Synthesis of amphiphilic ethyl cellulose grafting poly(acrylic acid) copolymers and their self-assembly morphologies in water

Amphiphilic ethyl cellulose (EC)-g-poly(acrylic acid) (PAA) copolymers were synthesized by atom transfer radical polymerization (ATRP). Firstly, ethyl cellulose macro-initiators with the degree of the 2-bromoisobutyryl substitution of 0.04 and 0.25 synthesized by the esterification of the hydroxyl groups remained in EC macromolecular chains and the 2-bromoisobutyryl bromides. Secondly, tert-butyl acrylate was polymerized by ATRP with the ethyl cellulose macro-initiator and EC-g-PtBA copolymers were prepared. Finally, the EC-g-PAA copolymers were prepared by hydrolyzing tert-butyl group of the EC-g-PtBA copolymers. The grafting copolymers were characterized by means of GPC, ¹H NMR and FTIR spectroscopies. The molecular weight of graft copolymers increased during the polymerization and the polydispersity was low. A kinetic study showed that the polymerization was first-order. Meanwhile, EC-g-PAA copolymers were self-assembled to micelles or particles with diameters of 5 nm and 100 nm in water (pH = 10) when the concentration was 1.0 mg/ml.     

Double-responsive core-shell-corona micelles from self-assembly of diblock copolymer of poly(t-butyl acrylate-co-acrylic acid)-b-poly(N-isopropylacrylamide)

Self-assembly of poly(t-butyl acrylate-co-acrylic acid)-b-poly(N-isopropylacrylamide) [P(tBA-co-AA)-b-PNIPAM], which was obtained from part hydrolysis of PtBA-b-PNIPAM synthesized by sequential atom transfer radical polymerization (ATRP) was studied. Thermo- and pH-responsive core-shell-corona (CSC) micelles with different structures were formed from (PtBA-co-PAA)-b-PNIPAM in aqueous solution. At pH 5.8 and 25 °C, the block copolymer self-assembled into spherical core-shell micelles with hydrophobic PtBA segments as the core, hydrophilic PAA/PNIPAM segments as the mixed shell. Increasing temperatures, core-shell micelles converted into CSC micelles with PtBA as the core, collapsed PNIPAM as the shell and soluble PAA as the corona. Moreover, decreasing pH at 25 °C, PAA chains collapsed onto the core resulting in CSC micelles with PtBA as the core, PAA as the shell and PNIPAM as the corona.     

Self-assembly of pH-responsive and fluorescent comb-like amphiphilic copolymers in aqueous media

“Comb-like” graft copolymers, consisting of a poly((N-vinylcarbazole)-co-(4-vinylbenzyl chloride)) (P(NVK-co-VBC)) copolymer backbone from free radical polymerization and poly(((2-dimethylamino)ethyl methacrylate)-co-(tert-butyl acrylate)) (P(DMAEMA-co-tBA)) side chains from atom transfer radical polymerization (ATRP), were hydrolyzed to produce the acrylic acid (AAc)-containing “comb-like” graft copolymers of P(NVK-co-VBC)-comb-P(DMAEMA-co-AAc). The amphiphilic copolymers possess a fluorescent hydrophobic P(NVK-co-VBC) backbone and pH-sensitive hydrophilic P(DMAEMA-co-AAc) side chains. Arising from acid-base interaction of the hydrophilic side chains, the copolymers can self-assemble into pH-responsive fluorescent and multi-walled hollow vesicles of well-defined morphology in aqueous media. The size and layered wall thickness of the vesicles are also dependent on the length of the copolymer side chains, while the number of wall layers is dependent on the concentration of the vesicles in the aqueous media. In comparison, a N-isopropylacrylamide (NIPAAm)-containing comb-like amphiphilic copolymer (P(NVK-co-VBC)-comb-P(NIPAAm-co-DMAEMA)) of similar structure, albeit with non-interacting hydropholic side chains, self-assembles only into temperature and pH-responsive single-shelled hollow nanoparticles in aqueous media.     

Synthesis of amphiphilic triblock copolymers and application for morphology control of calcium carbonate crystals

A series of amphiphilic triblock copolymers poly(ethylene glycol)-block-poly(acrylic acid)-block-poly(n-butyl acrylate) (PEG-b-PAA-b-PnBA) differing only in the relative block lengths were synthesized by the acid-catalyzed elimination of the tert-butyl groups from poly(ethylene glycol)-block-poly(tert-butyl acrylate)-block-poly(n-butyl acrylate) (PEG-b-PtBA-b-PnBA), which was synthesized by atom-transfer radical polymerization (ATRP). The degree of polymerization, molecular weight and percentage of hydrolysis of the product PEG-b-PAA-b-PnBA were studied by gel permeation chromatography (GPC), NMR and matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI-TOF-MS). Dynamic light scattering (DLS) and transmission electron microscopy (TEM) were used to study the aggregation states of copolymers in water solution. The radii of the copolymer micelles shrink as Ca²⁺ is introduced into the solutions. The crystallization behaviors of calcium carbonate controlled by copolymer 1 (PEG₁₁₂-b-PAA₈₆-b-PnBA₆₀) and copolymer 2 (PEG₁₁₂-b-PAA₄₀-b-PnBA₇₂) differing mainly in the length of PAA block were systematically studied. It was found that the crystallization products are composed of calcite and vaterite, and the ratio of vaterite to calcite increases with increasing the concentration of copolymer 1. For copolymer 2, however, only calcite is obtained at all the concentration range investigated in this work.     

Allyl functionalized telechelic linear polymer and star polymer via RAFT polymerization

Reversible addition-fragmentation chain transfer (RAFT) polymerization of styrene using bisallyl trithiocarbonate as a chain transfer agent (CTA) was studied. The polymerization exhibited first-order kinetics and the molecular weight increased linearly with increase of monomer conversion. Well defined allyl-functionalized telechelic polystyrene (PS), poly(tert-butyl acrylate) (PtBA) and corresponding triblock copolymers, polystyrene-b-poly(n-butyl acrylate)-b-polystyrene (PS-b-PnBA-b-PS) and poly(tert-butyl acrylate)-b-polystyrene-b-poly(tert-butyl acrylate) (PtBA-b-PS-b-PtBA) were prepared as characterized with GPC and NMR analysis. The allyl-end groups of the telechelic PS have been switched to 1,2-dibromopropyl groups quantitatively by bromine addition reaction, further substitution of the bromide with azide was also made. Furthermore, star PS with allyl-end-functionalized arms was synthesized by RAFT polymerization of divinyl benzene using allyl-functionalized PS as a macro-CTA via arm-first approach. Star polymer with a thiol-functionalized core was generated by aminolysis reaction of the star polymer and ethylenediamine. As a result, difunctionalized star polymer with allyl and thiol groups was obtained and was used as a stabilizer for the formation of gold nanoparticles.     

Comparison of thermomechanical properties of statistical, gradient and block copolymers of isobornyl acrylate and n-butyl acrylate with various acrylate homopolymers

Well-defined statistical, gradient and block copolymers consisting of isobornyl acrylate (IBA) and n-butyl acrylate (nBA) were synthesized via atom transfer radical polymerization (ATRP). To investigate structure-property correlation, copolymers were prepared with systematically varied molecular weights and compositions. Thermomechanical properties of synthesized materials were analyzed via differential scanning calorimetry (DSC), dynamic mechanical analyses (DMA) and small-angle X-ray scattering (SAXS). Glass transition temperature (T_g) of the resulting statistical poly(isobornyl acrylate-co-n-butyl acrylate) (P(IBA-co-nBA)) copolymers was tuned by changing the monomer feed. This way, it was possible to generate materials which can mimic thermal behavior of several homopolymers, such as poly(t-butyl acrylate) (PtBA), poly(methyl acrylate) (PMA), poly(ethyl acrylate) (PEA) and poly(n-propyl acrylate) (PPA). Although statistical copolymers had the same thermal properties as their homopolymer equivalents, DMA measurements revealed that they are much softer materials. While statistical copolymers showed a single T_g, block copolymers showed two T_gs and DSC thermogram for the gradient copolymer indicated a single, but very broad, glass transition. The mechanical properties of block and gradient copolymers were compared to the statistical copolymers with the same IBA/nBA composition.     

Grafting of end-functionalized poly(tert-butyl acrylate) to poly(ethylene-co-acrylic acid) film

Poly(tert-butyl acrylate) (PtBA) was grafted to the surface of poly(ethylene-co-acrylic acid) (EAA) film and the pendant groups of the tethered PtBA were modified to create chemically tailored surface modifying layers. The carboxylic acid groups in the copolymer film served as the grafting sites for the covalent tethering of end-functionalized PtBA. The progression of these reactions was monitored using attenuated total reflectance (ATR)-FTIR and X-ray photoelectron (XPS) spectroscopies along with static contact angle measurements. By controlling the reaction conditions, the chemical functionality of the grafted layer ranged from tert-butyl ester (EAA-g-PtBA) to carboxylic acid (EAA-g-PAA) and was demonstrated by corresponding changes in wettability. The choice of PtBA as the tethered polymer allows for the subsequent substitution of the tert-butyl ester groups. To demonstrate, a novel procedure was used to replace the tert-butyl ester with N,N-dimethylethylenediamine (DMEDA) to form EAA-g-PDMEDA. These reaction schemes can be used to create tunable surface-grafted layers with various pendant group chemistries.     

Self-assembling polyether-b-polymethacrylate graft copolymers loaded with indomethacin

The amphiphilic graft copolymers containing polyether-b-polymethacrylate side chains are proposed as carriers for a nonsteroidal anti-inflammatory drug, indomethacin (IMC). Two series of copolymers, poly((methyl methacrylate)-co-(poly(ethylene glycol methacrylate)-graft-poly((methacrylic acid)-co-(tert-butyl methacrylate)))) (P(MMA-co-(PEGMA-graft-P(MAA-co-tBMA)))) and poly((methyl methacrylate)-co-(poly(propylene glycol methacrylate)-graft-poly((methacrylic acid)-co-(tert-butyl methacrylate)))) (P(MMA-co-(PPGMA-graft-P(MAA-co-tBMA)))) were applied in the micellization process. The effects of grafting degree (5–15%), length of the graft polymethacrylic segments (29–186?units), composition (PEG vs. PPG), and content of acidic fraction (52–89%) were verified in the design of two different types of micelles (depending on polyether nature) with proper stability and controlled release of the drug. The methacrylic segment with MAA units resulted in negatively charged layer as it was indicated by measurements of zeta potential (from ?2 to ?44?mV) The sizes of particles were in the range of 160–225?nm. The type of polyether segment influenced on the content of the drug encapsulation (PEG 39% vs. PPG 93% at 48% of hydrophobic fraction). In vitro experiments demonstrated significantly larger IMC releasing at pH 7.4 than in acidic conditions. The lower drug release rates were monitored for copolymers with long side chains containing large content of acidic units, what enhanced particle stabilization and drug-polymer interactions. The drug release profiles were well fitted to the Higuchi model, suggesting diffusion mechanism. The results confirmed that the graft copolymers might be applied as the carriers releasing a various doses of drug with the rate, which can be adjusted by wider sort of structural parameters than is possible in linear amphiphilic copolymers.     

Nitroxide-mediated polymerization to form symmetrical ABA triblock copolymers from a bidirectional alkoxyamine initiator

Bidirectional alkoxyamine 2 was synthesized and used as the initiator in the polymerization of styrene (S), n-butyl acrylate (nBA), t-butyl acrylate (tBA), isoprene (I), and dimethylacrylamide (DMA). A variety of symmetrical ABA triblock copolymers were prepared, ranging in size from 5 to 59 kDa. Kinetics studies and gel permeation chromatography (GPC) confirmed the “living” nature of these polymerizations. Trifluoroacetic acid was used to convert the PtBA blocks of these polymers into poly(acrylic acid) (PAA) blocks, forming ABA amphiphilic triblock copolymers. AFM images of PAA-b-PnBA-b-PAA and PAA-b-PS-b-PAA triblock copolymers ionized by the addition of 2,2′-(ethylenedioxy)bis(ethylamine) show evidence of self-assembly.     

Synthesis of Amphiphilic Diblock Copolymers by DPE Method

Amphiphilic diblock copolymers, poly(methyl methacrylate)-b-poly(acrylic acid) (PMMA-b-PAA) and polystyrene-b-poly(acrylic acid) (PS-b-PAA), were prepared by 1,1-diphenylethene (DPE) method under mild conditions. Firstly, free radical polymerization of tert-butyl acrylate (tBA) was carried out with AIBN as initiator in the presence of DPE, giving a DPE-containing precursor, PtBA, with controlled molecular weight. Secondly, methyl methacrylate and styrene were polymerized in the presence of PtBA precursor, and PS-b-PtBA and PMMA-b-PtBA diblock copolymers with controlled molecular weights were obtained respectively. Finally, amphiphilic diblock copolymers, PMMA-b-PAA and PS-b-PAA, were prepared by hydrolysis of PS-b-PtBA and PMMA-b-PtBA. The formation of PS-b-PAA and PMMA-b-PAA was confirmed by ¹H NMR. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) were used to detect the self-assembly behavior of the amphiphilic diblock polymers in tetrahydrofuran (THF).     

Small-angle X-ray scattering and linear melt rheologyof poly(tert-butyl acrylate-g-styrene) graft copolymers

The morphology and rheological properties have been studied for poly(tert-butyl acrylate-g-styrene), PtBA-g-S, graft copolymers through the analysis of different samples that varied in the number of grafted repeat units. Small-angle X-ray scattering (SAXS) measurements confirmed phase separation in these samples, and showed the presence of disordered microdomains on those copolymers with a grafting number higher than 7. SAXS results have also shown a significant improvement of microdomain segregation with temperature manifesting considerable changes in both intensity, position and full-width half-maximum of the peak q*, which is attributed to the graft-like nature of these systems. The frequency dependence of the dynamic moduli revealed three relaxation mechanisms. The low-frequency (long time) relaxation was identified with the movement of the whole molecule, the relaxation at intermediate time is related to movement of the grafts, and the high-frequency relaxation is like that found in the transition zone of main chain of poly(tert-butyl acrylate), PtBA. The rheological measurements indicated that the introduction of a small amount of polystyrene, PS, grafts in the PtBA backbone is sufficient to modify mechanical behaviour at low frequencies. Comparison of the rheological properties of the graft copolymers with higher PS content showed that the observed changes in the viscoelastic behaviour under shear seems to be related to both the microphase separated microstructure and the number of grafts present in the copolymers.     

Amphiphilic cylindrical brushes with poly(acrylic acid) core and poly(n-butyl acrylate) shell and narrow length distribution

Core-shell cylindrical polymer brushes with poly(t-butyl acrylate)-b-poly(n-butyl acrylate) (PtBA-b-PnBA) diblock copolymer side chains were synthesized via ‘grafting from’ technique using atom transfer radical polymerization (ATRP). The formation of well-defined brushes was confirmed by GPC and ¹H NMR. Multi-angle light scattering (MALS) measurements on brushes with 240 arms show that the radius of gyration scales with the degree of polymerization of the side chains with an exponent of 0.57±0.05. The hydrolysis of the PtBA block of the side chains resulted amphiphilic cylindrical core-shell nanoparticles. In order to obtain a narrow length distribution of the brushes, the backbone, poly(2-hydroxyethyl methacrylate), was synthesized by anionic polymerization in addition to ATRP. The characteristic core-shell cylindrical structure of the brush was directly visualized on mica by scanning force microscopy (SFM). Brushes with 1500 block copolymer side chains and a length distribution of l_w/l_n=1.04 at a total length l_n=179 nm were obtained. By choosing the proper solvent in the dip-coating process on mica, the core and the shell can be visualized independently by SFM.     

Poly[(2-ethylhexyl acrylate)-ran-(tert-butyl acrylate)]-block-poly(2-cinnamoyloxyethyl acrylate) synthesis and properties

Poly[(2-ethylhexyl acrylate)-ran-(tert-butyl acrylate)]-block-poly(2-cinnamoyloxyethyl acrylate) or P(EXA-r-tBA)-PCEA was synthesized by atom transfer radical polymerization. Reactivity ratios of EXA and tBA for copolymerization were determined. The specific refractive index increments of six diblocks were measured as a function of their composition. The diblocks were thermally stable and formed micelles in an automobile engine oil. Such micelles may be useful as an anti-friction additive in lubricating oils.     

Synthesis of thermoresponsive poly(N-isopropylmethacrylamide) and poly(acrylic acid) block copolymers via post-functionalization of poly(N-methacryloxysuccinimide)

Polymers exhibiting a thermoresponsive, lower critical solution temperature (LCST) phase transition have proven to be useful for many applications as “smart” or “intelligent” materials. A series of poly(N-isopropylmethacrylamide) (PNIPMAM) polymer, poly(N-isopropylmethacrylamide)-b-poly(acrylic acid) (PNIPMAM-b-PAA) diblock, and poly(acrylic acid)-b-poly(N-isopropylmethacrylamide)-b-poly(acrylic acid) (PAA-b-PNIPMAM-b-AA) triblock copolymer samples were synthesized via ATRP. A facile post-functionalization route was developed that uses an activated ester functionality to convert poly(N-methacryloxysuccinimide) (PMASI) blocks to LCST capable polyacrylamide, while poly(t-butyl acrylate) (PtBA) blocks were converted to water-soluble poly(acrylic acid) (PAA). The post-functionalization was monitored via ¹H NMR and ATR-FTIR. The aqueous solution properties were explored and the PNIPMAM polymers were shown to have a LCST phase transition varying from 35 to 60 °C. The ability to synthesize block copolymers that are thermoresponsive and water-soluble will be of great benefit for broader applications in drug delivery, bioengineering, and nanotechnology.     

NMR and FT-IR studies of sulfonated styrene-based homopolymers and copolymers

A series of sodium poly(styrene sulfonate)-block-poly(4-tert-butylstyrene) (NaPSS-b-PtBS) copolymers and related homopolymers were characterized by Fourier transform infrared (FT-IR) and nuclear magnetic resonance (NMR) spectroscopy. The homopolymers included polystyrene (PS), poly(4-tert-butylstyrene) (PtBS), sodium poly(4-styrene sulfonate) (NaP4SS), sodium poly(styrene sulfonate) (NaPSS) with various sulfonation levels, and partially sulfonated PtBS (PtBSS). The structures of NaPSS and PtBSS were elucidated, and the effect of sulfonation level on the NaPSS FT-IR spectrum was studied. The characteristic peaks for NaPSS and PtBSS in FT-IR and NMR spectra were identified.     

Physical properties of poly(cyclohexyl methacrylate)-b-poly(iso-butyl acrylate)-b-poly(cyclohexyl methacrylate) triblock copolymers synthesized by controlled radical polymerization

The microphase segregation of different poly(cyclohexyl methacrylate)-b-poly(iso-butyl acrylate)-b-poly(cyclohexyl methacrylate), PCH-b-PiBA-b-PCH, triblock copolymers obtained by atom transfer radical polymerization has been evaluated by dynamic mechanical thermal analysis through location of the two relaxations ascribed to cooperative motions of each block. Additionally, other secondary relaxations have been found, whose characteristics are also dependent on molecular weight of outer and rigid segments. The length of these hard blocks influences significantly the stiffness and microhardness found in these triblock copolymers. These two mechanical parameters increase as molecular weight of poly(cyclohexyl methacrylate) does. The morphological aspects have been examined by small angle X-ray scattering and atomic force microscopy.     

Amphiphilic chitosan graft copolymer via combination of ROP, ATRP and click chemistry: Synthesis, self-assembly, thermosensitivity, fluorescence, and controlled drug release

Novel amphiphilic chitosan-g-poly(ε-caprolactone)-(g-poly(2-(2-methoxyethoxy)ethyl methacrylate)-co-oligo(ethylene glycol) methacrylate) (CS-g-PCL(-g-P(MEO₂MA-co-OEGMA))) copolymers with double side chains of PCL and P(MEO₂MA-co-OEGMA) were synthesized via combination of ring-opening polymerization (ROP), atom transfer radical polymerization (ATRP) and click chemistry. The molar ratio of PCL and P(MEO₂MA-co-OEGMA) was varied through variation of the feed ratio and the coupling efficiency of click chemistry is comparatively high. The graft copolymers can assemble into spherical micelles. The micelles show thermosensitive properties and the lower critical solution temperatures (LCSTs) were influenced by CS chains and the ratio of PCL and P(MEO₂MA-co-OEGMA) side chains. Moreover, the micelles can reversibly swell and shrink in response to the change of temperatures. Furthermore, the micelles present obvious fluorescence and the fluorescent intensity can be adjusted by altering the temperatures. The investigation of doxorubicin release from the micelles indicated that the release rate of the drug could be effectively controlled by altering the temperatures.     

Ordering and microdomain orientation in block copolymer films by thermal deprotection

Ordering and microdomain orientation for the films of symmetric polystyrene-b-poly(tert-butyl methacrylate)s (PS-b-PtBMAs) was investigated by in-situ grazing incidence small-angle X-ray scattering (GISAXS) and the electron microscopy. During thermal deprotection at higher temperature (200 °C), functional tert-butyl ester units in the PtBMA block component are integrated into inter- or intra-molecular anhydride linkages. It was observed that this process causes an increase in the Flory-Huggins interaction parameter (χ) between the two block components for disordered PS-b-PtBMA film, leading to a modulated nonequilibrium structure. Interestingly, for lamella-forming PS-b-PtBMA film, a significant chain stretching in lateral direction during thermal deprotection resulted in a characteristic strain-induced perpendicular orientation in the middle of the film confined between two parallel orientations of lamellar microdomains.     

Design of novel poly(methyl vinyl ether) containing AB and ABC block copolymers by the dual initiator strategy

A new set of block copolymers containing poly(methyl vinyl ether) (PMVE) on one hand and poly(tert-butyl acrylate), poly(acrylic acid), poly(methyl acrylate) or polystyrene on the other hand, have been prepared by the use of a novel dual initiator 2-bromo-(3,3-diethoxy-propyl)-2-methylpropanoate. The dual initiator has been applied in a sequential process to prepare well-defined block copolymers of poly(methyl vinyl ether) (PMVE) and hydrolizable poly(tert-butyl acrylate) (PtBA), poly(methyl acrylate) (PMA) or polystyrene (PS) by living cationic polymerization and atom transfer radical polymerization (ATRP), respectively. In a first step, the Br and acetal end groups of the dual initiator have been used to generate well-defined homopolymers by ATRP (resulting in polymers with remaining acetal function) and living cationic polymerization (PMVE with pendant Br end group), respectively. In a second step, those acetal functionalized polymers and PMVE-Br homopolymers have been used as macroinitiators for the preparation of PMVE-containing block copolymers. After hydrolysis of the tert-butyl groups in the PMVE-b-ptBA block copolymer, PMVE-b-poly(acrylic acid) (PMVE-b-PAA) is obtained. Chain extension of the AB diblock copolymers by ATRP gives rise to ABC triblock copolymers. The polymers have been characterized by MALDI-TOF, GPC and ¹H NMR.     

Preparation of block-brush PEG-b-P(NIPAM-g-DMAEMA) and its dual stimulus-response

Well-defined dually responsive block-brush copolymer of poly(ethylene glycol)-b-[poly(N-isopropylacrylamide)-g-poly(N,N-dimethylamino-ethylmethacrylate)], [PEG-b-P(NIPAM-g-PDMAEMA)] was successfully prepared by the combination of atom transfer radical polymerization (ATRP) and click chemistry based on azide-capped PDMAEMA and alkyne-pending PEG-b-PNIPAM copolymer. Azide-capped PDMAEMA was synthesized through ATRP of DMAEMA monomer using an azide-functionalized initiator of β-azidoethyl-2-bromoisobutyrate. Alkyne-pending PEG-b-PNIPAM copolymer was obtained through ATRP copolymerization of NIPAM with propargyl acrylate. The final block-brush copolymer was synthesized by the click reaction between these two polymer precursors. Because of characteristics of three different blocks, the copolymer exhibited dually thermo- and pH-responsive behavior. The responsive behaviors of block-brush copolymer were studied by laser light scattering, temperature-dependent turbidity measurement and micro differential scanning calorimetry. The phase transition temperature of block-brush copolymer increased with the decrease of pH value. At pH = 5.0, the copolymer displayed weak thermo-responsive behavior and might form uni-molecular micelles upon heating. At higher pH values, the block-brush copolymer aggregated intermolecularly into the micelles during the phase transition.