Oxygen and superoxide-mediated redox kinetics of iron complexed by humic substances in coastal seawater

Complexes with terrestrially derived humic substances represent one of the most reactive pools of dissolved Fe in natural waters. In this work, redox kinetics of Fe-humic substance complexes (FeL) in simulated coastal seawater were investigated using chemiluminescence techniques with particular attention given to interactions with dioxygen (O2) and superoxide (O2?-). Although rate constants of FeIIL oxidation by O2 (5.6-52 M-1 · s-1) were 4-5 orders of magnitude less than those for O2?- (6.9-23 × 105 M-1 · s-1),O2 is likely to outcompete O2?- for FeIIL oxidation in coastal seawaters where steady-state O2?- concentrations are generally subnanomolar. Rate constants for FeIIIL reduction by O2?- of 1.8-5.6 × 104 M-1 · s-1 were also determined. From the balance of FeIIL oxidation rates and O2?- -mediated FeIIIL reduction rates, steady-state FeIIL concentrations were estimated to be in the subpicomolar to picomolar range, which is generally lower than measured in situ Fe(II) concentrations under relevant conditions. This suggests that (i) processes other than O2?- -mediated reduction (such as photochemical ligand-to-metal charge transfer) may be responsible for Fe(II) formation, (ii) the in situ ligands differ significantly from the humic substances used in this work, and/ or (iii) the influence of other environmental factors such as pH and temperature on Fe redox kinetics may have to be considered.     

Kinetic studies on Sb(III) oxidation by hydrogen peroxide in aqueous solution

Knowledge of antimony redox kinetics is crucial in understanding the impact and fate of Sb in the environment and optimizing Sb removal from drinking water. The rate of oxidation of Sb(III) with H2O2 was measured in 0.5 mol L(-1) NaCl solutions as a function of [Sb(III)], [H2O2], pH, temperature, and ionic strength. The rate of oxidation of Sb(III) with H2O2 can be described by the general expression: -d[Sb(III)]/dt= k[Sb(III)][H2O2][H+](-1) with log k = -6.88 (+/- 0.17) [kc min(-1)]. The undissociated Sb(OH)3 does not react with H2O2: the formation of Sb(OH)4- is needed for the reaction to take place. In a mildly acidic hydrochloric acid medium, the rate of oxidation of Sb(III) is zeroth order with respect to Sb(III) and can be described by the expression -d[Sb(III)]/dt = k[H2O2][H+][Cl-] with log k = 4.44 (+/- 0.05) [k. L2 mol(-2) min(-1)]. The application of the calculated rate laws to environmental conditions suggests that Sb(III) oxidation by H2O2 may be relevant either in surface waters with elevated H2O2 concentrations and alkaline pH values or in treatment systems for contaminated solutions with millimolar H2O2 concentrations.     

Kinetics and mechanistic aspects of As(III) oxidation by aqueous chlorine, chloramines, and ozone: relevance to drinking water treatment

Kinetics and mechanisms of As(III) oxidation by free available chlorine (FAC-the sum of HOCl and OCl-), ozone (O3), and monochloramine (NH2Cl) were investigated in buffered reagent solutions. Each reaction was found to be first order in oxidant and in As(III), with 1:1 stoichiometry. FAC-As(III) and O3-As(III) reactions were extremely fast, with pH-dependent, apparent second-order rate constants, k'app, of 2.6 (+/- 0.1) x 10(5) M(-1) s(-1) and 1.5 (+/- 0.1) x 10(6) M(-1) s(-1) at pH 7, whereas the NH2Cl-As(III) reaction was relatively slow (k'app = 4.3 (+/- 1.7) x 10(-1) M(-1) s(-1) at pH 7). Experiments conducted in real water samples spiked with 50 microg/L As(III) (6.7 x 10(-7) M) showed that a 0.1 mg/L Cl2 (1.4 x 10-6 M) dose as FAC was sufficient to achieve depletion of As(III) to <1 microg/L As(III) within 10 s of oxidant addition to waters containing negligible NH3 concentrations and DOC concentrations <2 mg-C/L. Even in a water containing 1 mg-N/L (7.1 x 10(-5) M) as NH3, >75% As(III) oxidation could be achieved within 10 s of dosing 1-2 mg/L Cl2 (1.4-2.8 x 10(-5) M) as FAC. As(III) residuals remaining in NH3-containing waters 10 s after dosing FAC were slowly oxidized (t1/2 > or = 4 h) in the presence of NH2Cl formed by the FAC-NH3 reaction. Ozonation was sufficient to yield >99% depletion of 50 microg/L As(III) within 10 s of dosing 0.25 mg/L O3 (5.2 x 10(-6) M) to real waters containing <2 mg-C/L of DOC, while 0.8 mg/L O3 (1.7 x 10(-5) M) was sufficientfor a water containing 5.4 mg-C/L of DOC. NH3 had negligible effect on the efficiency of As(III) oxidation by O3, due to the slow kinetics of the O3-NH3 reaction at circumneutral pH. Time-resolved measurements of As(III) loss during chlorination and ozonation of real waters were accurately modeled using the rate constants determined in this investigation.     

Efficient dechlorination of carbon tetrachloride by hydrophobic green rust intercalated with dodecanoate anions

The reductive dechlorination of carbon tetrachloride (CT) by Fe(II)-Fe(III) hydroxide (green rust) intercalated with dodecanoate, Fe(II)(4)Fe(III)(2)(OH)(12)(C(12)H(23)O(2))(2) · yH(2)O (designated GR(C12)), at pH ~ 8 and at room temperature was investigated. CT at concentration levels similar to those found in heavily contaminated groundwater close to polluted industrial sites (14-988 μM) was reduced mainly to the fully dechlorinated products carbon monoxide (CO, yields >54%) and formic acid (HCOOH, yields >6%). Minor formation of chloroform (CF), the only chlorinated degradation product, was also detected (yields <6.3%). Reactions carried out with excess GR followed pseudo first-order kinetics with respect to CT with rate constants ranging from 6.5 × 10(-2) to 0.47 h(-1). These rate constants are comparable to those measured for CT dechlorinations mediated by zerovalent iron. Reduction of the highest concentration of CT (1.4 mM) proceeds until 56% of the Fe(II) sites of GR(C12) was consumed. This reaction ceased after 10 h due to surface passivation of GR(C12).     

Competitive reduction of pertechnetate (99TcO4-) by dissimilatory metal reducing bacteria and biogenic Fe(II)

The fate of pertechnetate ((99)Tc(VII)O(4)(-)) during bioreduction was investigated in the presence of 2-line ferrihydrite (Fh) and various dissimilatory metal reducing bacteria (DMRB) (Geobacter, Anaeromyxobacter, Shewanella) in comparison with TcO(4)(-) bioreduction in the absence of Fh. In the presence of Fh, Tc was present primarily as a fine-grained Tc(IV)/Fe precipitate that was distinct from the Tc(IV)O(2)·nH(2)O solids produced by direct biological Tc(VII) reduction. Aqueous Tc concentrations (<0.2 μm) in the bioreduced Fh suspensions (1.7 to 3.2 × 10(-9) mol L(-1)) were over 1 order of magnitude lower than when TcO(4)(-) was biologically reduced in the absence of Fh (4.0 × 10(-8) to 1.0 × 10(-7) mol L(-1)). EXAFS analyses of the bioreduced Fh-Tc products were consistent with variable chain length Tc-O octahedra bonded to Fe-O octahedra associated with the surface of the residual or secondary Fe(III) oxide. In contrast, biogenic TcO(2)·nH(2)O had significantly more Tc-Tc second neighbors and a distinct long-range order consistent with small particle polymers of TcO(2). In Fe-rich subsurface sediments, the reduction of Tc(VII) by Fe(II) may predominate over direct microbial pathways, potentially leading to lower concentrations of aqueous (99)Tc(IV).     

Surprising formation of p-cymene in the oxidation of α-pinene in air by the atmospheric oxidants OH, O3, and NO3

Anthropogenic sources release into the troposphere a wide range of volatile organic compounds (VOCs) including aromatic hydrocarbons, whose major sources are believed to be combustion and the evaporation of fossil fuels. An important question is whether there are other sources of aromatics in air. We report here the formation of p-cymene [1-methyl-4-(1-methylethyl) benzene, C6H4(CH3)(C3H7)] from the oxidation of α-pinene by OH, O3, and NO3 at 1 atm in air and 298 K at low (<5%) and high (70%) relative humidities (RH). Loss of α-pinene and the generation of p-cymene were measured using GC-MS. The fractional yields of p-cymene relative to the loss of α-pinene, Δ [p-cymeme]/Δ [α-pinene], were measured to range from (1.6±0.2)×10(-5) for the O3 reaction to (3.0±0.3)×10(-4) for the NO3 reaction in the absence of added water vapor. The yields for the OH and O3 reactions increased by a factor of 4-8 at 70% RH (uncertainties are ±2s). The highest yields at 70% RH for the OH and O3 reactions, ～15 times higher than for dry conditions, were observed if the walls of the Teflon reaction chamber had been previously exposed to H2SO4 formed from the OH oxidation of SO2. Possible mechanisms of the conversion of α-pinene to p-cymene and the potential importance in the atmosphere are discussed.     

Oxidation of Fe(II) in natural waters at high nutrient concentrations

The Fe(II) oxidation kinetic was studied in seawater enriched with nutrients as a function of pH (7.2-8.2), temperature (5-35 °C), and salinity (10-36.72) and compared with the same parameters in seawater media. The effect of nitrate (0-1.77 × 10(-3) M), phosphate (0-5.80 × 10(-5) M) and silicate (0-2.84 × 10(-4) M) was studied at pH 8.0 and 25 °C. The experimental results demonstrated that Fe(II) oxidation was faster in high nutrient concentrations affecting the lifetime of Fe(II) in nutrient rich waters. Silicate displayed the most significant effects on the Fe(II) oxidation rate with values similar to those determined in seawater enriched with all the nutrients. A kinetic model was applied to the experimental results in order to account for changes in the speciation and to compute the fractional contribution of each Fe(II) species to the total rate constant as a function of pH. FeH(3)SiO(4)(+) played a key role in the Fe(II) speciation, dominating the process at pH over 8.4. At pH 8.0, FeH(3)SiO(4)(+) represented 18% of the total Fe(II) species. Model results show that when the concentration of silicate is 3 × 10(-5) M as in high nutrient low chlorophyll areas, FeH(3)SiO(4)(+) contributed at pH 8.0 by 4% increasing the rate to 11% at 1.4 × 10(-4) M. The effect of nutrients, especially silicate, must be considered in any further study in seawater media cultures and eutrophic oceanic areas.     

Arsenic(III) oxidation by birnessite and precipitation of manganese(II) arsenate

Solution chemical techniques were used to investigate the oxidation of As(III) to As(V) in 0.011 M arsenite suspension of well-crystallized hexagonal birnessite (H-birnessite, 2.7 g L(-1)) at pH 5. Products of the reaction were studied by scanning electron microscopy coupled with energy dispersive spectroscopy (SEM-EDS), atomic force microscopy (AFM), and X-ray absorption near-edge structure spectroscopy (XANES). In the initial stage (first 74 h), chemical results have been interpreted quantitatively, and the reaction is shown to proceed in two steps as suggested by previous authors: 2>Mn(IV)O2 + H3AsO3 + H2O --> 2>Mn(III)OOH + H2AsO4- + H+ and 2>Mn(III)OOH + H3AsO3 + 3H+ --> 2Mn2+ + H2AsO4- + 2H2O. The As(III) depletion rate was lower (0.02 h(-1)) than measured in previous studies because of the high crystallinity of the H-birnessite sample used in this study. The surface reaction sites are likely located on the edges of H-birnessite layers rather than on the basal planes. The ion activity product of Mn(II) and As(V) reached after 74 h reaction time was the solubility product of a protonated manganese arsenate, having a chemical composition close to that of krautite as identified by XANES and EDS. Krautite precipitation reaction can be written as follows: Mn2+ + H2AsO4- + H2O = MnHAsO4 x H2O + H+ log Ks approximately -0.2. Equilibrium was reached after 400 h. The manganese arsenate precipitate formed long fibers that aggregated at the surface of H-birnessite. The oxidation reaction transforms a toxic species, As(III), to a less toxic aqueous species, which further precipitates with Mn2+ as a mixed As-Mn solid characterized by a low solubility product.     

Relative decay of fecal indicator bacteria and human-associated markers: a microcosm study simulating wastewater input into seawater and freshwater

Fecal contaminations of inland and coastal waters induce risks to human health and economic losses. To improve water management, specific markers have been developed to differentiate between sources of contamination. This study investigates the relative decay of fecal indicator bacteria (FIB, Escherichia coli and enterococci) and six human-associated markers (two bacterial markers: Bacteroidales HF183 (HF183) and Bifidobacterium adolescentis (BifAd); one viral marker: genogroup II F-specific RNA bacteriophages (FRNAPH II); three chemical markers: caffeine and two fecal stanol ratios) in freshwater and seawater microcosms seeded with human wastewater. These experiments were performed in darkness, at 20 °C and under aerobic conditions. The modeling of the decay curves allows us (i) to compare FIB and markers and (ii) to classify markers according to their persistence in seawater (FRNAPH II < HF183, stanol ratios < BifAd, caffeine) and in freshwater (HF183, stanol ratios < FRNAPH II < BifAd < caffeine). Although those results depend on the experimental conditions, this study represents a necessary step to develop and validate an interdisciplinary toolbox for the investigation of the sources of fecal contaminations.     

Oxidation of nanomolar levels of Fe(II) with oxygen in natural waters

The oxidation of Fe(II) by molecular oxygen at nanomolar levels has been studied using a UV-Vis spectrophotometric system equipped with a long liquid waveguide capillary flow cell. The effect of pH (6.5-8.2), NaHCO3 (0.1-9 mM), temperature (3-35 degrees C), and salinity (0-36) on the oxidation of Fe(II) are presented. The first-order oxidation rates at nanomolar Fe(II) are higher than the values at micromolar levels at a pH below 7.5 and lower than the values at a higher pH. A kinetic model has been developed to consider the mechanism of the Fe(II) oxidation and the speciation of Fe(II) in seawater, the interactions between the major ions, and the oxidation rates of the different Fe(II) species. The concentration of Fe(II) is largely controlled by oxidation with O2 and O2.- but is also affected by hydrogen peroxide that may be both initially present and formed from the oxidation of Fe(II) by superoxide. The model has been applied to describe the effect of pH, concentration of NaHCO3, temperature, and salinity on the kinetics of Fe(II) oxidation. At a pH over 7.2, Fe(OH)2 is the most important contributing species to the apparent oxidation rate. At high levels of CO3(2-) and pH, the Fe(CO3)2(2-) species become important. At pH values below 7, the oxidation rate is controlled by Fe2+. Using the model, log k(i) values for the most kinetically active species (Fe2+, Fe(OH)+, Fe(OH)2, Fe(CO3), and Fe(CO3)2(2-)) are given that are valid over a wide range of temperature, salinity, and pH in natural waters. Model results showthatwhen H2O2 concentrations approach the Fe(II) concentrations used in this study, the oxidation of Fe(II) with H2O2 also needs to be considered.     

Modeling complexometric titrations of natural water samples

Complexometric titrations are the primary source of metal speciation data for aquatic systems, yet their interpretation in waters containing humic and fulvic acids remains problematic. In particular, the accuracy of inferred ambient free metal ion concentrations and parameters quantifying metal complexation by natural ligands has been challenged because of the difficulties inherent in calibrating common analytical methods and in modeling the diverse array of ligands present. This work tests and applies a new method of modeling titration data that combines calibration of analytical sensitivity (S) and estimation of concentrations and stability constants for discrete natural ligand classes ([Li]T and Ki) into a single step using nonlinear regression and a new analytical solution to the one-metal/two-ligand equilibrium problem. When applied to jointly model data from multiple titrations conducted at different analytical windows, it yields accurate estimates of S, [Li]T, Ki, and [Cu2+] plus Monte Carlo-based estimates of the uncertainty in [Cu2+]. Jointly modeling titration data at low-and high-analytical windows leads to an efficient adaptation of the recently proposed "overload" approach to calibrating ACSV/CLE measurements. Application of the method to published data sets yields model results with greater accuracy and precision than originally obtained. The discrete ligand-class model is also re-parametrized, using humic and fulvic acids, L1 class (K1 = 10(13) M(-1)), and strong ligands (L(S)) with K(S) > K1 as "natural components". This approach suggests that Cu complexation in NW Mediterranean Sea water can be well represented as 0.8 +/- 0.3/0.2 mg humic equiv/L, 13 +/- 1 nM L1, and 2.5 +/- 0.1 nM L(S) with [CU]T = 3 nM. In coastal seawater from Narragansett Bay, RI, Cu speciation can be modeled as 0.6 +/- 0.1 mg humic equiv/L and 22 +/- 1 nM L1 or approximately 12 nM L1 and approximately 9 nM L(S), with [CU]T = 13 nM. In both waters, the large excess (approximately 10 nM) of high-affinity, Cu-binding ligands over [CU]T results in low equilibrium [Cu2+] of 10(-14.5 +/- 0.2) M and 10(-13.3 +/- 0.4) M, respectively.     

Oxidation of phenolic endocrine disrupting chemicals by potassium permanganate in synthetic and real waters

In this study, five selected environmentally relevant phenolic endocrine disrupting chemicals (EDCs), estrone, 17β-estradiol, estriol, 17α-ethinylestradiol, and 4-n-nonylphenol, were shown to exhibit similarly appreciable reactivity toward potassium permanganate [Mn(VII)] with a second-order rate constant at near neutral pH comparable to those of ferrate(VI) and chlorine but much lower than that of ozone. In comparison with these oxidants, however, Mn(VII) was much more effective for the oxidative removal of these EDCs in real waters, mainly due to the relatively high stability of Mn(VII) therein. Mn(VII) concentrations at low micromolar range were determined by an ABTS [2,2-azino-bis(3-ethylbenzothiazoline)-6-sulfonic acid diammonium] spectrophotometric method based on the stoichiometric reaction of Mn(VII) with ABTS [Mn(VII) + 5ABTS → Mn(II) + 5ABTS(?+)] forming a stable green radical cation (ABTS(?+)). Identification of oxidation products suggested the initial attack of Mn(VII) at the hydroxyl group in the aromatic ring of EDCs, leading to a series of quinone-like and ring-opening products. The background matrices of real waters as well as selected model ligands including phosphate, pyrophosphate, NTA, and humic acid were found to accelerate the oxidation dynamics of these EDCs by Mn(VII). This was explained by the effect of in situ formed dissolved Mn(III), which could readily oxidize these EDCs but would disproportionate spontaneously without stabilizing agents.     

Kinetic model for Fe(II) oxidation in seawater in the absence and presence of natural organic matter

A detailed kinetic model has been developed to describe the oxidation of Fe(II) in seawater in both the absence and the presence of natural organic material. Experimental data were collected using a luminol chemiluminescence-based method to measure Fe(II), assuming that both the inorganic and the organically complexed species were detected. In the absence of organic matter, the data were modeled based on the Haber-Weiss mechanism with the inclusion of a back-reaction of Fe(III) with superoxide and precipitation of Fe(OH)3. Both reactions were found to be significant using sensitivity analysis. When organic matter is present, the model was extended by organic complexation of Fe(II) and Fe(III) with the creation of a parallel oxidation pathway for Fe(II). Fe(II) oxidation at natural (nanomolar) concentrations was accurately predicted for a range of organic concentrations. The model also accounted for scavenging of superoxide by sub-nanomolar levels of dissolved copper and by organic matter when present. The presence of a relatively strong Fe(III) binding ligand was observed to significantly increase the rate of Fe(II) oxidation, while ultimately retaining most of the iron in the system in dissolved (organically complexed) form. The complexation reactions and reaction of inorganic and organically bound Fe(II) with oxygen were found to be critical reactions in the system, while Fe(III) hydrolysis became unimportant even at low organic concentrations. The superoxide radical was also observed to have a major role in the cycling of iron due to its ability to act as both an oxidant and a reductant. The model indicates that the rate constant for the reaction of Fe(II) with O2 has generally been underestimated in previous work and that the secondary oxidation of Fe(II) by H2O2 and subsequently OH* plays a relatively minor role in these systems.     

Formate ion decomposition in water under UV irradiation at 253.7 nm

Formate ion (HCO2-) occurs in natural waters as a result of photooxidation of humic substances. Under UV irradiation, as applied in water purification (253.7 nm), formate ion decomposed following split-rate pseudo-zero-order kinetics (k1 and k2 are initial and final rate constants, respectively). In the presence of dissolved oxygen (DO), it was found that (a) k1 < k2, (b) k1 and k2 increased with initial formate ion concentration ([HCO2-]0 = (1.73-38.3) x 10(-5) mol L(-1)) and absorbed UV intensity (Ia = (1.38-3.99) x 10(-6) mol quanta L(-1) s(-1)), and (c) k1 and k2 were relatively insensitive to initial pH (pHo = 5.41-8.97) in buffer-free solutions. Both rate constants decreased with increasing carbonate alkalinity ((0-1.0) x 10(-3) mol L(-1)) and k1 was virtually unchanged in phosphate buffer at pH0 between 5.25 and 9.92. Carbonate buffer lowered the rate of formate ion decay, possibly due to scavenging of OH* radicals. Initial rate constant k1 slightly increased with temperature (15-35 degrees C), while k2 remained unchanged. The reaction pH increased rapidly during irradiation of buffer-free NaHCO2 solution to approach an equilibrium level as [HCO2-] reached the method detection level (MDL). The pH profile of buffer-free formate ion decay was estimated using closed-system equilibrium analysis. DO utilization during UV irradiation was 0.5 mol of O2/mol of HCO2-, while nonpurgeable organic carbon (NPOC) measurements on kinetic samples closely followed the HCO2- profile, thus strongly suggesting the transformation of HCO2- -C to CO2 in the presence of DO. In DO-free water, k1 > k2 was observed. Furthermore, k(1,DO FREE) > k(1,DO) (k(1,DO) = k1) and k(2,DO FREE) < k(2,DO) (k(2,DO) = k2). The effect of dual acid solutions on HCO2- decay was examined in a mixture of NaHCO2 and sodium oxalate (Na2C2O4). HCO2- decomposed readily until [HCO2-] approximately equal to MDL but at a lower rate than in buffer-free HCO2- solutions, while C2O4(2-) remained virtually unchanged. C2O4(2-) decay commenced following near complete conversion of HCO2-.     

Photoinduced oxidation of arsenite to arsenate in the presence of goethite

The photochemistry of an aqueous suspension of goethite in the presence of arsenite (As(III)) was investigated with X-ray absorption near edge structure (XANES) spectroscopy and solution-phase analysis. Irradiation of the arsenite/goethite under conditions where dissolved oxygen was present in solution led to the presence of arsenate (As(V)) product adsorbed on goethite and in solution. Under anoxic conditions (absence of dissolved oxygen), As(III) oxidation occurred, but the As(V) product was largely restricted to the goethite surface. In this circumstance, however, there was a significant amount of ferrous iron release, in stark contrast to the As(III) oxidation reaction in the presence of dissolved oxygen. Results suggested that in the oxic environment ferrous iron, which formed via the photoinduced oxidation of As(III) in the presence of goethite, was heterogeneously oxidized to ferric iron by dissolved oxygen. It is likely that aqueous reactive oxygen species formed during this process led to the further oxidation of As(III) in solution. Results from the current study for As(III)/goethite also were compared to results from a prior study of the photochemistry of As(III) in the presence of another iron oxyhydroxide, ferrihydrite. The comparison showed that at pH 5 and 2 h of light exposure the instantaneous rate of aqueous-phase As(V) formation in the presence of goethite (12.4 × 10(-5) M s(-1) m(-2)) was significantly faster than in the presence of ferrihydrite (6.73 × 10(-6) M s(-1) m(-2)). It was proposed that this increased rate of ferrous iron oxidation in the presence of goethite and dissolved oxygen was the primary reason for the higher As(III) oxidation rate when compared to the As(III)/ferrihydrite system. The surface area-normalized pseudo-first-order rate constant, for example, associated with the heterogeneous oxidation of Fe(II) by dissolved oxygen in the presence of goethite (1.9 × 10(-6) L s(-1) m(-2)) was experimentally determined to be considerably higher than if ferrihydrite was present (2.0 × 10(-7) L s(-1) m(-2)) at a solution pH of 5.     

Reductive transformation of birnessite by aqueous Mn(II)

Reaction of aqueous Mn(II) with hexagonal birnessite at pH 7.5 causes reductive transformation of birnessite into feitknechtite (β-Mn(III)OOH) and manganite (γ-Mn(III)OOH) through interfacial electron transfer from adsorbed Mn(II) to structural Mn(IV) atoms and arrangement of product Mn(III) into MnOOH, summarized by Mn(II) + Mn(IV)O(2) + 2 H(2)O → 2 Mn(III)OOH + 2 H(+). Feitknechtite is the initial transformation product, and subsequently converted into the more stable manganite polymorph during ongoing reaction with Mn(II). Feitknechtite production is observed at Mn(II) concentrations 2 orders of magnitude below thermodynamic thresholds, reflecting uncertainty in thermodynamic data of Mn-oxide minerals and/or specific interactions between Mn(II) and birnessite surface sites facilitating electron exchange. Under oxic conditions, feitknechtite formation through surface-catalyzed oxidation of Mn(II) by O(2) leads to additional Mn(II) removal from solution relative to anoxic systems. These results indicate that Mn(II) may be an important moderator of the reductive arm of Mn-oxide redox cycling, and suggest a controlling role of Mn(II) in regulating the solubility and speciation of phyllomanganate-reactive metal pollutants including Co, Ni, As, and Cr in geochemical environments.     

New processes in the environmental chemistry of nitrite. 2. The role of hydrogen peroxide

The oxidation of nitrite and nitrous acid to *NO2 upon irradiation of dissolved Fe(III), ferric (hydr)oxides, and nitrate has previously been shown to enhance phenol nitration. This allowed the proposal of a new role for nitrite and nitrous acid in natural waters and atmospheric aerosols. This paper deals with the interaction between hydrogen peroxide, a key environmental factor in atmospheric oxidative chemistry, and nitrite/nitrous acid. The reaction between nitrous acid and hydrogen peroxide yields peroxynitrous acid, a powerful nitrating agent and an important intermediate in atmospheric chemistry. The kinetics of this reaction is compatible with a rate-determining step involving either H3O2+ and HNO2 or H2O2 and protonated nitrous acid. In the former case the rate constant between the two species would be 179.6 +/- 1.4 M(-1) s(-1), in the latter case it would be as high as (1.68 +/- 0.01) x 10(10) M(-1) s(-1) (diffusion-controlled reaction). Due to the more reasonable value of the rate constant, the reaction between H3O2+ and HNO2 seems more likely. In the presence of HNO2 + H2O2 the nitration of phenol is strongly enhanced when compared with HNO2 alone. The nitration rate of phenol in the presence of peroxynitrous acid decreases as pH increases, thus HOONO is a potential source of atmospheric nitroaromatic compounds in acidic water droplets. The mixture Fe(II) + H2O2 (Fenton reagent) can oxidize nitrite and nitrous acid to nitrogen dioxide, which results in phenol nitration. The nitration in the presence of Fe(II) + H2O2 + NO2-/HNO2 occurs more rapidly than the one with H2O2 + NO2-/HNO2 at pH 5, where little HNO2 is available to directly react with hydrogen peroxide. Both systems, however, are more effective than NO2-/HNO2 alone in producing nitrophenols from phenol. Another process leading to the oxidation of nitrite to nitrogen dioxide is the photo-Fenton one. It can be relevant at pH > or = 6, as nitrite does not react with H2O2 at room temperature. Under such conditions the source of Fe(II) is the photolysis of ferric (hydr)oxides (heterogeneous photo-Fenton reaction). In the presence of nitrite this reaction induces very effective nitrophenol formation from phenol.     

Adsorption and uptake of Cu by Emiliania huxleyi in natural seawater

Short-term kinetic experiments, carried out in natural coastal seawater (with predetermined background levels of trace metals and organic ligands, L) enriched with nitrate and phosphate, demonstrated that Emiliania huxleyi was able to uptake Cu very quickly. After 10 min of exposure (background Cu level in the inoculated cells: [Cu]total cellular = 9.3 x 10(-17) mol cell-1, [Cu]intracellular = 8.4 x 10(-17) mol cell-1, and [Cu]extracellular = 1.0 x 10(-17) mol cell-1) to a natural seawater which contained 29 nM total initial dissolved Cu concentration ([Cu]d) (29 nM [CuL] and 3.2 x 10(-13) M free Cu concentration, [Cu2+]) the intracellular Cu was already 28 x 10(-17) mol cell-1. This value corresponded to 85% of the intracellular metal observed in pseudoequilibrium conditions (after 24 h of exposure) and to 88% of the total metal sorption (adsorption plus uptake) after 10 min. In contrast, the external adsorption after 10 min was only 3.0 x 10(-17) mol cell-1 which corresponded to 60% of the extracellular metal in pseudoequilibrium conditions. Simultaneously occurred a very fast release of organic ligands (L) by E. huxleyi, the majority being identified by cathodic stripping voltammetry as glutathione. The production of exudates increased with both Cu concentration and exposure time. After 10 min of exposure, the production of exudates in a medium with 129 nM [Cu]d (72 nM [CuL] and 7.9 x 10(-13) M [Cu2+]) was 51 nM, about 42% of that observed in pseudoequilibrium. As the Cu complexes with the organic ligands present in the medium were very stable (logarithm of the conditional stability constant: 12.18 +/- 0.06) and the ligand concentration in the medium was relatively high (e.g. 123 nM CL in the medium with 129 nM initial [Cu]d after 10 min of exposure) most of the metal was organically bound in the medium.     

Ionizing radiation-induced destruction of benzene and dienes in aqueous media

Pulse radiolysis with spectrophotometric and conductometric detection was utilized to study the formation and reactions of radicals from benzene and dienes in aqueous solutions. The benzene OH adduct, *C6H6OH, reacts with O2 (k = 3 x 10(8) L mol(-1) s(-1)) in a reversible reaction. The peroxyl radical, HOC6H6O2*, undergoes O2*- elimination, bimolecular decay, and reaction with benzene to initiate a chain reaction, depending on the dose rate, benzene concentration, and pH. The occurrence of the chain reaction is demonstrated in low-dose-rate gamma radiolysis experiments where the consumption of O2 was monitored. 1,4-Cyclohexadiene, 1,4-hexadiene, and 1,4-pentadiene form OH-adducts and undergo H-abstraction by O*- radicals. The OH-adducts react with O2 to form peroxyl radicals. These peroxyl radicals, however, do not undergo unimolecular O2*- elimination but rather decay by second-order processes, which lead to subsequent steps of O2*- elimination.     

Nickel speciation and complexation kinetics in freshwater by ligand exchange and DPCSV

A technique of ligand exchange with DMG (dimethylglyoxime) and DPCSV was applied to determine Ni speciation in lake, river, and groundwater samples. The working conditions related to ligand-exchange equilibrium were optimized, and the ligand-exchange kinetics were examined. The observed pseudo-first-order rate, kobsd, was about 3 x 10(-5) (s-1) for Ni(DMG)2 complex formation with an excess of DMG (microM) over Ni (nM) at pH 7.1-7.7. The second-order exchange kinetic constants, kexch, were between 1.2 x 10(2) and 5.7 x 10(3) s-1 M-1 for ligand exchange of NiEDTA with DMG and between 5 x 10(2) and 7 x 10(3) s-1 M-1 for exchange of natural ligands with DMG in the freshwater samples under similar conditions. Ni ligand exchange between natural ligands and DMG occurred over days with half-lifes of 5-95 h. Total dissolved Ni concentrations in samples from various freshwater systems in Switzerland ranged from 4 nM in an oligotrophic lake to 30 nM in a small river affected by inputs from sewage effluents and agriculture. Free ionic Ni2+ concentrations were determined in the range of 10(-13)-10(-15) M (pNi = 12.2-14.7), indicating that more than 99.9% of dissolved Ni was bound by organic ligands with strong affinity (log K 12.1-14.9) and low concentrations (13-100 nM) at pH 7.2-8.2. Because of slow ligand-exchange kinetics, Ni speciation in natural waters may in many cases not reach equilibrium.