Improved Synthesis and X‐Ray Structure of 5‐Aminotetrazolium Nitrate

5‐Aminotetrazolium nitrate was synthesized in high yield and characterized using Raman and multinuclear NMR spectroscopy (¹H, ¹³C, ¹⁵N). The molecular structure of 5‐aminotetrazolium nitrate in the crystalline state was determined by X‐ray crystallography: monoclinic, P 2₁/c, a=1.05493(8) nm, b=0.34556(4) nm, c=1.4606(1) nm, β=90.548(9)°, V=0.53244(8) nm³, Z=4, ϱ=1.847 g cm⁻³, R₁=0.034, wR₂ (all data)=0.090. The thermal stability of 5‐aminotetrazolium nitrate was determined using differential scanning calorimetry; the compound decomposes at 167 °C. The enthalpy of combustion (Δ_combH) of 5‐aminotetrazolium nitrate ([CH₄N₅]⁺[NO₃]⁻) was determined experimentally using oxygen bomb calorimetry: Δ_combH([CH₄N₅]⁺[NO₃]⁻)=−6020±200 kJ kg⁻¹. The standard enthalpy of formation (Δ_fH°) of [CH₄N₅]⁺[NO₃]⁻ was obtained on the basis of quantum chemical computations at the electron‐correlated ab initio MP2 (second order Møller‐Plesset perturbation theory) level of theory using a correlation consistent double‐zeta basis set (cc‐pVTZ): Δ_fH°([CH₄N₅]⁺[NO₃]⁻(s))=+87 kJ mol⁻¹=+586 kJ kg⁻¹. The detonation velocity (D) and the detonation pressure (P) of 5‐aminotetrazolium nitrate were calculated using the empirical equations by Kamlet and Jacobs: D([CH₄N₅]⁺[NO₃]⁻)=8.90 mm μs⁻¹ and P([CH₄N₅]⁺[NO₃]⁻)=35.7 GPa.     

Calculation of the Detonation Velocities and Detonation Pressures of Dinitrobiuret (DNB) and Diaminotetrazolium Nitrate (HDAT‐NO3)

The enthalpies of combustion (Δ_combH) of dinitrobiuret (DNB) and diaminotetrazolium nitrate (HDAT‐NO₃) were determined experimentally using oxygen bomb calorimetry: Δ_combH(DNB)=5195±200 kJ kg⁻¹, Δ_combH(HDAT‐NO₃)=7900±300 kJ kg⁻¹. The standard enthalpies of formation (Δ_fH°) of DNB and HDAT‐NO₃ were obtained on the basis of quantum chemical computations at the electron‐correlated ab initio MP2 (second order Møller‐Plesset perturbation theory) level of theory using a correlation consistent double‐zeta basis set (cc‐pVTZ): Δ_fH°(DNB)=−353 kJ mol⁻¹, −1 829 kJ kg⁻¹; Δ_fH°(HDAT‐NO₃)=+254 kJ mol⁻¹, +1 558 kJ kg⁻¹. The detonation velocities (D) and detonation pressures (P) of DNB and HDAT‐NO₃ were calculated using the empirical equations by Kamlet and Jacobs: D(DNB)=8.66 mm μs⁻¹, P(DNB)=33.9 GPa, D(HDAT‐NO₃)=8.77 mm μs⁻¹, P(HDAT‐NO₃)=33.3 GPa.     

Synthesis,Crystal Structure,and Thermal Behavior of 3‐(4‐Aminofurazan‐3‐yl)‐4‐(4‐nitrofurazan‐3‐yl)furazan (ANTF)

The energetic material 3‐(4‐aminofurazan‐3‐yl)‐4‐(4‐nitrofurazan‐3‐yl)furazan (ANTF) with low melting‐point was synthesized by means of an improved oxidation reaction from 3,4‐bis(4′‐aminofurazano‐3′‐yl)furazan. The structure of ANTF was confirmed by ¹³C NMR spectroscopy, mass spectrometry, and the crystal structure was determined by X‐ray diffraction. ANTF crystallized in monoclinic system P2₁/c, with a crystal density of 1.785 g cm⁻³ and crystal parameters a=6.6226(9) Å, b=26.294(2) Å, c=6.5394(8) Å, β=119.545(17)°, V=0.9907(2) nm³, Z=4, μ=0.157 mm⁻¹, F(000)=536. The thermal stability and non‐isothermal kinetics of ANTF were studied by differential scanning calorimetry (DSC) with heating rates of 2.5, 5, 10, and 20 K min⁻¹. The apparent activation energy (E_a) of ANTF calculated by Kissinger's equation and Ozawa's equation were 115.9 kJ mol⁻¹ and 112.6 kJ mol⁻¹, respectively, with the pre‐exponential factor lnA=21.7 s⁻¹. ANTF is a potential candidate for the melt‐cast explosive with good thermal stability and detonation performance.     

Structural and Preliminary Explosive Property Characterizations of New 3,4,5‐Triamino‐1,2,4‐triazolium (Guanazinium) Salts

Two new highly stable energetic salts were synthesized in reasonable yield by using the high nitrogen‐content heterocycle 3,4,5‐triamino‐1,2,4‐triazole and resulting in its picrate and azotetrazolate salts. 3,4,5‐Triamino‐1,2,4‐triazolium picrate (1) and bis(3,4,5‐triamino‐1,2,4‐triazolium) 5,5′‐azotetrazolate (2) were characterized analytically and spectroscopically. X‐ray diffraction studies revealed that protonation takes place on the nitrogen N1 (crystallographically labelled as N2). The sensitivity of the compounds to shock and friction was also determined by standard BAM tests revealing a low sensitivity for both. B3LYP/6–31G(d, p) density functional (DFT) calculations were carried out to determine the enthalpy of combustion (Δ_cH (1) =−3737.8 kJ mol⁻¹, Δ_cH (2) =−4577.8 kJ mol⁻¹) and the standard enthalpy of formation (Δ_fH° (1) =−498.3 kJ mol⁻¹, (Δ_fH° (2) =+524.2 kJ mol⁻¹). The detonation pressures (P (1) =189×10⁸ Pa, P (2) =199×10⁸ Pa) and detonation velocities (D (1) =7015 m s⁻¹, D (2) =7683 m s⁻¹) were calculated using the program EXPLO5.     

Computed Thermodynamic and Explosive Properties of 1‐Azido‐2‐nitro‐2‐azapropane (ANAP)

Some thermodynamic and explosive properties of the recently reported 1‐azido‐2‐nitro‐2‐azapropane (ANAP) have been determined in a combined computational ab initio (MP2/aug‐cc‐pVDZ) and EXPLO5 (Becker–Kistiakowsky–Wilson's equation of state, BKW EOS) study. The enthalpy of formation of ANAP in the liquid phase was calculated to be Δ_fH°, ANAP(l)=+297.1 kJ mol⁻¹. The heat of detonation (Q_v), the detonation pressure (P), and the detonation velocity of ANAP were calculated to be Q_v=−6088 kJ kg⁻¹, P=23.8 GPa, D=8033 m s⁻¹. A mixture of ANAP and tetranitromethane (TNM) was investigated in an attempt to tailor the impact sensitivity of ANAP, but results obtained indicate that the mixture is almost as sensitive as pure ANAP. On the other hand, ANAP and TNM were found to be chemically compatible (¹H, ¹³C, ¹⁴N NMR; DSC) and a 1 : 1 mixture (by weight) of both components was calculated to have superior explosive properties than either of the individual components: Q_v=−6848 kJ kg⁻¹, P=27.0 GPa, D=8284 m s⁻¹.     

A DFT Study on the Structures and Energies of Isomers of 4‐Amino‐1,3‐dinitro‐1,2,4‐triazol‐5‐one‐2‐oxide: New High Energy Density Compounds

Isomers of 4‐amino‐1,3‐dinitrotriazol‐5‐one‐2‐oxide (ADNTONO) are of interest in the contest of insensitive explosives and were found to have true local energy minima at the DFT‐B3LYP/aug‐cc‐pVDZ level. The optimized structures, vibrational frequencies and thermodynamic values for triazol‐5‐one N‐oxides were obtained in their ground state. Kamlet‐Jacob equations were used to evaluate the performance properties. The detonation properties of ADNTONO (D=10.15 to 10.46 km s⁻¹, P=50.86 to 54.25 GPa) are higher compared with those of 1,1‐diamino‐2,2‐dinitroethylene (D=8.87 km s⁻¹, P=32.75 GPa), 5‐nitro‐1,2,4‐triazol‐3‐one (D=8.56 km s⁻¹, P=31.12 GPa), 1,2,4,5‐tetrazine‐3,6‐diamine‐1,4‐dioxide (D=8.78 km s⁻¹, P=31.0 GPa), 1‐amino‐3,4,5‐trinitropyrazole (D=9.31 km s⁻¹, P=40.13 GPa), 4,4′‐dinitro‐3,3′‐bifurazan (D=8.80 km s⁻¹, P=35.60 GPa) and 3,4‐bis(3‐nitrofurazan‐4‐yl)furoxan (D=9.25 km s⁻¹, P=39.54 GPa). The  NH₂ group(s) appears to be particularly promising area for investigation since it may lead to two desirable consequences of higher stability (insensitivity), higher density, and thus detonation velocity and pressure.     

Quantum Chemical Studies on the Structure and Performance Properties of 1,3,4,5‐Tetranitropyrazole: A Stable New High Energy Density Molecule

Molecular orbital calculations were performed for the geometric and electronic structures, band gap, thermodynamic properties, density, detonation velocity, detonation pressure, stability and sensitivity of 1,3,4,5‐tetranitropyrazole ( R23 ). The calculated density (approx. 2060 kg m⁻³), detonation velocity (approx. 9.242 km s⁻¹) and detonation pressure (approx. 41.30 GPa) of the model compound are appearing to be promising compared to hexahydro‐1,3,5‐trinito‐1,3,5‐triazine (RDX) and octahydro‐1,3,5,7‐tetranitro‐l,3,5,7‐tetrazocine (HMX). Bader’s atoms‐in‐molecules (AIM) analysis was also performed to understand the nature of the intramolecular N ⋅⋅⋅ O interactions and the strength of trigger X NO₂ bonds (where XC, N) of the optimized structure computed from the B3LYP/aug‐cc‐pVDZ level.     

Thermal Behavior and Specific Heat Capacity of 1‐t‐Butyl‐3,3‐dinitroazetidinium Perchlorate

1‐t‐Butyl‐3,3‐dinitroazetidinium perchlorate (TDNAZ ⋅ HClO₄) was synthesized, DSC and TG/DTG methods were used to study the thermal behavior of TDNAZ⋅HClO₄ under a non–isothermal condition. The intense exothermic decomposition process of DSC curves were analyzed to obtain its kinetic parameters. Continuous specific heat capacity (C _p) mode of micro–calorimeter was used to determine its C _p, its specific molar heat capacity (C _{p ,m}) was 365.70 J mol⁻¹ K⁻¹ at 298.15 K. The self‐accelerating decomposition temperature (T _SADT), thermal ignition temperature (T _TIT), and critical temperature of thermal explosion (T _b) were obtained to evaluate its thermal stability and safety. The above results of TDNAZ ⋅ HClO₄ were compared with those of 3,3‐dinitroazetidinium perchlorate (DNAZ ⋅ HClO₄), and the effect of tert‐butyl group on them was discussed.     

A Novel Insensitive High Explosive 3,4‐Bis (Aminofurazano) Furoxan

A novel insensitive high explosive 3,4‐bis (aminofurazano) furoxan (BAFF) was prepared using 3‐amino‐4‐acylchloroximinofurazan (ACOF) as a precursor. The molecular and crystal structures of BAFF were characterized by IR, MS, ¹H NMR, ¹³C NMR, elemental analysis, and single crystal X‐ray diffraction. The single crystal structure of BAFF recrystallized from water is monoclinic, space group P 21/c, and ρ_c=1.745 g cm⁻³, and that recrystallized from ethanol is triclinic, space group P 1, and ρ_c=1.737 g cm⁻³. BAFF has multiple crystal forms. The calculated detonation velocity by BKW code is 8100 m s⁻¹ (ρ=1.795 g cm⁻³, theoretical density calculated by quantum chemistry) and the experimental value is 7177 m s⁻¹ (ρ=1.530 g cm⁻³, charge density). The tested values of impact, friction, and electrostatic spark sensitivity show that BAFF is insensitive.     

A New Energetic Salt Semicarbazide 5‐Dinitromethyltetrazolate: A Promising Explosive Alternative

The design and synthesis of new environmentally friendly energetic materials with excellent performance and reliable safety have received considerable attention. A new energetic salt of semicarbazide 5‐dinitromethyltetrazolate (SCZ ⋅ DNMZ) was synthesized by using semicarbazide and 5‐dinitromethyltetrazolate (DNMZ) as raw materials, and fully characterized by using elemental analysis, FT‐IR spectroscopy, ¹H, ¹³C, and ¹⁵N nmR and mass spectrometry. The monocrystal of the salt was obtained and the structure was determined by X‐ray single‐crystal diffractometer. Results show that it belongs to monoclinic space group P 2₁/c with a high density of 1.867 g cm⁻³. The thermal decomposition behavior was tested by DSC and TG‐DTG technologies; the non‐isothermal kinetic parameters for the salt were calculated. The enthalpy of formation for the salt is directly dependent on the combustion heats data with a result of 341.5 kJ mol⁻¹, which is about three times higher than that of RDX. The detonation pressure (P ) and detonation velocitiy (D ) of the salt were determined as 8931 m s⁻¹ and 36.2 GPa, which are also higher than that of RDX. The impact sensitivity was tested with a result of 10.8 J. We can draw a safe conclusion that the salt has provided a promising future by using as a kind of explosive alternative. The discovery also contributes significantly to the expansion and application of the N‐heterocyclic compounds applied as energetic materials.     

Synthesis,Crystal Structure,and Thermal Behaviors of 3‐Nitro‐1,5‐bis(4,4′‐dimethylazide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP)

The energetic material, 3‐nitro‐1,5‐bis(4,4′‐dimethyl azide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP), was firstly synthesized by means of Click Chemistry using 1,5‐diazido‐3‐nitrazapentane as main material. The structure of NDTAP was confirmed by IR, ¹H NMR, and ¹³C NMR spectroscopy; mass spectrometry, and elemental analysis. The crystal structure of NDTAP was determined by X‐ray diffraction. It belongs to monoclinic system, space group C2/c with crystal parameters a=1.7285(8) nm, b=0.6061(3) nm, c=1.6712(8) nm, β=104.846(8)°, V=1.6924(13) nm³, Z=8, μ=0.109 mm⁻¹, F(000)=752, and D_c=1.422 g cm⁻³. The thermal behavior and non‐isothermal decomposition kinetics of NDTAP were studied with DSC and TG‐DTG methods. The self‐accelerating decomposition temperature and critical temperature of thermal explosion are 195.5 and 208.2 °C, respectively. NDTAP presents good thermal stability and is insensitive.     

Preparation,Crystal Structure,Thermal Decomposition,and Explosive Properties of [Cd(en)(N3)2]n

A new multi‐ligand coordination polymer of cadmium(II) ethylenediamine azide, [Cd(en)(N₃)₂]_n (en=ethylenediamine), was synthesized and characterized by using elemental analysis and FT‐IR spectrum. Its crystal structure was determined by means of X‐ray single crystal diffraction. The obtained results show that this crystal belongs to monoclinic, P2₁/n space group, a=0.6548(1) nm, b=1.0170(2) nm, c=1.2246(2) nm, β=90.23(1)°, V=0.8156(2) nm³, D_c=2.090 g⋅cm⁻³, Z=4, R₁=0.024, wR₂ (I>2σ(I))=0.0416 and S=0.998. The Cd(II) ion is six‐coordinated with four azido ligands by μ‐1, 1 azido bridges, and two ethylenediamine molecules which serve as bidentate ligands through the nitrogen atoms. The thermal decomposition mechanism of the title complex was studied by using differential scanning calorimetry (DSC) and thermogravimetry‐differential thermogravimetry (TG–DTG) techniques. Under nitrogen atmosphere with a heating rate of 10 K⋅min⁻¹, the thermal decomposition of the complex contains two main successive exothermic processes between 519 and 701 K in the DSC curve, and the final decomposed residue at 725 K is Cd. The non‐isothermal kinetics parameters were calculated by using the Kissinger's method, Ozawa–Doyle's method, pervasive integration method, and differential method, respectively. The sensitivity properties of [Cd(en)(N₃)₂]_n were also determined with standard methods.     

Effect of Nitrogen‐Doping on Detonation and Stability Properties of CL‐20 Derivatives from a Theoretical Viewpoint

Six nitrogen‐doping CL‐20 derivatives were designed and investigated as energetic materials at B3LYP/6‐31G** level based on the density functional theory method. Results show that nitrogen‐doping derivatives exhibit high crystal densities (1.98∼2.18 g cm⁻³) and positive heats of formation (451.68∼949.68 kJ mol⁻¹). Among nitrogen‐doping derivatives, 2,4,6,8,10,12‐hexanitro‐2,4,6,8,9,10,12‐heptaazaisowurtzitane(A1), 2,4,6,8,10,12‐hexanitro‐2,3,4,6,8,9,10,12‐octaazaisowurtzitane(B1) and 2,4,6,8,10,12‐hexanitro‐1,2,3,4,6,8,9,10,12‐nonaazaisowurtzitane(C1) possess better detonation velocity and pressure than CL‐20, and A1 gives the best performance (D _K‐J•A1=9.6 km s⁻¹; P _K‐J•A1=43.07 GPa). Moreover, the specific impulse, brisance, and power of N‐doping CL‐20 derivatives are also higher than that of CL‐20. The thermal stability and sensitivity of nitrogen‐doping molecules were analyzed via the bond dissociation energy (BDE ), the characteristic height (h₅₀) and electrostatic sensitivity (E _ES). The results indicate that the stability of A1, B1 and 2,4,6,8,10,12‐hexanitro‐1,2,3,4,6,7,8,9,10,12‐decaazaisowurtzitane(D1) is comparable with that of CL‐20. Considering detonation performance and stability, A1 and B1 may be promising candidates as energetic materials with superior detonation performance and favorable stability.     

Synthesis,characterization, and in vitro drug release study of 3‐arm poly‐β‐alanine

Synthesis of three arms star‐shaped poly‐β‐alanine (3‐b‐ala) based on tri(prop‐2‐yn‐1‐yl) benzene‐1,3,5‐tricarboxylate (TBT) and azido terminated poly‐β‐alanine (N₃‐P‐ala) was performed using click reaction. TBT was synthesized by nucleophilic substitution reaction between propargyl alcohol and 1,3,5‐benzenetricarbonyltrichloride. For the first time, N₃‐P‐ala was synthesized through anionic polymerization of acrylamide using sodium azide as an initiator. TBT was characterized by FT‐IR and ¹HNMR. N₃‐p‐ala was characterized by FT‐IR, GPC, and ¹HNMR and 3‐b‐ala was characterized by FT‐IR, GPC, ¹HNMR, TGA, and XRD. The synthesized 3‐b‐ala was used for drug loading and releasing studies. Polymer loaded drug (3‐b‐ala‐D) hybrid was used in in vitro studies of drug (Diclofenac sodium) release in phosphate buffer solution (PBS) at 37 ± 0.5°C and pH 7.4. The drug loading and releasing studies were analyzed by UV‐visible spectrophotometer. 3‐b‐ala‐D was examined by AFM to analyze the surface morphology and roughness. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42124.     

Phenoxaphosphino‐Modified Xantphos‐Type Ligands in the Rhodium‐Catalysed Hydroformylation of Internal and Terminal Alkenes

The solubility of the modifying ligand is an important parameter for the efficiency of a rhodium‐catalysed hydroformylation system. A facile synthetic procedure for the preparation of well‐defined xanthene‐type ligands was developed in order to study the influence of alkyl substituents at the 2‐, and 7‐positions of the 9,9‐dimethylxanthene backbone and at the 2‐, and 8‐positions of the phenoxaphosphino moiety of ligands 1 – 16 on solubility in toluene and the influence of these substituents on the performance of the ligands in the rhodium‐catalysed hydroformylation. An increase in solubility from 2.3 mmol⋅L⁻¹ to >495 mmol⋅L⁻¹ was observed from the least soluble to the most soluble ligand. A solubility of at least 58 mmol⋅L⁻¹ was estimated to be sufficient for a large‐scale application of these ligands in hydroformylation. Highly active and selective catalysts for the rhodium‐catalysed hydroformylation of 1‐octene and trans‐2‐octene to nonanal, and for the hydroformylation of 2‐pentene to hexanal were obtained by employing these ligands. Average rates of >1600 (mol aldehyde) × (mol Rh)⁻¹×h⁻¹ {conditions: p(CO/H₂) = 20 bar, T = 353 K, [Rh] = 1 mM, [alkene] = 637 mM} and excellent regio‐selectivities of up to 99% toward the linear product were obtained when 1‐octene was used as substrate. For internal olefins average rates of >145 (mol aldehyde)×(mol Rh)⁻¹×h⁻¹ {p(CO/H₂) = 3.6–10 bar, T = 393 K, [Rh] = 1 mM, [alkene] = 640–928 mM} and high regio‐selectivities up to 91% toward the linear product were obtained.     

Facile,Efficient Copolymerization of Ethylene with Bicyclic,Non‐Conjugated Dienes by Titanium Complexes Bearing Bis(β‐Enaminoketonato) Ligands

Copolymerizations of ethylene with 5‐vinyl‐2‐norbornene or 5‐ethylidene‐2‐norbornene under the action of various titanium complexes bearing bis(β‐enaminoketonato) chelate ligands of the type, [R¹NC(R²)CHC(R³)O]₂TiCl₂ ( 1 , R¹=Ph, R²=CF₃, R³=Ph; 2 , R¹=C₆H₄F‐p, R²=CF₃, R³=Ph; 3 , R¹=Ph, R²=CF₃, R³=t‐Bu; 4 , R¹=C₆H₄F‐p, R²=CF₃, R³=t‐Bu; 5 , R¹=Ph, R²=CH₃, R³=CF₃; 6 , R¹=C₆H₄F‐p, R²=CH₃, R³=CF₃), have been shown to occur with the regioselective insertion of the endocyclic double bond of the monomer into the copolymer chain, leaving the exocyclic vinyl double bond as a pendant unsaturation. The ligand modification strongly affects the copolymerization behaviour. High catalytic activities and efficient co‐monomer incorporation can be easily obtained by optimizing the catalyst structures and polymerization conditions.     

Investigation on the Thermal Expansion and Theoretical Density of 1,3,5‐Trinitro‐1,3,5‐Triazacyclohexane

The CTE and the theoretical density are important properties for energetic materials. To obtain the CTE and the theoretical density of 1,3,5‐trinitro‐1,3,5‐triazacyclohexane (RDX), XRD, and Rietveld refinement are employed to estimate the dimensional changes, within the temperature range from 30 to 170 °C. The CTE of a, b, c axis and volume are obtained as 3.07×10⁻⁵ K⁻¹, 8.28×10⁻⁵ K⁻¹, 9.19×10⁻⁵ K⁻¹, and 20.7×10⁻⁵ K⁻¹, respectively. Calculated from the refined cell parameters, the theoretical density at the given temperature can be obtained. The theoretical density at 20 °C (1.7994 g cm⁻³) is in close match with the RDX single‐crystal density (1.7990 g cm⁻³) measured by density gradient method. It is suggested that the CTE measured by XRD could perfectly meet with the thermal expansion of RDX.     

Novel and Mild Route to Phthalocyanines and 3‐Iminoisoindolin‐1‐ones via N,N‐Diethylhydroxylamine‐Promoted Conversion of Phthalonitriles and a Dramatic Solvent‐Dependence of the Reaction

Refluxing a mixture of phthalonitrile C₆R¹R²R³R⁴(CN)₂ 1 (R¹–R⁴=H), or its substituted derivatives 2 (R¹, R³, R⁴=H, R²=Me), or 3 (R¹, R⁴=H, R², R³=Cl) (1 equiv.) and N,N‐diethylhydroxylamine, Et₂NOH, (4 equivs.) in methanol for 4 h results ( Route A ) in precipitation of the symmetrical ( 6 and 8 ) and an isomeric mixture of unsymmetrical ( 7 ) phthalocyanines, isolated in good (55–65 %) yields. The reaction of phthalonitriles 1 , 2 , or 4 (R¹, R³, R⁴=H, R²=NO₂) (4 equivs.) with Et₂NOH (8 equivs.) in the presence of a metal salt MCl₂ (M=Zn, Cd, Co, Ni) (1 equiv.) in n‐BuOH or without solvent results in the formation of metallated phthalocyanine species ( 9 – 17 ). Upon refluxing in freshly distilled dry chloroform, phthalonitrile 1 or its substituted analogues 2 , 3 or 5 (R¹–R⁴=F) (1 equiv.) react with N,N‐diethylhydroxylamine (2 equivs.) affording 3‐iminoisoindolin‐1‐ones 18 – 21 ( Route B ) isolated in good yields (55–80 %). All the prepared compounds were characterized with C, H, and N elemental analyses, ESI‐MS, IR, and compounds 18 – 21 also by 1D (¹H, ¹³C{¹H}), and 2D (¹H,¹⁵N‐HMBC and ¹H,¹³C‐HMQC, ¹H,¹³C‐HMBC) NMR spectroscopy.     

Thermochemical,Sensitivity and Detonation Characteristics of New Thermally Stable High Performance Explosives

The M06‐2X/6‐311G(d,p) and B3LYP/6‐311G(d,p) density functional methods and electrostatic potential analysis were used for calculation of enthalpy of sublimation, crystal density and enthalpy of formation of some thermally stable explosives in the gas and solid phases. These data were used for prediction of their detonation properties including heat of detonation, detonation pressure, detonation velocity, detonation temperature, electric spark sensitivity, impact sensitivity and deflagration temperature using appropriate methods. The range of different properties for these compounds are: crystal density 1.51–2.01 g cm⁻³, enthalpy of sublimation 346.4–424.7 kJ mol⁻¹, the solid phase enthalpy of formation 500.4–860.6 kJ mol⁻¹, heat of detonation 13.64–17.57 kJ g⁻¹, detonation pressure 33.0–37.0 GPa, detonation velocity 8.5–9.5 km s⁻¹, detonation temperature 5488–6234 K, electric spark sensitivity 7.89–9.47 J, impact sensitivity 21–38 J, deflagration temperature 560–586 K and power [%TNT] 207–276. The results show that two novel energetic compounds N,N′‐(diazene‐1,2‐diylbis(2,3,5,6‐tetranitro‐4,1‐phenylene))bis(5‐nitro‐4H‐1,2,4‐triazol‐3‐amine) (DDTNPNT3A) and 1,1′‐(diazene‐1,2‐diylbis(2,3,5,6‐tetranitro‐4,1‐phenylene))bis(3‐nitro‐1H‐1,2,4‐triazol‐5‐amine) (DDTNPNT5A) can be introduced as thermally explosives with high detonation performance.     

γ‐FOX‐7: Structure of a High Energy Density Material Immediately Prior to Decomposition

1,1‐Diamino‐2,2‐dinitroethene, C₂H₄N₄O₄ (FOX‐7), is a novel high energy density material with low friction and impact sensitivity and a high activation barrier to detonation. In this study, the previously unknown crystal structure of the γ‐polymorph of trimorphic FOX‐7 is reported. γ‐FOX‐7 is stable from ∼435 K until the compound decomposes just above 504 K. A single crystal of α‐FOX‐7 (P2₁/n, Z=4, a=694.67(7) pm, b=668.87(9) pm, c=1135.1(1) pm, β=90.14(1)°, T=373 K) was first transformed into a single crystal of β‐FOX‐7 (P2₁2₁2₁, Z=4, a=698.6(1) pm, b=668.6(2) pm, c=1168.7(3) pm, T=423 K) and then into a single crystal of γ‐FOX‐7 at 450 K. The γ‐FOX‐7 crystal was then subsequently quenched to 200 K. The structure of γ‐FOX‐7 (P2₁/n, Z=8, a=1335.4(3) pm, b=689.5(1) pm, c=1205.0(2) pm, β=111.102(8)°, T=200 K) consists of four planar layers, each containing two crystallographically independent FOX‐7 molecules found in the asymmetric unit.