Porous carbon spheres as anode materials for sodium-ion batteries with high capacity and long cycling life

Porous carbon spheres (PCSs) with high surface area were fabricated by the reaction of D-Glucose monohydrate precursor with sodium molybdate dihydrate (Na₂MoO₄·2H₂O) via a facile hydrothermal method followed by carbonization and aqueous ammonia solution (NH₃·H₂O) treatment. The as-prepared PCSs exhibit a highly developed porous structure with a large specific surface area and show an excellent electrochemical performance as anode material of sodium-ion batteries (SIBs). A reversible capacity of 249.9 mA h g⁻¹ after 50 cycles at a current density of 50 mA g⁻¹ and a long cycling life at a high current density of 500 mA g⁻¹ are achieved. The excellent cycling performance and high capacity make the PCSs a promising candidate for long cycling SIBs.     

MoO3/reduced graphene oxide composites as anode material for sodium ion batteries

MoO₃/reduced graphene oxide (MoO₃/RGO) composites were successfully prepared via a facile one-step hydrothermal method, and evaluated as anode materials for sodium ion batteries (SIBs). The crystal structures, morphologies and electrochemical properties of the as-prepared samples were characterized by X-ray diffraction, field-emission scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge/discharge tests, respectively. The results show that the introduction of RGO can enhance the electrochemical performances of MoO₃/RGO composites. MoO₃/RGO composite with 6 wt% RGO delivers the highest reversible capacity of ~208 mA h g⁻¹ at 50 mA g⁻¹ after 50 cycles with good cycling stability and excellent rate performance for SIBs. The excellent sodium storage performance of MoO₃/RGO should be attributed to the synergistic effect between MoO₃ and RGO, which offers the increased electrical conductivity, the facilitated electron transfer ability and the buffering of volume expansion.     

Synthesis and electrochemical performance of Li4Ti5O12 submicrospheres coated with TiN as anode materials for lithium-ion battery

The TiN coated Li₄Ti₅O₁₂ (LTO) submicrospheres with high electrochemical performance as anode materials for lithium-ion battery were synthesized successfully by solvothermal method and subsequent nitridation process in the presence of ammonia. The XRD results revealed that the crystal structure of LTO did not change after thermal nitridation process. The submicrospheres morphology of LTO and TiN film on the surface of LTO submicrospheres were characterized by FESEM and HRTEM, respectively. XPS result confirmed that a small amount of Ti changed from Ti⁴⁺ to Ti³⁺ after nitridation process, which will increase the electronic conductivity of LTO. Electrochemical results showed that electrochemical performance of TiN coated LTO anode materials compared favorably with that of pure LTO. Also its rate capability and cycling performance were apparently superior to those of pure LTO. The reversible capacity of TiN-LTO is 105.2 mA h g⁻¹ at a current density of 10 C after 100 cycles and maintain 92.9% of its initial discharge capacity, while that of pure LTO is only 83.6 mA h g⁻¹ with a capacity retention of 90.3%. Even at 20 C, the discharge capacity of TiN coated LTO sample is 101.3 mA h g⁻¹, compared with 77.3 mA h g⁻¹ for pristine LTO in the potential range 1.0–2.5 V (vs. Li/Li⁺).     

Facile synthesis of lithium-vanadium-molybdenum oxide nanocomposite as high-performance anode material for lithium ion batteries

A lithium-vanadium-molybdenum-oxide composite has been prepared by a soft chemical route with mechanical activation assistance followed by low-temperature heat treatment in argon atmosphere. The X-ray diffraction reveals that the synthesized sample is made up of Li₃V(MoO₄)₃ and LiVOMoO₄ crystal phases. The SEM images show the fine particles ~300 nm in size. HRTEM image shows a clear crystal boundary between the two phases. The composite possesses good electrochemical performance as anode material. Particularly, it delivers an initial charge capacity of 927 mAh g⁻¹ at 50 mA g⁻¹ with a high initial coulombic efficiency of 81.2% and maintains 87.8% of its initial capacity after 50 cycles. Even if tested at 1000 mA g⁻¹, it can deliver a reversible capacity of 542 mA h g⁻¹.     

Evaluation of reduced graphene oxide-supported NiSb2O6 nanocomposites for reversible lithium storage

NiSb₂O₆ and reduced graphene oxide (NiSb₂O₆/rGO) nanocomposites are successfully fabricated by a solid-state method combined with a subsequent solvothermal treatment and further used as anode material of lithium-ion battery. The NiSb₂O₆/rGO nanocomposites exhibit a higher reversible capacity (of ca. 1240.5 mA h g⁻¹ at a current density of 50 mA g⁻¹), along with a good rate capability (395.2 mA h g⁻¹ at a current density of 1200 mA g⁻¹) and excellent capacity retention (684.5 mA h g⁻¹ after 150 cycles). These good performances could be attributed to the incorporated reduced grapheme oxide, which significantly improves the electronic conductivity of the NiSb₂O₆.     

Aqueous slurry of S-doped carbon nanotubes as conductive additive for lithium ion batteries

S-doped carbon nanotubes (SCNTs) obtained by a post treatment approach are used as conductive additive for LiFePO₄ (LFP) cathodes in Lithium ion batteries (LIBs). The SCNTs exhibit higher specific surface area, higher conductivity and better hydrophily as compared to the pristine CNTs because of S doping. Thus the SCNTs can be stably dispersed in water, forming an aqueous conductive slurry. The LFP cathode using the aqueous SCNTs slurry as conductive additive exhibits excellent electrochemical performances in terms of capacity (143 mA h g⁻¹ at 2 C), rate capability and cycling stability (99.6% of initial capacity after 200 cycles) due to the uniform dispersibility of SCNTs in the bulk of electrodes forming a continuous conductive network. The full cell configuration with graphite as anode, affords a high reversible capability (150 mA h g⁻¹ at 0.2 C), good cycling stability (capacity retention of 87.6% at 2 C), ultrahigh energy density of 163.7 W h kg⁻¹ and power density of 296.8 W kg⁻¹. Our results provide an easy approach to prepare high performance LIB cathodes using water as solvent, thus leading to lower cost and more secure for the electrode production.     

Bitter gourd-shaped Ni3V2O8 anode developed by a one-pot metal-organic framework-combustion technique for advanced Li-ion batteries

The present study reports on the one-pot synthesis of Ni₃V₂O₈ (NVO) electrodes by a simple metal organic framework-combustion (MOF-C) technique for anode applications in Li-ion batteries (LIBs). The particle morphology of the prepared NVO is observed to vary as irregular rods, porous bitter gourd and hybrid micro/nano particles depending on the concentration of the framework linker used during synthesis. In specific, the orthorhombic phase and the unique bitter gourd-type secondary structure comprised of agglomerated nanoparticles and porous morphologies is confirmed using powder X-ray diffraction, electron microscopies, X-ray photoelectron spectroscopy and N₂ adsorption–desorption measurements. When tested for lithium batteries as anode, the bitter gourd-type NVO electrode shows an initial discharge capacity of 1362 mA h g⁻¹ and a reversible capacity of 822 mA h g⁻¹ are sustained at a rate of 200 mA g⁻¹ after 100 cycles. Moreover, at 2000 mA g⁻¹, a reversible capacity of 724 mA h g⁻¹ is retained after 500 cycles. Interestingly, the porous bitter gourd-shaped NVO electrode registered significantly high rate performance and reversible specific capacities of 764, 531 and 313 mA h g⁻¹ at high rates of 1, 5 and 10 A g⁻¹, respectively.     

Porous nitrogen-doped carbon vegetable-sponges with enhanced lithium storage performance

Porous nitrogen-doped carbon vegetable-sponges (N-DCSs) have been fabricated by chemical treatment of the Cu@C precursors using HNO₃ for the first time. The obtained N-DCSs are porous three-dimensional (3D)-structure and similar to numerous agglomerated fluffy micro-vegetable-sponges. When the precursors are treated by H₂SO₄, carbon vegetable-sponges (CSs) without nitrogen doping are prepared. As anode materials in lithium ion batteries, the as-prepared N-DCSs show improved Li-storage capacity and cycling stability as compared with the pure CSs. They offer 870 mA h g⁻¹ at 0.5 A g⁻¹ after 300 cycles and high reversible capacity with 910 mA h g⁻¹ at 0.2 A g⁻¹ after cycled at different current densities, which are much higher than those of CSs. It is envisaged that the large surface area, unique 3D porous nanostructure and appropriate nitrogen doping are favorable for the superior electrochemical properties of N-DCSs.     

3D NiCo2S4 nanorod arrays as electrode materials for electrochemical energy storage application

It is essential to develop new electrode materials for electrochemical energy storage to meet the increasing energy demands, reduce environmental pollution and develop low-carbon economy. In this work, binder-free NiCo₂S₄ nanorod arrays (NCS NRAs) on nickel foam electrodes are prepared by an easy and low energy-consuming route. The electrodes exhibit superior electrochemical properties both for alkaline and Li-ion batteries. In 3 M KOH electrolyte, the NCS NRAs achieve a specific capacity of 240.5 mA h g⁻¹ at a current density of 0.2 A g⁻¹, and 105.7 mA h g⁻¹ after 1500 cycles at the current density of 5 A g⁻¹ with capacity retention of 87.3%. As the anode for LIBs, it shows a high initial capacity of 1760.7 mA h g⁻¹ at the current density of 100 mA g⁻¹, corresponding coulombic efficiency of 87.6%, and a rate capacity of 945 mA h g⁻¹ when the current density is improved 10 times. Hence, the NiCo₂S₄ nanorod arrays are promised as electrode materials with competitive performance.     

Nb2O5 nanospheres/surface-modified graphene composites as superior anode materials in lithium ion batteries

Uniform Nb₂O₅ nanospheres/surface-modified graphene (SMG) composites for anode materials in lithium ion batteries were synthesized by hydrothermal method. The microstructure and morphology of composites were investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscope techniques. The experimental results showed that Nb₂O₅ nanospheres were tightly and uniformly grown on the surface of SMG nanosheets. Nb₂O₅ nanospheres/SMG composites exhibited an impressive reversible capacity of 404.6 mA h g⁻¹ at the current density of 40 mA g⁻¹ after 100 cycles, and an excellent rate capacity of 345.5 mA h g⁻¹ at the current density of 400 mA g⁻¹.     

Effect of graphene nanosheets on electrochemical performance of Li4Ti5O12 in lithium-ion capacitors

In order to improve the electrochemical performance of lithium titanium oxide, Li₄Ti₅O₁₂ (LTO), for the use in the lithium-ion capacitors (LICs) application, LTO/graphene composites were synthesized through a solid state reaction. The composite exhibited an interwoven structure with LTO particles dispersed into graphene nanosheets network rather than an agglomerated state pristine LTO particles. It was found that there is an optimum percentage of graphene additives for the formation of pure LTO phase during the solid state synthesis of LTO/graphene composite. The effect of graphene nanosheets addition on electrochemical performance of LTO was investigated by a systemic characterization of galvanostatic cycling in lithium and lithium-ion cell configuration. The optimized composite exhibited a decreased polarization upon cycling and delivered a specific capacity of 173 mA h g⁻¹ at 0.1 C and a well maintained capacity of 65 mA h g⁻¹ even at 20 C. The energy density of 14 Wh kg⁻¹ at a power density of 2700 W kg⁻¹ was exhibited by a LIC full cell with a balanced mass ratio of anode to cathode along with a superior capacitance retention of 97% after 3000 cycles at a current density of 0.4 A g⁻¹. This boost in reversible capacity, rate capability and cycling performance was attributed to a synergistic effect of graphene nanosheets, which provided a short lithium ion diffusion path as well as facile electron conduction channels.     

High-capacity graphene oxide/graphite/carbon nanotube composites for use in Li-ion battery anodes

A composite of graphene oxide sheets, carbon nanotubes (CNTs), and commercial graphite particles was prepared. The composite’s use as a high-capacity and binder-free anode material for Li-ion batteries was examined. Results showed that this novel composite had a very high reversible Li-storage capacity of 1172.5 mA h g⁻¹ at 0.5C (1C = 372 mA g⁻¹), which is thrice that of commercial graphite anode. The composite also exceeded the theoretical sum of capacities of the three ingredients. More importantly, its reversible capacity below 0.25 V can reach up to 600 mA h g⁻¹. In summary, the graphene oxide/graphite/CNT composite had higher reversible capacity, better cycling performance, and similar rate capability compared with the graphene oxide/graphite composite.     

Synthesis and electrochemical properties of artificial graphite as an anode for high-performance lithium-ion batteries

Artificial graphite containing abundant in situ grown onion-like carbon hollow nanostructures (OCHNs) was prepared from nickel nanoparticles doped pitch and natural graphite flakes by hot-pressing sintering method. Galvanostatic discharge–charge tests indicate that the synthetic graphite with abundant OCHNs exhibits a high specific capacity of 460 mA h g⁻¹ at 20 mA g⁻¹ as well as an excellent rate capability, with a reversible capacity of 220 mA h g⁻¹ at 1 A g⁻¹. Besides the advantages of common graphite anode materials, these superiorities make synthetic graphite a very promising anode for high-performance lithium-ion batteries.     

Carbon-coated SiO/ZrO2 composites as anode materials for lithium-ion batteries

A combination of high-energy ball milling and constant pressure chemical vapor deposition was used to prepare carbon-coated SiO/ZrO₂ composites. It was found that the as-prepared composites were composed of amorphous carbon, amorphous SiO, and paracryslalline ZrO₂. The electrochemical analysis results revealed excellent electrochemical performances for the composites, including a high initial discharge capacity (1737 mA h g⁻¹), a remarkable cyclic stability (reversible capacity of 721 mA h g⁻¹ at 800 mA g⁻¹, after 100 cycles), and a good rate capability (870 mA h g⁻¹ at 800 mA g⁻¹). These features demonstrate that these composites are promising alternative candidates for high-efficiency electrode materials of Li-ion batteries.     

Pseudocapacitive Li+ intercalation in ZnO/ZnO@C composites enables high-rate lithium-ion storage and stable cyclability

Metallic oxide ZnO is considered to be a promising alternative anode material for lithium ion battery because of its high theoretical capacities (978 mA h g⁻¹). However, its inherent low electronic conductivity and undesirable large volume change result in inferior electrochemical performances and hinder its practical application. Herein, ZnO/ZnO@C composites are prepared by a simple carbonization process of ZnO/ZnO@ZIFs-8, which are constructed by using ZnO particles as both template and zinc sources for zeolitic imidazolate frameworks-8 (ZIF-8) preparation via a facile solution reaction. When evaluated as anode for lithium ion batteries, the as-prepared composites show an initial capacity of 878 mA h g⁻¹ at current density of 0.1 A g⁻¹ with high capacity retention of 95.6% after 50 cycles, and an initial capacity of 359 mA h g⁻¹ tested at 5.0 A g⁻¹ with a capacity retention of 85.3% after 500 cycles, exhibiting outstanding cycling stability and excellent rate capability. The ameliorated electrochemical performances are mainly attributed to the elevated conductivity and cushioning effects provided by carbon framework derived from ZIF-8, and the enhanced pseudocapacitance behavior originated from the decreased size of ZnO particles and high surface area of ZIFs-derived carbon.     

Hollow core–shell ZnMn2O4 microspheres as a high-performance anode material for lithium-ion batteries

The hollow core–shell ZnMn₂O₄ microspheres are successfully prepared by a solvothermal carbon templating method and then a annealing process. The crystal phase and particle morphology of resultant ZnMn₂O₄ microspheres are characterized by XRD and TEM. The electrochemical properties of the ZnMn₂O₄ microspheres as an anode material are investigated for lithium ion batteries. The results show that the ZnMn₂O₄ microspheres exhibit a reversible capacity of 855.8 mA h g⁻¹ at a current density of 200 mA g⁻¹ after 50 cycles. Even at 1000 mA g⁻¹, the reversible capacity of the ZnMn₂O₄ microspheres is still kept at 724.4 mA h g⁻¹ after 60 cycles. The enhanced electrochemical performance suggests the promising potential of the hollow core–shell ZnMn₂O₄ microspheres in lithium-ion batteries.     

Fabrication of MnO@C-CNTs composite by CVD for enhanced performance of lithium ion batteries

A novel MnO@Amorphous C-Carbon nanotubes (MnO@C-CNTs) composite is prepared by chemical vapor deposition (CVD). When used as an anode material for Li-ion batteries, the MnO@C-CNTs composite exhibits an initial discharge capacity of 1164 mA h g⁻¹ at 100 mA g⁻¹ and the discharge capacity gradually increased from 571.7 mA h g⁻¹ to 654 mA h g⁻¹ after 100 cycles at 1 A g⁻¹, which shows an increase of the capacity rather than attenuation. Furthermore, the MnO@C-CNTs electrode can deliver a capacity of up to 228 mA h g⁻¹ at 5 A g⁻¹. These results indicate that the three-dimensional conductive network of the MnO@C-CNTs composite could prevent the aggregation of MnO particles, and its open structure allows electrolyte penetration, and reduces the diffusion path of the lithium ions, hence maximizes utilization of the electrochemically active MnO particles, while enhances the conductivity of electrode material and Li⁺ transport. This work offers a universal approach to design various metal oxides@C-CNTs composite.     

One-step microwave-assisted synthesis of Sb2O3/reduced graphene oxide composites as advanced anode materials for sodium-ion batteries

Sb₂O₃/reduced graphene oxide (RGO) composites were prepared through a facile microwave-assisted reduction of graphite oxide in SbCl₃ precursor solution, and investigated as anode material for sodium-ion batteries (SIBs). The experimental results show that a maximum specific capacity of 503 mA h g⁻¹ is achieved after 50 galvanostatic charge/discharge cycles at a current density of 100 mA g⁻¹ by optimizing the RGO content in the composites and an excellent rate performance is also obtained due to the synergistic effect between Sb₂O₃ and RGO. The high capacity, superior rate capability and excellent cycling performance of Sb₂O₃/RGO composites demonstrate their excellent sodium-ion storage ability and show their great potential as electrode materials for SIBs.     

Investigation of Li5Cr7Ti6O25 as novel anode material for high-power lithium-ion batteries

In this work, Li₅Cr₇Ti₆O₂₅ as a new anode material for rechargeable batteries is fabricated through a simple sol-gel method at different calcination temperatures. The X-ray diffraction, scanning electron microscopy, high resolution transmission electron microscopy, charge/discharge curve and cyclic voltammograms are utilized to study the crystal structures, morphologies and electrochemical properties of as-obtained Li₅Cr₇Ti₆O₂₅ samples. The impact of calcination temperatures on morphologies and electrochemical properties of Li₅Cr₇Ti₆O₂₅ is discussed in detail. The test result shows that the 800 °C is a proper calcination temperature for Li₅Cr₇Ti₆O₂₅ with excellent electrochemical properties. Cycled at 200 mA g⁻¹, it displays a high initial reversible capacity of 146.6 mA h g⁻¹ and retains a considerable capacity of 130.8 mA h g⁻¹ after 300 cycles. Even cycled at large current density of 500 mA g⁻¹, the initial reversible capacity of 129.6 mA h g⁻¹ with the capacity retention of 88% after 300 cycles is achieved, which is obviously higher than that of Li₅Cr₇Ti₆O₂₅ prepared at 700 °C (80.5 mA h g⁻¹ and 68%) and 900 °C (98.4 mA h g⁻¹ and 80%). In addition, in-situ XRD analysis reveals that Li₅Cr₇Ti₆O₂₅ exhibits a reversible structural change during lithiation and delithiation processes. The above prominent electrochemical performance indicates the great potential of the Li₅Cr₇Ti₆O₂₅ obtained at 800 °C as anode material for rechargeable batteries.     

Carbon coated porous tin peroxide/carbon composite electrode for lithium-ion batteries with excellent electrochemical properties

A porous tin peroxide/carbon (SnO₂/C) composite electrode coated with an amorphous carbon layer is prepared using a facile method. In this electrode, spherical graphite particles act as supporter of electrode framework, and the interspace among particles is filled with porous amorphous carbon derived from decomposition of polyvinylidene fluoride and polyacrylonitrile. SnO₂ nanoparticles are uniformly embedded in the porous amorphous carbon matrix. The pores in amorphous carbon matrix are able to buffer the huge volume expansion of SnO₂ during charge/discharge cycling, and the carbon framework can prevent the SnO₂ particles from pulverization and re-aggregation. The carbon coating layer on the outermost surface of electrode can further prevent porous SnO₂/C electrode from contacting with electrolyte directly. As a result, the repeated formation of solid electrolyte interface is avoided and the cycling stability of electrode is improved. The obtained SnO₂/C electrode presents an initial coulombic efficiency of 77.3% and a reversible capacity of 742 mA h g⁻¹ after 130 cycles at a current density of 100 mA g⁻¹. Furthermore, a reversible capacity of 679 mA h g⁻¹ is obtained at 1 A g⁻¹.