Isothermal crystallization kinetics and melting behavior of modified high‐density polyethylene/barium sulfate nanocomposites

The melting/crystallization behavior and isothermal crystallization kinetics of high‐density polyethylene (HDPE)/barium sulfate (BaSO₄) nanocomposites were studied with differential scanning calorimetry (DSC). The isothermal crystallization kinetics of the neat HDPE and nanocomposites was described with the Avrami equation. For neat HDPE and HDPE/BaSO₄ nanocomposites, the values of n ranges from 1.7 to 2.0. Values of the Avrami exponent indicated that crystallization nucleation of the nanocomposites is two‐dimensional diffusion‐controlled crystal growth. The multiple melting behaviors were found on DSC scan after isothermal crystallization process. The multiple endotherms could be attributed to melting of the recrystallized materials or the secondary lamellae caused during different crystallization processes. Adding the BaSO₄ nanoparticles increased the equilibrium melting temperature of HDPE in the nanocomposites. Surface free energy of HDPE chain folding for crystallization of HDPE/BaSO₄ nanocomposites was lower than that of neat HDPE, confirming the heterogeneous nucleation effect of BaSO₄. POLYM. COMPOS., 2011. © 2010 Society of Plastics Engineers     

Studies on nonisothermal crystallization of HDPE/POSS nanocomposites

The nonisothermal crystallization of HDPE/POSS nanocomposites (POSS content varying from 1 to 10 wt%) was studied using differential scanning calorimetry (DSC) technique. The Ozawa approach failed to describe the crystallization behaviour of nanocomposites, whereas the modified Avrami analysis could explain the behaviour of HDPE/POSS (90:10) nanocomposite only. The value of Avrami exponent n for HDPE/POSS (90:10) nanocomposite ranged from 2.5 to 2.9 and decreased with increasing cooling rate. It is postulated that the values of n close to 3 are caused by spherulitic crystal growth with heterogeneous nucleation while simultaneous occurrence of spherulitic and lamellar crystal growth with heterogeneous nucleation account for lower values of n at higher cooling rates. A novel kinetic model by Liu et al. was able to satisfactorily describe the crystallization behaviour of HDPE/POSS nanocomposites. Presence of POSS did not cause significant change in the activation energy for the transport of polymer segments to the growing crystal surface. POSS molecules exhibit nucleation activity only at 10 wt% loading in HDPE and are not effective nuclei at lower loadings.     

Crystallization behavior of poly(ε‐caprolactone)/layered double hydroxide nanocomposites

Poly(?‐caprolactone) (PCL)/layered double hydroxide (LDH) nanocomposites were prepared successfully via simple solution intercalation. The nonisothermal melt crystallization kinetics of neat PCL and its LDH nanocomposites was investigated with the Ozawa, Avrami, and combined Avrami–Ozawa methods. The Ozawa method failed to describe the crystallization kinetics of the studied systems. The Avrami method was found to be useful for describing the nonisothermal crystallization behavior, but the parameters in this method do not have explicit meaning for nonisothermal crystallization. The combined Avrami–Ozawa method explained the nonisothermal crystallization behavior of PCL and its LDH nanocomposites effectively. The kinetic results and polarized optical microscopy observations indicated that the addition of LDH could affect the mechanism of nucleation and growth of the PCL matrix. The Takhor model was used to analyze the activation energies of nonisothermal crystallization. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Characterization and non-isothermal crystallization behavior of biodegradable poly(ethylene sebacate)/SiO2 nanocomposites

Poly(ethylene sebacate) (PESeb) and PESeb/silica nanocomposites (PESeb/SiO₂) were prepared by in situ polymerization from the direct esterification of ethylene glycol with sebacic acid in the presence of proper amounts of silica nanoparticles. The non-isothermal crystallization behavior of PESeb/SiO₂ nanocomposites has been studied using different theoretical equations such as Avrami, Ozawa and combined Avrami and Ozawa equations. It is found that the addition of nanoparticles of SiO₂ influenced the mechanism of nucleation and the growth of PESeb crystallites. Also, the nanocomposites show a higher Avrami value than the neat PESeb, implying a more complex crystallization configuration. Moreover, the combined Avrami and Ozawa equation can successfully describe the crystallization model under the non-isothermal crystallization. The crystallization activation energies, E _a, calculated from “Kissinger’s equation” have shown that the synthesized PESeb/SiO₂ nanocomposites have lower energy than the neat PESeb, reflecting the much lower energy barrier for the rapid heterogeneous nucleation.     

Isothermal and nonisothermal crystallization kinetics of nylon-11

Analysis of the isothermal, and nonisothermal crystallization kinetics of Nylon-11 is carried out using differential scanning calorimetry. The Avrami equation and that modified by Jeziorny can describe the primary stage of isothermal and nonisothermal crystallization of Nylon-11. In the isothermal crystallization process, the mechanism of spherulitic nucleation and growth are discussed; the lateral and folding surface free energies determined from the Lauritzen–Hoffman equation are ς = 10.68 erg/cm² and ς_e = 110.62 erg/cm²; and the work of chain folding q = 7.61 Kcal/mol. In the nonisothermal crystallization process, Ozawa analysis failed to describe the crystallization behavior of Nylon-11. Combining the Avrami and Ozawa equations, we obtain a new and convenient method to analyze the nonisothermal crystallization kinetics of Nylon-11; in the meantime, the activation energies are determined to be −394.56 and 328.37 KJ/mol in isothermal and nonisothermal crystallization process from the Arrhonius form and the Kissinger method. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 70: 2371–2380, 1998     

Crystallization behavior of polyamide 11/multiwalled carbon nanotube composites

Differential scanning calorimetry (DSC) was used to investigate the isothermal and nonisothermal crystallization kinetics of polyamide11 (PA11)/multiwalled carbon nanotube (MWNTs) composites. The Avrami equation was used for describing the isothermal crystallization behavior of neat PA11 and its nanocomposites. For nonisothermal studies, the Avrami model, the Ozawa model, and the method combining the Avrami and Ozawa theories were employed. It was found that the Avrami exponent n decreased with the addition of MWNTs during the isothermal crystallization, indicating that the MWNTs accelerated the crystallization process as nucleating agent. The kinetic analysis of nonisothermal crystallization process showed that the presence of carbon nanotubes hindered the mobility of polymer chain segments and dominated the nonisothermal crystallization process. The MWNTs played two competing roles on the crystallization of PA11 nanocomposites: on the one hand, the MWNTs serve as heterogeneous nucleating agent promoting the crystallization process of PA11; on the other hand, the MWNTs hinder the mobility of the polymer chains thus retarding the crystal growth process of PA11. The activation energies of PA11/MWNTs composites for the isothermal and nonisothermal crystallization are lower than neat PA11. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Effect of nano-nucleating agent addition on the isothermal and nonisothermal crystallization kinetics of isotactic polypropylene

Using differential scanning calorimetry (DSC) technique, a comparative study has been made of the isothermal and nonisothermal crystallization kinetics of nonnucleated isotactic polypropylene (iPP) and of nucleated iPP with 0.5 wt% of single-walled carbon nanotubes (SWCNTs) as a nucleating agent. The Avrami exponents (n) of iPP and nucleated iPP are close to 3.0 for isothermal crystallization. These results indicate that the addition of nucleating agents did not change the crystallization growth patterns of the neat polymer and that crystal growth was heterogeneous three-dimensional spherulitic. The results show that the addition of SWCNTs can shorten the crystallization half-time (t _1/2) and increase the crystallization rate of iPP. In the nonisothermal crystallization process, the Ozawa model failed to describe the crystallization behavior of nucleated iPP. The Cazé–Chuah model successfully described the nonisothermal crystallization process of iPP and its nanocomposite. A kinetic treatment based on the Ziabicki theory is presented to describe the kinetic crystallizability, in order to characterize the nonisothermal crystallization kinetics of iPP and nucleated iPP. Polarized light microscopy (PLM) experiments reveal that SWCNTs served as nucleating sites, resulting in a decrease of the spherulite size.     

Nonisothermal crystallization behavior of melt‐intercalated polyethylene‐clay nanocomposites

The influence of nanoclay particles on the nonisothermal crystallization behavior of intercalated polyethylene (PE) prepared by melt‐compounding was investigated. It is observed that the crystallization peak temperature (T_p) of PE/clay nanocomposites is slightly but consistently higher than the neat PE at various cooling rates. The half‐time (t_0.5) for crystallization decreased with increase in clay content, implying the nucleating role of nanoclay particles. The nonisothermal crystallization data are analyzed using the approach of Avrami (Polymer 1971, 12, 150), Ozawa (Polym Eng Sci 1997, 37, 443), and Mo and coworkers (J Res Natl Bur Stand 1956, 57, 217), and the validity of the different kinetic models to the nonisothermal crystallization process of PE/clay nanocomposites is discussed. The approach developed by Mo and coworkers successfully explains the nonisothermal crystallization behavior of PE and PE/clay nanocomposites. The activation energy for nonisothermal crystallization of neat PE and PE/clay nanocomposites is determined using the Kissinger (J Res Natl Bur Stand 1956, 57, 217) method. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3809–3818, 2006     

Nonisothermal crystallization kinetics of poly(butylene terephthalate)/multiwalled carbon nanotubes nanocomposites prepared by in situ polymerization

Poly(butylene terephthalate)/multiwalled carbon nanotubes (PBT/MWNT) nanocomposites were prepared by in situ ring‐opening polymerization of cyclic butylene terephthalate oligomers (CBT). The nonisothermal crystallization behavior of the neat PBT and the PBT/MWNT nanocomposites was analyzed quantitatively. The results reveal that the combined Avrami/Ozawa equation exhibits great advantages in describing the nonisothermal crystallization of PBT and its nanocomposites. The presence of MWNTs has the nucleation effect promoting crystallization rate for the nanocomposites, and the maximum one is observed in the nanocomposite having 0.75 wt % MWNT content. On the other hand, the addition of MWNTs has the impeding effect reducing the chain mobility and retarding crystallization, which is confirmed by the crystallization activation energies. However, the nucleation effect of MWNTs plays the dominant role in the crystallization of PBT/MWNT nanocomposites, in other words, the incorporation of MWNTs is increasing the crystallization rate of the nanocomposites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40849.     

Nonisothermal crystallization behavior of highly exfoliated polypropylene/clay nanocomposites prepared by in situ polymerization

Polypropylene/clay nanocomposites (PPCNs) were prepared via an in situ polymerization method with a Ziegler–Natta/clay compound catalyst in which the MgCl₂/TiCl₄ catalyst was embedded in the clay galleries. The wide‐angle X‐ray diffraction and transmission electron microscopy results showed that the clay particles were highly exfoliated in the polypropylene (PP) matrix. The nonisothermal crystallization kinetics of these PPCNs were investigated by differential scanning calorimetry at various cooling rates. The nucleation activity were calculated by Dobreva's method to demonstrate that the highly dispersed silicate layers acted as effective nucleating agents. The Avrami, Jeziorny, Ozawa, and Mo methods were used to describe the nonisothermal crystallization behavior of the PP and PPCNs. Various parameters of nonisothermal crystallization, such as the crystallization half‐time, crystallization rate constant, and the kinetic parameter F(t), reflected that the highly exfoliated silicate layers significantly accelerated the crystallization process because of its outstanding nucleation effect. The activation energy values of the PP and PPCNs determined by the Kissinger method increased with the addition of the nanosilicate layers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Nonisothermal crystallization behavior and mechanical properties of poly(butylene succinate)/silica nanocomposites

Silica nanoparticles and poly(butylene succinate) (PBS) nanocomposites were prepared by a melt‐blending process. The influence of silica nanoparticles on the nonisothermal crystallization behavior, crystal structure, and mechanical properties of the PBS/silica nanocomposites was investigated. The crystallization peak temperature of the PBS/silica nanocomposites was higher than that of neat PBS at various cooling rates. The half‐time of crystallization decreased with increasing silica loading; this indicated the nucleating role of silica nanoparticles. The nonisothermal crystallization data were analyzed by the Ozawa, Avrami, and Mo methods. The validity of kinetics models on the nonisothermal crystallization process of the PBS/silica nanocomposites is discussed. The approach developed by Mo successfully described the nonisothermal crystallization process of the PBS and its nanocomposites. A study of the nucleation activity revealed that the silica nanoparticles had a good nucleation effect on PBS. The crystallization activation energy calculated by Kissinger's method increased with increasing silica content. The modulus and yield strength were enhanced with the addition of silica nanoparticles into the PBS matrix. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Isothermal and nonisothermal crystallization kinetics of a semicrystalline copolyterephthalamide based on poly(decamethylene terephthalamide)

The isothermal and nonisothermal crystallization kinetics of a semicrystalline copolyterephthalamide based on poly(decamethylene terephthalamide) (PA‐10T) was studied by differential scanning calorimetry. Several kinetic analyses were used to describe the crystallization process. The commonly used Avrami equation and the one modified by Jeziorny were used, respectively, to describe the primary stage of isothermal and nonisothermal crystallization. The Avrami exponent n was evaluated to be in the range of 2.36–2.67 for isothermal crystallization, and of 3.05–5.34 for nonisothermal crystallization. The Ozawa analysis failed to describe the nonisothermal crystallization behavior, whereas the Mo–Liu equation, a combination equation of Avrami and Ozawa formulas, successfully described the nonisothermal crystallization kinetics. In addition, the value of crystallization rate coefficient under nonisothermal crystallization conditions was calculated. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 819–826, 2004     

Isothermal and nonisothermal crystallization kinetics of fully bio‐based polyamides

We studied the crystallization behaviors of bio‐based BDIS polyamides synthesized from the following biomass monomers: 1,4‐butanediamine (BD), 1,10‐decanediamine (DD), itaconic acid (IA), and sebacic acid (SA). Isothermal crystallization, melting behavior, and nonisothermal crystallization of BDIS polyamides were investigated by differential scanning calorimetry (DSC). The Avrami equation was used to describe the isothermal crystallization of BDIS polyamides. The modified Avrami equation, the Ozawa equation, the modified Ozawa equation, and an equation combining the Avrami and Ozawa equations were used to describe the nonisothermal crystallization. The equilibrium melting point temperature of BDIS polyamide was determined to be 163.0°C. The Avrami exponent n was found to be in the range of 2.21–2.79 for isothermal crystallization and 4.10–5.52 for nonisothermal crystallization. POLYM. ENG. SCI., 56:829–836, 2016. © 2016 Society of Plastics Engineers     

PE/PE‐g‐MAH/Org‐MMT nanocomposites. II. Nonisothermal crystallization kinetics

The nonisothermal crystallization kinetics of high‐density polyethylene (HDPE) and polyethylene (PE)/PE‐grafted maleic anhydride (PE‐g‐MAH)/organic‐montmorillonite (Org‐MMT) nanocomposite were investigated by differential scanning calorimetry (DSC) at various cooling rates. Avrami analysis modified by Jeziorny, Ozawa analysis, and a method developed by Liu well described the nonisothermal crystallization process of these samples. The difference in the exponent n, m, and a between HDPE and the nanocomposite indicated that nucleation mechanism and dimension of spherulite growth of the nanocomposite were different from that of HDPE to some extent. The values of half‐time (t_1/2), K(T), and F(T) showed that the crystallization rate increased with the increase of cooling rates for HDPE and composite, but the crystallization rate of composite was faster than that of HDPE at a given cooling rate. Moreover, the method proposed by Kissinger was used to evaluate the activation energy of the mentioned samples. It was 223.7 kJ/mol for composite, which was much smaller than that for HDPE (304.6 kJ/mol). Overall, the results indicated that the addition of Org‐MMT and PE‐g‐MAH could accelerate the overall nonisothermal crystallization process of PE. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3054–3059, 2004     

Nonisothermal and isothermal crystallization kinetics of nylon‐12

The isothermal and nonisothermal crystallization behavior of Nylon 12 was investigated using differential scanning calorimetry (DSC). An Avrami analysis was used to study the isothermal crystallization kinetics of Nylon 12, the Avrami exponent (n) determined and its relevance to crystal growth discussed and an activation energy for the process evaluated using an Arrhenius type expression. The Lauritzen and Hoffman analysis was used to examine the spherulitic growth process of the primary crystallization stage of Nylon 12. The surface‐free energy and work of chain folding were calculated using a procedure reported by Hoffmann and the work of chain folding per molecular fold (σ) and chain stiffness of Nylon 12 (q) was calculated and compared to values reported for Nylons 6,6 and 11. The Jeziorny modification of the Avrami analysis, Cazé and Chuah average Avrami parameter methods and Ozawa equation were used in an attempt to model the nonisothermal crystallization kinetics of Nylon 12. A combined Avrami and Ozawa treatment, described by Liu, was used to more accurately model the nonisothermal crystallization kinetics of Nylon 12. The activation energy for nonisothermal crystallization processes was determined using the Kissinger method for Nylon 12 and compared with values reported previously for Nylon 6,6 and Nylon 11. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Nonisothermal crystallization behavior and crystals morphology of poly(trimethylene terephthalate)/nano‐calcium carbonate composites

Nonisothermal crystallization behavior and crystal morphology of poly(trimethylene terephthalate) (PTT) composites filled with modified nano‐calcium carbonate (CaCO₃) had been investigated by using differential scanning calorimetry and polarized optical microscopy. The modified Avrami equation and Ozawa theory were used to investigate the nonisothermal crystallization, respectively. The particles of nano‐CaCO₃, acting as a nucleation agent in composites, accelerated the crystallization rate by decreasing the half‐time of crystallization or increasing the parameters of Z_c and K(T). Moreover, the nano‐composite with 2 wt% nano‐CaCO₃ exhibited the highest crystallization rate. The Avrami and the Ozawa exponents, n and m of the nano‐composites, were higher than those of neat PTT, suggesting more complicated interaction between molecular chains and the nanoparticles that cause the changes of the nucleation mode and the crystal growth dimension. The effective activation energy calculated from the Friedman formula was reduced as nano‐CaCO₃ content increased, suggesting that the nano‐CaCO₃ made the molecular chains of PTT easier to crystallize during the nonisothermal crystallization process. The optical micrographs showed that much smaller or less perfect crystals were formed in composites because of the presence of the nano‐CaCO₃ particles. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

Crystallization kinetics of poly(L‐lactide)/carbonated hydroxyapatite nanocomposite microspheres

Microspheres consisting of carbonated hydroxyapatite (CHAp) nanoparticles and poly(L ‐lactide) (PLLA) have been fabricated for use in the construction of osetoconductive bone tissue engineering scaffolds by selective laser sintering (SLS). In SLS, PLLA polymer melts and crystallizes. It is therefore necessary to study the crystallization kinetics of PLLA/CHAp nanocomposites. The effects of 10 wt% CHAp nanoparticles on the isothermal and nonisothermal crystallization behavior of PLLA matrix were studied, using neat PLLA for comparisons. The Avrami equation was successfully applied for the analysis of isothermal crystallization kinetics. Using the Lauritzen‐Hoffman theory, the transition temperature from crystallization Regime II to Regime III was found to be around 120°C for both neat PLLA and PLLA/CHAp nanocomposite. The combined Avrami‐Ozawa equation was used to analyze the nonisothermal crystallization process, and it was found that the Ozawa exponent was equal to the Avrami exponent for neat PLLA and PLLA/CHAp nanocomposite, respectively. The effective activation energy as a function of the relative crystallinity and temperature for neat PLLA and PLLA/CHAp nanocomposite under the nonisothermal crystallization condition was obtained by using the Friedman differential isoconversion method. The Lauritzen‐Hoffman parameters were also determined from the nonisothermal crystallization data by using the Vyazovkin‐Sbirrazzuoli equation. CHAp nanoparticles in the composite acted as an efficient nucleating agent, enhancing the nucleation rate but at the same time reducing the spherulite growth rate. This investigation has provided significant insights into the crystallization behavior of PLLA/CHAp nanocomposites, and the results obtained are very useful for making good quality PLLA/CHAp scaffolds through SLS. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Nonisothermal crystallization kinetics of PLA/nanosized YVO4 composites as a novel nucleating agent

The influence of nanosized YVO₄ particles as a novel and efficient nucleating agent on the nonisothermal crystallization behaviors of poly(lactic acid) (PLA) was studied. A modified Avrami model was utilized to describe the nonisothermal crystallization kinetics of pure PLA and PLA nanocomposites. The differential isoconversional Friedmann formula was employed to calculate the effective activation energies (E_X(t) ) of nonisothermal crystallization from the glass state. The results showed that modified Avrami methods describe the nonisothermal crystallization kinetics of pure PLA and PLA nanocomposites well. The crystallization rate of PLA/1 mass% YVO₄ was faster than that of pure PLA sample by factor 5 × 10³ at a heating rate of 1 K min⁻¹. While the values of Lauritzen–Hoffman parameters (K_g and U*) of the PLA/YVO₄ nanocomposites were lower than those of pure PLA, indicating the nucleation efficiency of nanosized YVO₄ particles for PLA. Scanning electron microscopy images reflect the uniform dispersion of 1 mass% YVO₄ in PLA matrix. Thermogravimetric analysis results revealed that the thermal degradation parameters are slightly lowered by 7 °C on increasing the mass percentage of YVO₄ in the PLA nanocomposites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48340.     

Calorimetric and rheokinetic analyses merged to capture crystallization kinetics in polyamide/clay nanocomposites: Revisiting predictability of models

Crystallization kinetics of polymer/clay systems was the subject of numerous investigations, but still there are some ambiguities in understanding thermal behavior of such systems under isothermal and nonisothermal circumstances. In this work, isothermal rheokinetic and nonisothermal calorimetric analyses are combined to demonstrate crystallization kinetics of polyamide6/nanoclay (PA6/NC) nanocomposites. As the main outcome of this work, we detected different regimes of crystallization and compared them by both isothermal dynamic rheometry and nonisothermal differential scanning calorimetry (DSC), which has not been simultaneously addressed yet. A novel analysis, somehow different from the common ones, is used to convert the storage modulus data to crystallinity values leading to more reasonable Avrami parameters in isothermal crystallization. It was found based on isothermal rheokinetic studies that increase of NC content and shear rate are responsible for erratic behavior of Avrami exponent and crystallization rates. Optimistically, however, isothermal crystallization by rheometer was confirmed by DSC. Nonisothermal calorimetric evaluations suggested an accelerated crystallization of PA6 upon increasing NC content and cooling rate. The crystallization behavior was quantified applying Ozawa (r² between 0.070 and 0.975), and combinatorial Avrami–Ozawa (r² between 0.984 and 0.998) models, where the latter appeared more appropriate for demonstration of nonisothermal crystallization of PA6/NC nanocomposites. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46364.