Biosorption of Zinc from Aqueous Solutions by Rice Bran: Kinetics and Equilibrium Studies

Abstract

Rice bran, an agricultural by‐product, was used for the removal of zinc ions from aqueous solution. The work considered the determination of zinc‐biomass equilibrium data in batch system. These studies were carried out in order to determine some operational parameters of zinc sorption such as the time required for the Zinc‐biosorbent equilibrium, the effects of biomass particle size, pH, and temperature. The results showed that pH has an importance effect on zinc biosorption capacity. The biosorbent size also affects the zinc biosorption capacity. The sorption process follows pseudo‐second‐order kinetics. The intraparticle diffusion may be the rate‐controlling step involved in the adsorption zinc ions onto the rice bran up to 30 min. The equilibrium data could be best fitted by the Langmuir sorption isotherm equation over the entire concentration range (40–160 mg/dm³). Thermodynamic parameters, such as ΔG°, ΔH°, ΔS°, have been calculated. The thermodynamics of zinc ion/rice bran system indicate spontaneous and endothermic nature of the process.     

Biosorption of a Basic Dye from Aqueous Solutions by Euphorbia rigida

Abstract

In this study, the biosorption of Basic Blue 9 (BB9) dye from aqueous solutions onto a biomass of Euphorbia rigida was examined by means of the initial biosorbate concentration, biosorbent amount, particle size, and pH. Biosorption of BB9 onto E. rigida increases with both the initial biosorbate concentration and biosorbent amount, whereas decreases with the increasing particle size. The experimental data indicated that the biosorption isotherms are well‐described by the Langmuir equilibrium isotherm equation at 20, 30, and 40°C. Maximum biosorption capacity was 3.28×10^?4 mol g^?1 at 40°C. The biosorption kinetics of BB9 obeys the pseudo‐second‐order kinetic model. The thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated to estimate the nature of biosorption. These experimental results have indicated that E. rigida has the potential to act as a biosorbent for the removal of Basic Blue 9 from aqueous solutions.     

Selective Biosorption of Zirconium and Hafnium from Acidic Aqueous Solutions by Rice Bran,Wheat Bran and Platanus Orientalis Tree Leaves

Abstract

The Zr(IV) and Hf(IV) biosorption characteristics of rice bran, wheat bran and Platanus orientalis tree leaves were examined as a function of initial pH, contact time, temperature, and initial metal ions concentration. Adsorption equilibriums were achieved in about 1, 5 and 40 min for rice bran, wheat bran, and leaves respectively. The biosorption behavior of leaves was significantly affected by solution pH whereas rice bran and wheat bran adsorption efficiencies were slightly affected by solution pH. The Freundlich and Langmuir adsorption equations, which are commonly used to describe sorption equilibrium for metals removal by biomasses, were use to represent the experimental and equilibrium data fitted well to the Langmuir isotherm model. The negative Gibbs free energy values obtained in this study with rice bran wheat bran and Platanus orientalis tree leaves confirmed the feasibility of the process and the spontaneous nature of sorption. In the optimum conditions, the adsorption efficiencies of other metal ions such as Fe³⁺, Cu²⁺, Pb²⁺, Hg²⁺, La³⁺, Ce³⁺ were significantly lower than Zr(IV) and Hf(IV) ions and these biomasses are excellent sorbents for the selective uptake of proposed ions from acidic aqueous solutions.     

Removal of Cr(VI) From Aqueous Solution by Turkish Vermiculite: Equilibrium,Thermodynamic and Kinetic Studies

Abstract

The adsorption of Cr(VI) from aqueous solution by Turkish vermiculite were investigated in terms of equilibrium, kinetics, and thermodynamics. Experimental parameters affecting the removal process such as pH of solution, adsorbent dosage, contact time, and temperature were studied. Equilibrium adsorption data were evaluated by Langmuir, Freundlich and Dubinin–Radushkevich (D–R) isotherm models. Langmuir model fitted the equilibrium data better than the Freundlich model. The monolayer adsorption capacity of Turkish vermiculite for Cr(VI) was found to be 87.7 mg/g at pH 1.5, 10 g/L adsorbent dosage and 20°C. The mean free energy of adsorption (5.9 kJ/mol) obtained from the D–R isotherm indicated that the type of sorption was essentially physical. The calculated thermodynamic parameters (ΔG ^o , ΔH ^o and ΔS ^o ) showed that the removal of Cr(VI) ions from aqueous solution by the vermiculite was feasible, spontaneous and exothermic at 20–50°C. Equilibrium data were also tested using the adsorption kinetic models and the results showed that the adsorption processes of Cr(VI) onto Turkish vermiculite followed well pseudo-second order kinetics.     

Biosorptive Removal of Ni(II) from Aqueous Solution by Caesalpinia bonducella Seed Powder

The present work deals with the use of Caesalpinia bonducella seed powder (CBSP) as a biosorbent for Ni(II) removal from aqueous solution. The nature and morphology of the sorbent were determined using FTIR spectral, SEM, and EDX analysis. The biosorption characteristics of Ni(II) onto CBSP was investigated as a function of pH, biosorbent dosage, contact time, initial metal ion concentration, and temperature. Langmuir and Freundlich isotherms were used to fit the experimental data. The best interpretation for the equilibrium data was given by the Langmuir isotherm. The maximum biosorption capacity was found to be 188.7 mg/g for Ni(II) at pH 5.0 and at 323 K. The equilibrium biosorption data were well fitted with the pseudo-second-order kinetic equation. The values of thermodynamic parameters (ΔG^o, ΔH^o, and ΔS^o) indicated that the biosorption of Ni(II) onto CBSP was feasible, spontaneous and exothermic in nature. The FTIR results revealed that hydroxyl, amine, carboxyl, and carbonyl functional groups are responsible for Ni(II) biosorption onto CBSP.     

Equilibrium,kinetic and isotherm of some metal ion biosorption

Trichoderma reesei was used as a biosorbent for the removal of Co²⁺, Cu²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ ions. The influence of factors such as pH, mass of biomass, contact time and temperature on biosorption efficiency was optimized. To calculate the isotherm parameters for the biosorption of Co²⁺, Cu²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ ions at optimized conditions, the experimental equilibrium data were fitted to Langmuir and Freundlich models. The calculated thermodynamic parameters, ΔG°, ΔH° and ΔS° showed that the biosorption of Co²⁺, Cu²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ ions onto T. reesei biomass was feasible, spontaneous and endothermic at the optimized conditions. The results of kinetic analysis showed that the biosorption of the selected metal ions onto T. reesei biomass obeys pseudo second order kinetics.     

Dynamics and Thermodynamics Studies on the Lead and Cadmium Removal from Aqueous Solutions by Padina sp. Algae: Studies in Single and Binary Metal Systems

Raw and modified biomasses prepared from Padina sp. algae have been used as sorbent for the removal of lead and cadmium from single and binary aqueous solutions. The effects of chemical pretreatment, exposure time, initial solution pH, initial metal concentration, and temperature on the metal uptake by the algae were investigated. It was observed that initial solution pH considerably influenced Pb and Cd uptake. The maximum removal occurred at initial pH of 5.0 for lead and 6.0 for cadmium. Also, alkali modified biomass has been shown to have a high uptake capacity for both lead and cadmium. The kinetic and equilibrium experimental data fitting tested with various models. The pseudo-first-order kinetic model and Langmuir isotherm provided the best correlation of the kinetic and equilibrium experimental data, respectively. The maximum uptake estimated from the Langmuir isotherm was 264 mg g^?1 for lead and 164 mg g^?1 for cadmium ions. Experimental biosorption data in binary system were well described by the extended Langmuir model. Various thermodynamic parameters, such as ΔG°, ΔH°, and ΔS° were calculated.     

Equilibrium,Thermodynamic and Kinetic Studies on Biosorption of Mercury from Aqueous Solution by Macrofungus (Lycoperdon perlatum) Biomass

The present research is to investigate the possibility of macrofungus Lycoperdon perlatum biomass, which is an easily available, renewable plant, low-cost, as a new biomass for the removal of mercury (Hg(II)) ions from aqueous solutions. The effects of various parameters like pH of solution, biomass concentration, contact time, and temperature were studied by the using the batch method. The Langmuir model adequately described the equilibrium data. The biosorption capacity of the biomass was found to be 107.4 mg · g^?1 at pH 6. The mean free energy value (10.9 kJ · mol^?1) obtained from the D–R model indicated that the biosorption of Hg(II) onto fungal biomass was taken place via chemical ion-exchange. Thermodynamic parameters showed that the biosorption of Hg(II) onto L. perlatum biomass was feasible, spontaneous, and exothermic in nature. The kinetic results showed that the biosorption of Hg(II) onto fungal biomass followed second-order kinetics. This work also shows that L. perlatum biomass can be an alternative to the expensive materials like ion exchange resins and activated carbon for the treatment of water and wastewater containing mercury ions due to its ability of selectivity and higher biosorption capacity and also being low cost material.     

Physicochemical Aspects on Fluoride Adsorption for Removal from Water by Synthetic Hydrous Iron(III) – Chromium(III) Mixed Oxide

Fluoride removal with varying different parameters at 303 ± 1.6 K and pH 6.5 ± 0.2 was investigated by hydrous iron(III)-chromium(III) bimetal oxide. The kinetic and equilibrium data fitted with the pseudo-second order and Langmuir isotherm equations very well (R² = 0.99?1.00), respectively. The Langmuir capacity (θ) and free energy (E_DR) of adsorption evaluated were 16.34 (±0.50) mg·g^?1 and 15.81 kJ·mol^?1, respectively. The estimated thermodynamic parameters viz. ΔH⁰, ΔG⁰, and ΔS⁰ indicated that the reaction was endothermic but spontaneous for entropy increase. The small-scale column filtration of high fluoride (C₀ = 7.37 mg·L^?1) water gave encouraging results.     

Isotherms,kinetics, and thermodynamic studies for adsorption of pigments and oxidation products in oil bleaching from catfish waste

Abstract

The aim of this work was to study the bleaching of oil extracted from the heads of the catfish by thermomechanical process through equilibrium, kinetics, and thermodynamics adsorption studies. The condition for the bleaching step was with 1% (w/w) adsorbent composed of 95% activated earth and 5% activated carbon (w/w). The pseudo-first order and pseudo-second order models were the most appropriate to represent the adsorption kinetics. The temperature of 80?°C increased the adsorption capacity of the two adsorbates, and the activation energies values were of 47.47 and 44.82?kJ mol^?1, respectively, for the adsorption of carotenoids and peroxides. The Langmuir model was the most appropriate to describe the bleaching equilibrium curves. The thermodynamic parameters revealed that the processes were endothermic, favorable, and spontaneous and the interaction between adsorbent and adsorbate was physical.     

Pecan Nutshell as Biosorbent to Remove Toxic Metals from Aqueous Solution

Abstract

In the present study we reported for the first time, the feasibility of pecan nutshell (PNS-Carya illinoensis) as an alternative biosorbent to remove Cr(III), Fe(III) and Zn(II) metallic ions from aqueous solutions. The ability of PNS to remove these metallic ions was investigated by using batch biosorption procedure. The effects, such as pH and the biosorbent dosage on the adsorption capacities of PNS were studied. Five kinetic models were tested, the adsorption kinetics being the better fitted one to the fractionary-order kinetic model.

The equilibrium data were fitted to Langmuir, Freundlich, Sips, and Redlich-Peterson isotherm models. Taking into account a statistical error function, the data were best fitted to Sips isotherm models. The maximum biosorption capacity of PNS were 93.01, 76.59, and 107.9 mg g^?1 for Cr(III), Fe(III), and Zn(II), respectively.     

MODIFIED PLANTAIN PEEL AS CELLULOSE-BASED LOW-COST ADSORBENT FOR THE REMOVAL OF 2,6-DICHLOROPHENOL FROM AQUEOUS SOLUTION: ADSORPTION ISOTHERMS,KINETIC MODELING,AND THERMODYNAMIC STUDIES

In this study, the feasibility of using modified plantain peel to remove 2,6-dichlorophenol from iaqueous solutions was investigated under batch mode. The effects of physical factors such as initial 2,6-dichlorophenol concentration, contact time, biosorbent particle size, biosorbent dosage and temperature on the removal process were evaluated. The results showed that biosorption of 2,6-dichlorophenol was dependent on these factors. The equilibrium biosorption data were analyzed by the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich (D-R) adsorption isotherm models. The four tested isotherm models provided good fits to the experimental data obtained at 30°C; however, the Freundlich isotherm model provided the best correlation (R² = 0.9874) of the experimental data. The maximum monolayer biosorption capacity (Q _max ) was found to be 14.25 mg/g. The biosorption kinetics data of 2,6-dichlorophenol were analyzed by pseudo-first-order, pseudo-second-order, Elovich, intraparticle diffusion, and liquid film diffusion models. The five kinetic models fitted well to the biosorption kinetic data; however, the pseudo-second-order kinetic model gave the best fit when the biosorption mechanism was controlled by film diffusion. Thermodynamic quantities such as standard Gibbs free energy (ΔG°), standard enthalpy (ΔH°), standard entropy change of biosorption (ΔS°), and activation energy (E_a) were evaluated, and it was found that the biosorption process was spontaneous, feasible, endothermic in nature and of dual nature, physisorption and chemisorption; however, the physisorption process was dominant. Therefore, modified plantain peel has potential for application as an effective bioadsorbent for removal of 2,6-dichlorophenol from aqueous solution.     

Biosorption of Direct Red 28 (Congo Red) from Aqueous Solutions by Eggshells: Batch and Column Studies

The feasibility of using eggshells as a low-cost biosorbent for the removal of Direct Red 28 (DR 28) from aqueous solutions was studied in batch and dynamic flow modes of operation. The effect of biosorption process variables such as particle size, solution pH, initial dye concentration, contact time, temperature, feed flow rate, and bed height were investigated. Both the Langmuir and Freundlich isotherm models exhibited excellent fit to the equilibrium biosorption data. Optimum pH (6.0), particle size (<250 µm), initial dye concentration (50 mg g^?1), temperature (313 K), and contact time (240 min) gave maximum monolayer biosorption capacity of 69.45 mg g^?1 which was higher than those of many sorbent materials. Pseudo-second-order kinetic model depicted the biosorption kinetics accurately. Thermodynamic study confirmed the spontaneous and endothermic nature of the biosorption process. Breakthrough time increased with increase in the bed height but decreased with increase in flow rate. Overall, batch and continuous mode data suggest the applicability of eggshells as an environment friendly and efficient biosorbent for removal of DR 28 from aqueous media.     

Equilibrium,Kinetics, and Thermodynamics of Bovine Serum Albumin Adsorption on Single-Walled Carbon Nanotubes

We investigated the equilibrium, kinetics, and thermodynamics of bovine serum albumin (BSA) adsorption on single-walled carbon nanotubes (SWNTs) from aqueous solutions with different pH and temperatures. We analyzed the experimental adsorption equilibrium and kinetic data to evaluate the adsorption characteristics of SWNTs for BSA. The results show that the effects of pH and temperature were important. Moreover, the adsorption isotherm data of BSA on SWNTs are consistent with the Langmuir and Freundlich models, while the kinetics can be expressed by the pseudo-first-order and the intraparticle diffusion rate models. The maximum protein adsorption capacity of SWNTs, which have a surface area of 191.2 m²/g, was found to be 609.8 mg g^?1 at pH 4 and 40°C, and this was the highest value obtained among our previous studies examined with various metal oxides. In addition, the zeta potential measurements were examined to understand the effects of charge density of the surface and the protein on the adsorption process. Thermodynamic analysis results indicate that the nature of adsorption changes with pH. SWNTs were found to be effective for BSA adsorption.     

Removal of Boron from Aqueous Solutions by Adsorption Using Fly Ash,Zeolite, and Demineralized Lignite

In the present study for the purpose of removal of boron from water by adsorption using adsorbents like fly ash, natural zeolite, and demineralized lignite was investigated. Boron in water was removed with fly ash, zeolite, and demineralized lignite with different capacities. Ninety-four percent boron was removed using fly ash. Batch experiments were conducted to test the removal capacity, to obtain adsorption isotherms, thermodynamic and kinetic parameters. Boron removal by all adsorbents was affected by pH of solution; maximum adsorption was achieved at pH 10. Adsorption of boron on fly ash was investigated by the Langmuir, Freundlich, and the Dubinin-Radushkevich models. Standard entropy and enthalpy changes of adsorption of boron on fly ash were, ΔS ⁰  = ?0.69 kJ/mol K and ΔH ⁰  = ?215.34 kJ/mol, respectively. The negative value of ΔS ⁰ indicated decreased randomness at the solid/solution interface during the adsorption boron on the fly ash sample. Negative values of ΔH ⁰ showed the exothermic nature of the process. The negative values of ΔG ⁰ implied that the adsorption of boron on fly ash samples was spontaneous. Adsorption of boron on fly ash occurred with a pseudo-second order kinetic model, and intraparticle diffusion of boron species had also some effect in adsorption kinetics.     

BIOSORPTION STUDIES ON NACL-MODIFIED CERATOPHYLLUM DEMERSUM: REMOVAL OF TOXIC CHROMIUM FROM AQUEOUS SOLUTION

The present research provides information on the Cr(VI) removal potential of NaCl-modified Ceratophyllum demersum, an aquatic plant biomass. The effects of various parameters including pH, biomass dosage, contact time, and initial concentration on Cr(VI) biosorption were investigated. The best conditions for Cr(VI) biosorption in the present study were: pH of 2, biosorbent dose of 8 g/L, and contact time of 60 min. Under these conditions, maximum adsorption capacity of modified C. demersum for Cr(VI) was 10.20 mg/g. The experimental biosorption data were modeled by Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherms. The biosorption process followed the Langmuir isotherm model with a high coefficient of determination (R² > 0.99). The biosorption process followed pseudo-second-order kinetics. Further, the biosorbent was characterized by Fourier transform-infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). The results showed that biosorption of Cr(VI) on NaCl-modified C. demersum occurred through chemical sorption.     

Biosorption potential of Neurospora crassa cells for decolorization of Acid Red 57 (AR57) dye

Biosorption of Acid Red 57 (AR57) on to Neurospora crassa was studied with variation of pH, contact time, biosorbent and dye concentrations and temperature to determine equilibrium and kinetic models. The AR57 biosorption was fast and equilibrium was attained within 40 min. Langmuir, Freundlich and Dubinin–Radushkevich (D–R) isotherm models were applied to experimental equilibrium data for AR57 biosorption at various temperatures. The equilibrium data fitted very well to all the equilibrium models in the studied concentration range of AR57. Maximum biosorption capacity (q_max) of AR57 on to N. crassa was 2.16 × 10^?4 mol g^?1 at 20 °C. The kinetics of biosorption of AR57 were analyzed and rate constants were derived. The overall biosorption process was best described by a pseudo‐second‐order kinetic model. The changes in Gibbs free energy, enthalpy and entropy of biosorption were also evaluated for the biosorption of AR57 on to N. crassa. The results indicate that the biosorption was spontaneous and exothermic in nature. Copyright © 2006 Society of Chemical Industry     

Equilibrium,Thermodynamic, and Kinetic Studies on Trichoderma viride Biomass as Biosorbent for the Removal of Cu(II) from Water

Equilibrium, thermodynamic, and kinetic studies on the biosorption of Cu(II) using biomass, Trichoderma viride were carried out. The biosorbent was characterized by Fourier transform infrared spectroscopy and Scanning Electron Microscopy. The Langmuir and Freundlich isotherm models were applied to describe the biosorption process. The influence of pH, the biomass dosage, the contact time, the initial metal ion concentration, and the temperature of the solution on the biosorption was studied. The maximum Cu(II) biosorption was attained at pH 5. The equilibrium data were better fit by the Langmuir isotherm model than by the Freundlich isotherm. The maximum biosorption capacity of T. viride biomass was found to be 19.6 mg/g for Cu(II). The kinetic studies indicated that the biosorption of Cu(II) followed the pseudo-second-order model. The calculated thermodynamic parameters, Gibbs-free energy (ΔG^o), enthalpy (ΔH^o), and entropy (ΔS^o) showed that the biosorption of Cu(II) onto T. viride biomass was spontaneous and endothermic. It can be concluded that the T. viride biomass has the potential as an effective and low-cost biosorbent for Cu(II) removal from aqueous solutions.