Shear viscosity of nuclear matter

This paper reports my recent studyIll on the shear viscosity of neutron-rich nuclear matter from a relaxation time approach. An isospin- and momentum-dependent interaction is used in the study. Dependence of density, temperature, and isospin asymmetry of nuclear matter on its shear viscosity have been discussed. Similar to the symmetry energy, the symmetry shear viscosity is defined and its density and temperature dependence are studied.     

Apparent softening of the symmetry energy with the inclusion of non-nucleonic components in nuclear matter

Apparent softening of the symmetry energy with the inclusion of hyperon and quark degrees of freedom is demonstrated by the fact that the phase transition causes the change of the interaction and the suppression of nucleon fractions. The demonstration is fulfilled in the relativistic mean-field model.     

Probing the density dependence of the symmetry energy with central heavy ion collisions

An improved isospin dependent Boltzmann Langevin model, in which the inelastic channels and momentum dependent interactions are incorporated, is used to investigate the high-density behavior of nuclear symmetry energy. By taking several forms of nuclear symmetry energy, we calculate the time evolutions of neutron over proton ratio, π ultiplicity and π-/π＋ ratio, and the kinetic energy and transverse momentum spectra of π-/π＋ ratio in the heavy ion collisions at 400A MeV. It is found that the neutron over proton ratio and π-/π＋ ratio are very sensitive to the nuclear symmetry energy, and the π- is more sensitive to the nuclear symmetry energy than the π＋. A supersoft symmetry energy results in a larger π-/π＋ ratio.     

Two-proton sequential decay from excited states of 18Ne

Two-proton radioactivity from 18Ne is discussed in terms of sequential decay. The branch ratios for one- proton emission from excited states are calculated, which including spectroscopic factors, obtained from a Shell- model calculation with realistic interactions. The branch ratios show that the two-proton emission from the 1 state of 16Ne at 7.94 MeV is most likely to go through the sequential decay. The same mechanism is discussed for other excited states at higher energy by different interactions.     

Density isomer of nuclear matter in an equivalent mass approach

The equation of state of symmetric nuclear matter is studied with an equivalent mass model. The equivalent mass of a nucleon has been expanded to order 4 in density. We first determine the first-order expansion coefficient in the quantum hadron dynamics, then calculate the coefficients of the second to fourth order for the given binding energy and incompressibility at the normal nuclear saturation density. It is found that there appears a density isomeric state if the incompressibility is smaller than a critical value. The model dependence of the conclusion has also been checked by varying the first-order coefficient.     

Spallation reaction and the probe of nuclear dissipation with excitation energy at scission

We study in the framework of the Langevin model the influence of initial excitation energy （E＊） of Hg compound nuclei （CNs） on the sensitivity of the excitation energy at scission （E~c） to the nuclear friction strength （fl）. It is shown that the sensitivity is enhanced substantially with increasing E＊. Moreover, we find that the significant sensitivity of E＊c to fl at high E＊ is little affected by a marked difference in the neutron-to-proton ratio ofa CN and in its size and fissility. Our findings suggest that, on the experimental side, a measurement of E~c in energetic proton-induced spallation reactions can provide not only a sensitive but also a robust probe of nuclear dissipation in fission of highly excited nuclei. Further development of a suitable approach to spallation reaction is discussed.     

Comparison between nuclear thermometers in central Xe＋Sn collision

The temperature of fragmenting source in central heavy-ion collisions at Fermi energy is investigated by the isospin-dependent quantum molecular dynamics model in combination with the statistical decay model GEMINI. Five different nuclear thermometers are used to extract nuclear temperature. We find that the He and Li isotope temperature reaches a plateau at about 70-100 MeV/nucleon of beam energy. The slope temperature and the quadrupole fluctuation temperature give high values. The quantum slope temperature and the quantum quadrupole fluctuation temperature are more close to the He and Li isotope temperatures.     

Collimated LaBr3 detector response function in radioactivity analysis of nuclear waste drums

The properties of a Lanthanum bromide （LaBr3） detector and its response functions were investigated via experiments and simulations in this paper. The LaBr3 detector had good relative energy resolution and higher efficiency than a high-purity germanium detector. Monte Carlo and other numerical methods were used to calculate the efficiencies of a LaBr3 detector with a square collimation window. A model of the numerical method was established based on a pure geometric model that was consistent with the experimental situation. The results showed that the detector response functions calculated by these methods were in great agreement with experimental results.     

On ring and bubble formations in heavy ion collisions

The work is devoted to the implementation of the hydrodynamic laws to the head-on heavy ion collisions within the energy range 50-100 MeV/A. The hydrodynamic mechanisms of the bubble and ring structures formation are investigated. It is shown that there is a possible hydrodynamic explanation of the different structures being formed in the case of soft （K=200 MeV） and stiff （K=400 MeV） equations of state. Within the suggested approach the final geometry of the system is defined in the initial stage of the collision and is very dependent on the sound velocity in the nuclear matter. The obtained results are in a good correspondence with the Boltzmann-like transport theory calculations and the experimental data for the selected energy range.     

Nuclear symmetry energy from QCD sum rules

We calculated the nucleon self-energies in iso-spin asymmetric nuclear matter and obtained the nuclear symmetry energy by taking difference of these of neutron and proton. We find that the scalar （vector） self-energy part gives a negative （positive） contribution to the nuclear symmetry energy, consistent with the result from relativistic mean-field theories. Also, we found exact four-quark operator product expansion for nucleon sum rule. Among them, twist-4 matrix elements which can be extracted from deep inelastic scattering experiment constitute an essential part in the origin of the nuclear symmetry energy from QCD. Our result also extends early success of QCD sum rule in the symmetric nuclear matter to the asymmetric nuclear matter.     

大亚湾核电站继电器机架支撑改造初步力学分析

针对大亚湾核电站继电器机架橡胶减震器因老化破裂而影响机架的抗震性能、日常运行和维修等问题而提出支撑改造方案,采用谱分析法对改造前后的各种支撑结构进行初步力学分析.比较了大亚湾继电器机架改造前后支撑的抗震性能,以及大亚湾和岭澳两种继电器机架支撑结构在同一地震载荷作用下的力学响应,为大亚湾核电站继电器机架支撑的加固改造提供参考.     

Development of Data Acquisition Card Driver for ICRH System on EAST

Presented in this paper is the development of the driver for the data acquisition card with a peripheral component interconnection （PCI） local bus on the ion cyclotron range of frequency heating （1CRH） system. The driver is mainly aimed at the embedded VxWorks system （real-time operating system） which is widely used in various fields of real-time systems. An efficient way is employed to develop this driver, which will advance the real-time control of the ICRH system on the experimental advanced superconductor tokamak （EAST）. The driver is designed using the TORNADO integrated development environment （IDE）, and implemented in C plus language. The details include the hardware configuration, analogue/digital （A/D） and digital/analogue （D/A） conversion, input and output （I/O） operation of the driver to support over five cards. The data acquisition card can be manipulated in a low-level program and meet the requirements of A/D conversion and D/A outputs.     

Role of Ion Beam Irradiation and Annealing Effect on the Deposition of AlON Nanolayers by Using Plasma Focus Device

AlON nanolayers are synthesized on Al substrate by the irradiation of energetic nitrogen ions using plasma focusing. Samples are exposed to multiple （5, 10, 15, 20 and 25） focus shots. Ion energy and ion number density range from 80 keV to 1.4 MeV and 5.6×10^19 m^- 3 to 1.3×10^19 m ^-3, respectively. Moreover, the effect of continuous annealing （473 K and 523 K） on an AlN surface layer synthesized with 25 focus shots is also examined. The main features of the X-ray diffraction （XRD） patterns with increasing focus shots are： （i） variation in the crystallinity of AlN along （111）, （200） and （311） planes, （ii） increasing average crystallite size of AlN （111） plane, and （iii） stress relaxation observed in AlN （111） and （200） planes. The crystallinity of AlN surface layer is comparatively better at 473 K annealing temperature. A broadened diffraction peak related to an aluminium oxide phase showing weak crystallinity is observed for 15 focus shots while non-bounded oxides are present in all other deposited layers. Raman and Fourier transform infrared spectroscopy （FTIR） analysis confirm the presence of AlN and Al203 for the surface layer annealed at 473 K temperature. Raman analysis shows that the overlapping of AlN and Al2Oa results in the development of residual stresses. Scanning electron microscope （SEM） results demonstrate that the formation of rounded grains （range from 20 nm to 200 nm） and variations in their microstructures features depend on the increasing number of focus shots. Decomposition of larger clusters into smaller ones is observed.     

Simultaneous Oxidization of NOx and SO2 by a New Non-thermal Plasma Reactor Enhanced by Catalyst and Additive

The non-thermal plasma as one of the most promising technologies for removing NOx and SO2 has attrm~ted much attention. In this study, a new plasma reactor combined with catalyst and additive was developed to effectively oxidize and remove NOx and SO2 in the flue gas. The experimental results showed that TiO2 could improve the oxidation efficiency of SO2 in the case of applying plasma while having a negative effect on the oxidation process of NO and NOx. With the addition of NH3, the oxidation rates of NOx, NO and SO2 were slightly increased. However, the effect of adding NH3 on NOx oxidation was negative when the temperature was above 200℃.     

Effect of Cold Plasma Treatment on Seed Germination and Growth of Wheat简

This study investigated the effect of cold helium plasma treatment on seed germina- tion, growth and yield of wheat. The effects of different power of cold plasma on the germination of treated wheat seeds were studied. We found that the treatment of 80 W could significantly improve seed germination potential （6.0%） and germination rate （6.7%） compared to the control group. Field experiments were carried out for wheat seeds treated with 80 W cold plasma. Com- pared with the control, plant height （20.3%）, root length （9.0%） and fresh weight （21.8%） were improved significantly at seedling stage. At booting stage, plant height, root length, fresh weight, stem diameter, leaf area and leaf thickness of the treated plant were respectively increased by 21.8%, 11.0%, 7.0%, 9.0%, 13.0% and 25.5%. At the same time, the chlorophyll content （9.8%）, nitrogen （10.0%） and moisture content （10.0%） were higher than those of the control, indicating that cold plasma treatment could promote the growth of wheat. The yield of treated wheat was 7.55 t-ha-1, 5.89% more than that of the control. Therefore, our results show that cold plasma has important application prospects for increasing wheat yield.     

Simulation of Electron-Beam Generating Plasma at Atmospheric Pressure

As electron-beam generating plasma is widely applied, the software tool EGS4 （Electron-Gamma Shower） was used to simulate the transmission and energy deposition of electron-beam in air. The simulation results indicated that the range of the electron-beam was inversely proportional to the gas pressure in a wide range of gas pressure, and the electron-beam of 200 keV could generate a plasma with a density 10^11 cm^-3 in air of latm. In addition, the energy distribution of the beam-electron and plasma density profile produced by the beam were achieved.     

Mechanical Properties of Thermoplastic Polyurethanes Laminated Glass Treated by Acid Etching Combined with Cold Plasma

To overcome the problem of interlaminar delamination of thermoplastic polyurethane laminated glass, silicate glass was etched with hydrofluoric acid and thermoplastic polyurethane was then treated with cold plasma. Compared with the untreated samples, the interlaminar shear strength of acid etching samples, cold plasma-treated samples and acid etching combined with cold plasma-treated samples increased by 97%, 84% and 341%, respectively. Acid etching combined with cold plasma-treated samples exhibited a higher flexural strength and strain as compared with the untreated samples. The impact energy of acid etching samples, cold plasmatreated samples and acid etching combined with cold plasma-treated samples increased by 8.7%, 8.1% and 11.6%, respectively, in comparison with the untreated samples. FT-IR analysis showed that a large number of -C-O, CO N and CO O C groups appeared on the surface of cold plasma-treated thermoplastic polyurethane, which resulted in the formation of hydrogen bonds. SEM results showed that some pittings formed on the surface of the silicate glass treated by acid etching, which resulted in the formation of a three-dimensional interface structure between tile silicate glass and polyurethane. Hydrogen bonds combined with the three-dimensional interface between silicate glass and polyurethanes co-improved the mechanical properties of thermoplastic polyurethanes laminated glass.     

Density and temperature of fermions and bosons from quantum fluctuations

A novel method to determine the density and temperature of a system constituted by fermions and/or bosons is proposed based on quantum fluctuations. For fermions system, the results in the limit where the reached temperature T is small and where there is no constraint for the reached temperature T compared to the Fermi energy ~f at a given density p are given, respectively. Quadrupole and multiplicity fluctuation relations are derived in terms of T/6f. We compared the two set results in the limit when Tis much smaller compared to Fermi energy Cf and they are consistent, as expected. The classical limit is also obtained for high temperatures and low densities. For bosons system, quadrupole and multiplicity fluctuations using Landau＇s theory of fluctuations near the critical point for a Bose-Einstein condensate （BEC） at a given density p are derived. As an example, we apply our approach to heavy ion collisions using the Constrained Molecular Dynamics model （CoMD） which includes the fermionic statistics. The multiplicity fluctuation quenching for fermions is found in the model and confirmed by experimental data. To reproduce the available experimental data better, we propose a modification of the collision term in the approach to include the possibility of ct-a collisions. The relevant Bose-Einstein factor in the collision term is properly taken into account. This approach increases the yields of bosons relative to fermions closer to data. Boson fluctuations become larger than one as expected.     

Reaction mechanisms in massive nuclei collisions and perspectives for synthesis of heavier superheavy elements

We discuss a hardship in synthesis of heaviest super heavy elements in massive nuclei reactions due to the hindrance to complete fusion of reacting nuclei caused on the onset of quasifission process which strongly competes with complete fusion and due to the strong increase of fission yields along the de-excitation cascade of the compound nucleus in comparison with the evaporation residue formation. The hindrance to formation of compound nucleus and evaporation residue is determined by the characteristic of the entrance channel.     

Second Discharge Characteristics of Aluminum Wire Electrical Explosion Under Various Argon Pressures

Electrical wire explosion is a promising method for the preparation of metal nanopowder, but the properties of metal nanopowder are affected by the second discharge process of electrical wire explosion. The second discharge characteristics of aluminum wire electrical ex- plosion under variant argon pressures were studied in a RLC discharge circuit. The results show that the curve of the second discharge voltages versus the pressure presents a U-shape. To clarify the roles of aluminum vapor and argon in the process of the second discharge, a spectrograph and a high speed framing camera were used to study the radiation spectrum and spatial distribution of the electrical explosion plasma. It is observed that argon participates in the second discharge process under low pressure. A discharge channel develops along the surface of the aluminum vapor. Under higher pressure, a second discharge takes place in the aluminum vapor and the discharge channel is inside the aluminum vapor.