求方产品索引

(产品按拼音顺序排列)门了月了一了一了︸了7 77一11了一才一了一了一了︵了Q曰O乃凸︹OC八吕no只︺八匕︹洲O口OC nOO门O口凡︺门了︻了乃了,︻‘︵了门了月‘︻了OC尺︺n6n洲︹伪O曰Q曰88686纯碱醋配﹃h6一b tz门IRC︹O︹门已凸己D冬青油锻锌包装桶对氟苯胺对硝基甲苯多乙烯多胺甲苯甲醇甲醇钠绞股兰皂贰金属钻精蔡酒精旧3K雷蒙机月了︵了︵了78 8 QLJ OCE二苯甲醛二甲胺二硫化铝二氯甲烷S三,五二硝基苯甲酞氯三混甲酚三氯化磷三甲胺盐酸盐三磷酸腺昔二钠三氯乙烯三氯甲烷十二烷基酚十六醇石油甲苯鼠标垫材料顺醉四氢吠喃四乙…     

整流机组节能技术改造总结

介绍了整流机组的技术改造内容。通过改造,提高了装备技术水平,简化了操作,提高了供电的平稳性和安全性;降低了电力损耗;节约了能源。     

焙烧炉燃烧系统油改天然气研究与应用

介绍了炭素焙烧炉燃烧系统由燃油改为天然气的过程,以及使用效果和效益分析,真正实现了清洁生产,达到了理想的节能效果,改善了工艺水平、降低了生产成本、提高了生产效率、净化了工作环境。     

用磷酸进行活性炭后处理的探讨

本文介绍了用磷酸代替盐酸进行活性炭酸洗的方法,该法避免了环境污染,简化了工艺过程,改善了劳动环境,降低了产品成本,提高了产品质量。     

汽车内饰转向护板注塑模设计

本文基于CAD/CAE技术对汽车内饰件转向护板注塑模具进行了设计。运用Pro/E软件对模具进行了三维设计,使用Moldflow对模具进行了CAE分析,优化了浇口位置,合理设计了排气槽,提高了设计效率,创新了塑料模具设计方式。根据产品结构,采用动模中心凸起布局,应用斜顶机构实现侧抽芯,简化了模具结构,提高了模具设计质量,降低了制造成本。     

物料自我粉碎技术初探

对球磨机的研磨进行了研究，提出了物料自我粉碎，降低了研磨成本，提高了研磨效率，既保证了料浆质量又节约了电耗。     

焙烧炉燃烧系统油改天然气研究与应用

介绍了炭素焙烧炉燃烧系统由燃油改为天然气的过程以及使用效果和效益分析,通过改造真正实现了清洁生产,达到了节能效果,改善了工艺水平,降低了生产成本,提高了生产效率,净化了工作环境。     

石油化工企业氢气综合利用

分析了连续重整装置与液相本体聚丙烯装置通过技术改造及操作方案调整,实现了氢气相互综合利用,有效降低了装置能耗和加工成本,减少了污染物排放,达到了能源综合利用,取得了良好的经济效益,实现了循环经济、环保经济。     

硫铁矿渣冷却滚筒的改进

阐述了原硫铁矿渣冷却洋滚筒的缺陷,分析了故障原因,并从设计、制造、安装三方面作了改进。实施后,输送能力满足了生产要求,延长了运行周期,降低了检修费用,保证了正常生产。     

升降搅拌减速机性能改进

改造设计了升降搅拌减速机，使润滑方式更加合理，增加了扭矩，提高了强度，减少了磨损，性能更加完善，减少了维修费用，延长了运转周期。     

液化天然气工厂天然气净化工艺的选择

介绍了天然气中水分、硫化氢、二氧化碳、重烃、汞及氮气等杂质对LNG工厂液化的影响,以及天然气的净化工艺.根据某公司液化天然气工厂天然气来源变化,说明天然气的组成对天然气净化工艺选择的影响.     

气相色谱测定乙烯裂解气组成的方法研究

介绍了一种快速测定乙烯裂解产物气体组分含量的方法.采用多维气相色谱方法,4阀7柱的配置,3通道并行,3检测器检测,通过阀切换及柱反吹技术,实现所有组分的快速分离检测.结果表明,该方法具有速度快、效率高、易操作、结果准的优点.     

Dynamic optimization for gas blending in pipeline networks with gas interchangeability control

The increasing penetration of unconventional gas and liquefied natural gas poses an operational challenge on existing regional gas networks for gas quality problems. A new dynamic model for natural gas pipeline network with multiple supplies is presented with a special emphasis on gas interchangeability control. Wobbe index serves as gas interchangeability indicator and is calculated by equations derived from rigorous composition-based partial differential equations. Disjunctive formulation is applied to represent different modes of gas blending due to gas reversal, and the disjunctive model is then reformulated as a nonsmooth model with min/max and absolute value functions, which is solved by a gradient-based nonlinear program solver after smooth approximation. Moreover, a heuristic algorithm is proposed to tune the penalty parameters in order to focus on different penalty terms while keeping the model well-conditioned. The developed model and strategy are first tested with a small pipeline network model and then extended to a large model. The results show that the model can effectively manage gas interchangeability issues in pipeline networks within reasonable CPU time.     

国内焦炉气制天然气专利技术发展现状

综述了国内焦炉气制天然气专利技术发展现状,分析了国内焦炉气制天然气技术的2种主要工艺,"焦炉气甲烷化制备天然气"工艺和"焦炉气联合净化分离制备天然气"工艺。介绍了目前国内焦炉气制天然气技术拥有单位或个人专利申请情况,指出焦炉气制天然气项目的实施对焦化行业节能减排及发展循环经济等具有重要意义。     

Xenon recovery from natural gas by multiple gas hydrate crystallization: a theory and simulation

ABSTRACT

For efficient xenon (Xe) recovery from natural gas (NG), multiple gas hydrate crystallization was considered. The optimal stages’ number for effective Xe recovery from model gas mixtures with close composition to NG one was determined. Gas hydrate distribution’s coefficients are defined for these gases at each stage, and each iterations of the multiple gas hydrate crystallization. In CH₄+ H₂S+CO₂+ Xe gas mixture that is closest to NG composition, the maximum average Xe concentration in the gas hydrate phase was observed at the second stage of the multiple gas hydrate crystallization.     

燃气轮机在焦炉煤气发电中的应用

介绍了利用焦炉煤气发电的方法及燃气轮机发电的原理和机组结构,简述了焦炉煤气的前置处理系统和烟气脱硝系统。利用燃气轮机发电可综合利用焦炉煤气,是比较合适的发电方式。     

A new process for synthesis gas by co-gasifying coal and natural gas

Production of synthesis gas with coal and natural gas co-gasification is a new process based on coupling of methane steam-reforming and coal gasification. The process concept is discussed in this paper. Experiments are carried out in a laboratory fixed-bed gasifying reactor to investigate the effect of feedstock on composition, ratio of hydrogen to carbon monoxide, concentrations of hydrogen and carbon monoxide in the produced raw synthesis gas. Preliminary experimental results indicate that the effect of steam flow rate on component, ratio of hydrogen to carbon monoxide and concentrations of hydrogen and carbon monoxide of the raw synthesis gas is slight, while the effect of oxygen flow rate is pronounced. When the ratio of oxygen to methane in feedstock is below 1, the ratio of hydrogen to carbon monoxide is greater than 1 and the total concentration of hydrogen and carbon monoxide is above 90%. Comparison of experimental results with calculated results shows that the composition of raw synthesis gas is near equilibrium.     

可燃气体和有毒气体检测报警装置的设计标准化研究

针对可燃气体和有毒气体的检测报警装置,有不同的设计规范,主要分析对比了若干不同规范间的异同,希望对相关从业人员有所帮助。     

焦炉煤气配加转炉煤气生产甲醇工艺介绍

介绍了焦炉煤气配加转炉煤气生产甲醇的工艺流程及主要技术特点。该工艺开辟了利用转炉煤气的新方法,可充分利用新鲜气的有用成分,具有增产甲醇和降低消耗等优点。     

天然气脱酸工艺

中国天然气资源储量较为丰富,在油田生产过程中对已发现的天然气进行处理加工擦能达到外输的标准,顾天然气脱酸是个非常重要的过程。通过对天然气一些常见的脱酸例子进行研究并用HYSYS进行了模拟,得出了天然气脱酸的方法以及提高脱酸效率的建议。