Thaumasite formation due to atmospheric SO2–hydraulic mortar interaction

The objective of this paper was to reproduce the formation of thaumasite due to the reaction of atmospheric SO₂ with hydraulic mortars. The research was carried out on mortars made with ordinary Portland cement (OPC), mineralized white Portland cement, hydraulic lime and a mixture of lime and pozzolana. Mortars underwent sulfation by exposing the samples to 300 ppm SO₂ at 25 °C and 95% RH for 2 days. Subsequently, half of the sulfated samples were kept for 6 and 12 months in a chamber with 0.3 ppm, SO₂ as pollutant (0.50 l min⁻¹ flow gas velocity), 5 °C and 95% RH. The other halves of the sulfated samples were kept partially immersed in water at 5 °C for 4, 9 and 14 months.

The process of thaumasite formation in hydraulic mortars due to the interaction of the material with atmospheric SO₂ was reproduced in all the hydraulic mortars kept partially immersed in water at low temperature, except in the lime–pozzolana mixture. Gypsum was the first reaction product formed as a result of that interaction. Subsequently, gypsum reacted with calcium carbonate and C–S–H gel resulting in the formation of thaumasite. The formation of thaumasite was easier and quicker in sulfated samples kept at low temperature partially immersed in water. Only in OPC mortars was thaumasite formation observed in samples exposed to 0.3 ppm of SO₂ for 12 months.     

Catalytic CVD growth of Si–C and Si–C–O alloy films by using alkylsilane and related compounds

Cat-CVD method has been applied to the growth of Si–C and Si–C–O alloy thin films. Growth mechanism has been studied with emphasis on the effects of filament materials. Growth rates and alloy compositions were measured for W, Ta, Mo and Pt filaments at the filament temperatures ranging from 1300 to 2000 °C. Si_1−xC_x films with x ranging from 0.38 to 0.7 could be grown by using single molecule source Si(CH₃)₂H₂ (dimethylsilane). Si–C–O ternary alloy films was successfully prepared by using Si(OC₂H₅)₄ (tetraethoxysilane) and Si(CH₃)₂(OCH₃)₂ (dimethyldimethoxysilane) molecules.     

Evolution of ettringite in presence of carbonate, and silicate ions

The main objective of this work was to study the evolution of ettringite when in contact with a solution containing carbonate and silicate ions.

Ettringite was synthesised and put in contact with three types of saturated solutions: (a) CaCO₃ and silica gel saturated solution; (b) MgCO₃ and silica gel saturated solution and (c) C–S–H gel plus portlandite and CaCO₃ saturated solution. The temperature of the experiment was 4 ± 2 °C. At different ages the samples were studied by: FTIR, XRD, NMR, and SEM/EDX.

Ettringite evolves with time, reacting with carbonates and silicates and decomposing to poorly crystallised products when it is in contact with solutions (a) and (b). Ettringite decomposition rate is much higher when it is in contact with saturated magnesium carbonate solution (b) than when in contact with the solution (a). After 90 days of exposure in solution (b) ettringite decomposition starts, followed by reorganization of the atoms giving place to a semi-stable poorly crystallised compound. However 130 days are necessary for ettringite decomposition in solution (a). Ettringite in contact with solution (c) evolves more slowly and it almost remains unchanged after 380 days of treatment. Ca(OH)₂ formed in the C₃S and C₂S hydration retards ettringite decomposition.     

Characterization of Cat-CVD grown Si–C and Si–C–O dielectric films for ULSI applications

Si–C films with the Si compositions ranging from 40 to 70% have been grown by Cat-CVD using dimethylsilane [DMSi, Si(CH₃)₂H₂] compounds. Tetraethoxysilane [TEOS, Si(OC₂H₅)₄] and dimethyldimethoxysilane [DMDMOS, Si(CH₃)₂(OCH₃)₂] gas source gave us Si–C–O (C-doped SiO_x) films with wide ternary alloy compositions. The dielectric constant of a Si–C film has been evaluated by C–V measurements (at 1 MHz) using Al/Si–C/n-Si(001)/Cu MIS structure. The relative dielectric constant value of a Si–C film was estimated to be 3.0. The resistivity of the Si–C layer with 1 mm diameter and 0.24 μm thickness was estimated to be more than 24.5 Gohm·cm. These results gave us promising characteristics of Si–C and Si–C–O films grown by alkylsilane- and alcoxysilane-based Cat-CVD.     

A thermodynamic model for predicting the stability of thaumasite

A model based on the phase rule has been used to predict the hydrate phase mineralogy and phase proportions from the chemical composition of hydrated Portland cement altered by sulfate attack. The eight-component system on which the model is based consists of CaO, SiO₂, Al₂O₃, Fe₂O₃, MgO, CaSO₄, CaCO₃ and H₂O. The phases included in the model are C–S–H, portlandite, ettringite, hydroxy-AFm, monosulfate, monocarbonate, calcite, gypsum, thaumasite, brucite and the pore solution. The model predicts, among other things, that thaumasite, which forms at low temperature, is unstable in the presence of AFm phases, and can only form in systems that would otherwise form gypsum at higher temperatures. The model has been tested experimentally on cement pastes containing 15 and 30 wt.% limestone dust stored at 5 °C, and which were either mixed with different amounts of gypsum and stored in water, or stored in solutions of different MgSO₄ concentrations. The fully hydrated pastes have been analysed by XRD and ²⁹Si CP/MAS NMR, whilst the remaining solution was analysed by ICP. Thaumasite is only found in regions where it has been predicted to form as a stable phase.     

Chemical vapor deposition of copper–cobalt binary films

Chemical vapor co-deposition of Cu–Co films has been demonstrated using (1,1,1,5,5,5-hexafluoro-2,4-pentanedionato)Cu(II) [Cu(hfac)₂] [hfac=hexafluoroacetylacetonate] and (acetylacetonate)Co(II) [Co(acac)₂] [acac=acetylacetonate] as precursors. The deposition was performed at the substrate temperature of 270°C in a warm-wall impinging jet type reactor. The precursor Co(acac)₂ was sublimed at 140°C to achieve reasonable precursor delivery rates and avoid decomposition of precursor in the sublimator. Films with varying Cu content from 17 wt.% to 98 wt.% were deposited by subliming Cu(hfac)₂ in the temperature range of 40–100°C with a fixed Co(acac)₂ delivery rate. The morphologies and crystallinities of the binary films were strongly dependent on the film stoichiometry. Overall, this study provides insights into the mechanism of Cu–Co binary film formation by CVD.     

Ag glasses based on Zn-phosphate

The partial substitution of Zn²⁺ for Ag⁺ in Ag₄P₂O₇ leads to the formation of a wide glassy domain of composition [Ag₄P₂O₇] _(1−y) [Zn₂P₂O₇] _(y) with 0.20y0.87. The introduction of AgI in these materials results in a new series of glasses of formula [(Ag₄P₂O₇)_(1−y) (Zn₂P₂O₇)_(y)] _(1−X) [AgI] _(x), which domain for the composition y = 0.25 corresponds to 0x 0.64. The structure as well as the thermal and electrical properties of these materials are compared with those of the [AgPO₃] _(1−X) [AgI] _(x) and [Ag₄P₂O₇] _(1−x) [AgI] _(x) glasses.     

Controllable formation of Er–Yb codoped Al2O3 films by the non-aqueous sol–gel method

1 mol%Er³⁺–10 mol%Yb³⁺ codoped Al₂O₃ thin films have been prepared on thermally oxidized SiO₂/Si(110) substrates by a dip-coating process in the non-aqueous sol–gel method from the hydrolysis of aluminum isopropoxide [Al(OC₃H₇)₃] under isopropanol environment. Addition of N,N-dimethylformamide (DMF) as a drying control chemical additive (DCCA) into the sol suppresses formation of the cracks in the Er³⁺–Yb³⁺ codoped Al₂O₃ thin films when the rare-earth ion is doped with a high doping concentration. Homogeneous, smooth and crack-free Er³⁺–Yb³⁺ codoped Al₂O₃ thin films form at the conditions by a molar ratio of 1:1 for DMF:Al(OC₃H₇)₃. A strong photoluminescence spectrum with a broadband extending from 1.400 to 1.700 µm centered at 1.533 µm is obtained for the Er³⁺–Yb³⁺ codoped Al₂O₃ thin films, which is unrelated to the addition of DMF. Controllable formation of the Er³⁺–Yb³⁺ codoped Al₂O₃ thin films may be explained by the fact that the DMF assisted the deprotonation process of Al–OH at the surfaces of gel particles, resulting in enhancement of the degree of polymerization of sols and improvement of the mechanical properties of gel thin films.     

Corrosion of tin in citric acid solution and the effect of some inorganic anions

The corrosion behaviour of tin in different concentrations of citric acid solutions (0.3–1.0 M, pH=1.8) was studied at 30 °C by potentiodynamic technique. The E/I profiles exhibit an active passive behaviour. The active dissolution involves one anodic peak A associated with a dissolution of the metals as Sn(II) species. The passivity is due to the formation of thin film of SnO₂ and or Sn(OH)₄ on the anode surface. The cathodic sweep shows a small peak C related to the reduction of the passive film. The peak current density I_p of peak A increases with increasing both acid concentration and sweep rate.

The effects of adding increasing concentrations of Na₂CrO₄, NaMoO₄, NaNO₃ and NaNO₂ on the corrosion of tin in 0.5 M citric acid at 30 °C were investigated. Both CrO₄²⁻ and MoO₄²⁻ ions inhibit the corrosion of tin and the extent of inhibition enhances with their concentrations. Addition of either NO₃⁻ or NO₂⁻ accelerates the corrosion of tin. NO₃⁻ ions are more aggressive than NO₂⁻ ions.     

Solid-Phase Syntheses of Two Deacetyl-Thymosin β4 Analogues with Substitution at Position 12 and Their Effects on Impaired Blastogenic Response of T Lymphocytes of Uremic Patients

Two deacetyl-thymosin β₄ analogues containing Phe(4Br) or D-Phe(4Br) as position 12 were synthesized by the manual solid-phase method, and their immunological effects on the impaired blastogenic response of phytohemagglutinin-stimulated T lymphocytes of uremic patients with infectious diseases were studied. Bromination of the p-position of Phe¹² resulted in a marked restorative effect on the impaired blastogenic response of T lympocytes compared with that of our synthetic deacetyl-thymosin β₄ The synthetic [Phe(4Br)¹²]deacetyl-thymsin β₄ was approximately equal in potency to our synthetic [Phe(4F)¹²]deacetyl-thymosin β₄ in uremic patients, but the other analogue, [D-Phe(4Br)¹²]deacetyl-thymosin β₄, had no effect.     

Evidence for η6 Coordination to a Fullerene

Evidence for the first η⁶ derivative of a fullerene, [MoC₆₀F₁₈(CO)₃] has been obtained from reaction between [Mo(CH₃CN)₃(CO)₃] and C₆₀F₁₈.     

On the structure of the NiO–Al2O3 systems, studied by diffuse-reflectance spectroscopy

Diffuse-reflectance spectra of the NiO–Al₂O₃ systems in the 350–800 nm spectral domain are analysed. Two types of Ni²⁺complexes in γ-Al₂O₃ have been found at low concentrations (<5%): [Ni²⁺6O²⁻] and [Ni²⁺4O²⁻] with octahedral (O_h) and tetrahedral (T_d) symmetries, respectively. Coexistence of these two complexes is discussed in connection with the sample preparation and their thermal treatment.     

Spectroscopic Evidence for Anionic Coordination Complexes of the Transition Metals with C70 and the Higher Fullerenes C76, C78, C82, C84, C86, C90, and C92

The carbonylate anions [M(CO)₅]^- (M = Mn, Re), [Co(CO)₄]^-, [CpFe(CO)₂]^-, and [CpM(CO)₃]^- (M = Mo, W) react with C₇₀ via single electron transfer processes to give, respectively, the corresponding 17-electron, metal-centered radicals Co(CO)₄, M(CO)₅ (M = Mn, Re), CpFe(CO)₂, and CpM(CO)₃ (M = Mo, W) in addition to the radical anion C₇₀^-. In secondary thermal or photochemical processes, the metal-centered radicals Co(CO)₄ and M(CO)₅ (M = Mn, Re) combine with the C₇₀^- to form the new η²-C₇₀ complexes [Co(CO)₃(η²-C₇₀)]^- and [M(CO)₄(η²-C₇₀)]^-. However, the metal-centered radicals CpM(CO)₃ (M = Mo, W) require photolysis to react with C₇₀^- to form [CpM(CO)₂(η²-C₇₀)]^-, whereas neither thermolysis nor photolysis induces reaction between CpFe(CO)₂ and C₇₀^-. The photochemical reaction of [Mn(CO)₅]^- with a mixture of higher fullerenes known to contain at least C₇₆, C₇₈, C₈₄, C₈₆, and C₉₀ resulted similarly in the formation of the higher fullerene complexes [Mn(CO)₄(η²-C_n)]^- (n = 76, 78, 80, 82, 84, 86, 88, 90, 92, 96, and 98), all identified using electrospray mass spectrometry.     

Standing-wave solutions of the Enneper (sine-Gordon) equation

The present paper investigates the real solutions of the partial differential equations (∂²ω/∂u²) − (∂²ω/∂ν²) = sin ω (Enneper or sine-Gordon equation) that are of the FORM = F(|₁(u) · |₂(ν)). In the application of the Enneper equations to crystal physics such solutions may represent standing waves. A complete classification of these solutions and its degenerate cases is given.     

Formation of Transparent and Photo Conducting Films by High Temperature Chemical Conversion of Solution Grown Precursor Films

The formation of photoconducting ZnO and transparent conducting CdO films by high temperature oxidation and thermal decomposition of chemically deposited ZnS and Cd(OH)₂ precursor films respectively is reported. The ZnS to ZnO and Cd(OH)₂ to CdO conversions were confirmed by x-ray diffraction (XRD)₂ electrical and optoelectronic studies. As deposited ZnS and Cd(OH)₂ films exhibited very low dark conductivity and no photoconductivity. Air oxidation of ZnS films at about 400°C for at least 15 minutes converted them to ZnO films with higher dark and photoconductivity. Cd(OH)₂ to CdO conversion occurred at about 300°C. CdO films exhibited a dark conductivity of the order of 10³ (Ωcm)^-1 and an optical transmittance in the range of 90%. These characteristics of ZnO and CdO films make them suitable candidates for the development of low cost photoconductors and solar cell structures.     

Si cross-polarization magic-angle spinning NMR spectroscopy––an efficient tool for quantification of thaumasite in cement-based materials

²⁹Si{¹H} cross-polarization (CP) magic-angle spinning (MAS) NMR spectroscopy is a powerful and reliable tool for the quantification of thaumasite in cement-based materials. The most efficient method for quantifying thaumasite from ²⁹Si{¹H} CP/MAS NMR spectra is described and it is shown that the method allows detection of thaumasite contents below approximately 10 wt.% with a relative precision of 15% and contents above 10 wt.% with a relative precision of 10%. The applicability of ²⁹Si{¹H} CP/MAS NMR for quantification of thaumasite is demonstrated for different Portland cement pastes and shows that thaumasite contents as low as 0.2–0.5 wt.% can be detected in cementitious systems with low concentrations of paramagnetic impurities. For a Portland cement containing various amounts of limestone dust and stored at 5 °C in a MgSO₄ solution, large quantities of thaumasite have been detected. Furthermore, the quantity of thaumasite is found to be less sensitive to the amount of added limestone dust. For samples of a Portland cement with a fixed content of limestone dust but different quantities of added gypsum, the increased contents of gypsum are observed to result in larger quantities of thaumasite after prolonged hydration.     

A torsion–effusion study on the sublimation of Cu2Te

The sublimation of Cu₂Te was studied and its vapor pressure was measured by the torsion method. In the covered temperature range, the temperature dependence of the total vapor pressure can be expressed by the following equation: log p (kPa)=(6.17±0.20)−(11 680±300)(K/T) (1084–1234 K). The sublimation process of Cu₂Te is incongruent, and Te(g) and Te₂(g) being the only gaseous species present in the vapor, the partial sublimation reactions were studied: Cu₂Te(s)→2Cu(s)+Te(g), 2Cu₂Te(s)→4Cu(s)+Te₂(g). The standard sublimation enthalpies of these reactions, Δ_rH⁰(298)=254±10 and 248±8 kJ, respectively, were derived by the second- and third-law treatment of the pressure data. The heat of formation of Cu₂Te, Δ_fH⁰(298)=−43±6 kJmol⁻¹, was also derived.     

Formation of nanocrystalline structure of Ti–6Al–4V alloy by cyclic hydrogenation–dehydrogenation treatment

Ti–6Al–4V (Ti64) sheet specimens were cathodically hydrogenated in sulfuric acid solution at ambient conditions. The hydrogenated specimens were then sent to go through the designed thermohydrogen processing (THP) twice to obtain a nano-sized grain structure. The average grain size of resulted microstructure was found to be 10–20 nm obtained by TEM. Qualitative and quantitative analyses performed by employing X-ray diffractometry (XRD) and elemental analysis (EA) showed that the addition of As₂O₃ as hydrogenation promoter in electrolyte significantly increased the hydrogen uptake. The high concentration of hydrogen arising from promoter action is the key factor in grain refinement. The optimal processing parameter found for grain-refining Ti64 was: (1) electrolytic hydrogenation at 100 mA cm⁻² for 3 h in 1 N H₂SO_4(aq) by adding 0.1 g L⁻¹ As₂O₃; (2) β transformation carried out at 850 °C for 1 h in air furnace, followed by a furnace cooling to 590 °C and held for 6 h; (3) oxide film removed and then dehydrogenated at 650 °C and 1.0 × 10⁻⁶ Torr for 10 h; (4) repeated the same processes once more.     

Hartree–Fock study of near-edge gap states in CaF2 with Na, Cl or Sr impurities

The energy of formation and electronic structure of Na⁺, Cl⁻ and Sr²⁺ impurity centers in CaF₂ have been computed using ab initio Hartree–Fock theory and the supercell approach. The work extends and complements recent results [Solid State Commun. 118 (2001) 569] for Mg²⁺ as a substitutional impurity in CaF₂. For Na⁺ substituting for Ca²⁺ [S(Na)], charge compensation by an F⁻ vacancy [V(F)] or by a second, interstitial Na⁺ [I(Na)] are both considered. In all cases, geometry optimization is done by relaxing the positions of nearest- and next-nearest-neighbors to minimize the total energy. After correction for electron correlation, the energies of formation increase in the order Mg²⁺2+−+ results are in agreement with previous Mott–Littleton formation energies. Ion charges, charge density maps and Mulliken bond populations are obtained to show the nature of bonding in the vicinity of the defect. Na⁺ leads to states just above the CaF₂ valence band maximum (VBM), and Na⁺ (and also Mg²⁺) produce states just below the conduction band minimum. The results are in qualitative agreement with available optical data for Na⁺ and Mg²⁺ impurity effects on CaF₂ near-edge absorption but show that gap states are important in addition to perturbed excitons. A Cl⁻ impurity yields a narrow band of states above the VBM which may significantly affect the deep-ultraviolet transmission of CaF₂. Sr²⁺ does not appear to produce states in the CaF₂ gap.     

Influence of rare-earth oxides on structure and crystallization properties of Bi2O3–B2O3 glass

Bi₂O₃·B₂O₃ glasses doped with rare-earth oxides (RE₂O₃) (RE³⁺ = La³⁺, Pr³⁺, Sm³⁺, Gd³⁺, Er³⁺ and Yb³⁺) were prepared by the melting–quenching method. The relationships between composition and properties were demonstrated by IR, DSC, XRD and SEM analysis. The results show that the network structure resembles that of undoped Bi₂O₃·B₂O₃ glass, composing of [BO₃], [BO₄] and [BiO₆] units. RE₂O₃ stabilizes the glass structure as a modifier. Transition temperature (T_g) increases linearly with cationic field strength (CFS) of RE³⁺. La₂O₃, Pr₂O₃, Sm₂O₃ and Gd₂O₃ are benefit to promote the formation of BiBO₃ crystal. When Er₂O₃ and Yb₂O₃ are introduced, respectively, the main crystal phase changes to Bi₆B₁₀O₂₄. Transparent surface crystallized samples are obtained by reheating at 460–540 °C for 5 h. In this case, needle like BiBO₃ crystal or rare-earth-doped BiBO₃ crystal (Pr_xBi_1−xBO₃ and Gd_xBi_1−xBO₃) are observed, which is promising for non-linear optical application.