Organic base‐catalyzed sol–gel route to prepare PMMA–silica hybrid materials

A series of sol–gel‐derived organic–inorganic hybrid materials that comprise organic poly(methyl methacrylate) (PMMA) and inorganic silica (SiO₂) was successfully prepared using aniline as an organic base catalyst to catalyze the sol–gel reactions of tetraethylorthosilicate (TEOS). Aniline was adopted not only as a catalyst but also as a dispersing agent during the preparation of the hybrid materials. The as‐prepared hybrid materials were then characterized using transmission electron microscopy, SEM/energy dispersive X‐ray spectroscopy and Fourier transform infrared spectroscopy. The characteristic temperatures (including T_d and T_g) of the hybrid materials slightly exceeded those of neat PMMA, as revealed from thermogravimetric analysis and differential scanning calorimetry evaluations. Studies of the protection against corrosion demonstrated that the hybrid coatings all improved the protection performance on cold‐rolled steel coupons relative to that of neat PMMA coatings, according to measurements of electrochemical corrosion parameters. Additionally, incorporating silica particles into the polymer may effectively reduce the gas permeability of the polymer membrane. Reducing the size of silica particles (at the same silica feeding) further improved the gas barrier property. Optical clarity studies indicated that introducing silica particles into the PMMA matrix may slightly reduce the optical clarity of the films/membranes, as determined by UV‐visible transmission spectroscopy. The contact angle of H₂O of the hybrid films increased with the amount of aniline. Copyright © 2006 Society of Chemical Industry Society of Chemical Industry     

Preparation of chitosan‐graft‐(methyl methacrylate)/Ag nanocomposite with antimicrobial activity

It has been found that composites of chitosan (CS) and Ag nanoparticles can exhibit excellent antibacterial activities. However, the weak mechanical performances of these composite materials limit their wide application. Grafting of vinyl monomers onto CS is one of the most effective methods to improve the performances of CS without sacrificing its properties. A nanocomposite of chitosan‐graft‐(methyl methacrylate) (CS‐g‐MMA) containing Ag nanoparticles was prepared by in situ chemical reduction of Ag ions in an aqueous acetic acid solution of CS and graft copolymerization of MMA onto CS. Transmission electron micrographs, X‐ray diffraction patterns and UV‐visible spectra of the nanocomposite confirmed the formation of Ag nanocrystals. X‐ray photoelectron spectroscopy proved that Ag? O bonds exist in the composite. Thermogravimetric analysis/differential scanning calorimetry showed that the decomposition temperature of CS was 319.8 °C while that of the CS‐g‐MMA/Ag composite shifted to a higher temperature of 422.1 °C. Antimicrobial experiments showed that the antimicrobial rates of the CS‐g‐MMA/Ag composite to E. coli, B. subtilis, S. aureus and P. aeruginosa were 93–98%. CS molecules can act as stabilizing agents to prevent the aggregation of Ag nanoparticles in the process of synthesizing CS‐g‐MMA/Ag nanocomposites. The antimicrobial activity of the as‐prepared nanocomposites is higher than that of CS alone. Copyright © 2009 Society of Chemical Industry     

Hydroxyethyl chitosan‐g‐poly(acrylic acid‐co‐sodium acrylate) superabsorbent polymers

A novel hydroxyethyl chitosan‐g‐poly(acrylic acid‐co‐Sodium Acrylate) (HECTS‐g‐(PAA‐co‐PSA)) superabsorbent polymer was prepared through graft copolymerization of acrylic acid and sodium acrylate onto the chain of hydroxyethyl chitosan. The structure of the polymer was characterized by FTIR. By studying the water absorption of the polymer synthesized under different conditions, the optimal conditions for synthesizing the polymer with the highest swelling ratio was defined. This superabsorbent polymer was further treated by the solvent precipitation method and by the freeze‐drying method. We found that the water absorption rate of the treated polymer was greatly increased and the microstructure of the treated polymer was changed from small pores to loose macro pores. The swelling processes of the polymers before and after modification fit first‐order dynamic processes. The amount of the residual acrylic acid was greatly decreased after treatments. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

A novel method for preparing silver/poly(siloxane‐b‐methyl methacrylate) nanocomposites with multiple properties in the DMF‐toluene mixture solvent

A novel method for preparing silver/poly(siloxane‐b‐methyl methacrylate) (Ag/(PDMS‐b‐PMMA)) hybrid nanocomposites was proposed by using the siloxane‐containing block copolymers as stabilizer. The reduction of silver nitrate (AgNO₃) was performed in the mixture solvent of dimethyl formamide (DMF) and toluene, which was used to dissolve double‐hydrophobic copolymer, as well as served as the powerful reductant. The presence of the PMMA block in the copolymer indeed exerted as capping ligands for nanoparticles. The resultant nanocomposites exhibited super hydrophobicity with water contact angle of 123.3^° and the thermogravimetry analysis (TGA) revealed that the resultant nanocomposites with more PDMS were more heat‐resisting. Besides, the antimicrobial efficiency of the most desirable nanocomposite (Ag/PDMS₆₅‐b‐PMMA₃₀ loaded with 7.3% silver nanoparticle) could reach up to 99.4% when contacting with escherichia coli within 120 min. As a whole, the resultant nanocomposites by the integration of excellent properties of silver nanoparticles as well as siloxane‐block copolymers can be a promising for the development of materials with hydrophobic, heat‐resisting and outstanding antibacterial properties from the chemical product engineering viewpoint. © 2013 American Institute of Chemical Engineers AIChE J, 59: 4780–4793, 2013     

Antibacterial activity and antistatic composites of polyester/Ag‐SiO2 prepared by a sol–gel method

Poly(butylene adipate‐co‐terephthalate) (PBAT) composites containing silver‐silica (Ag‐SiO₂) were prepared using an in‐situ sol–gel process. Maleic anhydride‐grafted PBAT (PBAT‐g‐MA) and multihydroxyl‐functionalized Ag‐SiO₂ were used to improve the compatibility and dispersibility of Ag‐SiO₂ within the PBAT matrix. The composites were characterized morphologically using transmission electron microscopy and chemically using Fourier transform infrared spectrometry. The existence of Ag‐SiO₂ nanoparticles on the substrate was confirmed by the ultraviolet–visible absorption spectra. The antibacterial and antistatic properties of the composites were evaluated whether SiO₂ enhanced the electrical conductivity was tested as well as whether Ag enhanced the antibacterial activity of the PBAT‐g‐MA/SiO₂ or PBAT/SiO₂ composites. The PBAT‐g‐MA/SiO₂ or PBAT/SiO₂ composite that contained Ag had better antibacterial activity (more than 1.3‐fold). The functionalized PBAT‐g‐MA/Ag‐SiO₂ composite can markedly enhanced antibacterial and antistatic properties due to the carboxyl groups of maleic anhydride, which acted as coordination sites for the Ag‐SiO₂ phase, allowing the formation of stronger chemical bonds. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Morphology and mechanical properties of natural rubber latex films modified by exfoliated Na‐montmorillonite/polyethyleneimine‐g‐poly (methyl methacrylate) nanocomposites

Na‐montmorillonite/polyethyleneimine‐g‐poly(methyl methacrylate) (Na‐MMT/PEI‐g‐PMMA) nanocomposite latexes were prepared by soap‐free emulsion polymerization in the aqueous suspension of Na‐MMT. The exfoliated morphology of the nanocomposites was confirmed by XRD and TEM. With the aim of improving morphology and mechanical properties of natural rubber latex (NRL) films, the synthesized Na‐MMT/PEI‐g‐PMMA nanocomposites were mixed with NRL by latex compounding technology. The results of SEM and AFM analysis showed that the surface of NRL/Na‐MMT/PEI‐g‐PMMA film was smoother and denser than that of pristine NRL film while Na‐MMT was dispersed uniformly on the fracture surface of the modified films, which suggested the good compatibility between NRL and Na‐MMT/PEI‐g‐PMMA. The tensile strength of NRL/Na‐MMT/PEI‐g‐PMMA films was increased greatly by 85% with 10 phr Na‐MMT/PEI‐g‐PMMA when Na‐MMT content was 3 wt % and the elongation at break also increased from 930% to 1073% at the same time. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43961.     

Synthesis of poly(aryl ether sulfone)‐graft‐polystyrene and poly(aryl ether sulfone)‐graft‐[polystyrene‐block‐poly(methyl methacrylate)] through atom transfer radical polymerization

A new graft copolymers poly(aryl ether sulfone)‐graft‐polystyrene (PSF‐g‐PS) and poly(aryl ether sulfone)‐graft‐[polystyrene‐block‐poly(methyl methacrylate)] (PSF‐g‐(PS‐b‐PMMA)) were successfully prepared via atom transfer radical polymerisation (ATRP) catalyzed by FeCl₂/isophthalic acid in N,N‐dimethyl formamide. The products were characterized by GPC, DSC, IR, TGA and NMR. The characterization data indicated that the graft copolymerization was accomplished via conventional ATRP mechanism. The effect of chloride content of the macroinitiator on the graft copolymerization was investigated. Only one glass transition temperature (T_g) was detected by DSC for the graft copolymer PSF‐g‐PS and two glass transition temperatures were observed in the DSC curve of PSF‐g‐(PS‐b‐PMMA). The presence of PSF in PSF‐b‐PS or PSF‐g‐(PS‐b‐PMMA) was found to improve thermal stabilities. © 2002 Society of Chemical Industry     

Antibacterial oil‐based polyurethane films for wound dressing applications

As an alternative to petroleum‐based polyol, hydroxyl containing material was prepared from linseed oil for polyurethane synthesis. Hexamethylene di‐isocyanate (HMDI) and/or 4, 4′‐methylene diphenyl di‐isocyanate (MDI) were used as isocyanate source. The polymerization reaction was carried out without catalyst. Polymer films were prepared by casting‐evaporation technique. The MDI/HMDI‐based polyurethane and its films had higher T_g and better thermal property than that of the HMDI‐based one because of the existence of benzene ring in the polymer chain. Static water contact angle was determined to be 74° and 77.5° for HMDI and MDI/HMDI‐based films, respectively. Water adsorption was found to be around 2.6–3.6% for both films. In vitro degradation of polyurethanes in phosphate buffered saline at 37°C was investigated by gravimetric method. Fourier transform infrared spectroscopy and scanning electron microscopy were used for confirmation of degradation on the polymer surface. The degradation rate of the HMDI‐based polyurethane film was found higher than that of the MDI/HMDI‐based film. Both the direct contact method and the MMT test were applied for determination of cytotoxicity of polymer films, and the polyurethane films investigated here was not cytotoxic. Silver‐containing films were prepared using Biocera A® as filler and were screened for their antibacterial performance against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and/or Bacillus subtilis. The films prepared with and without Biocera A® exhibited antibacterial activity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Sol‐gel preparation and properties of Ag‐containing bioactive glass films on titanium

Ag‐containing bioactive glass films (Ag/Ca atomic ratios of 0, 5% and 10%) were sol‐gel prepared for bioactive and antibacterial modification of titanium. The gel powders calcined at 610°C are mainly amorphous confirmed by x‐ray diffraction, but small diffraction peaks of Ca₃SiO₅ and silver are detected. The film surface is porous with the pore size of ~200 nm. Silver‐rich sub‐micro particles with sizes of 100‐480 nm are present at the surface of Ag‐glass films. CaP phase, metallic silver and silica are detected by x‐ray photoelectron spectroscopy. The mean apparent bonding strength of the films is as high as 21±1 MPa measured by the pull‐off test. The potentiodynamic polarization test shows that the coated samples have better corrosion resistance than the polished sample. The Ag‐glass coatings and their wafer samples exhibit antibacterial activity against S. aureus. The coated samples are covered by apatite layer after soaked in the simulated body fluid for 2 weeks, demonstrating their bioactivity.     

Graft copolymerization of vinyl monomers bearing positive charges or episulfide groups onto loofah fibers and their antibacterial activity

Ion exchange fibers with quaternary ammonium groups, phosphonium groups, or thiol groups etc., were prepared by graft copolymerization of vinyl monomers on loofah fiber which is one of the natural fibers. Methacryloyloxyethyl trimethyl ammonium chloride (METAC), tributyl‐4‐vinylbenzyl phosphonium chloride (TRVB), and epithiopropyl methacrylate (ETMA) were used as vinyl monomers. Graft copolymerization of METAC on loofah could be carried out in water using ammonium cerium (IV) nitrate. Graft copolymerization of TRVB and ETMA on loofah could be performed in water and water‐dimethylsulfoxide mixed solution using hydrogen peroxide as an initiator, respectively. The optimum conditions for each graft copolymerization were investigated in detail. Ion exchange fibers (LE‐TTA) having both thiol groups and triethylenetetramine side chains were obtained by treatment of L‐g‐ETMA (LE) with triethylenetetramine. LE and LE‐TTA had high adsorption ability for silver ions. LE‐TTA‐Ag exhibited high antibacterial activity against E. Eoli and S. aureus, but LE‐Ag did not. On the other hand, L‐g‐METAC and L‐g‐TRVB also exhibited high antibacterial activity against E. Eoli and S. aureus. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1077–1086, 2000     

Poly(methyl methacrylate)‐grafted cellulose nanocrystals: One‐step synthesis,nanocomposite preparation,and characterization

Cellulose nanocrystals (CNCs) are ideal reinforcing agents for polymer nanocomposites because they are lightweight and nano‐sized with a large aspect ratio and high elastic modulus. To overcome the poor compatibility of hydrophilic CNCs in non‐polar composite matrices, we grafted poly(methyl methacrylate) (PMMA) from the surface of CNCs using an aqueous, one‐pot, free radical polymerization method with ceric ammonium nitrate as the initiator. The hybrid nanoparticles were characterized by CP/MAS NMR, X‐ray photoelectron spectroscopy, infrared spectroscopy, contact angle, thermogravimetric analysis, X‐ray diffraction, and atomic force microscopy. Spectroscopy demonstrates that 0.11 g/g (11 wt %) PMMA is grafted from the CNC surface, giving PMMA‐g‐CNCs, which are similar in size and crystallinity to unmodified CNCs but have an onset of thermal degradation 45 °C lower. Nanocomposites were prepared by compounding unmodified CNCs and PMMA‐g‐CNCs (0.0025–0.02 g/g (0.25–2 wt %) loading) with PMMA using melt mixing and wet ball milling. CNCs improved the performance of melt‐mixed nanocomposites at 0.02 g/g (2 wt %) loading compared to the PMMA control, while lower loadings of CNCs and all loadings of PMMA‐g‐CNCs did not. The difference in Young's modulus between unmodified CNC and polymer‐grafted CNC composites was generally insignificant. Overall, ball‐milled composites had inferior mechanical and rheological properties compared to melt‐mixed composites. Scanning electron microscopy showed aggregation in the samples with CNCs, but more pronounced aggregation with PMMA‐g‐CNCs. Despite improving interfacial compatibility between the nanoparticles and the matrix, the effect of PMMA‐g‐CNC aggregation and decreased thermal stability dominated the composite performance.     

Antibacterial activities of novel nanocomposite biofilms of chitosan/phosphoramide/Ag NPs

Novel nanocomposite films of chitosan/phosphoramide/Ag NPs were prepared containing 1–5% of silver nanoparticles. The Ag NPs were synthesized according to the citrate reduction method. The XRD and SEM analysis of Ag NPs, chitosan (CS), phosphoramide (Ph), CS/Ph, CS/Ag NPs films and the nanocomposite films 1–5 containing CS/Ph/1–5% Ag NPs were investigated. The in vitro antibacterial activities were evaluated against four bacteria including two Gram‐positive Staphylococcus aureus (S. aureus), Bacillus cereus (B. cereus) and two Gram‐negative Escherchia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa) bacteria. Results revealed greater antibacterial effects of the films against Gram‐positive bacteria. Also, nanocomposite films containing higher percent of Ag NPs showed more antibacterial activities. POLYM. COMPOS. 36:454–466, 2015. © 2014 Society of Plastics Engineers     

Highly reversible and repeatable PTCR characteristics of PMMA/Ag‐coated glass bead composites based on CTE mismatch phenomena

Positive temperature coefficient of resistivity (PTCR) behavior of poly(methyl methacrylate) PMMA/silver (Ag)‐coated glass bead composites has been investigated with reference to the conventional PMMA/carbon black (CB) composites. The PMMA/CB composites showed a sudden rise in resistivity (PTC trip) at 115°C, close to the glass transition temperature (T _g, 113°C) of the PMMA. However, the PTC trip temperature (92°C) of PMMA/Ag‐coated glass bead composites was appeared well below the T _g of PMMA. The room temperature resistivity and PTC trip temperature of the composites were also very much stable upon thermal cycling. Addition of 1 phr of nanoclay increased the PTC trip temperature of PMMA/CB composites to 120°C, close to the T _g (118°C) of PMMA/clay nanocomposites, while PMMA/clay/Ag‐coated glass bead nanocomposites showed the PTC trip at 98°C. We proposed that the mismatch in coefficient of thermal expansion (CTE) between PMMA and glass beads played a key role that led to a disruption in continuous network structure of Ag‐coated glass beads even at a temperature well below the T _g of PMMA. The decrease in dielectric permittivity of PMMA/Ag‐coated glass bead composites on increasing frequency indicated possible use of the PTC composites as dielectric material. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Poly(ε‐caprolactone) composites containing gentamicin‐loaded β‐tricalcium phosphate/gelatin microspheres as bone tissue supports

In this work, novel antibacterial composites were prepared by using poly(ε‐caprolactone) (PCL) as the main matrix material, and gentamicin‐loaded microspheres composed of β‐tricalcium phosphate (β‐TCP) and gelatin. The purpose is to use this biodegradable material as a support for bone tissue. This composite system is expected to enhance bone regeneration by the presence of β‐TCP and prevent a possible infection that might occur around the defected bone region by the release of gentamicin. The effects of the ratio of the β‐TCP/gelatin microspheres on the morphological, mechanical, and degradation properties of composite films as well as in vitro antibiotic release and antibacterial activities against Escherichia coli and Staphylococcus aureus were investigated. The results showed that the composites of PCL and β‐TCP/gelatin microspheres had antibacterial activities for both bacteria. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of polypropylene graft copolymers from a hydroxyl‐groups‐containing polypropylene precursor via atom‐transfer radical polymerization

Isotactic polypropylene graft copolymers, isotactic[polypropylene‐graft‐poly(methyl methacrylate)] (i‐PP‐g‐PMMA) and isotactic[polypropylene‐graft‐polystyrene] (i‐PP‐g‐PS), were prepared by atom‐transfer radical polymerization (ATRP) using a 2‐bromopropionic ester macro‐initiator from functional polypropylene‐containing hydroxyl groups. This kind of functionalized propylene can be obtained by copolymerization of propylene and borane monomer using isospecific MgCl₂‐supported TiCl₄ as catalyst. Both the graft density and the molecular weights of i‐PP‐based graft copolymers were controlled by changing the hydroxyl group contents of functionalized polypropylene and the amount of monomer used in the grafting reaction. The effect of i‐PP‐g‐PS graft copolymer on PP‐PS blends and that of i‐PP‐g‐PMMA graft copolymer on PP‐PMMA blends were studied by scanning electron microscopy. Copyright © 2006 Society of Chemical Industry     

Acetylsalicylic acid loading and release studies of the PMMA‐g‐polymeric oils/oily acids micro and nanospheres

Poly(methyl methacrylate) (PMMA) and PMMA copolymers derived from plant oils (Polylinseed oil‐g‐PMMA, Polysoybean oil‐g‐PMMA, Polylinoleic acid‐g‐PMMA (PLina‐g‐PMMA) and Polyhydroxy alkanoate‐ sy‐g‐Polylinoleic acid‐g‐PMMA (PHA‐g‐PLina‐g‐PMMA)) as hydrophobic polymers, a series of hydrophobic microsphere or nanosphere dispersions, were prepared by the emulsion/solvent evaporation method. The diameters of the nanospheres and microspheres were measured by dynamic light scattering with a zetasizer, optically and by scanning electron microscopy. The magnetic quality of the microspheres was determined by the electron spin resonance technique. Acetylsalicylic acid (aspirin, ASA) was used as a model drug and loaded into the microspheres during the preparation process. The effect of the stirring rate over the size and size distribution of the micro/nanospheres was evaluated, and the effects of copolymer types derived from plant oil/oily acids and the copolymer/drug ratios were evaluated. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation,characterization, and antibacterial properties of silver nanoparticles embedded into cellulose aerogels

In this article, highly loaded silver (Ag) nanoparticles with mean diameter of about 7.83 nm were synthesized by reducing Ag ions by NaBH₄ with strong reducibility, and homogeneously embedded into cellulose aerogels without obvious reunion. The as‐prepared nano‐Ag/cellulose (NAC) aerogels maintained nanoporous and multiscale morphology similar to the pure cellulose aerogels, and showed strong antibacterial activities for both Escherichia coli (Gram negative) and Staphylococcus aureus (Gram positive). Meanwhile, after the incorporation of Ag nanoparticles, NAC aerogels also displayed more superior thermal stability. Thus, the novel NAC aerogels might be expected to be used as various biomedical applications, especially green heat‐resistant high‐performance antibacterial materials. POLYM. COMPOS. 37:1137–1142, 2016. © 2014 Society of Plastics Engineers     

Preparation and characterization of a novel gelatin–poly(vinyl alcohol) hydrogel film loaded with Zataria multiflora essential oil for antibacterial–antioxidant wound‐dressing applications

This study was performed to evaluate the properties of poly(vinyl alcohol) (PVA), gelatin, and PVA–gelatin dispersions and films enriched with Zataria multiflora essential oil (ZO). The results reveal that the ζ potential, particle size, and viscosity values and the antioxidant and antibacterial activities of the dispersions changed significantly with the addition of ZO to the polymer matrix. Changes in the properties of the dispersions suggested the presence of interactions between PVA or gelatin and ZO. Such interactions could affect the mechanical and water‐barrier properties of the films. ZO induced remarkable decreases in the tensile strength, elastic modulus, and swelling and increases in the elongation at break, solubility, and water‐vapor permeability of the films. Scanning electron microscopy analyses proved the impact of ZO on the film morphology, which affected the film properties, including the mechanical and water‐barrier properties. The addition of ZO to the polymer led to a coarse film microstructure because of the hydrophobic ZO aggregates, which produced discontinuities in the film matrix. ZO considerably increased the antioxidant and antibacterial activities of the dispersions. Pseudomonas aeruginosa was the most resistant bacteria. The improved antioxidant and antimicrobial activities of the PVA–ZO and gelatin–ZO indicated that such products could effectively be used as wound dressings. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45351.     

Rheological,thermal, and curing properties of natural rubber‐g‐poly(methyl methacrylate)

Graft copolymers of NR and PMMA (i.e., NR‐g‐PMMA) were prepared with the bipolar redox initiation system, using various percentages of molar ratios of NR/MMA at 95/5, 90/10, 80/20, 70/30, and 60/40. It was found that the Mooney viscosity, shear stress, and shear viscosity of the NR‐g‐PMMA increased with an increase in the molar ratio of MMA used in the graft copolymerization. This may be attributed to an increasing trend of the chemical interaction between polar functional groups within the grafted PMMA molecules. Furthermore, a decreasing trend of storage moduli was observed with increasing molar ratios of MMA. The glass transition temperature was obtained from the tan δ curves. We found a slightly increasing trend of the T_g's with an increase in molar ratios of MMA used in the grafting reaction. The NR‐g‐PMMA was later compounded using TBBS as an accelerator. With an increase in molar ratios of MMA in the grafting reaction, we observed an increasing trend of minimum torque, maximum torque, cure time, and scorch time, but quite similar levels of torque difference and crosslink density. Furthermore, the tensile strength of the NR‐g‐PMMA gum vulcanizate increased with an increase in molar ratios of MMA, whereas the elongation at break decreased. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1600–1614, 2006     

PMMA‐grafted‐silica/PVC nanocomposites: Mechanical performance and barrier properties

Poly(vinyl chloride) (PVC)/SiO₂ nanocomposites were prepared via melt mixture using a twin‐screw mixing method. To improve the dispersion degree of the nanoparticles and endow the compatibility between polymeric matrix and nanosilica, SiO₂ surface was grafted with polymethyl methacrylate (PMMA). The interfacial adhesion was enhanced with filling the resulting PMMA‐grafted‐SiO₂ hybrid nanoparticles characterized by scanning electron microscopy. Both storage modulus and glass transition temperature of prepared nanocomposites measured by dynamic mechanical thermal analysis were increased compared with untreated nanosilica‐treated PVC composite. A much more efficient transfer of stresses was permitted from the polymer matrix to the hybrid silica nanoparticles. The filling of the hybrid nanoparticles caused the improved mechanical properties (tensile strength, notched impact strength, and rigidity) when the filler content was not more than 3 wt %. Permeability rates of O₂ and H₂O through films of PMMA‐grafted‐SiO₂/PVC were also measured. Lower rates were observed when compared with that of neat PVC. This was attributed to the more tortuous path which must be covered by the gas molecules, since SiO₂ nanoparticles are considered impenetrable by gas molecules. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008