Surfactant–Solvent-Based Quaternary Component Emulsification Microextraction Followed by High-Performance Liquid Chromatography for the Simultaneous Analysis of Benzimidazole Anthelmintics in Milk Samples

A simple surfactant-solvent-based quaternary component emulsification microextraction (SSEME) method combined with high-performance liquid chromatography–photodiode array detection has been developed for the extraction, preconcentration, and determination of four benzimidazole anthelmintic (i.e., oxfendazole, mebendazole, albendazole, and fenbendazole) residues in milk samples. The quaternary component solvent of SSEME carried out in 10 mL aqueous solution were Triton X-114 (emulsifier or carrier), acetonitrile (disperser solvent), and 1-octanol (extraction solvent). The surfactant has an important role in the enhancement of the extraction efficiency of the high polar analytes. For milk sample analyses, linearity was obtained in the range of 10–200 μg/L with the determination coefficients (R ²) higher than 0.996. Preconcentration factor was obtained in the range of 21–38, corresponding to limits of detection in the range of 2.6–9.9 μg/L. Intra-day (n?=?6) and inter-day (n?=?6?×?3) precisions in the sample studied were obtained with relative standard deviation below 8.8 %. The recoveries for the spiked target anthelmintics at different concentrations (25, 50, 100, and 150 μg/L) were obtained in the range 80.1–114.1 %. The proposed SSEME method has been demonstrated that is simple, effective, and reliable for the analysis of analytes in the samples studied and can be used as an alternative green analytical technique for benzimidazole analysis.     

Determination of Hormones Residues in Milk by Gas Chromatography-Mass Spectrometry

The article presents the use of gas chromatography-mass spectrometry (GC-MS) technique in a method for the determination of 18 anabolic hormones from synthetic stilbenes, steroids and resorcylic acid lactones (RALs) groups in raw milk and milk powder. Sample preparation consisted of liquid-liquid extraction with diethyl ether and purification by solid phase extraction (SPE). Prior to instrumental analysis, the reaction of derivatisation with the heptafluorobutyric anhydride or N-methyl-N-trimethylsilyltrifluoroacetamide was performed. Method validation was carried out according to the required performance criteria of the Commission Decision 2002/657/EC. The apparent recovery of all analytes at 1 μg L^?1 (kg^?1) level was ranged between 70.4 and 119.4 % with the coefficients of variation values less than 30 %. The decision limits (CCα) and the detection capabilities (CCβ) were in the range of from 0.11 to 0.44 μg L^?1 (kg^?1) and from 0.19 to 0.75 μg L^?1 (kg^?1), respectively. The procedure has been accredited and successfully applied as a screening method for the presence of hormone residues in the study of commercial samples of milk.     

Extraction and Preconcentration of Some Triazole Pesticides in Grape Juice by Salting Out Homogeneous Liquid–Liquid Extraction in a Narrow-Bore Tube Prior to Their Determination by Gas Chromatography–Flame Ionization Detection

A fast and simple extraction and preconcentration method for some triazole pesticides has been developed using a homogeneous liquid–liquid extraction method performed in a narrow-bore tube. The extraction is based on phase separation of a water-miscible organic solvent from aqueous solution in the presence of a salting out agent. In this work, the homogeneous solution of water and acetonitrile (water-soluble extraction solvent) was broken by addition of 30 %, w/v, sodium chloride (salting out agent). After sonication, a small volume of acetonitrile was collected on top of the tube and the extracted analytes in the collected phase were determined by gas chromatography–flame ionization detection. The effect of various experimental parameters including kind and volume of the water-soluble organic solvent, amount of salt, length and diameter of tube, and pH of sample solution was investigated. Under the optimum conditions, calibration graphs were linear over the range of 3–5,000 μg L^?1. Relative standard deviations were less than 5.4 % for six repeated determinations (C?=?100 μg L^?1). Furthermore, the limits of detection (S/N?=?3) and quantification (S/N?=?10) were obtained in the ranges of 0.60–4.8 and 1.9–16 μg L^?1, respectively. This method is very simple and rapid, requiring less than 10 min for sample preparation. It has been successfully utilized for the analysis of triazole pesticides in the grape juice samples.     

Use of Multivariate Optimization to Develop Methods for Direct Copper and Lead Determination in Breast Milk by Graphite Furnace Atomic Absorption Spectrometry

A direct method for lead and copper determination in breast milk by graphite furnace atomic absorption spectrometry, using aqueous calibration, was proposed in this study. Samples were diluted with hydroximethylaminomethane 80 %?v/v, pH 8. The dilution determination for Pb and Cu was 1:1 and 1:9, respectively. Fractional factorial (2^4?1) and central composite designs were used to optimize experimental conditions (pyrolysis and atomization temperatures, pyrolysis time, and modifier) using 10 μL samples introduced into a graphite furnace. The methods allowed for copper and lead determination under optimized conditions with an aqueous calibration curve between 0 and 180 μg L^?1 for Cu and 0 and 48 μg L^?1 for Pb. The detection limits were 0.92 μg L^?1 and 6.4 μg L^?1 for Pb and Cu, respectively. Intra and inter-assay studies revealed coefficients of variation of 5.0 and 6.3 %, and 6.4 and 5.5 % for Pb and Cu, respectively. Recovery studies at three concentration levels (three consecutive days, n?=?7/day) presented results between 107 and 109 % for Pb and 102 and 103 % for Cu. Good accuracy was obtained for both metals through recoveries studies using certified reference material (infant formula NIST® 1846). The method determined lead and copper in six samples and the concentrations ranged from 2.90 to 27.9 μg L^?1 for Pb and 384 to 1,212 μg L^?1 for Cu. While copper is an essential element, lead has no nutritional function and is cumulative at low concentrations. Therefore, safe, efficient, and validated methods should be available to determine its concentration in breast milk.     

Simultaneous Detection of Azodicarbonamide and the Metabolic Product Semicarbazide in Flour by Capillary Electrophoresis

In the present work, capillary electrophoresis (CE) was used for the first time for the simultaneous analysis of azodicarbonamide (ADA) and semicarbazide (SEM), and the capillary electrophoresis separation conditions, extraction agents, and derivatization conditions were investigated. In 20 mmol L^?1 sodium tetraborate, 30 mmol L^?1 β-cyclodextrin (β-CD), 17 % isopropanol (v/v), and 25 mmol L^?1 sodium dodecyl sulfate (SDS) running buffer, ADA and SEM previously derivatized with 9-fluorenylmethyl chloroformate (FMOC) were separated in less than 25 min with good sensitivity. The linear ranges were 8.3?×?10^?4～6.6?×?10^?2 mmol L^?1 and 1.9?×?10^?3～3.4?×?10^?2 mmol L^?1, and detection limits (S/N?=?10) were 0.5 and 0.15 mg kg^?1 for ADA and SEM, respectively. The proposed method was successfully applied for the simultaneous analysis of ADA and SEM in five flour samples with satisfactory recovery data from 88.0 to 93.0 % for ADA and 98.0 to 106.0 % for SEM, indicating the valuable potential application of this method for food analysis.     

Simultaneous Determination of Aflatoxin B1, Bisphenol A,and 4-Nonylphenol in Peanut Oils by Liquid-Liquid Extraction Combined with Solid-Phase Extraction and Ultra-High Performance Liquid Chromatography-Tandem Mass Spectrometry

An analytical method based on liquid-liquid extraction combined with solid-phase extraction and isotope dilution-ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) was well developed for simultaneous determination of aflatoxin B1 (AFB1), bisphenol A (BPA), and 4-nonylphenol (4-NP) in peanut oil. After adding isotope internal standards, the samples were firstly diluted by normal hexane and then extracted by acetonitrile and Carb/PSA solid-phase extraction cartridge in sequence to obtain the extracted solution. All the extracted solution was merged and was subsequently dried to near dryness by a mild nitrogen stream. Three target analytes were separated on a Phenomenex Luna C18 chromatographic column, quantified by an internal standard method and detected by ESI positive (ESI⁺) and negative (ESI^?) subsection acquisition modes under multi-reaction monitoring (MRM) conditions. Results demonstrated that the three target analytes exhibited excellent linearity in their corresponding concentration ranges of 0.1–100.0 μg/L with correlation coefficients all greater than 0.998. The corresponding method limits of quantitation (MLOQ, S/N?=?10) of AFB1, BPA, and 4-NP were 0.2, 1.0, and 2.0 μg/kg, respectively. Moreover, the mean recoveries for negative samples spiked at three concentration levels were calculated between 87.7 and 105.1% with relative standard deviation (RSD, n?=?6) ranging from 2.2 to 7.9% and the interday precision (n?=?5) ranging from 5.0 to 8.7%. Finally, the method was successfully applied to analyze 52 peanut oil samples, and AFB1 and 4-NP were detected in 43 samples with the concentrations in the ranges of 0.5–69.4 and 9.3–77.8 μg/kg, respectively. None of BPA was detected in any samples.     

Hollow Fiber Liquid Phase Microextraction Method Combined with High-Performance Liquid Chromatography for Simultaneous Separation and Determination of Ultra-Trace Amounts of Naproxen and Nabumetone in Cow Milk,Water, and Biological Samples

A simple and highly sensitive method based on hollow fiber liquid phase microextraction combined with high-performance liquid chromatography and fluorescence detection has been developed for simultaneous separation, preconcentration, and determination of naproxen and nabumetone from water, wastewater, milk, and biological samples. Parameters affecting the microextraction efficiency were evaluated and optimized. Under optimum conditions (extractant (14 μL of 1-undecanol), sample pH (3.0), extraction time (20 min), stirring rate (600 rpm), temperature (45 °C), potassium chloride concentration (4.0 %) and sample volume (9 mL)), the limits of detection based on (S/N?=?3) were 1.3 ng L^?1 for naproxen and 2.9 ng L^?1 for nabumetone. The intra- and inter-assay relative standard deviations for naproxen and nabumetone were in the ranges of 3.2–6.1 % and 6.5–9.5 %, respectively. The calibration curves were linear in concentration ranges of 4.0–300.0 ng L^?1 and 9.0–300.0 ng L^?1 for naproxen and nabumetone, respectively, with good coefficient of determination (r ²?>?0.999). The method was successfully applied to the determination of naproxen and nabumetone in cow milk, water, wastewater, human plasma, and urine samples.     

Simultaneous Determination of Cyadox and Its Metabolites in Chicken Tissues by LC-MS/MS

A specific and sensitive LC-MS/MS method was firstly established for the simultaneous extraction and determination of cyadox and its three main metabolites—1,4-bisdesoxycyadox, 4-desoxycyadox, and quinoxaline-2-carboxylic acid—in chicken muscle, liver, kidney, and fat tissues. Samples were subjected to extraction using ethyl acetate and followed by acetonitrile–chloroform (1:4, v/v) and further purified by Oasis mixed mode anion exchange SPE cartridge. Analysis was performed on a C₁₈ column by detection with MS in multiple-reaction monitoring mode. A gradient elution program with 0.1 % formic acid solution, acetonitrile, and 1 % formic acid (adjusted to pH 8 with ammonia) was performed at a flow rate of 0.2 mL min^?1. The correlation coefficients (r) for each calibration curve are higher than 0.99 within the experimental concentration range. The recoveries of the four target analytes at three spiking levels of 2.5, 25 and 250 μg kg^?1 were between 74.5 and 93.8 %, with relative standard deviations less than 12 %. The decision limits (CCαs) of the four analytes in chicken edible tissues ranged from 0.3 to 1.5 μg kg^?1, and the detection capabilities (CCβs) were below 2.3 μg kg^?1. The developed method demonstrated a satisfactory applicability in incurred chicken tissue samples.     

Optimization of Ultrasound-Assisted Extraction of Lycopene from Papaya Processing Waste by Response Surface Methodology

Lycopene possesses strong antioxidant ability, which may provide protection against cancer and other degenerative diseases. An ultrasound-assisted extraction method has been developed for the extraction of lycopene from papaya (Carica papaya L.) processing waste. Optimization conditions were firstly determined using single factor experiment, and then response surface methodology was used. Analysis showed that second-order polynomial models produced a satisfactory fitting of the experimental data with regard to lycopene (R ²?=?0.9147, P?<?0.001). The optimal conditions were 42.28 % ethanol in ethyl acetate as a solvent and extraction for 26.09 min at 50.12 °C. Under these conditions, the maximum yield of lycopene was 189.8?±?4.5 μg/g fresh weight (FW), which was higher than that obtained using the traditional extracting method (153.9?±?7.8 μg/g FW) and the Soxhlet extraction method (68.3?±?4.1 μg/g FW). The crude extract obtained could be used as either food additive or for further isolation and purification of lycopene. The results obtained are helpful for full utilization of papaya.     

Development of CO<Subscript>2</Subscript>-Mediated Switchable Hydrophilicity Solvent-Based Microextraction Combined with HPLC-UV for the Determination of Bisphenols in Foods and Drinks

In traditional dispersive liquid-liquid microextraction procedures, both extraction and dispersive solvents are required, and thus, it increases the consumption of organic solvent. Herein, we reported a CO₂-mediated switchable hydrophilicity solvent-based microextraction (SHS-BME) for the determination of bisphenol compounds (BPCs) in complex milk and drink samples. N,N-Dimethylcyclohexylamine was used as a switchable hydrophilicity solvent; it can switch reversibly between one form that is miscible with water and another that forms a biphasic mixture with water, and thus allow extraction of the analytes in a homogeneous phase without dispersive solvent. Several important parameters were screened and optimized by single factor experiments and central composite design as follows: 782 μL of switchable solvent, 375 μL of NaOH solvent, and 1.1:1 switchable solvent/water (v/v). Under the optimized SHS-BME conditions, the limit of detections (LODs) for BPCs in milk, orange juice, and energy drink samples were in the range of 0.27–0.40 μg L^?1 for BPE, 0.17–0.30 μg L^?1 for BPA, and 0.50–0.67 μg L^?1 for BPB, respectively, and the extraction recoveries for BPCs were in the range of 79.5–103.4% in milk, of 84.5–97.5% in orange juice, and of 91.9–101.2% in energy drinks. The precision of the method, based on relative standard deviations (RSDs), ranged from 1.7 to 4.8% and from 2.1 to 5.7% for intra-day and inter-day comparisons, respectively. In total, this SHS-BME method possesses many advantages, such as high extraction recovery and high detection sensitivity (low LODs and RSDs), no requirement of dispersive solvent, simple operational procedure, reducing the pretreatment time and workload, and so on. Therefore, it has a great potential application value for detection of trace BPCs in routine food tests.     

Determination of Quercetin, Gallic Acid, Resveratrol, Catechin and Malvidin in Brazilian Wines Elaborated in the Vale do São Francisco Using Liquid–Liquid Extraction Assisted by Ultrasound and GC-MS

In this work, a fast and simple methodology has been applied for the determination of gallic acid, resveratrol, catechin and malvidin in Brazilian wines by gas chromatography–mass spectrometry. The procedure included a stage of ultrasound-assisted liquid–liquid extraction and subsequent derivatization with N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) and GC-MS analysis. The limit of detection varied from 0.41 to 1.18 mg?L^?1 in all the analytes. The relative standard deviations calculated for 8.0 and 20 mg?L^?1 were 1.90 and 0.82 % for gallic acid, 3.08 and 1.22 % for catechin, 1.30 and 0.44 % for malvidin, 1.50 and 0.53 % for resveratrol, and 1.41 and 0.61 % for quercetin. The developed methodology was applied for the analysis of red wine samples collected in the São Francisco region, Bahia state, Brazil. Quercetin concentration varied from 2.4 to 3.0 mg?L^?1, gallic acid 21.4–56.3 mg?L^?1, resveratrol 1.5–5.9 mg?L^?1, malvidin 15.3–32.2 mg?L^?1, and catechin 11.71–18.2 mg?L^?1. The obtained concentrations are in agreement with those reported in the literature.     

A Rapid Quantification of β-Carotene in Fruits and Vegetables by Dispersive Liquid–Liquid Microextraction Coupled with UV–Vis Spectrophotometry: Optimized by Response Surface Methodology

A simple, fast, and efficient method consisted of optimized dispersive liquid–liquid microextraction (DLLME) followed by UV–vis spectrophotometry was developed for determination of β-carotene in fruits and vegetables. Chloroform and methanol were chosen as extraction and disperser solvents, respectively. The extraction process was optimized using a central composite design (CCD) with the optimum points of 115 μL for volume of extraction solvent and 6.5 % (w/v) for salt concentration. Under the optimal conditions, the relative standard deviation (RSD, C?=?500 μg L^?1, n?=?5), limit of detection (LOD), linear dynamic range (LDR), and coefficient of determination (R²) were 1.08 %, 2 μg L^?1, 50–1,500 μg L^?1, and 0.991, respectively. The present method consisted of a simple and fast sample preparation procedure without any antioxidant addition, saponification, and purification was used.     

Dual-Label Chemiluminescence Strategy for Multiplexed Immunoassay of 20 Fluoroquinolones, 15 β-Lactams, 15 Sulfonamides,and CAP in Milk

In this paper, a novel dual-label time-resolved chemiluminescent multiplexed immunoassay (DLTRC-MIA) based on the distinction of the kinetic characteristics of horseradish peroxidase (HRP) and alkaline phosphatase (ALP) with approximate estimation approach for simultaneous determination of 20 fluoroquinolones (FQs), 15 β-lactams, 15 sulfonamides (SAs), and chloramphenicol (CAP) in milk was developed. The strategy integrated a single-chain variable fragment–alkaline phosphatase fusion protein (scFv-ALP), a recombinant penicillin-binding protein (PBP) 2×*, a monoclonal antibody (MAb), and a polyclonal antibody (PAb) in one immunoassay and in a single well together to fulfill the simultaneous detection of 51 low-molecular weight contaminants (20 FQs, 15 β-lactams, 15 SAs, and CAP). The limits of detection for FQs, β-lactams, SAs, and CAP range from 0.29 μg L^?1 for ciprofloxacin (CIP) to 81.6 μg L^?1 for trovafloxacin (TRO), 0.27 μg L^?1 for ceftiofur (CEF) to 44.1 μg L^?1 for cephalexin (CEL), 0.089 μg L^?1 for sulfadimethoxine (SDM) to 2.7 μg L^?1 for sulfadiazine (SDZ), and 0.028 μg L^?1 for CAP, respectively. The results demonstrated that the detection limits of DLTRC-MIA meet the requirement of detection levels for 51 drug residues in milk, suitable for high-throughput screening of low-molecular weight contaminants.     

Rapid Screening and Determination of the Residues of Hormones and Sedatives in Milk Powder Using the UHPLC-MS/MS and SPE

A method based on the ultra-high-performance liquid chromatography tandem mass spectrometry for determination of the residues of sex hormones, glucocorticoids, and sedatives in milk powder was developed. The sample was extracted with the acetic acid-acetonitrile (1:99, v/v) twice, purified by the PRiME hydrophilic-lipophilic balance (HLB) cartridges and analyzed by the ultra-high-performance liquid chromatography-tandem mass spectrometry. The analytes were separated by the Waters Acquity UPLC? BEH C18 column (50 mm?×?2.1 mm, 1.7 μm) and determined using the electrospray ionization in the positive mode with the multiple reaction monitoring (MRM). The developed method was validated with the specificity, linearity and range, matrix effects, recovery, and precision. The results showed that the analytes were linear with the correlation of determinations (R²) higher than 0.991 in the corresponding ranges. The limits of detection (LODs) and limits of quantification (LOQs) were in the range of 0.1–1.1 μg kg^?1 and 0.3–3.8 μg kg^?1, respectively. The average recoveries of the analytes ranged from 78.5 to 107.0% with the relative standard deviations lower than 15%. The practical applicability was tested by analyzing real samples and the progesterone was observed in two samples.     

Analysis of Infant Formula for Steroid Hormones by Gas Chromatography–Tandem Mass Spectrometry Using Microwave-Assisted Extraction and Gel Permeation Chromatography Clean Up

A new method was developed for effective separation and simultaneous determination of estrogens, gestagens, and androgens, including estrone, 17β-estradiol, testosterone, progesterone, and estriol, in infant formula. The samples were enzymatically digested with β-glucuronidase/arylsulfatase prior to microwave-assisted extraction. After the extract was cleaned up by gel permeation chromatography the hormones were derivatived with 50 μL BSTFA containing 1 % TMCS. The derivatived hormones were measured with GC–MS/MS using electron impact ionization source in the positive multi-reaction monitoring mode. The calibration curves showed good linearity with correlation coefficient (r) of >0.999. The limit of quantification of five hormones ranged from 0.094 to 0.265 μg kg^?1, which is below the minimum required performance limits established by the European Community. The intra- and inter-day precision (as RSD) for six determinations of five analytes at 40 μg kg^?1 spiked level was in range of 3.4–5.4 % and 3.5–6.8 %, respectively. The recovery of five analytes was obtained to be 84.5–104 %, with relative standard deviations (RSD, n?=?6) of 1.7–5.5 %. This method has been successfully used for the qualitatively and quantitatively determination of estrone, 17β-estradiol, testosterone, progesterone, and estriol in infant formula.     

Application of a New Functionalized Nanoporous Silica for Simultaneous Trace Separation and Determination of Cd(II), Cu(II), Ni(II), and Pb(II) in Food and Agricultural Products

A novel sorbent for simultaneous separation of cadmium, copper, nickel, and lead was prepared by functionalizing SBA-15 nanoporous silica with dithizone. A solid-phase extraction method using the above sorbent was developed to separate and preconcentrate trace amounts of cadmium, copper, nickel, and lead ions from food and agricultural products by flame atomic absorption spectrometry measurements. The optimum experimental conditions such as pH; flow rates; type, concentration, and volume of the eluent; breakthrough volume; and effect of coexisting ions on the separation and determination of these heavy metals were evaluated. The extraction efficiencies for the mentioned heavy metals were greater than 97 %, and the limits of detection were 0.09, 0.16, 0.21, and 0.45 μg?L^?1 for cadmium, copper, nickel, and lead, respectively. The preconcentration factor for simultaneous analysis of the four heavy metals was found to be 100 approximately. The relative standard deviations of the method were <5 % for 10 separate column experiments for the determination of 5.0 μg of cadmium, copper, nickel, and lead ions. The adsorption capacity of the dithizone-SBA-15 was 189 mg?g^?1 for cadmium, 102 mg?g^?1 for copper, 91 mg?g^?1 for nickel, and 208 mg?g^?1 for lead.     

Determination of glyphosate,AMPA, and glufosinate in honey by online solid-phase extraction-liquid chromatography-tandem mass spectrometry

A simple method was developed for the simultaneous determination of glyphosate, its main degradation product (aminomethylphosphonic acid), and glufosinate in honey. Aqueous honey solutions were derivatised offline prior to direct analysis of the target analytes using online solid-phase extraction coupled to liquid chromatography-tandem mass spectrometry. Using the developed procedure, accuracies ranging from 95.2% to 105.3% were observed for all analytes at fortification levels of 5, 50, and 150 μg kg^?1 with intra-day precisions ranging from 1.6% to 7.2%. The limit of quantitation (LOQ) was 1 μg kg^?1 for each analyte. Two hundred honey samples were analysed for the three analytes with AMPA and glyphosate being most frequently detected (99.0% and 98.5% of samples tested, respectively). The concentrations of glyphosate were found to range from <1 to 49.8 μg kg^?1 while those of its degradation product ranged from <1 to 50.1 μg kg^?1. The ratio of glyphosate to AMPA was found to vary significantly amongst the samples where both analytes were present above the LOQ. Glufosinate was detected in 125 of 200 samples up to a maximum concentration of 33.0 μg kg^?1.     

Optimized Ultrasound-Assisted Temperature-Controlled Ionic Liquid Microextraction Coupled with FAAS for Determination of Tin in Canned Foods

A simple and rapid method based on ultrasound-assisted temperature-controlled ionic liquid microextraction combined with flame atomic absorption spectrometry (FAAS) has been developed for determination of tin. In this method, Sn(IV)-ammonium pyrrolidinedithiocarbamate (APDC) complex was extracted into a small volume of 1-hexyl-3-methylimidazolium hexafluorophosphate as ionic liquid and after phase separation, the enriched analyte in the final solution is determined by FAAS. Experimental design approaches were used to obtain the best conditions. The variables of interest were temperature, pH, buffer volume, extraction time, centrifugation time and volumes of ionic liquid, methanol, and APDC. The Plackett–Burman design was employed for screening to determine the variables significantly affecting the extraction efficiency. Then, the significant factors were optimized by using a central composite design. In the optimal conditions the calibration graph was linear in the range of 0.10–6.0 mg?L^?1 with a correlation coefficient of 0.997. The limit of detection and relative standard deviation (n?=?5 for determination of 1.0 mg?L^?1) were 42 μg?L^?1 and 1.6 %, respectively. The preconcentration factor was calculated to be 52.7. Finally, the method was successfully applied to the determination of tin in various canned products including peach, pineapple and aloe vera juice, canned pea, and canned cheese.     

Development of a Headspace-Solid Phase Microextraction-Gas Chromatography/Mass Spectrometry (HS-SPME-GC/MS) Method for the Determination of Benzene in Soft Drinks

A method based on headspace-solid phase microextraction and gas chromatography with mass spectrometry has been developed and validated for the determination of benzene in soft drinks. The extraction step was optimized using a rotatable central composite design including the following experimental variables: extraction temperature, extraction time, sample weight, and salt concentration. The optimized procedure, which was carried out at 30 °C during 30 min by using a 75 μm carboxen-polydimethylsiloxane fiber, showed good linearity within the concentration range 0–25 μg?kg^?1 (r ² ?>?0.999), mean recoveries from 97.5 to 103.1 %, and coefficients of variation from 1.5 to 13.4 % for repeatability and from 1.5 to 15.7 % for within-laboratory reproducibility. Limits of detection and quantification were calculated at 0.02 and 0.08 μg?kg^?1, respectively. The method was applied to determine the concentrations of benzene in 77 samples of beverages from the Brazilian market. Levels from <0.08 to 10.84 μg?kg^?1 were obtained, which are comparable to those verified in other countries. Most of the samples (72.2 %) contained benzene up to 1 μg?kg^?1.     

Rapid Determination of Trace Sulfonamides in Milk by Graphene Oxide-Based Magnetic Solid Phase Extraction Coupled with HPLC–MS/MS

A simple and rapid method based on magnetic solid-phase extraction (MSPE) combined with high-performance liquid chromatography coupled with triple quadrupole mass spectrometry (HPLC–MS/MS) was used for the determination of 15 sulfonamides from milk samples. The extraction and cleanup used a graphene oxide-based magnetic nanocomposite (Fe₃O₄@GO) as an adsorbent. Various experimental parameters that could affect the extraction efficiencies, such as the amount of Fe₃O₄@GO, the extraction time, the ionic strength of sample solution, and the type of eluent, were investigated. Under optimized experimental conditions, good linearity was observed in the range of 2.0 to 100.0 μg L^?1 for all of the analytes, with correlation coefficients (R²) ranging from 0.994 to 0.999. The limits of detection for the method ranged between 0.02 and 0.13 μg L^?1. Mean values of the relative standard deviation of intraday and interday precision ranging from 1.0 to 7.3 % and from 1.7 to 8.1 % were obtained, respectively. The average recoveries were between 73.4 and 97.4 % at three different spiked levels. It was confirmed that the Fe₃O₄@GO nanocomposite was an effective MSPE material for use in sulfonamide analyses in milk samples.