than that of films prepared from unwashed mince for the same type of muscle used (p < 0.05). Nevertheless, the water vapour permeability (WVP) of films from unwashed mince was higher than that of films prepared from washed mince (p < 0.05). Films from washed mince had higher solubility but lower protein solubility than those from unwashed mince (p < 0.05). Regardless of washing, films from ordinary muscle showed the highest L^∗-value (p < 0.05). However, films prepared from dark muscle were more yellowish than those prepared from other muscles, as evidenced by the greater b^∗-value. Films from round scad mince and washed mince had excellent barrier properties to UV light at the wavelength of 200–280 nm. Generally, films from round scad mince had a lower preventive effect on visible light transmission than had those from unwashed mince. Among films from all muscles, those prepared from dark muscle exhibited the highest barrier to visible light transmission (p < 0.05). Therefore, the properties of films from round scad meat were governed by muscle type as well as by washing.     

Round scad protein-based film: Storage stability and its effectiveness for shelf-life extension of dried fish powder

Storage stability of different round scad (Decapterus maruadsi) protein-based films including (1) control film without palm oil and chitosan, (2) film with 25% palm oil (glycerol substitution) and (3) film with 25% palm oil and 40% chitosan (protein substitution) was investigated. During storage (54% relative humidity, 28-30 °C), tensile strength (TS) of the films without and with 25% palm oil or 25% palm oil in combination with 40% chitosan increased continuously, while elongation at break (EAB) decreased markedly when storage time increased up to 8 weeks (p < 0.05). No changes in water barrier properties were observed throughout the storage time up to 4 weeks (p > 0.05). Film solubility slightly increased but protein solubility decreased continuously during storage (p < 0.05). All films became darker and more yellowish as storage time increased. When round scad muscle protein-based films were used to cover dried fish powder, the samples covered with the film containing 25% palm oil and 40% chitosan showed lower thiobarbituric acid reactive substances (TBARS) and yellowness than other samples during the extended storage up to 21 days (p < 0.05). No differences in moisture content of all samples covered with different films were noticeable (p > 0.05), except those covered with HDPE, which had the lowest moisture content. Thus, round scad protein-based film incorporated with palm oil and chitosan could be a promising packaging material to prevent lipid oxidation in oil enriched foods.     

Roles of lipid oxidation and pH on properties and yellow discolouration during storage of film from red tilapia (Oreochromis niloticus) muscle protein

Protein-based films prepared from red tilapia (Oreochromis niloticus) washed and unwashed mince solubilised at pH 3 and 11 were prepared and characterised. Tensile strength (TS) of films from washed mince was greater than that of films prepared from unwashed mince for both pH used (P < 0.05). TS of films prepared at pH 3 was higher than that of films prepared at pH 11 for both of washed and unwashed mince (P < 0.05). Film from washed mince with pH 3 showed the highest TS, while that from unwashed mince with pH 11 had the lowest TS with the highest elongation at break (EAB) (P < 0.05). Films from washed mince had the lower value of thiobarbituric acid reactive substances (TBARS) than did those from unwashed counterpart, regardless of pH used. Nevertheless, TBARS was much higher in films prepared at acidic pH, compared with those prepared at alkaline pH. During storage of 20 days at room temperature, films became yellowish as evidenced by the increases in b^∗ and ΔE^∗-values. Films prepared at pH 11 showed the higher b^∗ and ΔE^∗-values than did those prepared at pH 3, especially for those from unwashed mince. However, films prepared from washed mince at pH 3 showed higher b^∗ and ΔE^∗-values than did those prepared at pH 11 (P < 0.05). Films generally had the increase in TS but the decreases in water vapour permeability (WVP), film solubility and protein solubility after 20 days of storage (P < 0.05). Therefore, lipid oxidation more likely played a role in yellow discolouration of fish muscle protein film, mainly by providing the carbonyl groups involved in Maillard reaction, while pH regulated the rate of reaction.     

Properties and antioxidant activity of fish skin gelatin film incorporated with citrus essential oils

Properties of protein-based film from fish skin gelatin incorporated with different citrus essential oils, including bergamot, kaffir lime, lemon and lime (50% based on protein) in the presence of 20% and 30% glycerol were investigated. Films containing 20% glycerol had higher tensile strength (TS) but lower elongation at break (EAB), compared with those prepared with 30% glycerol, regardless of essential oils incorporated (p < 0.05). Films incorporated with essential oils, especially from lime, at both glycerol levels showed the lower TS but higher EAB than the control films (without incorporated essential oil) (p < 0.05). Water vapour permeability (WVP) of films containing essential oils was lower than that of control films for both glycerol levels (p < 0.05). Films with essential oils had varying ΔE^* (total colour difference), where the highest value was observed in that added with bergamot essential oil (p < 0.05). Higher glycerol content increased EAB and WVP but decreased TS of films. Fourier transforms infrared (FTIR) spectra indicated that films added with essential oils exhibited higher hydrophobicity with higher amplitude at wavenumber of 2874–2926 cm⁻¹ and 1731–1742 cm⁻¹ than control film. Film incorporated with essential oils exhibited slightly lower thermal degradation resistance, compared to the control film. Varying effect of essential oil on thermal degradation temperature and weight loss was noticeable, but all films prepared using 20% glycerol had higher thermal degradation temperature with lower weight loss, compared with those containing 30% glycerol. Films added with all types of essential oils had rough cross-section, compared with control films, irrespective of glycerol levels. However, smooth surface was observed in all film samples. Film incorporated with lemon essential oil showed the highest ABTS radical scavenging activity and ferric reducing antioxidant power (FRAP) (p < 0.05), while the other films had lower activity. Thus, the incorporation of different essential oils and glycerol levels directly affected the properties of gelatin-based film from fish skin.     

Effect of tannic acid and kiam wood extract on lipid oxidation and textural properties of fish emulsion sausages during refrigerated storage

Effect of tannic acid (0.02% and 0.04%) and ethanolic kiam wood extract (EKWE) (0.04% and 0.08%) on lipid oxidation and textural properties of fish emulsion sausages during 20 days of refrigerated storage was investigated. Control samples (C) had the highest peroxide value (PV) and thiobarbituric acid-reactive substances (TBARS) value up to day 16 and 8 of storage, respectively. With the addition of tannic acid and EKWE, PV and TBARS values in the sausages were retarded effectively, compared to the control (P < 0.05), especially when the tannic acid and EKWE at higher level were used. At the same level, EKWE showed the lower ability in retarding the lipid oxidation, in comparison with tannic acid. Tannic acid at both levels (0.02% and 0.04%) was also effective in retarding the formation of fishy odour in the samples throughout the storage, compared to the control and EKWE treated samples (P < 0.05). Both tannic acid and EKWE had no detrimental effect on the sensory attributes of sausages. However, EKWE treated sample had lower L^∗ and higher a^∗ and ΔE^∗ values, compared to the control samples (P < 0.05). After 20 days of storage, the sample added with 0.04% tannic acid had higher hardness, gumminess and chewiness, compared with others (P < 0.05). Samples added with 0.04% tannic acid also displayed more compact structure with no visible voids. Furthermore, oil droplets with smaller size were dispersed more uniformly, compared to others. Thus, tannic acid (0.02% and 0.04%) and EKWE (0.08%) were effective in retarding lipid oxidation and fishy odour development as well as could maintain the textural properties of fish emulsion sausages during the refrigerated storage of 20 days.     

Properties of biodegradable blend films based on fish myofibrillar protein and polyvinyl alcohol as influenced by blend composition and pH level

Effects of the ratios of fish myofibrillar protein (FMP) from bigeye snapper (Priacanthus tayenus) to polyvinyl alcohol (PVA) (FMP:PVA; 10:0, 8:2, 6:4, 5:5, 4:6, 2:8, 0:10) and pH levels (3 and 11) on the properties of resulting films were investigated. Both tensile strength (TS) and elongation at break (EAB) of films increased with increasing PVA content (p < 0.05). When PVA was incorporated up to 40%, films prepared at pH 11 had the higher TS than did those prepared at pH 3 (p < 0.05). However, as PVA content was greater than 40%, films prepared at pH 3 exhibited the higher TS than did those prepared at pH 11 (p < 0.05). Water vapor permeability (WVP) of the films prepared at pH 3 increased when PVA content increased up to 40% and decreased with further increases in PVA content (p < 0.05). PVA films had the higher TS, EAB and WVP than did FMP films and FMP/PVA blend films prepared at both pHs. Films exhibited the increased L∗ and a∗ values but decreased b∗ value with increasing PVA content at both pHs. Films prepared at pH 11 showed higher b∗ value than did those prepared at pH 3 when PVA content was greater than 40% (p < 0.05). FMP/PVA blend films exhibited the negligible transmission to the UV light. At pH 3, light transmission of the films increased as PVA content increased (p < 0.05). At all FMP/PVA ratios, films prepared at pH 11 were less transparent than those prepared at pH 3 (p < 0.05). Therefore, blend composition and pH level influenced the properties of FMP/PVA blend films.     

The effect of myofibrillar/sarcoplasmic protein ratios on the properties of round scad muscle protein based film

The effect of the ratios of myofibrillar protein (MP) to sarcoplasmic protein (SP) from round scad (Decapterus maruadsi) muscle on the properties of the resulting films was investigated. Tensile strength (TS) of films decreased with increasing SP content (p < 0.05). Films prepared from MP/SP ratio of 10:0 (w/w) exhibited the highest TS (p < 0.05). Elongation at break (EAB) of films prepared with SP content greater than 30% had the decreased EAB (p < 0.05). Water vapor permeability (WVP) of films increased when SP content increased up to 20% and decreased with increasing SP content up to 30% (p < 0.05). Solubility of films decreased but protein solubility increased with increasing SP contents (p < 0.05). The a*-value and ΔE* of film increased with increasing SP content. Films with all MP/SP ratios exhibited the negligible transmission to the light in UV range. Therefore, it is suggested that the type and ratio of proteins in fish muscle, both SP and MP, influenced the properties of film from round scad muscle. Results suggested that the removal of sarcoplasmic protein from fish muscle by thorough washing was an effective means to improve the mechanical properties as well as color of the fish muscle protein-based film.     

Physico-chemical properties,morphology and antioxidant activity of film from fish skin gelatin incorporated with root essential oils

The influences of three root essential oils (ginger, turmeric and plai) at different levels (25%, 50% and 100%, based on protein content) on properties and antioxidative activity of fish skin gelatin-based film were investigated. Films incorporated with all essential oils showed the lower tensile strength (TS) but higher elongation at break (EAB) with increasing amount of essential oils, compared with the control film (without oil incorporated), regardless of types of essential oil (p < 0.05). Water vapor permeability (WVP) of films containing essential oils decreased as the amount of essential oils increased (p < 0.05). Decreases in L^*-value and increases in b^*-, ΔE^*- and transparency value were observed with increasing amount of essential oils incorporated (p < 0.05). FTIR spectra indicated that films added with essential oils, especially from plai root, exhibited higher hydrophobicity than the control film, as evidenced by higher amplitude at wavenunber of 2877–2922 cm⁻¹ and 1732 cm⁻¹. Lower degradation temperature was obtained in films containing essential oils. Microstructural study revealed that bilayer films could be formed when essential oils at level above 50% were incorporated. Film incorporated with plai and turmeric essential oils showed the higher DPPH and ABTS radical scavenging activity, respectively, (p < 0.05), compared with the control film and ginger essential oil added film. Thus, the incorporation of root essential oils directly affected properties of fish skin gelatin-based film, depending on types and levels incorporated.     

Functional properties of gelatin from cuttlefish (Sepia pharaonis) skin as affected by bleaching using hydrogen peroxide

Functional properties of gelatin from dorsal and ventral skin of cuttlefish with and without bleaching by H₂O₂ at different concentrations (2% and 5% (w/v)) for 24 and 48 h were studied. Gelatin from skin bleached with 5% H₂O₂ for 48 h showed the highest yield (49.65% and 72.88% for dorsal and ventral skin, respectively). Bleaching not only improved the colour of gelatin gel by increasing the L^∗-value and decreasing a^∗-value but also enhanced the bloom strength, and the emulsifying and foaming properties of the resulting gelatin. Gelatin from bleached skin contained protein with a molecular weight of 97 kDa and had an increased carbonyl content. Fourier transform infrared spectroscopic study showed higher intermolecular interactions and denaturation of gelatin from bleached skin than that of the control. These results indicated that hydrogen peroxide most likely induced the oxidation of gelatin, resulting in the formation of gelatin cross-links, giving improved functional properties.     

Yellow discoloration of the liposome system of cuttlefish (Sepia pharaonis) as influenced by lipid oxidation

Lipid oxidation, discoloration, loss of amine groups and pyrrolization of the liposome systems of cuttlefish (Sepia pharaonis) in the presence of FeCl₃ and ascorbic acid were studied. Thiobarbituric acid-reactive substances (TBARS) and the b^∗-value of cuttlefish liposomes increased with a coincidental decrease in amine groups when the incubation temperatures (0, 4, 25, and 37 °C) and incubation times (0–24 h) were increased (p < 0.05). As lipid oxidation and yellow pigment formation in the cuttlefish liposome proceeded, a loss of amine groups and pyrrolization were also detected. The effects of FeCl₃ and ascorbic acid, at different concentrations, on TBARS production, b^∗-value, loss of amine groups and pyrrolization of cuttlefish liposome were also investigated. Both FeCl₃ and ascorbic acid showed prooxidative effects in cuttlefish liposome in a concentration-dependent manner. Sodium chloride (0–2%) reduced TBARS, b^∗-values and pyrrole compounds. These results suggest a positive correlation between lipid oxidation and the development of yellow pigments in cuttlefish phospholipids.     

Effect of ozone processing on anthocyanins and ascorbic acid degradation of strawberry juice

Strawberry juice samples were ozonated with processing variables of ozone concentration (1.6–7.8% w/w) and treatment time (0–10 min). Effects of processing variables on anthocyanins (P3G), ascorbic acid (AA) and colour values (L^∗, a^∗, and b^∗) were determined. Significant reductions in anthocyanin content (98.2%) and ascorbic acid (85.8%) were observed at an ozone concentration of 7.8% w/w and a treatment time of 10 min. The changes in lightness (L^∗) values and total colour difference (TCD) values were fitted well to zero-order kinetics, whereas, a^∗, b^∗ followed first-order kinetics. P3G and AA were fitted to first order and fraction conversion models. The rate constants for L^∗, a^∗, b^∗ and TCD were linearly correlated with ozone concentration, whereas, P3G and AA were exponentially related.     

Comparative analysis of fruit-based functional snack bars

The aim was to develop snack bars with high dietary fibre (DF) and polyphenol contents. Snack bar base was formulated without (control bar) or with fibre (inulin or apple DF bar). Snack bar filling was formulated with or without apple polyphenol extract (APE). Nutritional assessment of snack bars was based on the total DF, phenolics, protein, fat, uronic acid (UA) and moisture contents, water activity, Hunter L^∗a^∗b^∗ colour, hardness, and phenolic composition. Results showed that snack bars with added apple DFs gave the highest amount of total DF (∼5.3% w/w). Good quantities of phenolics were also retained in the snack bars with added apple DF and APE after baking. With APE in the bar filling, the snack bars enhanced with apple DF or inulin had higher levels of extracted phenolics (2.87 and 2.22 mg catechin equivalent (CtE)/g bar) than the control bars (1.45 mg CtE/g bar). The phenolic profiles of snack bars obtained by HPLC resembled that of the APE ingredient. The Hunter L^∗a^∗b^∗ colour and water activity values suggested that the addition of APE did not cause extra browning and the resultant snack bars would possess a good shelf life. Therefore, snack bars enhanced with apple DF and APE may be a convenient functional food, offering a good source of DF and apple polyphenols.     

Influences of degree of hydrolysis and molecular weight of poly(vinyl alcohol) (PVA) on properties of fish myofibrillar protein/PVA blend films

Biodegradable blend films based on fish myofibrillar protein (FMP) and poly(vinyl alcohol) (PVA) were prepared and characterized. PVA with different degrees of hydrolysis (DH) and molecular weights (MW) had the impact on properties of FMP/PVA (1:1, w/w) blend film. The blend films with higher MW of PVA were more tensile resistant, as indicated by the greater tensile strength (TS) and elongation at break (EAB), while the films with PVA of lower DH were more flexible. The blend film with PVA-BP26 (DH: 86–98% mol; MW: 124,000–130,000 g/mol) exhibited the greatest tensile performance and the lowest water vapor permeability (p < 0.05), compared with other films. SEM and FTIR results revealed that FMP and PVA were compatible and their intermolecular interaction was enhanced, providing the blend film with desirable properties. Therefore, incorporation of PVA with appropriated DH and MW could improve the properties of the FMP-based film.     

Characterization of gelatin films prepared from under-utilized blue shark (Prionace glauca) skin

Gelatin film from blue shark (Prionace glauca) skin was investigated in order to utilize what is one of the most serious marine wastes in Japan. Film properties from shark skin such as tensile strength (TS), elongation at break (EAB) were evaluated. The TS of gelatin film from shark skin was affected by the protein concentration (1, 2 and 3%) of the film-forming solution (FFS). TS of the film from a 2% protein FFS was the highest. EAB and water vapor permeability (WVP) increased with increasing FFS protein concentration. WVP of shark skin gelatin was evidently low as compared to gelatin films from other fish. An increase in the FFS protein concentration decreased transparency at almost all wavelengths. Furthermore, opacity at 280 nm was characteristically high as compared to films from bony fish skin. The addition of glycerol improved flexibility and enhanced the UV barrier property at 280 nm. However, transparency at the visible range and WVP increased with increasing glycerol content.From the above, it was suggested that shark skin gelatin film technology can be applied to pharmaceutical products or rich-fat food due to its excellent water and UV barrier properties.     

Structure-modifying alkaline and acidic pH-shifting processes promote film formation of soy proteins

The effect of pH-shifting, a process that induces the molten globule state in proteins, on the film-forming potential of soy protein isolate (SPI) at different temperatures was investigated. Partial unfolding at pH 1.5 or 12, followed by refolding at pH 7.0, was performed to alter the protein structure. Glycerin-plasticised films were prepared from pH-treated SPI at ambient temperature (20 °C), or by heating at 50, 60, 70, or 80 °C (30 min). Tensile strength (TS), elongation at break (EAB), water vapour permeability (WVP), protein solubility (pH 3–7), and non-participating proteins of films were analysed, and the film microstructures were examined. The pH₁₂-treated SPI spontaneously formed a transparent, slightly yellowish film at 20 °C, which had the greatest EAB, while pH_1.5-treated and native SPIs required preheating at 50 and 70 °C, respectively, to form a film. Heating generally decreased solubility and WVP but increased TS. Films formed from both pH₁₂- and pH_1.5-treated SPIs were more elastic (up to 2-fold greater in EAB, P < 0.05) than the film formed from untreated SPI despite slightly reduced TS and WVP. Electrophoresis revealed disulphide bonds between A and B subunits of glycinin being a dominant force in pH₁₂- and pH_1.5-treated SPI films, while noncovalent forces were abundant in untreated SPI films. The pH₁₂-treated SPI film consisted of more interactive protein strands than other SPI films, which seemed to explain its superior elastic properties.