Synthesis and characterization of polyhydroxylated polybutadiene binding 2,2′‐thiobis(4‐methyl‐6‐tert‐butylphenol) with isophorone diisocyanate

A macromolecular hindered phenol antioxidant, polyhydroxylated polybutadiene containing thioether binding 2,2′‐thiobis(4‐methyl‐6‐tert‐butylphenol) (PHPBT‐b‐TPH), was synthesized via a two‐step nucleophilic addition reaction using isophorone diisocyanate (IPDI) as linkage. First, the ? OH groups of PHPBT reacted with secondary ? NCO groups of IPDI to form the adduct PHPBT‐NCO, then the PHPBT‐b‐TPH was obtained by one phenolic ? OH of 2,2′‐thiobis(4‐methyl‐6‐tert‐butylphenol) (TPH) reacting with the PHPBT‐NCO. The PHPBT‐b‐TPH was characterized by Fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance (¹H‐NMR), ¹³C‐NMR, and thermogravimetric analysis, and its antioxidant activity in natural rubber was studied by an accelerated aging test. Influences of reaction conditions on the two nucleophilic reactions between ? OH group and ? NCO group were investigated. In addition, catalytic mechanism for the reaction between PHPBT‐NCO and TPH was discussed. The results showed that the adduct PHPBT‐NCO could be obtained by using dibutyltin dilaurate (DBTDL) as catalyst, and the suitable temperature and DBTDL amount were 35°C and 3 wt %, respectively. However, triethylamine (TEA) was more efficient than DBTDL to catalyze the reaction between PHPBT‐NCO and TPH because of steric hindrance effect. In addition, it was found that the thermal stability and antioxidant activity of PHPBT‐b‐TPH were higher than those of the low molecular weight antioxidant TPH. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40942.     

The β‐δ‐Phase Transition and Thermal Expansion of Octahydro‐1,3,5,7‐Tetranitro‐1,3,5,7‐Tetrazocine

Phase behavior of octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine (HMX) is investigated by X‐ray powder diffraction (XRD). The XRD patterns at elevated temperature show that there is a co‐existing temperature range of β‐ and δ‐phase during the phase transition process. Additionally, mechanical forces can catalyze the conversion from δ‐ back to β‐phase. Based on the diffraction patterns of β‐ and δ‐phase at different temperatures, we calculate the coefficients of thermal expansion by Rietveld refinement. For β‐HMX, the linear coefficients of thermal expansion of a‐axis and b‐axis are about 1.37×10⁻⁵ and 1.25×10⁻⁴ °C⁻¹. A slight decrease in c‐axis with temperature is also observed, and the value is about −0.63×10⁻⁵ °C⁻¹. The volume coefficient of thermal expansion is about 1.60×10⁻⁴ °C⁻¹, with a 2.2% change from 30 to 170 °C. For δ‐HMX, the linear coefficients of thermal expansion of a‐axis and c‐axis are found to be 5.39×10⁻⁵ and 2.38×10⁻⁵ °C⁻¹, respectively. The volume coefficient of thermal expansion is about 1.33×10⁻⁴ °C⁻¹, with a 2.6% change from 30 to 230 °C. The results indicate that β‐HMX has a similar volume coefficient of thermal expansion compared with δ‐HMX, and there is about 10.5% expansion from β‐HMX at 30 °C to δ‐HMX at 230 °C, of which about 7% may be attributed to the reconstructive transition.     

Thermal degradation kinetics of thermotropic poly(p‐oxybenzoate‐co‐p,p′‐biphenylene terephthalate) fiber

An advanced heat‐resistant fiber (trade name Ekonol) spun from a nematic liquid crystalline melt of thermotropic wholly aromatic poly(p‐oxybenzoate‐p,p′‐biphenylene terephthalate) has been subjected to a dynamic thermogravimetry in nitrogen and air. The thermostability of the Ekonol fiber has been studied in detail. The thermal degradation kinetics have been analyzed using six calculating methods including five single heating rate methods and one multiple heating rate method. The multiple heating‐rate method gives activation energy (E), order (n), frequency factor (Z) for the thermal degradation of 314 kJ mol⁻¹, 4.1, 7.02 × 10²⁰ min⁻¹ in nitrogen, and 290 kJ mol⁻¹, 3.0, 1.29 × 10¹⁹ min⁻¹ in air, respectively. According to the five single heating rate methods, the average E, n, and Z values for the degradation were 178 kJ mol⁻¹, 2.1, and 1.25 × 10¹⁰ min⁻¹ in nitrogen and 138 kJ mol⁻¹, 1.0, and 6.04 × 10⁷ min⁻¹ in air, respectively. The three kinetic parameters are higher in nitrogen than in air from any of the calculating techniques used. The thermostability of the Ekonol fiber is substantially higher in nitrogen than in air, and the decomposition rate in air is higher because oxidation process is occurring and accelerates thermal degradation. The isothermal weight‐loss results predicted based on the nonisothermal kinetic data are in good agreement with those observed experimentally in the literature. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1923–1931, 1999     

Characterization and determination of swelling and diffusion characteristics of poly(n‐vinyl‐2‐pyrrolidone) hydrogels in water

Hydrogels in the form of rods with varying crosslink densities and three‐dimensional network structures were prepared from Poly(N‐vinyl‐2‐pyrrolidone) (PVP)/water and PVP/water/persulfate systems by irradiation with γ rays at ambient temperature. Average molecular weights between crosslinks, percent swelling, swelling equilibrium values, diffusion/swelling characteristics (i.e., the structure of network constant, the type of diffusion, the initial swelling rate, swelling rate constant), and equilibrium water content were evaluated for both hydrogel systems. Water diffusion to the hydrogel is a non‐Fickian type diffusion and diffusion coefficients vary from 6.56 × 10⁻⁷ to 2.51 × 10⁻⁷cm²min⁻¹ for PVP and 6.09 × 10⁻⁷ to 2.14 × 10⁻⁷ cm²min⁻¹ for PVP/persulfate hydrogel systems. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 994–1000, 2000     

Chemical Transformation of Octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine (HMX) Induced by Low Energy Electron Beam Irradiation

The effects of 8.0×10⁻¹⁷ J (500 eV) and 3.2×10⁻¹⁹ J (2 eV) electrons on chemical structure of octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine (HMX) were studied in situ, under ultra‐high vacuum conditions using a combination of X‐ray photoelectron spectroscopy (XPS) and quadrupole mass spectrometry. XPS data indicated that electrons impact by 8.0×10⁻¹⁷ J for 30 s caused a decrease in nitro group concentration, and a little shift in the binding energy of the nitrogen 1s peak. Such a phenomenon was found at very low kinetic energy (3.2×10⁻¹⁹ J) with time evolution. Quadrupole mass spectrometry detected gas desorption after electron irradiation included H₂O and H₂ mostly. Microscopy‐IR spectroscopic investigations also proved that the intensity of nitro groups of HMX after irradiation decreased compared with those of the pristine HMX. We attributed the structure changes obtained by XPS and IR spectroscopy result in a chemical transformation, which was associated with low‐energy dissociative electron attachment (DEA) of surface contaminants followed by deoxidization reactions to form the product molecules.     

Investigation on the Thermal Expansion and Theoretical Density of 1,3,5‐Trinitro‐1,3,5‐Triazacyclohexane

The CTE and the theoretical density are important properties for energetic materials. To obtain the CTE and the theoretical density of 1,3,5‐trinitro‐1,3,5‐triazacyclohexane (RDX), XRD, and Rietveld refinement are employed to estimate the dimensional changes, within the temperature range from 30 to 170 °C. The CTE of a, b, c axis and volume are obtained as 3.07×10⁻⁵ K⁻¹, 8.28×10⁻⁵ K⁻¹, 9.19×10⁻⁵ K⁻¹, and 20.7×10⁻⁵ K⁻¹, respectively. Calculated from the refined cell parameters, the theoretical density at the given temperature can be obtained. The theoretical density at 20 °C (1.7994 g cm⁻³) is in close match with the RDX single‐crystal density (1.7990 g cm⁻³) measured by density gradient method. It is suggested that the CTE measured by XRD could perfectly meet with the thermal expansion of RDX.     

Water‐sorption and metal‐uptake behavior of pH‐responsive poly (N‐acryloyl‐N′‐methylpiperazine) gels

Hydrogels based on N‐acryloyl‐N′‐methylpiperazine (AcrNMP) swelled extensively in solutions of low pH due to the protonation of the tertiary amine. The water transport in the gels under an acidic condition was non‐Fickian and nearly Fickian in neutral pH with the collective diffusion coefficients determined as 2.08 × 10⁻⁷ and 5.00 × 10⁻⁷ cm⁻² s⁻¹, respectively. These gels demonstrated good metal‐uptake behavior with various divalent metal ions, in particular, copper and nickel, with the uptake capacity increased with increasing pH. The swelling ratio of the gel in the presence of metal ions decreased with increasing metal ion uptake. The results suggest that high metal ion uptake can lead to physical crosslinking arising from the interchain metal complex formation. The metal‐loaded gels could be stripped easily with 1M H₂SO₄ without any loss in their uptake capacity. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 268–273, 2001     

Preparation and coordination behavior of cellulose beads derivative modified by 1,5‐diaminoethyl‐3‐hydroxy‐1,5‐diazacycloheptane

Cellulose derivative (MPCN) modified by 1,5‐diaminoethyl‐3‐hydroxy‐1,5‐diazacycloheptane (DADN) was prepared and characterized by scanning electron microscopy and elemental, and infrared analysis. MPCN and its Cu²⁺, Pb²⁺ complexes were characterized by thermogravimetric and differential thermal analysis. The coordination adsorption behavior of MPCN with divalent copper and lead ions was determined. The effects of temperature, initial pH value, and the concentration of MPCN ligand to the equilibrium adsorption were discussed. The optimum pH range of the coordination adsorption of MPCN with Cu²⁺ and Pb²⁺ is 5–6. The rate constants of the coordination reaction were found. At 323 K, the rate constant is 1.0 × 10⁻³ and 7.0 × 10⁻⁴ s⁻¹ for Cu²⁺ and Pb²⁺, respectively. The thermodynamic parameters of the coordination reaction were obtained based on the experiment data of the adsorption isotherms. The coordination reaction was performed spontaneously from the data of ΔG, as follows: −21.65 and −19.41 kJ/mol and ΔS, 87.06 and 67.92 J/mol K for Cu²⁺ and Pb²⁺, respectively. The coordination ratio of DADN coordination group immobilized on cellulose beads with either metal ion is about 1 : 2 from the plot of the relation of lgD versus lgL and the capacity of saturation adsorption. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1278–1285, 1999     

Advanced oxidation with ozone of 1,3,6‐naphthalenetrisulfonic acid in aqueous solution

The kinetics of oxidation with ozone of 1,3,6‐naphthalenetrisulfonic acid was analysed by studying the influence of different experimental parameters such as the concentration of tert‐butyl alcohol (2‐methyl‐2‐propanol), initial concentration of the acid, pH, and temperature. The rate constant of the direct reaction at 25 °C was calculated (k_D = 6.72 M ^?1s^?1). The constant of the free radical reaction was determined with the competitive kinetics method, using sodium 4‐chlorobenzoate as reference compound, obtaining a value of k_OH = 3.7 × 10⁹ M ^?1s^?1. It was demonstrated that even at very acid pH values, 80% of the 1,3,6‐naphthalenetrisulfonic acid was degraded by free radical reactions, so that the ozonation of this acid may be considered an advanced oxidation process. © 2002 Society of Chemical Industry     

Poly‐α,β‐(3‐hydroxypropyl)‐DL‐aspartamide: A new drug carrier

Poly‐α,β‐(3‐hydroxypropyl)‐DL ‐aspartamide (PHPA) was synthesized by the ring‐open reaction of polysuccinimide (PSI) and 3‐hydroxypropylamine. The polymer was characterized by ¹H‐NMR, ¹³C‐NMR, FTIR, and GPC. Mark–Houwink coefficients were obtained from viscometry and GPC measurements, K = 5.53 × 10⁻³ and α = 0.78 in water. The acute toxicity of PHPA was examined and it revealed no death in ICR mice up to the dose treated of 15.3 kg/kg, and hematological parameters showed no significant difference between treated and control animals. The potential use of PHPA as a drug carrier was also investigated. In a typical case, a contraceptive drug, norethindrone (NET), was bonded to PHPA, and the drug sustained released as long as 120 days an in vitro test. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2411–2417, 2000     

Organosolv delignification of white‐ and brown‐rotted Eucalyptus grandis hardwood

Sound (undecayed control) and fungally‐pretreated wood samples were submitted to organosolv delignification. The cooking liquor used was methanol/water (78:22 v/v) containing CaCl₂ and MgSO₄ each at a concentration of 25 mmol dm⁻³. The cooking process was performed at 180 °C for reaction times varying from 5 to 100 min. Despite some differences in the lignin removal pattern, pseudo‐first order kinetic models permitted a prediction of delignification rate constants for all experiments. All biodegraded samples provided higher delignification rate constants than the undecayed control (2.0 × 10⁻²min⁻¹ for the undecayed control and, for example, 14.2 × 10⁻²min⁻¹ for the sample decayed by Trametes versicolor for 2.5 months). Biodegraded samples also presented significantly increased xylan removal rates. The type of biodegradation affected the behavior of wood samples under organosolv pulping. The highest delignification and xylan removal rate constants were observed in the sample decayed by T versicolor for 2.5 months (17% weight loss). However, high delignification and xylan removal rate constants were also observed in the sample decayed by Punctularia artropurpurascens for only 0.5 months (1.2% weight loss). Data obtained from a single fungal species pretreatment or data from all fungal pretreatments indicated that there is no clear correlation between the delignification constants and the wood weight or component losses. This lack of correlation suggested that the structure of residual polymers in decayed wood affects the delignification process in the organosolv pulping more than the removal extent of each individual component. © 2000 Society of Chemical Industry     

Structural and Preliminary Explosive Property Characterizations of New 3,4,5‐Triamino‐1,2,4‐triazolium (Guanazinium) Salts

Two new highly stable energetic salts were synthesized in reasonable yield by using the high nitrogen‐content heterocycle 3,4,5‐triamino‐1,2,4‐triazole and resulting in its picrate and azotetrazolate salts. 3,4,5‐Triamino‐1,2,4‐triazolium picrate (1) and bis(3,4,5‐triamino‐1,2,4‐triazolium) 5,5′‐azotetrazolate (2) were characterized analytically and spectroscopically. X‐ray diffraction studies revealed that protonation takes place on the nitrogen N1 (crystallographically labelled as N2). The sensitivity of the compounds to shock and friction was also determined by standard BAM tests revealing a low sensitivity for both. B3LYP/6–31G(d, p) density functional (DFT) calculations were carried out to determine the enthalpy of combustion (Δ_cH (1) =−3737.8 kJ mol⁻¹, Δ_cH (2) =−4577.8 kJ mol⁻¹) and the standard enthalpy of formation (Δ_fH° (1) =−498.3 kJ mol⁻¹, (Δ_fH° (2) =+524.2 kJ mol⁻¹). The detonation pressures (P (1) =189×10⁸ Pa, P (2) =199×10⁸ Pa) and detonation velocities (D (1) =7015 m s⁻¹, D (2) =7683 m s⁻¹) were calculated using the program EXPLO5.     

Homopolymerization of 4‐propionoxybenzoic acid: A kinetic study

A kinetic study of the synthesis of poly(4‐oxybenzoate) by melt‐step growth polymerization using para‐propionoxybenzoic acid is reported. The polycondensations obey second‐order kinetics, irrespective of whether the reaction was catalyzed or uncatalyzed. Breaks are observed in the kinetic plots, suggesting the presence of different kinetic regimes during the course of the reaction. An elaborate kinetic model that presupposes precipitation of oligomers predicts two‐stage kinetics as well as breaks in the rate plots and fits experimental data well throughout the course of the reaction and the performance of two transesterification catalysts are estimated. No isokinetic temperature is displayed for the transesterification reaction. Activation energy values for catalyzed reactions are found to be higher than the uncatalyzed reaction, indicating that entropy factors drive the reaction to completion. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 467–476, 1999     

Radiation‐induced graft copolymerization of 2‐vinylpyridine and styrene onto isotactic polypropylene fiber

Isotactic polypropylene fiber (IPP) was graft‐copolymerized using 2‐vinyl pyridine (2‐VP) and styrene (sty) as the monomers by the mutual irradiation method in air. The percentage of grafting was determined as a function of various reaction parameters and it was found that the maximum grafting of 2‐VP (114%) and sty (76%) was obtained at an optimum dose of 1.08 × 10⁴ and 0.64 × 10⁴ Gy using 1.8 × 10⁻² mol of 2‐VP and 4.3 × 10⁻² mol of sty, respectively. The graft copolymers were characterized by differential scanning calorimetric analysis and isolation of the grafted chains from the grafted iPP samples. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2959–2969, 1999     

Synthesis and Electrochemical Properties of BaFe1−xCuxO3−δ Perovskite Oxide for IT‐SOFC Cathode

A series of iron‐based perovskite oxides BaFe_1−xCu_xO_3−δ (x = 0.10, 0.15, 0.20 and 0.25, abbreviated as BFC‐10, BFC‐15, BFC‐20 and BFC‐25, respectively) as cathode materials have been prepared via a combined EDTA‐citrate complexing sol‐gel method. The effects of Cu contents on the crystal structure, chemical stability, electrical conductivity, thermal expansion coefficient (TEC) and electrochemical properties of BFC‐x materials have been studied. All the BFC‐x samples exhibit the cubic phase with a space group Pm3m (221). The electrical conductivity decreases with increasing Cu content. The maximum electrical conductivity is 60.9 ± 0.9 S cm⁻¹ for BFC‐20 at 600 °C. Substitution of Fe by Cu increases the thermal expansion coefficient. The average TEC increases from 20.6 × 10⁻⁶ K⁻¹ for BFC‐10 to 23.7 × 10⁻⁶ K⁻¹ for BFC‐25 at the temperature range of 30–850 °C. Among the samples, BFC‐20 shows the best electrochemical performance. The area specific resistance (ASR) of BFC‐20 on SDC electrolyte is 0.014 Ω cm² at 800 °C. The single fuel cell with the configguration of BFC‐20/SDC/NiO‐SDC delivers the highest power density of 0.57 W cm⁻² at 800 °C. The favorable electrochemical activities can be attributed to the cubic lattice structure and the high oxygen vacancy concentration caused by Cu doping.     

Semiconductive poly[N1,N4‐bis(thiophen‐2‐ylmethylene)benzene‐1,4‐diamine]‐nickel oxide nanocomposite based ethanol sensor

This study aims to use the conductivity of a synthetic polymer as the sensing probe for ethanol. In order to enhance the sensitivity of the sensor, a composite of the polymer and nickel oxide (NiO) nanoparticles was formed as it improved the conductivity. This composite exhibited 100 times more conductivity than the neat polymer. The semiconductive nanocomposite of poly [N¹,N⁴‐bis(thiophen‐2‐ylmethylene)benzene‐1,4‐diamine]‐nickel oxide (PBTMBDA‐NiO) was prepared by in situ chemical oxidative polymerization. The monomer was N¹,N⁴‐bis(thiophen‐2‐ylmethylene)benzene‐1,4‐diamine (BTMBDA). The monomer (BTMBDA), polymer (PBTMBDA), and NiO nanoparticles used in this study were synthesized. The monomer was prepared by refluxing together 2‐thiophene carboxaldehyde, benzene‐1,4‐diamine, and few drops of glacial acetic acid in ethanol medium for 3 h. The polymer, PBTMBDA, was formed by the chemical oxidative polymerization of BTMBDA in chloroform by FeCl₃. NiO nanoparticles were prepared by slow addition of aqueous ammonia to anhydrous nickel chloride at room temperature (28 ± 2 °C), and at a pH of 8 under constant stirring condition. The composite was formed by in situ chemical oxidative polymerization of BTMBDA in chloroform by FeCl₃ in the presence of the dispersed NiO nanoparticles. The molecular structure of BTMBDA and PBTMBDA were confirmed by nuclear magnetic resonance (NMR) (¹H, ¹³C, and Dept‐90°), Fourier transform infrared spectroscopy, and ultraviolet (UV)–visible spectroscopy. The PBTMBDA and PBTMBDA‐NiO nanocomposite were characterized by X‐ray diffraction, thermogravimetric analysis, field emission scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy analysis. The results of characterization studies indicate the strong interaction between PBTMBDA and NiO in the nanocomposite. The broadness of ¹H NMR peaks in PBTMBDA was due to the increased number of monomer units. The disappearance of the peak of α‐hydrogens on thiophene confirms the polymerization involving the fifth position of thiophene part of BTMBDA. The Fourier transform infrared spectroscopy spectra revealed that position of the characteristic peaks of the functional groups in the monomer shifted toward lower wave numbers in PBTMBDA and PBTMBDA‐NiO nanocomposite. This shifting confirms the presence of extended conjugation along the polymer backbone. Electronic spectra of these compounds showed three absorption bands corresponding to π→π*, n→π* and n→π* transitions of π electron of carbon, lone pair electrons of S, and lone pair electrons of N (imine) groups, respectively. From the Tafel plot, the exchange current density evaluated for the BTMBDA and PBTMBDA are 0.2815 × 10⁻⁸ and 1.1508 × 10⁻⁸ A cm⁻², respectively. PBTMBDA is evaluated to be a better electrode material than the BTMBDA. The X‐ray diffraction plots showed that the characteristic peak of NiO in PBTMBDA‐NiO nanocomposite suggested successful incorporation of NiO in PBTMBDA‐NiO nanocomposite. The thermogravimetric analysis revealed the improved thermal stability of the composite. Field emission scanning electron microscopy and energy‐dispersive X‐ray spectroscopy analysis confirmed the presence of the NiO in the composite. Incorporation of nickel oxide nanoparticles improved the electrical conductivity and stability of PBTMBDA. The conductivity of the polymer was found to be of the order of 10⁻⁵ S cm⁻¹ while that of the composite was of the order of 10⁻³ S cm⁻¹. The nanocomposite was found to be thermally more stable than PBTMBDA and exhibited better direct‐current electrical conductivity and isothermal stability than the PBTMBDA as revealed by the four‐probe study. The electrical conductivity as inferred from the four‐probe method was used as the parameter to study the isothermal stability of the composite. The PBTMBDA‐NiO nanocomposite based vapor sensor was constructed for the sensing of ethanol vapor in commercial ethanol and real samples (alcoholic drinks: Beer, Wine, Brandy, Vodka, Whisky, and Rum) It was observed that on exposure to ethanol vapor at ambient temperature, the electrical resistivity of the nanocomposite increased indicating suppression of charge carriers. The interaction of ethanol vapor with PBTMBDA in PBTMBDA‐NiO nanocomposite was confirmed by IR spectral technique. The change in the structure of the PBTMBDA on interaction with ethanol was highlighted by the changes in the infrared spectrum. The conductivity of the polymer was explained using the structure‐activity relationship of the monomer evaluated using Gaussian 09 software. This study also analyzed the total electron density with electrostatic potential of the monomer and its correlation with chemical reactivity in order to explain the ethanol vapor sensing‐property of the nanocomposite. A new method of ethanol vapor sensing by a conducting polymer composite is hereby reported. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45918.     

Kinetics of polyurethane formation between glycidyl azide polymer and a triisocyanate

Kinetics of the polyurethane formation between glycidyl azide polymer (GAP) and a polyisocyanate, Desmodur N‐100, were studied in the bulk state by using quantitative FTIR spectroscopy. The reaction was followed by monitoring the change in intensity of the absorption band at 2270 cm^?1 for NCO stretching in the IR spectrum, and was shown to obey second‐order kinetics up to 50% conversion. The activation parameters were obtained from the evaluation of kinetic data at different temperatures in the range of 50–80°C. The enthalpy and entropy of activation were found to be ΔH^? = 44.1 ± 0.5 kJ · mol^?1 and ΔS^? = ?196 ± 2 J · mol^?1l · K^?1, respectively. Dibutyltin dilaurate (DBTDL) was used as the curing catalyst. The kinetic study of the polyurethane formation between GAP and Desmodur N‐100 showed that the reaction is enormously speeded up in the presence of the catalyst, and the reaction obeys second‐order kinetics, provided that the catalyst concentration is kept constant. An investigation on the rate of the catalysed reaction depending on the catalyst concentration provided the order of the reaction, with respect to the DBTDL catalyst concentration, and the rate constant for the catalytic pathway of the reaction. The rate constant for the catalytic pathway was established to be 4.37 at 60°C, while the uncatalyzed reaction has a rate constant of 3.88 × 10^?6 L · mol^?1 · s^?1 at the same temperature. A rate enhancement factor of 23 was achieved by using 50 ppm catalyst. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 918–923, 2001     

Inactivation of microorganisms in a flow‐through photoreactor with an immobilized TiO2 layer

A laboratory flow‐through photoreactor with an immobilized layer of TiO₂ (total volume of the liquid 5000 cm ³, photoactive area 60 cm long and 30 cm wide; irradiation source UV lamps Eversun, Osram, light intensity from 0.9 to 6.2×10⁻⁹ Einstein cm⁻² s ⁻¹) was tested for the inactivation of Escherichia coli (strain DH5α) and bacteriophage λNM1149. The kinetics of the deactivation were approximately first order and the initial reaction rate depended on the light intensity. At maximum intensity, the rate constants of the bacteria and viruses inactivation were 2.3×10⁻⁴ and 7.2×10⁻⁴ s⁻¹, respectively. Bacterial inactivation was also accomplished with solar excitation. © 1999 Society of Chemical Industry     

Performance of novel hyperbranched poly(aryl‐ether‐urea)s doped with N3‐dye in nanocrystalline DSSC

An amine‐terminated hyperbranched poly(aryl‐ether‐urea) (HBPEU) was prepared from an AB₂‐type blocked isocyanate monomer and then its end groups were modified into urea (M‐HBPEU) by reaction with phenyl isocyanate. Both of the polymers were doped with N3‐dye along with KI/I₂ to work as efficient polymer electrolytes in nanocrystalline dye sensitized solar cell. The increment in the conductivity of doped HBPEU and doped M‐HBPEU was very significant and reached its value at 8.2 × 10⁻³ and 4.1 × 10⁻² S/cm, respectively. The current–voltage (I–V) characteristics of these two doped polymers measured under simulated sunlight with AM 1.5 at 60 mW/cm² generate photocurrent of 2.5 and 3.6 mA/cm², together with a photo voltage of 690 and 750 mV, and fill factor of 0.55 and 0.61 yielding a overall energy conversion efficiency of 2.4% and 4.1%, respectively. These results suggest that M‐HBPEU show better cell performance and conductance properties than the HBPEU. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40408.     

β‐Galactosidase immobilization into poly(hydroxyethyl methacrylate) membrane and performance in a continuous system

The activity of β‐galactosidase immobilized into a poly(2‐hydroxyethyl methacrylate) (pHEMA) membrane increased from 1.5 to 10.8 U/g pHEMA upon increase in enzyme loading. The K_m values for the free and the entrapped enzyme were found to be 0.26 and 0.81 mM, respectively. The optimum reaction temperatures for the free and the entrapped β‐galactosidase were both found to be 50°C. Similarly, the optimum reaction pH was 7.5 for both the free and the entrapped enzyme. The immobilized β‐galactosidase was characterized in a continuous system during lactose hydrolysis and the operational inactivation rate constant (k_iop) of the entrapped enzyme was found to be 3.1 × 10⁻⁵ min⁻¹. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1367–1373, 1999