Decoration of graphene oxide nanosheets with amino silane‐functionalized silica nanoparticles for enhancing thermal and mechanical properties of polypropylene nanocomposites

Graphene oxide nanosheets were decorated by amino‐silane modified silica nanoparticles. An electrostatic interaction between the negative charge of oxygen‐containing groups of graphene oxide and the positive charge of amino‐silane functional groups on the surface of silica nanoparticles plays a major role for the interfacial interaction of these two materials. The hybrid material was then used as a reinforcement in polypropylene (PP) composite. The increasing tensile strength at yield, tensile, and flexural modulus of the PP composite at a graphene oxide‐ amino‐silane silica loading content of 20 wt % are about 24.81, 55.52, and 30.35%, respectively, when compared with those of PP. It is believed that GO assists the dispersion of SiO₂ nanoparticles to the polymer matrix because of its unique structure having hydrophilicity due to its oxygen functional groups and hydrophobicity owing to its backbone graphitic carbon structure. This hybrid material may also be used as the reinforcement in other polyolefins. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44382.     

Antimicrobial properties of bio‐inspired poly(4‐vinyl‐2‐pyridone) and its N‐alkylated cationic derivatives

Developing new antimicrobial polymers and designing new antimicrobial materials are important research areas for overcoming bacterial resistance. In the present study a new polymer, poly(4‐vinyl‐2‐pyridone), having bioactive structure analogous to that of naturally occurring heterocyclic compounds, was synthesized from 4‐vinylpyridine following a simple protocol. To augment the antibacterial properties of the synthesized polymer, N ‐alkylation of the heterocyclic pyridone moieties was achieved with ethylene chlorohydrin (2‐chloroethanol) to generate choline analogous structure. Also, its N ‐butylated analogue was synthesized as a reference compound to study structure–activity relationship. Structures of the polymers were confirmed using various characterization techniques. Antimicrobial efficacy of the polymers was determined using the minimum inhibitory concentration method in parallel experiments. The test microorganisms used were a Gram (+) bacterium (Staphylococcus epidermidis ), Gram (?) bacteria (Salmonella typhi , Pseudomonas aeruginosa and Escherichia coli ) and a fungus (Candida albicans ). Both the polymer derivatives are far more effective antimicrobial agents than the pristine polymer. Trends in the antimicrobial efficacy of these polymers correlate with their zeta potential values. © 2016 Society of Chemical Industry     

Epoxy/p‐phenylenediamine functionalized graphene oxide composites and evaluation of their fracture toughness and tensile properties

In an attempt to enhance the mechanical properties of epoxy/graphene‐based composites, the interface was engineered through the functionalization of graphene oxide (GO) sheets with p‐phenylenediamine; this resulted in p‐phenylenediamine functionalized graphene oxide (GO–pPDA). The morphology and chemical structure of the GO–pPDA sheets were studied by spectroscopic methods, thermal analysis, X‐ray diffraction, and transmission electron microscopy. The characterization results show the successful covalent functionalization of GO sheets through the formation of amide bonds. In addition, p‐phenylenediamine were polymerized on graphene sheets to form crystalline nanospheres; this resulted in a GO/poly(p‐phenylenediamine) hybrid. The mechanical properties of the epoxy/GO–pPDA composite were assessed. Although the Young's modulus showed improvement, more significant improvements were observed in the strength, fracture strain, and plane‐strain fracture toughness. These improvements were attributed to the unique microstructure and strong interface between GO–pPDA and the epoxy matrix. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43821.     

Poly(ε‐caprolactone) composite scaffolds loaded with gentamicin‐containing β‐tricalcium phosphate/gelatin microspheres for bone tissue engineering applications

In this study, novel poly(ε‐caprolactone) (PCL) composite scaffolds were prepared for bone tissue engineering applications, where gentamicin‐loaded β‐tricalcium phosphate (β‐TCP)/gelatin microspheres were added to PCL. The effects of the amount of β‐TCP/gelatin microspheres added to the PCL scaffold on various properties, such as the gentamicin release rate, biodegradability, morphology, mechanical strength, and pore size distribution, were investigated. A higher amount of filler caused a reduction in the mechanical properties and an increase in the pore size and led to a faster release of gentamicin. Human osteosarcoma cells (Saos‐2) were seeded on the prepared composite scaffolds, and the viability of cells having alkaline phosphatase (ALP) activity was observed for all of the scaffolds after 3 weeks of incubation. Cell proliferation and differentiation enhanced the mechanical strength of the scaffolds. Promising results were obtained for the development of bone cells on the prepared biocompatible, biodegradable, and antimicrobial composite scaffolds. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40110.     

Mechanical and piezo‐resistive properties of styrene–butadiene–styrene copolymer covalently modified with graphene/styrene–butadiene–styrene composites

As novel piezoelectric materials, carbon‐reinforced polymer composites exhibit excellent piezoelectric properties and flexibility. In this study, we used a styrene–butadiene–styrene triblock copolymer covalently grafted with graphene (SBS‐g‐RGO) to prepare SBS‐g‐RGO/styrene–butadiene–styrene (SBS) composites to enhance the organic solubility of graphene sheets and its dispersion in composites. Once exfoliated from natural graphite, graphene oxide was chemically modified with 1,6‐hexanediamine to functionalize with amino groups (GO–NH₂), and this was followed by reduction with hydrazine [amine‐functionalized graphene oxide (RGO–NH₂)]. SBS‐g‐RGO was finally obtained by the reaction of RGO–NH₂ and maleic anhydride grafted SBS. After that, X‐ray diffraction, X‐ray photoelectron spectroscopy, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, and other methods were applied to characterize SBS‐g‐RGO. The results indicate that the SBS molecules were grafted onto the graphene sheets by covalent bonds, and SBS‐g‐RGO was dispersed well. In addition, the mechanical and electrical conductivity properties of the SBS‐g‐RGO/SBS composites showed significant improvements because of the excellent interfacial interactions and homogeneous dispersion of SBS‐g‐RGO in SBS. Moreover, the composites exhibited remarkable piezo resistivity under vertical compression and great repeatability after 10 compression cycles; thus, the composites have the potential to be applied in sensor production. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46568.     

Physicochemical and antibacterial properties of chitosan‐polyvinylpyrrolidone films containing self‐organized graphene oxide nanolayers

Chitosan films have a great potential to be used for wound dressing and food‐packaging applications if their physicochemical properties including water vapor permeability, optical transparency, and hydrophilicity are tailored to practical demands. To address these points, in this study, chitosan (CS) was combined with polyvinylpyrrolidone (PVP) and graphene oxide (GO) nanosheets (with a thickness of ～1 nm and lateral dimensions of few micrometers). Flexible and transparent films with a high antibacterial capacity were prepared by solvent casting methods. By controlling the evaporation rate of the utilized solvent (1 vol % acidic acid in deionized water), self‐organization of GO in the polymer matrix was observed. The addition of PVP to the CS/GO films significantly increased their water vapor permeability and optical transmittance. A blue shift in the optical absorption edge was also noticed. Thermal analysis coupled with Fourier transform infrared spectroscopy suggested that the superior thermal stability of the nanocomposite films was due to the formation of hydrogen bonds between the functional groups of chitosan with those of the graphene oxide. An improved bactericidal capacity of the nanocomposite films against gram‐positive Staphylococcus aureus and gram‐negative Escherichia coli bacteria was also observed. Highly flexible, transparent (opacity of 6.95), and antimicrobial CS/25 vol % PVP/1 wt % GO films were prepared. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43194.     

Scalable fabrication of high-performance graphene/polyamide 66 nanocomposites with controllable surface chemistry by melt compounding

Scalable and ease fabrication of high-performance graphene reinforced polyamide 66 (PA66) nanocomposites by melt-mixing were achieved by selecting ideal graphene reinforcement having high C/O ratio. In this study, single-layer amine functionalized reduced graphene oxide and multi-layer thermally exfoliated graphene oxide (TEGO) were used to investigate the influence of surface chemistry and dispersion state on crystallization behaviors, mechanical, and thermal properties of graphene reinforced PA66 nanocomposites. Both types of graphenes acted as nucleating agent but TEGO showed the better performance due to its intercalated structure formation mechanism and efficient viscous flow during melting. Mechanical results indicated that 0.5 wt% TEGO based PA66 nanocomposite showed the highest tensile properties by increasing tensile modulus and tensile strength up to 45% and 16.1%, respectively. In addition, TEGO reinforced nanocomposites showed more stable viscoelastic behavior by reaching a plateau at high temperatures and restraining long-range motion of polymer chains.     

Co‐Culture of Keratinocyte‐Staphylococcus aureus on Cu‐Ag‐Zn/CuO and Cu‐Ag‐W Nanoparticle Loaded Bacterial Cellulose:PMMA Bandages

Pressurized gyration and its sister processes are novel methods to produce polymeric fibers. Potential applications for such fibers include wound dressings, tissue engineering scaffolds, and filters. This study reports on a pressurized gyration technique that employs pressured N₂ gas to prepare biocompatible wound dressing bandages from bacterial cellulose and poly (methylmethacrylate) polymer blended with alloyed antimicrobial nanoparticles. Resulting bandages are manufactured with high product yield and characterized for their chemical, physical, and mechanical properties. Increased density in solutions with additional antimicrobial nanoparticles results in increased fiber diameters. Also, addition of antimicrobial nanoparticles enhances ultimate tensile strength and Young's modulus of the bandages. Typical molecular bonding in the bandages is confirmed by Fourier‐transform infrared spectroscopy, with peaks that have higher intensity and narrowing points being caused by additional antimicrobial nanoparticles. More so, the cellular response to the bandages and the accompanying antimicrobial activity are studied in detail by in vitro co‐culture of Staphylococcus aureus and keratinocytes. Antimicrobial nanoparticle‐loaded bandage samples show increased cell viability and bacteria inhibition during co‐culture and are found to have a promising future as epidermal wound dressing materials.     

Synergetic effect of graphene sheet and three‐dimensional crumpled graphene on the performance of dye‐sensitized solar cells

Herein, an improved structure of the dye‐sensitized solar cell (DSSC) is demonstrated which is composed of surface modified fluorine‐doped tin oxide (FTO) glass with graphene (GR) sheets and TiO₂ films incorporated with three‐dimensional crumped graphene (3‐D CGR)/GR sheets. The morphologies of the as‐prepared GR sheets on FTO glasses and 3‐D CGR/GR sheets/TiO₂ films were observed by field‐emission scanning electron microscopy. Light harvesting and charge recombination kinetics were investigated with a solar simulator and electrochemical impedance spectroscopy analysis. In addition to the reduced charge resistance by the GR modified FTO, the enhanced dye loading capability of the 3‐D CGR, and the rapid charge transport by the 2‐D GR sheets, the power conversion efficiency was 7.2%, which was an increase of 56% compared to a “conventional” structured DSSC. © 2015 American Institute of Chemical Engineers AIChE J, 62: 574–579, 2016     

Influence of structure of amines on the properties of amines‐modified reduced graphene oxide/polyimide composites

Graphene oxide (GO), as an important precursor of graphene, was functionalized using alkyl‐amines with different structure and then reduced to prepare reduced amines grafted graphene oxide (RAGOs) by N₂H₄ · H₂O. The successful chemical amidation reaction between amine groups of alkyl‐amines and carboxyl groups of GO was confirmed by Fourier transform infrared (FTIR), X‐ray photoelectron spectroscopy (XPS), and thermal gravimetric analysis (TGA). Then RAGOs/polyimide nanocomposites were prepared via in situ polymerization and thermal curing process with different loadings of RAGOs. The modification of amine chains lead to homogenous dispersion of RAGOs in the composites and it formed strong interfacial adhesion between RAGOs and the polymer matrix. The mechanical and electrical properties of polyimide (PI) were significantly improved by incorporation of a small amount of RAGOs, the influence of structure of amines grafted on RAGOs on the enhancement effects of composites was discussed. The research results indicated that the proper structure of amine could effectively enhance the properties of composites. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43820.     

Fabrication and Physical Properties of Poly(ε‐Caprolactone)/Modified Graphene Nanocomposite

A chemical strategy is attempted to modify graphene for its facilitated dispersion in poly(ε‐caprolactone) (PCL) matrix. Herein, graphite oxide is subjected to sequential treatment with phenyl isocyanate and vitamin C (VC) to yield graphene nanosheets (iG‐VC). It is noteworthy that following the reduction treatment, iG‐VC graphene sheets exfoliate within the PCL matrix and show appreciable interfacial compatibility with PCL matrix in organic solvent by virtue of improved polarity from isocyanate treatment. The tensile yield strength and Young's modulus of the PCL/iG‐VC composite exhibit pronounced enhancement as compared to neat PCL, despite of mere composition of graphene sheets. The tensile yield stress of composite is increased notably to reach 18.6 MPa at 3 wt% graphene sheets as compared to neat PCL. Likewise, Young's modulus of composite is observed to increase from 370 to 470 MPa at 5 wt% graphene sheets. Moreover, the crystallization temperature (T _c) and crystallinity of PCL increase significantly upon incorporation of small amount of iG‐VC. Ultimately, functional role of iG‐VC graphene sheets is demonstrated in enhancing electrical conductivity of PCL‐based nanocomposites. The plausible mechanisms are also proposed to explain the increased T _c, improved mechanical property, and improved electrical conductivity of PCL/iG‐VC composite.

     

Properties of carbon fiber and composites modified with different‐sized graphene oxide sheets

The graphene oxide (GO) sheets with different size distributions were effectively separated by a centrifugation method. The exfoliated single‐layer structure and the size of GO sheets were verified by scanning electron microscopy (SEM), atomic force microscope (AFM), and metallurgical microscope, respectively. Two different‐sized GO sheets water suspensions were obtained, which were then directly dispersed in carbon fiber (CF) sizing agent, respectively. The influences of the different‐sized GO sheets on CF and CF composites were explored. The workability in later process of CF and CF surface morphology were characterized by abrasion resistance, fluffs and breakage, stiffness, and SEM. SEM micrographs demonstrated that a nonuniform distribution of the large‐sized GO was lapped on CF whereas the small‐sized GO was uniformly leaned on CF. The interlaminar shear strength of the small‐sized GO/CF reinforced composite could reaches the maximum value. It indicated that the interfacial region between CF and polymer matrix could be enhanced by adjusting the size of GO sheets. POLYM. COMPOS., 37:2719–2726, 2016. © 2015 Society of Plastics Engineers     

On the use of ball milling to develop poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)‐graphene nanocomposites (II)—Mechanical,barrier, and electrical properties

In this work, poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) nanocomposites containing functionalized graphene sheets (FGS) were prepared by means of high‐energy ball milling. The crystalline structure, oxygen barrier, mechanical and electrical properties, and biodegradability of the developed nanocomposites were analyzed and correlated with the amount of FGS incorporated and with their morphology, which was reported in a previous study. Addition of FGS into the PHBV matrix did not affect the crystal morphology of the material but led to somewhat enhanced crystallinity. The good dispersion and distribution of the nanofiller within the polymeric matrix, revealed in the first part of this study, was thought to be crucial for the mechanical reinforcing effect of FGS and also resulted in enhanced gas barrier properties at high relative humidity. Additionally, the conducting behavior of the nanocomposites, as interpreted by the percolation theory, displayed a very low percolation threshold set at ～0.3 vol % of FGS, while the materials exhibited an overall significantly enhanced conductivity. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42217.     

Influences of hybrid carbon nanofillers on structures and electrical properties of sulfonated poly(1,3,4‐oxadiazole)‐based composite films

Sulfonated poly(1,3,4‐oxadiazole) (sPOD)‐based composite films, including 10 wt % hybrid carbon nanofillers composed of different weight ratios of multiwalled carbon nanotube (MWCNT) and graphene sheets, were manufactured via an efficient ultrasonication‐assisted solution mixing and casting. Fourier transform infrared (FTIR) spectra of the composite films confirmed the existence of specific interactions between sPOD backbone and MWCNT or graphene sheet. Transmission electron microscopic (TEM) images of cross sections of the composite films showed that 2‐dimensional (2D) graphene sheets formed an anisotropically oriented structure in the sPOD matrix film, but they are randomly dispersed owing to the introduction of 1‐dimensional (1D) MWCNT. Accordingly, the electrical resistivity of the composite films decreased largely from ～10³ Ω cm to ～10¹ Ω cm with the increment of the relative MWCNT content in hybrid carbon nanofillers due to the synergistic bridging effect. Thus, sPOD‐based composite films with 10 wt % hybrid carbon nanofillers exhibited high performance in electric heating by attaining rapid temperature responsiveness, high electric power efficiency, and stable maximum temperatures under given applied voltages. It was also revealed that the hybrid composite films were operationally stable over a long‐term stepwise electric heating experiment. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44499.     

Fabrication of co‐continuous poly(ε‐caprolactone)/polyglycolide blend scaffolds for tissue engineering

The apparent inability of a single biomaterial to meet all the requirements for tissue engineering scaffolds has led to continual research in novel engineered biomaterials. One method to provide new materials and fine‐tune their properties is via mixing materials. In this study, a biodegradable powder blend of poly(ε‐caprolactone) (PCL), polyglycolide (PGA), and poly(ethylene oxide) (PEO) was prepared and three‐dimensional interconnected porous PCL/PGA scaffolds were fabricated by combining cryomilling and compression molding/polymer leaching techniques. The resultant porous scaffolds exhibited co‐continuous morphologies with ～50% porosity. Mean pore sizes of 24 and 56 μm were achieved by varying milling time. The scaffolds displayed high mechanical properties and water uptake, in addition to a remarkably fast degradation rate. The results demonstrate the potential of this fabrication approach to obtain PCL/PGA blend scaffolds with interconnected porosity. In general, these results provide significant insight into an approach that will lead to the development of new composites and blends in scaffold manufacturing. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42471.     

Effect of reduced graphene oxide functionalization by sulfanilic acid on the mechanical properties of poly(styrene‐co‐acrylonitrile)/reduced graphene oxide composites

The sulfonation of reduced graphene oxide (SRGO) by the aryl diazonium salt of sulfanilic acid was focused to examine the enhancement effect on the mechanical properties of poly styrene‐acrylonitrile (SAN). The SAN was prepared by surfactant‐free emulsion copolymerization using a cationic initiator. By mixing sulfonated RGO (SRGO) into the SAN polymer matrix, positively‐charged SAN particles were attracted to the negatively‐charged surfaces of SRGO sheets via electrostatic interactions. The storage modulus of SAN‐SRGO increased to 46% at 4 wt% SRGO loading. This improvement is attributed to strong interactions between sulfonated groups on the surface SRGO and the nitrile groups of SAN. POLYM. COMPOS., 44–50, 2016. © 2014 Society of Plastics Engineers     

Low‐cost,environmentally friendly route to produce glass fiber‐reinforced polymer composites with microfibrillated cellulose interphase

In this article, an easy, effective, and eco‐friendly method to improve the mechanical performance of glass fiber‐reinforced polymer composites is proposed, which involves the coating of unsized glass fiber fabric layers by simple immersion in an aqueous suspension containing sugarcane bagasse microfibrillated cellulose (MFC), followed by vacuum‐assisted liquid resin infusion as the processing method. From atomic force microscopy, a 250 nm MFC‐rich interphase was found, revealing its ability to build micro‐ and nanobridges acting as bulk epoxy matrix and GF linker. The interlaminar shear strength, quasi‐static tensile, and flexural tests, as well as the morphological and fractographic inspection of test coupons containing the secondary substructure, broadly supported the assumption of the efficient role on the interfacial level of this nano reinforcement by enhancing the load transference and distribution from the polymer matrix to the main reinforcing fiber system compared to baseline unsized fiber‐reinforced epoxy laminates. This finding permits this class of composite materials to be considered as having great potential to achieve products with excellent performance/cost ratios. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44183.     

Preparation of polyacrylonitrile/graphene oxide by in situ polymerization

Highly oriented molecular structure is essential for high‐performance carbon fibers. The addition of a small amount of graphene sheets may enhance the degree of molecular orientation of precursor fibers during spinning and stabilization by limiting the disorientation of the chain segments. Graphene sheets merge into the carbon fiber structure during carbonization. The structure and properties of polyacrylonitrile containing graphene oxide (GO) prepared by in situ polymerization were investigated. With increasing GO loading, the molecular weight of the polymer decreased gradually from 69 000 g mol^?1 for the sample without GO to 60 600 g mol^?1 for the sample with 2.5 wt% loading of GO. Scanning electron microscopy and X‐ray diffraction results indicated that GO was dispersed in single layers in the polymer matrix. The degree of crystallization of the polymer with 0.5 wt% GO was increased by 8%. Moreover, differential scanning calorimetry and thermogravimetric analysis showed that an appropriate amount of GO, e.g. 0.5 wt%, made the carbon yield of the polymer increase by 5.0 wt%, because the GO in the composite improved the intermolecular crosslinking reaction. Copyright © 2012 Society of Chemical Industry     

In situ fast polymerization of graphene nanosheets‐filled poly(methyl methacrylate) nanocomposites

A series of graphene nanosheets‐filled poly(methyl methacrylate) nanocomposites (GNS/PMMA) is successfully prepared by an in situ fast polymerization method with graphene weight fractions from 0.1 to 2.0 wt %. In situ polymerization is effective in well dispersing of GNS in matrixes and suitable for both low and high content of GNS. The synthesis processes of polymer composites could be simplified and fast by using industrial grade graphene. The GNS fillers are found to disperse homogeneously in the PMMA matrix. The maximum electrical conductivity of the composites achieves 0.57 S m^?1, with an extremely low percolation threshold of 0.3 wt %. The electrical conductivities are further predicted by percolation theory and found to agree well with the experimental results. The results indicate that the microstructures, thermal, electrical, and mechanical properties of PMMA polymer are significantly improved by adding a low amount of graphene nanosheets. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43423.     

Fabrication and improved performance of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) for packaging by addition of high molecular weight natural rubber

The packaging industry is searching for alternative materials to attain environmental sustainability. Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate (PHBV) is a semicrystalline polymer that meets this sustainability goal since it is bioderived and biodegradable. However, its brittle nature and relatively high water permeation and transmission rates make it unsuitable for packaging applications. In addition, PHBV has poor mechanical, thermal, and rheological properties above 160 °C, limiting its use in cast sheets and thermo‐formed packaging applications. To improve these properties, new blends of PHBV with high molecular weight natural rubber at 5, 10, 15, and 25% by weight were fabricated, and physico‐chemical properties of the blends were characterized. The rubber in the blends aided in the following: increased thermal stability since the complex viscosities of the blends were improved by one log over pure PHBV at 170 °C, created more uniform melting peaks attesting to improved homogeneity, decreased water permeation to a level similar to that of traditional thermoplastics; increased the elongation at break, and stabilized the Young's modulus. Therefore, these blends can potentially be used in‐place of traditional, petroleum‐based thermoplastics in cast sheets and thermoforms. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43937.