Wideband and low profile polarization conversion meatasurface‐based circularly polarized slot antenna

The purpose of this study is to investigate the application of a polarization conversion meatasurface for constructing a low profile, wideband circularly polarized slot antenna, which consists of a new Polarization conversion metasurface (PCM)‐based square‐corner‐cut artificial magnetic conductor cell structure and a feeding slot antenna. PCM possesses two frequency points of polarization rotation (PR), produced by appropriately adjusting width between the two triangular metallic patches. A 39.3% (4.7‐7 GHz) of big PR band was realized through the combination of two neighboring PR frequency points. The impedance bandwidth of PCM based patch antenna was measured to be 43.5% (4.5‐7 GHz), with 17.2% (5.3‐6.3 GHz) of 3 dB axial ratio (AR) bandwidth and 0.045λ₀ of profile. It also generated 7.3 dBic of high broadside gain in operational bandwidth.     

Metasurface cavity antenna for broadband high‐gain circularly polarized radiation

The article presents a microstrip patch (MSA) fed high gain circularly polarized metasurface cavity (CP‐MSC) antenna using a planar progressively‐phased‐reflector and a transmissive linear to circular polarization conversion metascreen. The bottom metasurface reflector consists of a remodeled Jerusalem cross to obtain 2π reflection phase variation. Linear to circular polarization conversion is achieved by a hexagonal ring based meta‐element with high transmission and bellow 3 dB axial ratio from 9.5 to 10.5 GHz. Simulated and measured results of assembled CP‐MSC antenna with MSA are in good agreement. The gain of the proposed cavity antenna with 10 and 10.5 GHz MSA are 14.9 and 16.3 dBi, respectively. Below 3 dB AR throughout the operating band denotes significant circular polarization performance of the proposed antenna.     

A new broadband circularly polarized antenna with a single‐layer metasurface

In this article, a new low‐profile broadband circularly polarized antenna with a single‐layer metasurface is designed. The metasurface is composed of 4 × 4 rotated rectangle‐loops. Compared to single rotated rectangle, introducing inner‐cut rectangle slot can increase the design flexibilities by changing this slot size for wider circularly polarized operating bandwidth and reduce the size of the antenna in same frequency. The proposed antenna has the advantages of a wide 3‐dB axial ratio bandwidth from 5.4 to 6.05 GHz and an excellent 10‐dB impedance bandwidth from 5 to 6.05 GHz.     

A compact asymmetric slot dual band antenna fed by CPW for PCS and UWB applications

A compact slot antenna with an overall dimension of 30 × 30 × 1.6 mm³ is proposed for dual band applications. The radiating element is a hexagonal shape patch which protrudes from a Co‐Planar Waveguide (CPW) feed into a step shape slot. The slot is basically rectangular in shape and is extended by inserting rectangular cuts of different sizes on the ground plane around it. The ultrawide impedance bandwidth is achieved using asymmetric feed line along with extended rectangular cuts around the slot. For realizing the second band for personal communication system applications (near 1.9 GHz), a metallic stub of quarter wave length is attached at the top of the slot. The measured impedance bandwidth (for S₁₁ < ?10 dB) is 110 MHz (1.86–1.97 GHz) for the first band and 9 GHz (3.0–12.0 GHz) for the second band. The antenna is further characterized by omnidirectional radiation patterns in the H‐plane, dumb‐bell shape radiation patterns in the E‐plane and a peak gain of 3–5 dBi over the ultrawideband. All the measured results are found to be in good agreement with the simulated results. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:243–254, 2015.     

A multistate high gain antenna based on metasurface

A multi‐state high gain antenna based on metasurface is proposed. The antenna is composed of two stacking layers and a ground plane. The metasurface is constituted by two layers with the same size. And both of the two layers contain a copper patch array which is formed by 4 × 4 square copper cells uniformly distributed along x and y directions. The metasurface antenna is excited by the aperture coupled structure. The structure is consists of an anomaly microstrip line and a narrow slot etched in the ground plane. Genetic algorithm (GA) is adopted to optimize all the parameters and obtain the best performance of the metasurface antenna. By appropriately choosing the dimensions of the antenna, the proposed antenna can be achieved with the impedance bandwidth (RL≥10 dB) of about 340 MHz (7.8% at 4.36 GHz), 180 MHz (3.6% at 5.02 GHz), and 2800 MHz (41.1% at 6.81 GHz). The peak gain of the proposed antenna is 10.1dBi, 6.9 dBi, and 10.5dBi at 4.26 GHz, 5 GHz, and 7 GHz. In addition, the proposed metasurface antenna can work in multistate, which makes it an excellent candidate for practical applications.     

Miniaturized coplanar waveguide‐fed disk monopole antenna for ultra‐wideband applications with improved wireless local area network band rejection

In this article, we first propose a miniaturized coplanar waveguide‐fed disk monopole antenna with overall size of 14 mm × 22 mm. Measurement results show that the antenna has an ultrawide impedance bandwidth from 3 to 12 GHz and omnidirectional radiation pattern. Next, we introduce two U‐shaped slots in the ground plane of the antenna to provide an improved band rejection in the wireless local area network frequency band. Experimental results indicate that the proposed band notch antenna has maximum voltage standing wave ratio (VSWR) of 25 in the desired rejection band. Measured gain for the proposed band notch antenna is around 0 dB and reduces to ?15dB in the desired rejection band. Time domain performance of both the initial antenna and band notch antenna is also examined and the best detection template is presented. Computed total fidelity factors for both the initial and band notch antenna are greater than 0.9. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013     

A triple‐slotted substrate integrated cavity‐fed 2 × 2 metasurface antenna with wide bandwidth

This article presents a triple‐slotted substrate integrated cavity (SIC)‐fed 2 × 2 metasurface antenna. Three modes can be obtained including TM₁₀ mode of the metasurface, TE₂₁₀, mode and TE₃₁₀ mode of the SIC. The TE₂₁₀ mode of SIC radiates through the two side slots and is coupled to the metasurface mainly by the two side slots, while the TE₃₁₀ mode of SIC is mainly coupled to the metasurface by the middle slot. Comparing with the reported SIC‐backed slot antenna, dual‐slotted SIC‐fed patch antenna or the metasurface antenna, the proposed antenna exhibits the advantage of wide bandwidth with flat gain. One prototype operated at 10 GHz was fabricated and measured with 10‐dB fractional bandwidth of 33%, the gain of 8.1 dBi at the center frequency, the cross polarization level of 20 dB and the gain ripple of 1.5 dB.     

Miniaturized dual‐band slot antenna design for GPS,amateur radio and WLAN applications

In this article, miniaturization of dual‐band slot antenna design for GPS, WLAN and amateur radio applications is presented. The proposed dual‐band miniaturized antenna is achieved using slits, rectangular split ring and metallic strips fed by 50 Ω microstrip feed. The first resonant frequency is achieved by loading reference antenna with eight slits that is antenna 1 and the second resonant frequency is achieved by loading with one center slits and rectangular split ring that is antenna 2. Dual‐band antenna is achieved by loading reference slot antenna with nine slits and rectangular split ring which resonates at frequency of 1.52 and 3.03 GHz respectively. As a result, it is achieved 53.79% reduction in first band resonant frequency with 76.07% improvement in ?10 dB bandwidth and 7.90% reduction in second band resonant frequency compared to reference slot antenna. Further, this dual‐band antenna is miniaturized by metallic strips which are placed on the bottom of the substrate. This results in 61.39% reduction in first band resonant frequency with 32.07% improvement in ?10 dB bandwidth and 26.13% reduction in second band resonant frequency in comparison with reference slot antenna topology.     

Design of a novel metasurface for dual‐band Fabry‐Pérot cavity antenna

A novel reflective metasurface which presents different reflection phases to different polarization waves is designed in this article. The metasurface is used as the ground plane of a Fabry‐Pérot cavity (FPC) antenna. The radiator of the FPC antenna is a dual‐band patch antenna which has different polarizations in different bands, so by tuning the reflection phase of the metasurface correctly, the FPC antenna can work in two frequency bands. A prototype antenna is fabricated and measured. The measured results show that the antenna can operate at 8.35‐8.56 GHz (2.5%) in x‐polarization and 9.5‐10.1 GHz (6.1%) in y‐polarization. The maximum realized gains of the antenna in two bands are 17.6 dB at 8.75 GHz and 19 dB at 9.8 GHz. The measured results agree well with the simulated results which confirm the correctness of the design.     

Wideband printed slot antenna using Koch fractal metasurface structure

A novel wideband slot antenna with Koch fractal metasurface structure is presented in this letter. Using Koch metasurface as a slot edge, the proposed antenna obtains excellent performance in bandwidth. For optimal bandwidth, optimization is done for both iteration angle (IA) and iteration factor (IF) at each iteration order (IO). The measured results show that the impedance bandwidth of the optimized antenna can reach about 1.75 octaves (1.45‐4.86 GHz) for VSWR ≤ 2. In addition, stable radiation patterns are observed over the whole operating band of the proposed antenna.     

High gain transmitarray antenna based on ultra‐thin metasurface

This article presents a bandwidth enhanced transmitarray (TA) antenna based on ultra‐thin metasurface (MS) for high gain operating at X‐band. The antenna consists of a three layers continuous flat structure and an aperture coupled microstrip antenna as the feed source. The relative phase shift of 360° is achieved by the unit cell design based on ultra‐thin MS, and the quasi‐spherical wave could be focused as plane wave when the wave goes through TA. The aperture coupled microstrip feed is designed with a bandwidth of 20.6%, and the bandwidth enhanced property of feed source will reduce the negative effect of elements mutual coupling on TA and increase the bandwidth of the TA antenna. The TA antenna gain increases from 8.25 to 18.98 dB and with a side lobe level of ?14.3 dB. Owing to the low‐profile and easy configuration, this kind of TA antenna has great potential, wireless communication.     

A high gain wideband circularly polarized antenna with asymmetric metasurface

An asymmetric‐metasurface based wideband circularly polarized (CP) microstrip antenna using a coaxial probe is proposed for L‐band applications. The antenna involves a stacked asymmetric‐metasurface, a radiating rectangular‐patch and a coaxial feed. An asymmetric‐metasurface is designed using rectangular unit cells and smaller size unit cells along one of the diagonal lines. The asymmetric‐metasurface is placed above a radiating rectangular‐patch with support of foam layer to achieve a wideband CP radiation. The measured performance of the prototype antenna achieves an impedance bandwidth (?10 dB return loss bandwidth) of 15.7% (1.58‐1.85 GHz) with CP bandwidth (3‐dB axial ratio) of 13% (1.58‐1.80 GHz) and gain of ≥9 dBic.     

A low‐profile quad‐port UWB MIMO antenna using defected ground structure with dual notch‐band behavior

A compact (45 × 45 × 1.6 mm³) ultrawide‐band (UWB), multiple‐input multiple‐output (MIMO) design using microstrip line feeding is presented. The proposed design comprises four elliptical monopoles placed orthogonally on a cost‐effective FR‐4 substrate. In order to improve the impedance bandwidth and lessen the return loss of the MIMO antenna, defects in ground plane are created by etching symmetrical square slots and half‐rings. Moreover, a different method (of unsymmetrical H‐shaped slot with C‐shaped slot) was proposed into the patch to introduce dual‐band rejection performance from UWB at center frequency 5.5 GHz (covering lower WLAN as well as upper WLAN) and 7.5 GHz (X band). In addition, a stub is introduced at the edge of each defected ground structure to obtain isolation >–22 dB covering entire performing band from 2 to 16.8 GHz (where, S₁₁ < –10 dB). The proposed design has miniaturized size, very low envelop correlation coefficient less than 0.1, stable gain (2‐4 dBi except for notch bands). Furthermore, various MIMO performance parameters are within their specifications, such as diversity gain (= 10 dB), total active reflection coefficient (<–5 dB, and channel capacity loss (<0.35 bits/s/Hz). The presented design is optimized using the HFSS software, and fabricated design is tested using vector network analyzer. The experimental results are in good agreement with the simulation results.     

Metasurface based pattern reconfigurable antenna for 2.45 GHz ISM band applications

In this article, a Z‐shaped antenna is designed for 2.45 GHz ISM band applications. The proposed antenna is surrounded by metasurface‐based unit cells. The unit cells are designed to reflect for the proposed frequency. Each of this unit cells are activated with the help of a diode. Unit cell is considered active by switching on the diode of respective unit cell. According to the activation of unit cell the pattern of the antenna will be reconfigured. The 2.45 GHz ISM band pattern reconfigurable microstrip antenna is presented. The radiation pattern of the antenna can be steered toward a desired direction by activating appropriate metasurface unit cell, minimizing the interference and optimizing medium usage. The proposed antenna performance is presented with the help of reflection coefficient and the pattern steerable capability by activating metasurface unit cells. The proposed antenna is having azimuth‐pattern reconfigurable capability around 360°.     

Gain‐improved double‐slot LTSA with conformal corrugated edges

In this article, a novel double‐slot linearly tapered slot antenna with conformal corrugated edges, is proposed. By using double‐slot structure, the E‐plane aperture field of the proposed antenna is more like a plane wave, which helps to improve the directivity of the antenna. Meanwhile, a novel corrugated edge is designed. This conformal corrugated edge can cover all the outer edges of the antenna which has a better improvement of the impedance bandwidth compared with the rectangle corrugated edge. Additionally, according to the theory of microwave network, this article analyzes the reason of bandwidth enhancement realized by double‐slot structure. The proposed antenna provides 145% fractional bandwidth from 3.5 GHz to 22 GHz. The gain of the proposed antenna is more than 12 dB from 6.5 GHz to 21 GHz, and more than 8 dB at the whole operating band.     

A new broadband circularly polarized square‐slot antenna with low axial ratios

A new broadband circularly polarized (CP) square‐slot antenna with low axial ratios is proposed in this article. The antenna is comprised of an L‐shaped microstrip line with tapered section and a square‐slot ground plane with some stubs and slots, which are utilized as perturbations for the desirable antenna performance. By loading stubs and slots in the square‐slot ground plane, the 2‐dB axial ratio bandwidth (ARBW) and 10‐dB return loss bandwidth for the presented antenna can be markedly improved. The measured results show that its 2‐dB ARBW is 4.2 GHz (54.2% from 5.65 GHz to 9.85 GHz) and its 10‐dB return loss bandwidth is about 8.9 GHz (92.7% from 5.15 GHz to 14.05 GHz). The proposed antenna features compact structure and broad 2‐AR bandwidth which could completely cover the WLAN (5.725‐5.85 GHz) band. Therefore, the proposed antenna is suitable for circular polarization applications in C band.     

Dual‐band CPW fed MIMO antenna with polarization diversity and improved gain

A dual‐band MIMO slot antenna with polarization diversity and improved gain is proposed in this article. The antenna is composed of two C‐type back‐to‐back connected slot resonators and offers resonances at 3.5 and 5.2 GHz. This antenna element is further used to design a MIMO antenna. By introducing one U‐shaped slot between two antenna elements, isolation between the ports of this MIMO antenna is improved further. Finally, an artificial magnetic conductor (AMC) is placed below the MIMO antenna to enhance its gain. Gain enhancement of 1.5 and 2.2 dB is achieved at lower and upper band, respectively. S‐parameters, radiation patterns, gain, envelope correlation coefficient, and channel capacity loss are investigated to conclude about its performances in MIMO applications. Dual band dual polarization (circular and linear), improved isolation, polarization diversity (right‐hand circular polarization and left‐hand circular polarization), gain enhancement all are presented in a simple design represents the novelty of the proposed MIMO antenna.     

Substrate integrated waveguide dual‐frequency dual‐sense circularly polarized cavity‐backed slot antenna

A novel design of dual‐frequency dual‐sense circularly polarized (CP) substrate integrated waveguide (SIW) cavity‐backed slot antenna is presented for dual‐band wireless communication systems. The proposed antenna consists of square SIW cavity, asymmetrical bow‐tie‐shaped cross slot and probe feed. Due to use of asymmetrical bow‐tie‐shaped cross slot, circularly polarized wave radiates at two different frequencies with opposite sense of polarizations. The RHCP radiation occurs at (10.45‐10.54) GHz (Lower band) and LHCP occurs at (11.26‐11.34) GHz (Upper band). Moreover, in each band, sense of polarization can be change by changing the feed position. The front to back radiation ratio (FTBRR) is more than 10.5 dB and cross polarization level is lower than ?20 dB in both the bands.     

A modified fractal‐shaped slotted patch antenna with defected ground using metasurface for dual band applications

A novel modified fractal‐shaped slotted patch antenna employing metasurface at bottom plane along with partial ground has been proposed in this work for dual band applications with significant gain. A 4 × 5 order metasurface has been formed in the ground plane by introducing a periodic combination of two L‐type patches with centered C‐type shaped patch. The top conductor and the ground plane are designed on a 1.6 mm thick FR4 dielectric with the dimension of 28 × 28 mm². The antenna is designed in such a way that it operates over the dual frequency ranges viz., 1.80 to 5.70 GHz and 10.38 to 10.94 GHz. The maximum return loss of 21 dB has been achieved over 2.60 GHz while the maximum realized gain of 7.16 dBi has been obtained at 10.92 GHz. The designed antenna offers omnidirectional radiation characteristics in the first band while directional radiation characteristics have been observed in the second band. The proposed antenna can be utilized for WiMAX 3.5/5.5 GHz, mobile, radio astronomy, and microimaging in medical analysis.     

Modified ground with 50 Ω step fed WLAN notch 2 × 2 MIMO UWB antenna

In this research paper, an optimized 2 × 2 MIMO UWB antenna (antenna‐E) with half circled radiators as well as 50 Ω step fed has been introduced. The proposed UWB MIMO antenna has been evolved from recent peer published papers that provide WLAN notch (5.15‐5.85GHz), ultra wide band width (3.1‐10.6 GHz) and again a very good isolation (?20 dB) also maintained. In this paper the evolutions have been derived from antenna‐A to antenna‐E. The Ultra wide band is achieved by using step feed line, cutting a metal strip on a partial ground plane, a rectangular slot underneath the feed line of each radiator in antenna‐E. A high isolation (?20 dB) is obtained by introducing two inverted Г shaped stubs in the ground plane. Both antenna‐D and antenna‐E maintain high isolation (?20 dB). But antenna‐E performs better isolation compared to antenna‐D. The notch at WLAN band (5.15‐5.85GHz) is achieved by etching rectangular C‐shaped slot on the both the radiators. In antenna‐E two radiators are placed horizontally where as in antenna‐D two radiators placed orthogonally. It has been observed that the dimension of final outcome (antenna‐E) is reduced by 33% compared to antenna‐D without compromising the overall performance of the antenna.