Planar waveguide in beta barium borate formed by proton implantation and optical properties in visible and near-infrared band

β-BaB₂O₄ is nonlinear crystal that provides attractive features for various nonlinear optical application. We report on z-cut β-BaB₂O₄ planar waveguide produced by multi-energy proton implantation in total of 3 × 10¹⁶ ion/cm² at room temperature. The refractive index profile is a barrier-confined distribution, which is reconstructed according to the dark mode spectroscopy at the wavelength of 633 nm. The near-field light intensity profiles in the visible (633 nm) and near-infrared band are measured by end-face coupling method. The absorption spectra recorded over the wavelength range 185–2500 nm shows there is hardly change after proton implantation. The investigation results of the Raman spectra demonstrate that the positions and widths of all the peaks are very similar in the β-BaB₂O₄ crystal and waveguide layer.     

Fabrication of Yb3+/Er3+ codoped Bi2O3–WO3–TeO2 pedestal type waveguide for optical amplifiers

We report, for the first time to our knowledge, experimental results on pedestal waveguides produced with Yb³⁺/Er³⁺ codoped Bi₂O₃–WO₃–TeO₂ thin films deposited by RF Sputtering for photonic applications. Thin films were deposited using Ar/O₂ plasma at 5 mTorr pressure and RF power of 40 W on substrates of silicon wafers. The definition of the pedestal waveguide structure was made using conventional optical lithography followed by plasma etching. Propagation losses around 2.0 dB/cm and 2.5 dB/cm were obtained at 633 and 1050 nm, respectively, for waveguides in the 20–100 μm width range. Single-mode propagation was measured for waveguides width up to 10 μm and 12 μm, at 633 nm and 1050 nm, respectively; for larger waveguides widths multi-mode propagation was obtained. Internal gain of 5.6 dB at 1530 nm, under 980 nm excitation, was measured for 1.5 cm waveguide length (∼3.7 dB/cm). The present results show the possibility of using Yb³⁺/Er³⁺ codoped Bi₂O₃–WO₃–TeO₂ pedestal waveguide for optical amplifiers.     

Alkaline aluminum phosphate glasses for thermal ion-exchanged optical waveguide

Alkaline aluminum phosphate glasses (NMAP) with excellent chemical durability for thermal ion-exchanged optical waveguide have been designed and investigated. The transition temperature Tg (470 °C) is higher than the ion-exchange temperature (390 °C), which is favorable to sustain the stability of the glass structure for planar waveguide fabrication. The effective diffusion coefficient D_e of K⁺–Na⁺ ion exchange in NMAP glasses is 0.110 μm²/min, indicating that ion exchange can be achieved efficiently in the optical glasses. Single-mode channel waveguide has been fabricated on Er³⁺/Yb³⁺ doped NMAP glass substrate by standard micro-fabrication and K⁺–Na⁺ ion exchange. The mode field diameter is 9.6 μm in the horizontal direction and 6.0 μm in the vertical direction, respectively, indicating an excellent overlap with a standard single-mode fiber. Judd–Ofelt intensity parameter Ω₂ is 5.47 × 10⁻²⁰ cm², implying a strong asymmetrical and covalent environment around Er³⁺ in the optical glasses. The full width at half maximum and maximum stimulated emission cross section of the ⁴I_13/2 → ⁴I_15/2 are 30 nm and 6.80 × 10⁻²¹ cm², respectively, demonstrating that the phosphate glasses are potential glass candidates in developing compact optoelectronic devices. Pr³⁺, Tm³⁺ and Ho³⁺ doped NMAP glasses are promising candidates to fabricate waveguide amplifiers and lasers operating at special telecommunication windows.     

Variation of electro-optic coefficients in MgO-doped LiNbO3 single crystals

Maker fringe experiment was performed to investigate a variation of second-harmonic generation by external DC field as a function of MgO content in MgO-doped LiNbO₃ crystals. The 4 mol% MgO-doped LiNbO₃ has the largest value of the electro-optic coefficient (Γ) among all MgO-doped LiNbO₃ crystals, which is 1.05 × 10^− 5 cm/kV. The threshold phenomena was revealed in between 4 mol% MgO-doped LiNbO₃ and 5 mol% MgO-doped one.     

Compositional variation of photoluminescence from Mn doped MgAl2O4 spinel

Spinel (MgAl₂O₄) crystals doped with 1.0% Mn have been grown by floating zone (FZ) technique with various Mg compositions, x = MgO/Al₂O₃, from 0.2 to 1.0. Compositional variations of photoluminescence are evaluated for a fluorescence thermometer application using crystals grown. Strong photoluminescence (PL) peak is observed at λ from 512 to 520 nm from the crystals grown from compositions, x, from 0.3 to 1.0. Peak wavelength of PL increases linearly from 512 to 520 nm with x. Weak PL peaking at λ = 750 nm is also observed from the specimens. Compositional variations of PL are considered to be due to the variation of crystal field surrounding the Mn²⁺ ions. The variation of crystal field strength agrees with the compositional variation of lattice constant.     

Advances on the fabrication process of Er3+/Yb3+:GeO2–PbO pedestal waveguides for integrated photonics

The present work reports the fabrication, passive and active characterization of Yb³⁺/Er³⁺ codoped GeO₂–PbO pedestal waveguides. We show the advances obtained in pedestal fabrication by comparing waveguides obtained under different processes parameters. The thin films were deposited on previously oxidized silicon wafers in Ar plasma at 5 mTorr; pedestal waveguides, with 1–100 μm width range were defined by conventional lithography procedure, followed by reactive ion etching (RIE). A comparison between the results of propagation losses and internal gain is presented in order to show that the improvement of fabrication process contributed to enhance the performance of the pedestal waveguides. Reduction of about 50% was observed for the propagation losses at 632 and 1068 nm, whereas enhancement of approximately 50% was obtained for the internal gain at 1530 nm (4 and 6 dB/cm, for 70 μm waveguide width), under 980 nm excitation. The present results demonstrate the possibility of using Yb³⁺/Er³⁺ codoped GeO₂–PbO as pedestal waveguide amplifiers.     

Growth and spectroscopic properties of Ti-doped sapphire single-crystal fibers

Titanium doped sapphire (Ti:Al₂O₃) crystal fibers have been grown by the micro-pulling-down (μ-PD) method using different pulling rate in the range (0.1–0.5 mm/min). The present work has investigated the crystal growth, including diameter, bubbles defects and segregation properties. The fiber’s absorption and IR emission experiments are analyzed. The lifetime of Ti³⁺ in the IR range obtained at room temperature is 3.1 μs. Moreover, the two blue emissions at 420 nm and 470 nm bands have been discussed.     

Single crystal structure determination and infrared fluorescence of the system (K3Sr1−xNdx) (Nd1−xSr1+x) Nb10O30

The μ-pulling down technique has permitted to grow single crystal fibers, of the gross chemical formula K₃Sr₂NdNb₁₀O₃₀, having a sufficient optical quality to carry out spectroscopic studies. The crystal structure has been determined and refined to reliability factors: (i) R₁ = 0.0384 (wR₂ = 0.0665) at room temperature; (ii) R₁ = 0.0334 (wR₂ = 0.0638) at 120 K. Difference in the cationic distribution over the 15- and 12-fold sites was noticed. IR fluorescence spectra investigated under different laser excitation wavelength at 300 K and 77 K show strong emissions at 0.9 and 1.06 μm. Low temperature fluorescence behavior is compatible with Nd³⁺ ions located in both Sr²⁺ and K⁺ sites with 15- and 12-fold coordination, respectively.     

Properties of highly oriented K(Sr,Ba)2Nb5O15 thin films derived from a metal-alkoxide precursor solution

Highly oriented tungsten–bronze K(Sr,Ba)₂Nb₅O₁₅ (KSBN) thin films have been fabricated by a chemical solution deposition method. Alkoxy-derived K(Sr_0.5Ba_0.5)₂Nb₅O₁₅ (KSBN50) thin films directly crystallized into a tetragonal tungsten–bronze phase on fused silica, MgO(1 0 0), and Pt(1 0 0)/MgO(1 0 0) substrates with c-axis preferred orientation at 700 °C by optimizing the processing conditions. Ferroelectric KSBN50 thin films on Pt(1 0 0)/MgO(1 0 0) exhibited the diffuse-phase transition and typical relaxor-type dielectric behavior, which are characteristic properties along the c-axis of the tungsten–bronze (Sr,Ba)Nb₂O₆ crystal. The KSBN thin films synthesized on fused silica and MgO(1 0 0) showed high transparency over a wide wavelength range. The propagation modes of the synthesized KSBN thin films were characterized by the prism coupling method. The values of their refractive indices in TE and TM modes were 2.27 and 2.25, respectively.     

Upconversion emission in antimony–germanate double-clad optical fiber co-doped with Yb3+/Tm3+ ions

In the paper upconversion luminescence properties in Yb³⁺/Tm³⁺ co-doped antimony–germanate glass and double-clad optical fiber were studied. The concentration of lanthanides, which has shown the highest upconversion emission intensity at 478 nm (¹G₄ → ³H₆) and 650 nm (¹G₄ → ³F₄), is 1Yb₂O₃/0.1Tm₂O₃ (mol%) as a result of exciting with a laser diode (976 nm). The lifetime of ²F_5/2 (Yb³⁺) level decreases from 781 μs to 71 μs in the presence of Tm³⁺ 0.1–0.75 mol% respectively. Luminescence decay curve of glass co-doped with 1Yb₂O₃/0.75Tm₂O₃ suggests donor–donor fast migration followed by Tm³⁺ → Yb³⁺ energy transfer. Glass characterized by highest intensity of upconversion luminescence (1Yb₂O₃/0.1Tm₂O₃ mol%) was used as core of double-clad optical fiber made by modified rod-in-tube method. Mechanisms influencing differences in upconversion amplified spontaneous emission of the fabricated optical fiber and bulk glass were discussed. Reabsorption of the amplified spontaneous emission signal along the fibre resulting from Tm³⁺:³H₆ → ¹G₄, transition was observed.     

Temperature-dependent Sellmeier equations of nonlinear optical crystal Na3La9O3(BO3)8

The principal refractive indices of Na₃La₉O₃(BO₃)₈ (NLBO) crystal in the wavelength range of 0.363–2.325 μm were accurately measured by using the minimum deviation method within the temperature range from 23.5 °C to 160 °C. We derived the expressions of thermal refractive index coefficient as a function of wavelength that could be used to calculate the principal refractive indices at different wavelengths. The temperature-dependent Sellmeier equations were also derived and used to calculate the phase-matching (PM) angles for a frequency conversion device based on NLBO crystal at different temperatures. We found that the thermal refractive index coefficients of NLBO crystal changed from positive to negative values with the increase of wavelength. In addition, the phase matching conditions for third harmonic generation (THG) at different temperatures were also investigated.     

Investigation on broadband near-infrared emission in Yb3+/Ho3+ co-doped antimony–silicate glass and optical fiber

In the paper antimony–silicate glass and double-clad optical fiber co-doped with ytterbium and holmium ions were investigated. Absorption spectra in infrared (FT-IR) showed characteristic bands: 445, 605, 1037, 1168 cm⁻¹ coming from the vibration of chemical bonds of SbO₃ and SiO₄, respectively. The combination of relatively low phonon energy with a capability for greater separation (avoiding clustering) of optically active centers in the fabricated glasses should allow an effective expansion of spontaneous emission band. The highest intensity of emission at the wavelength of λ_e = 1950 nm resulting from energy transfer between Yb³⁺ → Ho³⁺ ions was observed in the glass co-doped with 1 mol% Yb₂O₃:0.5 mol% Ho₂O₃. As a result of the optical pumping at the wavelength of 976 nm in the produced optical fiber, strong and narrow band of amplified spontaneous emission (ASE) around 2.1 μm, corresponds to the ⁵I₇ → ⁵I₈ transition, were obtained.     

2–3 μm emission and fluorescent decaying behavior in Ho3+-doped tellurium germanate glass

In this work, we report the 2.05 μm emission and ∼3 μm broadband spectra of Ho₂O₃-doped 33GeO₂–30TeO₂–27PbO–10CaO (in mol%) glass under 640 nm laser excitation. Clear emission spectra due to the ⁵I₇–⁵I₈ transition and the ⁵I₆–⁵I₇ transition in Ho³⁺ are observed. The 2.05 μm emission intensity and the full width at half maximum (FWHM) of the ∼3 μm broadband depend on the Ho concentration. The peak stimulated emission cross-section of Ho³⁺ is 6.57 × 10⁻²¹ cm² at 2.05 μm, as calculated by the McCumber theory. The emission spectra are recorded and the maximum emission intensity at 2.05 μm is obtained at a doping level of 0.5 mol% Ho₂O₃ in the glass. A broad and flat emission band from 2700 nm to 3050 nm is observed in 2 mol% Ho₂O₃-doped tellurium germanate glass. The lifetime of the ⁵I₇ state decreases with the increase in Ho³⁺ concentration due to non-radiative relaxation processes. An energy transfer coefficient of 271.88 mol⁻¹ s⁻¹ is obtained.     

Effect of vapor transport equilibration and Mg doped on the luminescence of Er:LiNbO3

Luminescence properties of the congruent and vapor transport equilibration (VTE) treated Er:LiNbO₃ and Er:Mg:LiNbO₃ crystals were recorded at room temperature. It is observed that VTE treatment could enhance the emission intensity of Er³⁺ ions and doping with MgO would weaken it in the visible spectra. As a result, the luminescence intensity of Er³⁺ ions in the VTE treated Er:Mg:LiNbO₃ crystal increased up to 2.2 times than that in the congruent Er:LiNbO₃ crystal. In addition, both VTE treatment and doping with MgO result in some changes of the relative emission intensity of some peaks in the visible emission spectra. In the infrared emission spectra, the luminescence peak at 1540 nm of Er³⁺ ions shifts towards the larger wavelength when the Er:LiNbO₃ crystals were treated using VTE or doped with MgO. The changes in crystalline environment of Er³⁺ ions due to VTE treatment or doping with Mg²⁺ play a key role in these phenomena.     

Microstructure and tensile strength of PM304 composite

PM304 composite comprising NiCr (80/20) matrix (60 wt.%) combined with Cr₂O₃ (20 wt.%), Ag (10 wt.%) and eutectic BaF₂/CaF₂ (10 wt.%) as solid self-lubricants additives has been successfully prepared by mechanical alloying and powder metallurgy. The sintered PM304 samples were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDXS). The density of PM304 composite sintered at 1100 °C was 7.3 g/cm³, and the mean tensile strength 47 MPa. The size of Cr₂O₃, BaF₂/CaF₂ particles was less than 1 μm, and that of Ag particles below 5 μm. Fracture morphology indicates that the fracture of PM304 is mainly along Ni80Cr20 grains.     

Investigation of LiNbO3 thin films grown on Si substrate using magnetron sputter

A RF magnetron sputter system was used to deposit lithium niobate (LiNbO₃) thin films on (1 1 1)-oriented Si substrates. An optimal sputtering condition with RF power of 100 W, Ar/O₂ ratio of 1 and substrate temperature of 575 °C was investigated. The smallest surface roughness of 6.0 nm for the deposited LiNbO₃ was measured using atomic force microscopy. The crystallinity was examined by low angle X-ray diffractometer. Using the SOPRA GES5 spectroscopic ellipsometer, the associated refractive index and extinction coefficient as a function of wavelength were measured. High optical performance with crystallinity structure of the deposited LiNbO₃ thin films was demonstrated.     

Spectroscopic properties of B2O3–PbO–Bi2O3–GeO2 glass doped with Sm3+ and gold nanoparticles

Heavy metal oxide B₂O₃–PbO–Bi₂O₃–GeO₂ transparent glass doped with Sm³⁺ was synthesized and implanted with Au⁺ using energy of 300 keV and fluence of 1 × 10¹⁶ cm⁻². The annealing of the implanted glass at moderate temperature below the glass transition temperature induced the nucleation of gold nanoparticles, confirmed by the characteristic absorption band in the visible range and by transmission electron microscopy. Using Miés and Doylés theories for the surface plasmon resonance, the average size of the gold nanoparticles was about 4.6 nm, similar to the values observed by transmission electron microscopy. It was also observed the crystallization of a thin layer of the glass at the implanted surface after annealing, detected by X-ray diffraction and scanning electron microscope. Visible and near-infrared emission of Sm³⁺ was enhanced after annealing of the glass implanted with gold. Judd–Ofelt parameters and radiative parameters were calculated for the glass doped with Sm³⁺ with and without gold nanoparticles.     

Crystal growth and characterization of Tm doped mixed rare-earth aluminum perovskite

In this work, we present results of structural characterization and optical properties including radio luminescence of (Lu_xGd_yY_0.99?x?yTm_0.01)AP single crystal scintillators for (x, y) = (0.30, 0.19), (0, 0.19) and (0, 0) grown by the micro-pulling-down (μ-PD) method. The grown crystals were single phase materials with perovskite structure (Pbnm) as confirmed by XRD and had a good crystallinity. The distribution of the crystal constituents in growth direction was evaluated, and significant segregation of Lu and Gd was detected in (Lu_0.30Gd_0.19Y_0.50Tm_0.01)AP sample. The crystals demonstrated 70% transmittance in visible wavelength range and some absorption bands due to Tm³⁺, Gd³⁺ and color centers were exhibited in 190–900 nm. The radioluminescence measurement under X-ray irradiation demonstrated several emission peaks ascribed to 4f–4f transitions of Tm³⁺ and Gd³⁺. The ratio of emission intensity in longer wavelength range was increased when Y was replaced by Lu or Gd.     

Flux growth and thermal properties of LiBaB9O15 single crystal

A large LiBaB₉O₁₅ single crystal has been grown by the top-seeded solution growth (TSSG) method using a Li₂Mo₃O₁₀ flux system. The crystal obtained exhibits (1 1 0), (1 1 3) and (1 0 2) faces. For the first time, thermal properties of the as-grown crystal, including thermal expansion, specific heat and thermal conductivity, have been investigated as a function of temperature. The specific heat of the LiBaB₉O₁₅ crystal was measured to be 0.663–1.110 J g^?1 K^?1 over the temperature range of 20–400 °C. The crystal exhibits thermal expansion along the a- and b-axis, coupled with thermal contraction along the c-axis, over the measured temperature range of 25–500 °C. The average thermal expansion coefficients along the a- and c-axis of the LiBaB₉O₁₅ crystal from 25 to 500 °C are calculated to be α_a = 6.56 × 10^?6 K^?1 and α_c = ?4.82 × 10^?6 K^?1, respectively.     

Evaluations of pure and ytterbium doped transparent ceramic complex perovskite scintillators

Optical and scintillation properties of complex perovskite transparent ceramic scintillators of pure and Yb³⁺ doped Ba(ZrMgTa)O₃ and (LaSr)(AlTa)O₃ ceramics are reported. The materials were produced by Murata Manufacturing. Their optical properties including transmittance and photoluminescence spectra were evaluated. The ceramics demonstrated high transparency (50–70%) in visible wavelength region. Additionally, strong emission peaks were observed at 470 nm in Ba(ZrMgTa)O₃ under 284 nm excitation and at 500 nm in (LaSr)(AlTa)O₃ under 324 nm excitation. The photoluminescence decay times of Ba(ZrMgTa)O₃ and (LaSr)(AlTa)O₃ samples were 14 and 16 μs, respectively. Judging from these optical properties, Yb³⁺ emission was not observed in these materials. In radio luminescence spectra, all specimens exhibited the same emission peaks with relatively higher emission intensity. ²⁴¹Am 5.5 MeV α-ray induced pulse height spectra of the samples were also measured, and (LaSr)(AlTa)O₃ demonstrated ～500 ph/5.5 MeV α with 10 μs shaping time constant.