Synthesis,characterisation and flame,thermal and electrical properties of poly (<Emphasis Type="Italic">n</Emphasis>-butyl methacrylate)/titanium dioxide nanocomposites

Nanocomposites based on poly (n-butyl methacrylate) (PBMA) with various concentrations of titanium dioxide (TiO₂) nanoparticles were synthesised by in situ free radical polymerisation method. The formation of nanocomposite was characterised by FTIR, UV, XRD, DSC, TGA, impedance analyser and flame retardancy measurements. FTIR and UV spectrum ascertained the intermolecular interaction between nanoparticles and the polymer chain. The XRD studies indicated that the amorphous region of PBMA decreased with the increase in content of metal oxide nanoparticles. The SEM revealed the uniform dispersion of nanoparticles in the polymer composite. The DSC and TGA studies showed that the glass transition temperature and thermal stability of the nanocomposites were increased with the increase in the concentration of nanoparticles. The conductivity and dielectric properties of nanocomposites were higher than pure PBMA and the maximum electrical property was observed for the sample with 7 wt% TiO₂. As the concentration of nanoparticles increased above 7 wt%, the electrical property of nanocomposite was decreased owing to the agglomeration of nanoparticles in the polymer. Nanoparticles could impart better flame retardancy to PBMA/TiO₂ composite and the flame resistance of the materials improved with the addition of nanoparticles in the polymer matrix.     

Preparation of poly(butyl methacrylate)/γ‐Al2O3 nanocomposites via ultrasonic irradiation

A new technique (ultrasonic irradiation) has been employed to prepare poly(n‐butyl methacrylate) PBMA/γ‐Al₂O₃ nanocomposites, taking advantages of the multiple effects of ultrasonic irradiation, such as dispersion, pulverization and activation. When subjected to ultrasonic irradiation, n‐butyl methacrylate (BMA) is polymerized to form poly(n‐butyl methacrylate) (PBMA) latex without any chemical initiators, and the monomer conversion reaches 72.5% in 25 min. At an appropriate pH, surfactant bilayers are formed through electrostatic interactions between γ‐Al₂O₃ nanoparticles and the anionic surfactant sodium dodecyl sulfate (SDS), which adsorb BMA. After ultrasonic induced polymerization of BMA in the presence of nanoparticles of γ‐Al₂O₃, the γ‐Al₂O₃ nanoparticles are encapsulated by PBMA shells formed. The influence of factors such as pH, surfactant concentration and the nanoparticle content is investigated. The FTIR spectra show that there are still polymers tightly adsorbed by nanoparticles even after extraction by acetone for 72 h. The difference observed in the XPS spectra of nanocomposite residues and the pure γ‐Al₂O₃ nanoparticles may indicate some interactions between γ‐Al₂O₃ nanoparticles and the PBMA matrix. Furthermore, the feasibility of SDS bilayer formation and encapsulating polymerization is proven by XPS characterization. © 2001 Society of Chemical Industry     

A novel route for the synthesis of poly(2‐hydroxyethyl methacrylate) grafted TiO2 nanoparticles via surface thiol‐lactam initiated radical polymerization

Hybrid nanocomposites of poly(2‐hydroxyethyl methacrylate) (PHEMA) and TiO₂ nanoparticles were synthesized via surface thiol‐lactam initiated radical polymerization by following the grafting from strategy. Initially, TiO₂ nanoparticles were modified by 3‐mercaptopropyl trimethoxysilane to prepare thiol functionalized TiO₂ nanoparticles (TiO₂? SH). Subsequently, surface initiated polymerization of 2‐hydroxyethyl methacrylate was conducted by using TiO₂? SH and butyrolactam as an initiating system. The anchoring of PHEMA onto the surface of TiO₂ nanoparticles was investigated by FTIR, ¹H‐NMR, XPS, TGA, and XRD analyses. The experimental results indicated a strong interaction between PHEMA and TiO₂ nanoparticles owing to covalent bonding. The TEM and SEM images of PHEMA‐g‐TiO₂ showed that the agglomeration propensity of TiO₂ nanoparticles was significantly reduced upon the PHEMA functionalization. The molecular weight and polydispersity index of the cleaved PHEMA from the surface of TiO₂ nanocomposites were estimated by GPC analysis. An improved thermal property of the nanocomposites was observed from TGA analysis. PHEMA‐g‐TiO₂ nanocomposites were found to be highly dispersible in organic solvents. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

New interpenetrating polymer networks based on uralkyd–poly(butyl methacrylate)

A study on two‐component semi‐ and full‐interpenetrating polymer networks (IPNs) of soyabean‐oil based uralkyd resin (UA) and poly(butyl methacrylate) (PBMA) synthesized by a sequential technique, has been conducted. The IPNs obtained are characterized with respect to their mechanical properties, such as tensile strength, percentage elongation and hardness (Shore A). Phase morphology has been studied by scanning electron microscopy. Glass transition studies have been carried out using differential scanning calorimetry. The thermal characterization of the IPNs was undertaken with the aid of thermogravimetric analysis. The apparent densities of these samples have been determined and are compared. The effect of the compositional variation on the above‐mentioned properties was examined. The tensile strength exhibits a sudden rise (approximately three‐fold) for the semi‐ and full‐IPNs with composition UA: PBMA 40% : 60% compared with the UA:PBMA composition of 20% : 40%. © 2001 Society of Chemical Industry     

New strategy for preparation of LLDPE nanocomposites through tandem catalytic system

Tandem catalytic system composed of the ethylene trimerization catalyst CrCl₃/bis(2-butylsulfanyl-ethyl)amine) (SNS) ( I ) and the ethylene copolymerization catalyst zirconocene dichloride ( II ) has been introduced for preparation of linear low-density polyethylene (LLDPE). The catalytic behavior of the novel catalyst ( I ) activated by modified methyl aluminoxane was tested that afforded 1-hexene (1-C₆) with the activity of 141,370 g 1-C₆/mol-Cr h. The butyl branches in the polymers prepared by tandem catalysis method were determined utilizing Fourier transform infrared (FTIR) spectroscopy for the first time. The higher Cr/Zr molar ratio led to increasing the butyl content within the prepared copolymer up to 10.38 butyl branches per 1000 C in the polymer chain. LLDPE nanocomposites having different types of nanofillers (TiO₂, Santa Barbara Amorphous-15, and Fe₃O₄ magnetic nanoparticles) were prepared and analyzed by FTIR, scanning electron microscopy (SEM), differential scanning calorimetry, and thermogravimetric analysis. Increasing the sonication time up to 60 min enhanced the nanoparticles dispersion in the polymeric matrix. SEM images of the nanocomposites with various amounts of nanofillers, showed the best dispersion of the nanofillers in the presence of 50 mg nanofiller in toluene solvent. The presence of the nanofillers also increased the hydrophilicity of the polymer surface. Antibacterial activity against Gram-negative bacteria was also observed for the prepared nanocomposites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47497.     

Synthesis and characterization of rutile titanium dioxide/polyacrylate nanocomposites for applications in ultraviolet light‐shielding materials

Rutile titanium dioxide (TiO₂)/poly(methyl methacrylate‐acrylic acid‐butyl acrylate) nanocomposites were synthesized via seeded emulsion polymerization and characterized by Fourier transmission infrared, dynamic light scattering, X‐ray diffraction, ultraviolet–visible (UV–vis) spectroscopy, scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis to study their UV‐shielding property. The effects of the nanoseed types, surfactant concentrations, and functional monomer amounts on the polymerization conversion, particle size, emulsion stability, and morphologies of the resulting nanocomposites were investigated. The dependence of UV‐shielding performance on the nanoparticle content and dispersion was also explored. The optimized results are obtained with 2 wt% of TiO₂ nanoparticles addition, and the effectiveness of UV shielding is significantly increased by using the synthesized rutile nano‐TiO₂/polyacrylates, for which the nanocomposite coating with a thickness of 200 μm could block up to 99.99% of UV light (≤350 nm) as confirmed by UV–vis spectrometry. POLYM. COMPOS., 36:8–16, 2015. © 2014 Society of Plastics Engineers     

Thermal stability of HCl‐doped‐polyaniline and TiO2 nanoparticles‐based nanocomposites

Electrically conductive HCl doped polyaniline (Pani) : titanium dioxide (TiO₂) nanocomposites thin films were prepared by in‐situ oxidative polymerization of aniline in the presence of different amounts of TiO₂ nanoparticles. Later film casting was done using N‐Methyl‐2‐pyrrolidone (NMP) as a solvent. The formation of Pani : TiO₂ nanocomposites were characterized by Fourier Transform Infra‐Red spectroscopy (FTIR), x‐ray diffraction (XRD) and thermogravimetric analysis (TGA). The stability of the nanocomposites in terms of direct‐current electrical conductivity retention was studied in air by isothermal and cyclic techniques. The films of Pani : TiO₂ nanocomposites were observed thermally more stable under ambient environmental conditions than pure polyaniline film. The stability was seen to be highly dependent on the content of TiO₂ nanoparticles in the nanocomposite films. Due to their high stability, such type of nanocomposites can find place as a replacement material for pure polyaniline in electrical and electronic devices. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of poly(hydroxylic fluoroacrylate)/mSiO2 nanocomposite by in situ solution polymerization

In this study, vinyl‐group modified nanosilicas (mSiO₂) were prepared via sol–gel method using vinyltriethoxysilane (VTES) as modifier first, then the novel poly(hydroxylic fluoroacrylate)/mSiO₂ nanocomposite was successfully synthesized by in situ solution polymerization of mSiO₂ with dodecafluoroheptyl methacrylate (DFHMA), β‐hydroxyethyl methacrylate (HEMA), methyl methacrylate (MMA), and butyl acrylate (BA) initiated by 2,2‐azobisisobutyronitrile (AIBN) in the co‐solvents of ethyl acetate and butyl acetate. The chemical composition and structure of the nanocomposite were characterized by Fourier transform infrared spectrometry (FTIR) and transmission electron microscopy (TEM). TEM observation indicated that mSiO₂ nanoparticles obtained a well dispersion in polymeric matrix. Thermogravimetric analysis (TGA) studies revealed that the temperature corresponding to 50% weight loss of the nanocomposite was improved by 21.5°C with the addition of 2.0 wt % mSiO₂. The synthesized nanocomposites were applied to use with hexamethylene diisocyanate trimer (HDIT) to prepare polyurethane materials. Tensile test revealed that polyurethane material with mSiO₂ content of 2.0 wt % showed an ultimate tensile strength of about 5.19 times higher than that without mSiO₂. The polyurethane films displayed surface energy of lower than 25 mN m^–1 and high light transmittance. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation,characterization, and dynamic adsorption–desorption studies on polypyrrole encapsulated TiO2 nanoparticles

Binary doped polypyrrole (PPy) encapsulated Titania (TiO₂) nanoparticles were prepared by oxidative polymerization using FeCl₃ as oxidant in presence of camphorsulfonic acid (CSA) as surfactant. Both FeCl₃ (oxidant) and camphorsulfonic acid (surfactant) also act as dopant and hence thus prepared polypyrrole/Titania (TiO₂@PPy) is termed as binary doped nanocomposite i.e. FeCl₃ dopes polypyrrole by oxidation mechanism while camphorsulfonic acid dopes polypyrrole by protonic doping mechanism. The TiO₂@PPy coreshell nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), thermogravimetry, differential scanning calorimetry (DSC), field emission‐scanning electron microscopy (FE‐SEM), and inductance‐capacitance‐resistance (LCR) measurements. The results indicated that the structural and electrical properties of the TiO₂@PPy coreshell nanocomposites were significantly influenced by the extent of TiO₂ nanoparticles loading of polypyrrole. The direct current (DC) electrical conductivity of the as‐prepared TiO₂@PPy coreshell nanocomposites was higher than that of PPy. As‐prepared TiO₂@PPy coreshell nanocomposites were also studied for their dielectric losses for alternating current (AC) which is useful characteristic for their application in the fabrication of charge storing devices. TiO₂@PPy coreshell nanocomposites showed synergistic effect of combining components in improving their alcohol sensing properties. This improvement may be attributed to the adsorption on and desorption from alcohols TiO₂@PPy interface of the nanocomposites and alcohol vapors causing decrease in depletion region. The TiO₂@PPy coreshell nanocomposites were observed to show better reproducibility of electrical conductivity and fast self‐recovery during the alcohol vapor sensing process. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43411.     

Mechanical properties and nonisothermal crystallization kinetics of polyamide 6/functionalized TiO2 nanocomposites

Titanium dioxide (TiO₂) nanoparticles were pretreated with excessive toluene‐2,4‐diisocyanate (TDI) to synthesize TDI‐functionalized TiO₂ (TiO₂‐NCO), and then polymeric nanocomposites consisting of polyamide 6 (PA6) and functionalized‐TiO₂ nanoparticles were prepared via a melt compounding method. The interfacial interaction between TiO₂ nanoparticles and polymeric matrix has been greatly improved due to the isocyanate ( NCO) groups at the surface of the functionalized‐TiO₂ nanoparticles reacted with amino groups ( NH₂) or carboxyl ( COOH) groups of PA6 during the melt compounding and resulted in higher tensile and impact strength than that of pure PA6. The nonisothermal crystallization kinetics of PA6/functionalized TiO₂ nanocomposites was investigated by differential scanning calorimetry (DSC). The nonisothermal crystallization DSC data were analyzed by the modified‐Avrami (Jeziorny) methods. The results showed that the functionalized‐TiO₂ nanoparticles in the PA6 matrix acted as effective nucleation agents. The crystallization rate of the nanocomposites obtained was faster than that of the pure PA6. Thus, the presence of functionalized‐TiO₂ nanoparticles influenced the mechanism of nucleation and accelerated the growth of PA6 crystallites. POLYM. COMPOS., 35:294–300, 2014. © 2013 Society of Plastics Engineers     

Surface‐activated nanosilica treated with silane coupling agents/polypropylene composites: Mechanical,morphological, and thermal studies

This work reports the mechanical, morphological, and thermal properties of the polypropylene (PP) nanocomposites containing nanosilica (nano‐SiO₂) which were treated by different functional group silane coupling agents. Four types of silane coupling agents namely aminopropyltriethoxy silane (APTES), glycidyloxypropyltrimethoxy silane (GPTMS), trimethoxysilylpropyl methacrylate (TMPM), and dichlorodimethyl silane (DCMS) were used to modify the surface‐activated nanosilica. To enhance the effectiveness of the coupling, nanosilica was chemically activated and analyzed through FTIR and X‐ray photo electron spectroscopy (XPS). The highest tensile strength was recorded by the activated nanocomposites treated with APTES followed by nanocomposite treated with GPTMS, TMPM, and DCMS, respectively. The addition of silane coupling agents into nano‐SiO₂/PP system further improved the tensile modulus of the PP nanocomposites. From the transmission electron microscopy (TEM) analysis, activated nanosilica treated with APTES showed better nanosilica dispersion in the PP matrix and lesser agglomeration occurred when compared with the other silane coupling agents which were used in this study. Surface activation process does not effectively increase the degree of crystallinity and thermal stability on the PP nanocomposites. However, with the assistance of the surface treatment, it was found that the thermal behavior of the PP nanocomposites had been enhanced. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Enrichment of poly(butyl methacrylate) and its graft copolymer of polybutadiene on the surface of polypropylene blend

The enrichment and diffusion of poly (butyl methacrylate) (PBMA) and its graft copolymer of polybutadiene on the surface of polypropylene (PP) blends were investigated using attenuated total reflection infrared spectroscopy (ATR‐FTIR), contact angle measurements (CDA), and scanning electron microscopy (SEM). It has been found that the selective aggregation of the PBMA and its copolymers on the surface of blends is mainly affected by the content, molecular weight, and the segregated domains. Lower content and higher surface energy die are in favor of the enrichment of additives on the surface of PP. PBMA with higher molecular weight has lower diffusivity and bigger phase domains, which results in its lower enrichment on the surface of PP blend film. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Characterization and physical properties investigation of conducting polypyrrole/TiO2 nanocomposites prepared through a one‐step “in situ” polymerization method

Nowadays, nanocomposites are a special class of materials having unique physical properties and wide application potential in diverse areas. The present research work describes an efficient method for synthesis of a series of polypyrrole/titanium dioxide (PPy/TiO₂) nanocomposites with different TiO₂ ratios. These nanocomposites were prepared by one‐step in situ deposition oxidative polymerization of pyrrole hydrochloride using ferric chloride (FeCl₃) as an oxidant in the presence of ultra fine grade powder of anatase TiO₂ nanoparticles cooled in an ice bath. The obtained nanocomposites were characterized by Fourier‐transform infrared (FTIR), thermogravimetric analysis (TGA), X‐ray diffraction (XRD), and scanning electron microscope (SEM) techniques. The obtained results showed that TiO₂ nanoparticles have been encapsulated by PPy with a strong effect on the morphology of PPy/TiO₂ nanocomposites. Also, the synthesized PPy/TiO₂ nanocomposites had higher thermal stability than that of pure PPy. The investigation of electrical conductivity of nanocomposites by four‐point probe instrument showed that the conductivity of nanocomposite at low TiO₂ content is much higher than of neat PPy, while with the increasing contents of TiO₂, the conductivity decreases. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Characterization of in situ prepared nanocomposites of PS and TIO2 nanoparticles surface modified with alkyl gallates: Effect of alkyl chain length

Incorporation of surface modified TiO₂ nanoparticles into polystyrene (PS) matrix was achieved by in situ bulk radical polymerization of styrene. The surface of TiO₂ nanoparticles was modified with four amphiphilic esters of the gallic acid (octyl, decyl, lauryl and cetyl gallate), which have different lengths of hydrophobic alkyl chain (C8–C16). FTIR and UV‐Vis spectroscopy measurements confirmed the formation of a charge transfer complex between surface Ti atoms and gallic esters. Microstructural characterization of the synthesized nanocomposites revealed that the best dispersion of TiO₂ nanoparticles in PS was achieved when the TiO₂ surface was modified with octyl gallate. The presence of surface modified TiO₂ nanoparticles by different alkyl gallates does not have an influence on the molecular weight and glass transition temperature of PS matrix. On the other hand, thermal and thermo‐oxidative stability of PS were significantly improved by incorporation of surface modified TiO₂ nanoparticles. The most pronounced improvement of thermal and thermo‐oxidative stability was observed for TiO₂ nanoparticles surface modified with octyl gallate. POLYM. COMPOS., 2013. © 2013 Society of Plastics Engineers     

Effects of Nickel Oxide (NiO) nanoparticles on the performance characteristics of the jatropha oil based alkyd and epoxy blends

Plant oil based alkyd resin was prepared from jatropha oil and blended with epoxy resin. Subsequently, alkyd/epoxy/NiO nanocomposites with different wt % of NiO nanoparticles have been prepared by mechanical mixing of the designed components. The structure, morphology, and performance characteristics of the nanocomposites were studied by UV‐visible spectroscopy, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and universal testing machine (UTM). The alkyd/epoxy/NiO nanocomposites showed the gradual increase in thermal stability with increasing NiO content. With 3 wt % NiO content the tensile strength of the nanocomposite increased by 19 MPa (more than twofold) when compared with the pristine polymer. Limiting oxygen index (LOI) value of the nanocomposites indicate that the incorporation of NiO nanoparticles even in 1 wt % can greatly improves the flame retardant property of the nanocomposites. This study confirms the strong influence of NiO nanoparticles on the thermal, mechanical, and flame retardant properties of the alkyd/epoxy/NiO nanocomposites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41490.     

Structure and functional properties of glycerol-plasticized starch/TiO<Subscript>2</Subscript> nanocomposite materials obtained through resonant wave mixing

Resonant wave mixing is a promising technology based on employing non-linear waves to intensify heat and mass transfer and enhancing dispersion processes in mixed materials. In the present work, for the first time, resonant wave mixing was used to prepare film-forming dispersions based on gelatinized maize starch and spherical TiO₂ nanoparticles (0.5–1.5 wt%) synthesized by sol–gel technique. Then, nanocomposite films were obtained by solution casting method. The dynamic viscoelastic properties, including relaxation spectra of the film-forming dispersions were investigated by oscillatory squeeze film rheometry, while the structure of the nanocomposite films was studied by X-ray diffraction, FTIR spectroscopy and scanning electron microscopy. The mechanical, water-related and UV-protective properties of the film materials were evaluated. It was shown that nanofiller incorporation enhanced the density of the 3D network structure of a gelatinized starch dispersion. The resonant wave treatment favored homogenous dispersion of the TiO₂ nanoparticles in the nanocomposites. All nanocomposite film samples displayed higher tensile strength and lower water vapor permeability in comparison with starch films without the nanofiller. The obtained nanocomposites possessed UV-protective properties, which could be potentially applied to produce biodegradable packaging materials with improved functional characteristics.     

Preparation of poly(methyl methacrylate‐co‐butyl methacrylate) nanoparticles and their reinforcing effect on natural rubber

Poly(methyl methacrylate‐co‐butyl methacrylate) [P(MMA‐co‐BMA)] nanoparticles were synthesized via emulsion polymerization, and incorporated into natural rubber (NR) by latex compounding. Monodispersed, core‐shell P(MMA‐co‐BMA)/casein nanoparticles (abbreviated as PMBMA‐CA) were produced with casein (CA) as surfactant. The chemical structure of P(MMA‐co‐BMA) copolymers were confirmed by ¹H‐NMR and FTIR analyses. Transmission electron microscopy demonstrated the core–shell structure of PMBMA‐CA, and PMBMA‐CA homogenously distributed around NR particles, indicating the interaction between PMBMA‐CA and NR. As a result, the tensile strength and modulus of NR/PMBMA‐CA films were significantly enhanced. The tensile strength was increased by 100% with 10% copolymer addition, when the molar ratio of MMA:BMA was 8:2. In addition, scanning electron microscopy and atomic force microscopy results presented that the NR/PMBMA‐CA films exhibited smooth surfaces with low roughness, and PMBMA‐CA was compatible with NR. FTIR‐ATR analyses also suggested fewer PMBMA‐CA nanoparticles migrated out of NR. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43843.     

Synthesis and characterization of PBMA‐b‐PSt‐b‐PBMA triblock copolymers by atom transfer radical emulsion polymerization

Poly(n‐butyl methacrylate)‐b‐polystyrene‐b‐poly(n‐butyl methacrylate) (PBMA‐b‐PSt‐b‐PBMA) triblock copolymers were successfully synthesized by emulsion atom transfer radical polymerization (ATRP). Difunctional polystyrene (PSt) macroinitiators that contained alkyl chloride end‐groups were prepared by ATRP of styrene (St) with CCl₄ as initiator and were used to initiate the ATRP of butyl methacrylate (BMA). The latter procedure was carried out at 85°C with CuCl/4,4′‐di (5‐nonyl)‐2,2′‐bipyridine (dNbpy) as catalyst and polyoxyethylene (23) lauryl ether (Brij35) as surfactant. Using this technique, triblock copolymers consisting of a PSt center block and PBMA terminal blocks were synthesized. The polymerization was nearly controlled, ATRP of St from those macroinitiators showed linear increases in the number average molecular weight (Mn) with conversion. The block copolymers were characterized with infrared (IR) spectroscopy, hydrogen‐1 nuclear magnetic resonance (¹HNMR), and differential scanning calorimetry (DSC). The effects of the molecular weight of macroinitiators, concentration of macroinitiator, catalyst, emulsion, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP were also reported. POLYM. ENG. SCI., 45:1508–1514, 2005. © 2005 Society of Plastics Engineers     

Synthesis of poly(butyl acrylate)—laponite nanocomposite nanoparticles for improving the impact strength of poly(lactic acid)

This work aims at preparing and characterizing poly(butyl acrylate) (PBA)—laponite (LRD) nanocomposite nanoparticles and nanocomposite core (PBA‐LRD)‐shell poly(methyl methacrylate) (PMMA) nanoparticles, on the one hand, and the morphology and properties of poly(lactic acid) (PLA)‐based blends containing PBA‐LRD nanocomposite nanoparticles or (PBA‐LRD)/PMMA core–shell nanoparticles as the dispersed phase, on the other hand. The PBA and (PBA‐LRD)/PMMA nanoparticles were synthesized by miniemulsion or emulsion polymerization using LRD platelets modified by 3‐methacryloxypropyltrimethoxysilane (MPTMS). The grafting of MPTMS onto the LRD surfaces was characterized qualitatively using FTIR and quantitatively using thermogravimetric analysis (TGA). The amounts of LRD in the PBA‐LRD nanocomposites were characterized by TGA. The PBA/PMMA core–shell particles were analyzed by ¹H‐NMR. Their morphology was confirmed by SEM and TEM. Mechanical properties of (PBA‐LRD)/PLA blends and (PBA‐LRD)/PMMA/PLA ones were tested and compared with those of the pure PLA, showing that core–shell particles allowed increasing impact strength of the PLA while minimizing loss in Young modulus and tensile strength. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of PBMA on PVC‐based polymer blend electrolytes

Poly(vinyl chloride) (PVC)—poly(butyl methacrylate) (PBMA) blended polymer electrolytes with lithium perchlorate (LiClO₄) as the complexing salts are prepared by solution casting technique. The addition of PBMA into PVC matrix is found to induce considerable changes in physical and electrical properties of the polymer electrolytes. Addition of PBMA into PVC matrix is found to increase the conductivity by two orders of magnitude (1.108 × 10^?5 S cm^?1) when compared with that of the pristine PVC polymer electrolyte (10^?7 S cm^?1). Structural, thermal, mechanical, morphological, and polymer–salt interactions are ascertained from X‐ray diffraction (XRD), thermogravimetry/differential thermal analysis (TG/DTA), mechanical analysis, scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR) respectively. A thermal stability upto 250 °C is asserted from the TG/DTA analysis. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44939.