Effect of filler loading and coconut oil coupling agent on properties of low‐density polyethylene and palm kernel shell eco‐composites

Palm kernel shell (PKS), a waste from the oil palm industry, has been utilized as filler in low‐density polyethylene (LDPE) eco‐composites in the present work. The effect of PKS content and coconut oil coupling agent (COCA) on tensile properties, water absorption, and morphological and thermal properties of LDPE/PKS eco‐composites was investigated. The results show the increase of PKS content decreased the tensile strength and elongation at break, but increased the tensile modulus, crystallinity, and water absorption of eco‐composites. The presence of COCA as coupling agent improved the filler‐matrix adhesion yield to increase the tensile strength, tensile modulus, crystallinity, and reduced water absorption of eco‐composites. The better interfacial adhesion between PKS and LDPE with the addition of COCA was also evidenced by scanning electron microscopy studies. J. VINYL ADDIT. TECHNOL., 22:200–205, 2016. © 2014 Society of Plastics Engineers     

Properties of Paper Sludge Filled Polypropylene (PP)/Ethylene Propylene Diene Terpolymer (EPDM) Composites: The Effect of Silane-Based Coupling Agent

Paper sludge was used as a filler in PP/EPDM composites and 3-aminopropyl triethoxysilane (3-APE) was used in this study as a coupling agent. The effects of filler loading and 3-APE on the mechanical properties, water absorption, morphology, and thermal properties of the composites were investigated. It was found that incorporation of a silane coupling agent (3-APE) increased the stabilization (equilibrium) torque, tensile strength, and Young's modulus but decreased the elongation at break and water absorption. Scanning electron microscopy (SEM) study of the tensile fracture surface of the composites indicated that the presence of 3-APE increased the interfacial interaction between paper sludge and PP/EPDM matrix. The addition of a silane coupling agent also increased the crystallinity of PP and thermal stability of PP/EPDM/PS composites.     

The effect of compounding techniques on the mechanical properties of oil palm empty fruit bunch–polypropylene composites

Oil palm empty fruit bunch–polypropylene (EFB–PP) composites were produced by employing 2 types of compounding techniques, that is, an internal mixer and a single-screw extruder. The mechanical and water absorption properties of both types of composites were investigated. Overall, for both types of composites, the incorporation of the EFB into PP matrix has resulted in the improvement in the tensile modulus. However, the tensile strength, elongation at break, and impact strength decreased with increasing filler loading. Poor filler–matrix interaction or compatibility and, also, the size irregularity of the EFB are believed to be responsible for the poor ultimate performance. Composites produced by an internal mixer (IM) have displayed higher tensile strength, tensile modulus, and impact strength than with those produced by extrusion (EX). The better performance has been attributed to the effectiveness of the IM, which produces better compounding and improves the wetting of the filler surface. Incorporation of compatibilizer and coupling agent, that is, Epolene wax (E-43) and 3-Aminopropyl triethoxysilane (3-APE), respectively, have produced composites with improved tensile strength for both EX and IM composites. In addition, both types of treatment have resulted in an increase in tensile modulus of EX composites and impact strength of IM composites. Water absorption tests have revealed that the presence of coupling agents and compatibilizers have affected the amount of water absorbed, especially for the 3-APE-treated EFB–PP composites. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 70: 2647–2655, 1998     

Maleated Natural Rubber as a Coupling Agent for Recycled High Density Polyethylene/Natural Rubber/Kenaf Powder Biocomposites

Kenaf powder (KP) was incorporated into recycled high density polyethylene (rHDPE)/natural rubber (NR) blend using an internal mixer at 165°C and rotor speed of 50 rpm. The tensile strength and elongation at break of the composites decreased, while the tensile modulus increased with increasing filler loading. The water absorption was found to increase as the filler content increased. The maleic anhydride grafted natural rubber was prepared and used to enhance the composites performance. The addition of MANR as a coupling agent improved the tensile properties of rHDPE/NR/KP biocomposites. The water absorption was also reduced with the addition of MANR.     

Characterization of melt‐compounded and masterbatch‐diluted polypropylene composites filled with several fillers

The effect of various fillers on the mechanical, barrier, and flammability properties of polypropylene (PP) was studied. PP was filled with 4 wt% of nano‐sized calcium carbonate, titanium dioxide, organoclay, and multiwalled carbon nanotube (MWCNT). For comparison, micron‐sized calcium carbonate was also studied. Two‐step masterbatch dilution approach of the composites suggested no or only minor improvements in Young's modulus and tensile yield strength, whereas their ductility decreased compared to coupling agent‐modified PP matrix. The water vapor transmission results of filled films showed increased permeability compared to their coupling agent‐modified counterpart. Oxygen permeability, however, decreased for the composites. The MWCNT‐filled matrix showed the highest barrier and fire performance, attributed mainly to its higher filler volume content, but also other reasons such as the effect of filler dispersion, composite's thermal stability, and polymer crystallinity were discussed.POLYM. COMPOS., 2013. © 2013 Society of Plastics Engineers     

Morphological,mechanical, and physical properties of composites made with wood flour‐reinforced polypropylene/recycled poly(ethylene terephthalate) blends

Wood flour (WF)‐filled composites based on a polypropylene (PP)/recycled polyethylene terephthalate (r‐PET) matrix were prepared using two‐step extrusion. Maleic anhydride grafted polypropylene (MAPP) was added to improve the compatibility between polymer matrices and WF. The effects of filler and MAPP compatibilization on the water absorption, mechanical properties, and morphological features of PP/r‐PET/WF composites were investigated. The addition of MAPP significantly improved mechanical properties such as tensile strength, flexural strength, tensile modulus, and flexural modulus compared with uncompatibilized composites, but decreased elongation at break. Scanning electron microscopic images of fracture surface specimens revealed better interfacial interaction between WF and polymer matrix for MAPP‐compatibilized PP/r‐PET/WF composites. MAPP‐compatibilized PP/r‐PET/WF composites also showed reduced water absorption due to improved interfacial bonding, which limited the amount of absorbable water molecules. These results indicated that MAPP acts as an effective compatibilizer in PP/r‐PET/WF composites. POLYM. COMPOS., 38:1749–1755, 2017. © 2015 Society of Plastics Engineers     

The effect of dynamic vulcanization on mechanical properties and water absorption of silica and rubberwood filled polypropylene/natural rubber hybrid composites

Dynamic vulcanized silica and rubberwood filled polypropylene (PP)/natural rubber (NR) hybrid composites were prepared using a Brabender plasticorder at 150°C and a rotor speed of 50 rpm for 12 minutes. The effectiveness of the dynamic vulcanization was indicated by the Brabender plastograms. The mechanical and water absorption properties of hybrid composites with different concentration of sulfur were investigated. Significant enhancement in mechanical properties, viz. tensile strength, stress at peak, Young modulus and flexural modulus were observed for dynamically vulcanized hybrid composites compared to unvulcanized hybrid composites. This has been attributed to the increase in crosslink density, which was manifested by a reduction of water absorption and increase of stabilization torque at the end of mixing stage with increasing sulfur concentration.     

Influence of interfacial adhesion on the structural and mechanical behavior of PP‐banana/glass hybrid composites

Hybrid composites of polypropylene (PP), reinforced with short banana and glass fibers were fabricated using Haake torque rheocord followed by compression molding with and without the presence maleic anhydride grafted polypropylene (MAPP) as a coupling agent. Incorporation of both fibers into PP matrix resulted in increase of tensile strength, flexural strength, and impact strength upto 30 wt% with an optimum strength observed at 2 wt% MAPP treated 15 wt% banana and 15 wt% glass fiber. The rate of water absorption for the hybrid composites was decreased due to the presence of glass fiber and coupling agent. The effect of fiber loading in presence of coupling agent on the dynamic mechanical properties has been analyzed to investigate the interfacial properties. An increase in storage modulus (E′) of the treated‐composite indicates higher stiffness. The loss tangent (tan δ) spectra confirms a strong influence of fiber loading and coupling agent concentration on the α and β relaxation process of PP. The nature of fiber matrix adhesion was examined through scanning electron microscopy (SEM) of the tensile fractured specimen. Thermal measurements were carried out through differential scanning calorimetry (DSC) and the thermogravimetric analysis (TGA), indicated an increase in the crystallization temperature and thermal stability of PP with the incorporation of MAPP‐treated banana and glass fiber. POLYM. COMPOS., 31:1247–1257, 2010. © 2009 Society of Plastics Engineers     

Studies on the Physicomechanical Properties of Sodium Periodate Oxidized Jute Reinforced Polypropylene (PP) Composites

In the present work, effects of oxidation and fiber content (from 20 to 35 wt. %) on the physicomechanical properties of jute-polypropylene (PP) composites were studied. Mechanical properties (tensile strength, tensile modulus, elongation at break, flexural strength, flexural modulus, and charpy impact strength) were measured for all raw and oxidized jute-PP composites. Improved mechanical properties were obtained for oxidized jute-PP composites. Interfacial adhesion and bonding between the fiber and PP matrix were investigated by scanning electron micrograph analysis. Improved interfacial interactions and reduced water absorption were found for oxidized jute-PP composites. Water absorption tests of all composites were also performed.     

Effect of the delignification of wood fibers on the mechanical properties of wood fiber–polypropylene composites

The effect of the delignification of hornbeam fibers on the mechanical properties of wood fiber–polypropylene (PP) composites was studied. Original fibers and delignified fibers at three levels of delignification were mixed with PP at a weight ratio of 40:60 in an internal mixer. Maleic anhydride (0.5 wt %) as the coupling agent and dicumyl peroxide (0.1 wt %) as the initiator were applied. The produced composites were then hot‐pressed, and specimens for physical and mechanical testing were prepared. The results of the properties of the composite materials indicate that delignified fibers showed better performance in the enhancement of tensile strength and tensile modulus, whereas the hardness of the composites was unaffected by delignification. Delignified fibers also exhibited better water absorption resistance. Notched impact strength was higher for delignified fiber composites, but it was reduced at higher delignification levels. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4759–4763, 2006     

Banana/Glass Fiber-Reinforced Polypropylene Hybrid Composites: Fabrication and Performance Evaluation

Hybrid composites of Polypropylene (PP) reinforced with intimately mixed short banana and glass fibers were fabricated using Haake twin screw extruder followed by compression molding with and without the presence maleic anhydride grafted polypropylene (MAPP) as a coupling agent. Incorporation of both the fibers into PP matrix resulted in an increase in tensile, flexural and impact strength with an increasing level of fiber content upto 30 wt% at banana: glass fiber ratio of 15:15 wt% and 2 wt% of MAPP. The rate of water absorption for the hybrid composites decreased due to the presence of glass fiber and coupling agent. The effect of fiber loading in presence of coupling agent on the dynamic mechanical properties has also been analyzed to investigate the interfacial properties. An increase in the storage modulus (E′) of the treated composite indicates higher stiffness. The tan δ spectra confirms a strong influence of fiber contents and coupling agent on the α and β relaxation processes of PP. The nature of fiber matrix adhesion was examined through scanning electron microscopy (SEM) of the tensile fractured specimen. Thermal measurements were carried out employing differential scanning calorimetry (DSC) and the thermogravimetric analysis (TGA) which indicated a decrease in the crystallization temperature and thermal stability of PP with the incorporation of MAPP treated banana and Glass fiber.     

An investigation on the mechanical and dynamic rheological properties of single and hybrid filler/polypropylene composites based on talc and calcium carbonate

Some results of experiments on the mechanical and rheological properties of mineral filled polypropylene were presented. Single filler and hybrid filler composites of talc and calcium carbonate (CaCO₃) were prepared in a co‐rotating twin‐screw extruder. The effect of filler type, filler content, and coupling agent on the mechanical and rheological properties of the polypropylene were studied. The coupling agent was maleic anhydride‐grafted polypropylene (PP‐g‐MA). It was found that the mechanical properties are affected by filler type, filler concentration, and the interaction between filler and matrix. The tensile strength of the composite is more affected by the talc while the impact strength is influenced mostly by CaCO₃ content. The elongation at break of PP/CaCO₃ composites was higher than that of PP/talc composites. The incorporation of coupling agent into PP/mineral filler composites increased the mechanical properties. Rheological properties indicated that the complex viscosity and storage modulus of talc filled samples were higher than those of calcium carbonate filled samples while the tan δ was lower. The rheological properties of hybrid‐filler filled sample were more affected by the talc than calcium carbonate. The PP‐g‐MA increased the complex viscosity and storage modulus of both single and hybrid composites. POLYM. COMPOS., 2009. © 2009 Society of Plastics Engineers     

Polypropylene and potato starch biocomposites: Physicomechanical and thermal properties

To determine the possibility of using starch as biodegradable filler in the thermoplastic polymer matrix, starch‐filled polypropylene (PP) composites were prepared by extrusion of PP resin with 5, 10, 15, and 20 wt % of potato starch in corotating twin‐screw extruder. The extruded strands were cut into pellets and injection molded to make test specimens. These specimens were tested for physicomechanical properties such as tensile and flexural properties, Izod impact strength, density, and water absorption. These PP composites were further characterized by melt flow index (MFI), vicat softening point (VSP), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) techniques. It was found that, with increase in starch content, tensile modulus, flexural strength, and flexural modulus of the PP composites increased along with the increase in moisture, water absorption, and density, while retaining the VSP; but, tensile strength and elongation, impact strength, hardness, and MFI of the PP composites also decreased. DSC analysis of the PP composite revealed the reduction in melting temperature, heat of fusion, and percentage of crystallization of PP with increase in starch content. Similarly, TGA traces display enhanced thermal degradability for PP as starch content increases. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Enhancing interfacial adhesion performance by using poly(vinyl alcohol) in (low‐density polyethylene)/(natural rubber)/(water hyacinth fiber) composites

The effects of (a) the chemical modification of water hyacinth fiber by poly(vinyl alcohol) (WHF‐_PVA) and (b) loading on the properties of low‐density polyethylene (LDPE)/(natural rubber (NR))/(water hyacinth fiber (WHF)) composites were studied. Mechanical properties, water absorption behavior, morphology, and thermal properties were examined; X‐ray diffraction and infrared spectroscopic analysis were done. The results indicated that LDPE/NR/WHF‐_PVA composites had higher values of tensile strength, Young's modulus, melting temperature, and water absorption resistance but lower elongation at break than LDPE/NR/WHF composites. The LDPE/NR/WHF‐_PVA composites had better interfacial adhesion between the matrix and the fibers than LDPE/NR/WHF composites, as shown by SEM results. The LDPE/NR/WHF‐_PVA composites exhibited lower interparticle spacing than LDPE/NR/WHF composites, a feature which enhanced the interparticle interaction between the water hyacinth fibers and the LDPE/NR matrix. J. VINYL ADDIT. TECHNOL., 19:47–54, 2013. © 2012 Society of Plastics Engineers     

The Effect of Ethylene Diamine Dilaurate and Silane Coupling Agent on Cure Characteristics,Mechanical, and Thermal Properties of Silica-Filled Natural Rubber Composites

The influence of a new coupling agent, ethylene diamine dilaurate (EDD) and a commercial silane coupling agent, (Si-69) on the cure characteristics, mechanical and morphological properties of silica-filled natural rubber (NR) composites was studied. The results show that scorch time and cure time decreased with an increase in both coupling agents' content, but maximum and minimum torques exhibit the opposite trend. The mechanical properties such as tensile strength and tensile modulus, M100 and M300, increased with increasing both coupling agents' content but at a similar coupling agent content, silica-filled natural rubber composites with Si-69 exhibit better tensile strength (more than 2 phr) and tensile modulus than does EDD. Elongation at break (Eb) of silica-filled natural rubber increased with increasing EDD content but Si-69 exhibits the opposite trend. Scanning electron microscopy (SEM) study of tensile fracture surfaces shows the better tensile strength of silica-filled natural rubber composites with Si-69 and EDD over control composites (without EDD or Si-69). Thermogravimetric analysis (TGA) results indicate that silica-filled NR composites with EDD have higher thermal stability than Si-69. Fourier transform infrared spectra (FTIR) provided an evidence of interaction between EDD and Si-69 with silica in NR composites.     

Polypropylene/natural rubber composites filled with recycled newspaper: Effect of chemical treatment using maleic anhydride‐grafted polypropylene and 3‐aminopropyltriethoxysilane

A study on effect of chemical treatment using maleic anhydride‐grafted polypropylene (MAPP) and 3‐aminopropyltiethoxysilane (3‐APE) was investigated. The performance of the MAPP and 3‐APE were investigated by means of torque development, mechanical properties, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy morphology, and water absorption. The results revealed that the use of MAPP or 3‐APE in the composites has increased the stabilization torque, tensile strength, Young's modulus, water absorption, and thermal stability of the PP/NR composites. The incorporation of MAPP in the composites shows higher stabilization torque, tensile strength, E_B, Young's modulus, and lower water uptake when compared with the use of 3‐APE in the PP/NR composites. TGA and DSC results indicated that primary and secondary peak of DTG curve, initial degradation temperature (T₀), degradation temperature (T_deg), melting temperature (T_m), heat of fusion of composites (ΔH_f(com)), crystallinity of composites (X_PP), and PP (X_PP) increased, while total weight loss and thermal degradation rate decreased for both treated composites. The MAPP‐treated RNP‐filled PP/NR composites were found to be more thermal resistance and more crystalline than 3‐APE‐treated filled PP/NR RNP composites. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Mechanical and morphological properties of white rice husk ash filled polypropylene/ethylene‐propylene‐diene terpolymer thermoplastic elastomer composites

The performance of white rice husk ash (WRHA) as filler for polypropylene (PP)/ethylene‐propylene‐diene terpolymer (EPDM) thermoplastic elastomer (TPE) composites was investigated. The composites with different filler loadings were prepared in a Brabender plasticorder internal mixer. Both unvulcanized and dynamically vulcanized composites were prepared. Mixing and vulcanization processes of the composites were monitored through the typical Brabender torque‐time curves. The mechanical properties and morphology of the composites were also studied. The Brabender torque curves revealed that the dynamic vulcanization process employed was successful and incorporation of filler has no adverse effect on the processibility of the composites. Incorporation of WRHA improves the tensile modulus and flexural modulus and lowers tensile strength, elongation at break, tear strength, and toughness of both types of composites. Dynamic vulcanization significantly enhances the mechanical and TPE properties of the composites. Dynamic mechanical analysis (DMA) study revealed the existence of two phases in both types of composites. It further shows that neither dynamic vulcanization nor filler agglomeration has played a prominent role in the compatibility of the composites. Thermogravimetric investigation shows that dynamic vulcanization or WRHA loading has not adversely affected the thermal stability of the composites. The scanning electron micrographs provide evidence for the tendency to form filler agglomerates with increasing filler loading, better filler dispersion of dynamically vulcanized composites over unvulcanized composites, and effective vulcanization of elastomer phase of the composites in the presence of filler. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 438–453, 2002     

The effect of epoxy‐polyester hybrid resin on mechanical properties,rheological behavior,and water absorption of polypropylene wood flour composites

The effect of epoxy resin on mechanical and Rheological properties, and moisture absorption of wood flour polypropylene composites (WPCs) were investigated. The reactive mixing of epoxy resin with 30, and 40 wt% wood flour and polypropylene (PP) was carried out in twin screw extruder with a special screw elements arrangement. PP grafted maleic anhydrides (MPP) were used as coupling agent to improve the interfacial interactions of wood flour, epoxy resin, and PP. The tensile strength of composites decreased, and elastic modulus and moisture absorption increased with increasing epoxy resin content. The complex viscosity η* increased with increasing epoxy resin content of composites, and a synergistic effect in increasing the η* was observed at 3 wt% resin. The epoxy resin modified wood‐PP composites that chemically coupled by MPP showed minimum water absorption with highest elastic modulus. The experimental oscillation rheologyical data were used to drive a model to predict the flow behavior of WPCs, in a wide range of frequencies. POLYM. ENG. SCI., 47:2041–2048, 2007. © 2007 Society of Plastics Engineers     

Rice husk powder–filled polystyrene/styrene butadiene rubber blends

Natural fibers are rich in cellulose and they are a cheap, easily renewable source of fibers with the potential for polymer reinforcement. The presence of large amounts of hydroxyl groups makes natural fibers less attractive for reinforcement of polymeric materials. Composites made from polystyrene (PS)/styrene butadiene rubber (SBR) blend and treated rice husk powder (RHP) were prepared. The RHP was treated by esterification and acetylation. A similar series of composites was also prepared using maleic anhydride–polypropylene (MA–PP) as a coupling agent. The processing behavior, mechanical properties, effect of thermooxidative ageing, and surface morphology of untreated and chemically modified RHP were studied. There was a decrease in tensile strength (except MA–PP composites), elongation at break, and Young's modulus in chemically treated RHP composites. The postreaction process during thermooxidative ageing enhanced the tensile strength and Young's modulus of the esterified and MA–PP composites. Acetylation treatment was effective in reducing the percentage of water absorption in RHP/PS–SBR composites. In general chemically treated RHP/PS–SBR composites and MA–PP showed a better matrix phase and filler distribution. However, the degree of filler–matrix interaction was mainly responsible for the improvement of mechanical properties in the composites. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3320–3332, 2004     

Effects of hygrothermal ageing on mechanical properties of flax pulps and their polypropylene matrix composites

The aim of this work was to study the kinetics of water uptake and its influence on mechanical behavior of both flax pulps and their composites with a maleic anhydride polypropylene copolymer (MAPP) modified polypropylene (PP) matrix by immersion in distilled water at 30, 50, 70, and 100°C. Both the influence of two different MAPP compatibilizers and the optimum doses of each ones were analyzed. The kinetics of water uptake was studied from weight measurements at regular interval times. The diffusion coefficient was dependent on the immersion temperature and MAPP content. Tensile modulus and strength of single flax fiber decreased by water immersion. Both flexural strength and modulus of composites decreased as a result of the combined effect of thermal ageing and moisture absorption. MAPP coupling agent increases moisture resistance and mechanical properties for MAPP‐modified systems with respect to the unmodified ones. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3438–3445, 2006