Chemical epoxidation of a natural unsaturated epoxy seed oil fromVernonia galamensis and a look at epoxy oil markets

Since 1963, production of all epoxy esters has ranged from 60 to 150 million lb annually, a steady 7% of the 1 to 2 billion lb of annual plasticizer production. Growth rates in production averaged 4.3% for all plasticizers, 3.8% for all epoxy esters and 5.0% for epoxidized soybean oil (ESBO). ESBO accounted for 70–76% of total epoxy ester production (1963–1982). The natural liquid epoxy oil fromVernonia galamensis seed, with oxirane value (4.1%) and viscosity (100 cps) similar to some commercial epoxy fatty esters but with molecular weight similar to epoxidized vegetable oils, combines some of the properties of both commercial types. Chemical epoxidation ofVernonia oil raises the oxirane content to 8.2, intermediate between ESBO and epoxidized linseed oil (ELSO), while consuming less of the costly epoxidizing reagents. Epoxidation proceeds in stepwise fashion through partially epoxidized products, which are converted to final product. Since the major fatty components ofVernonia oil arecis-12,13-epoxy-9-octadecenoic (75%) and linoleic (13%) acids, further epoxidation produces fatty acids that are specifically epoxidized at the 9,10- and 12,13-positions, and the major product has 6 epoxy units per triglyceride molecule. The resulting mixture of products has compositional and physical properties distinctly different from commercial samples of ESBO and ELSO.     

Asymmetric Sharpless epoxidation of 13S‐hydroxy‐ 9Z, 11E‐octadecadienoic acid (13S‐HODE)

The asymmetric Sharpless epoxidation of methyl 13S‐hydroxy‐9Z, 11E‐octadeca‐dienoate (13S‐HODE, 1 ) with tert‐butyl hydroperoxide (TBHP) catalysed by titanium tetraisopropoxide {Ti(ⁱOPr)₄} in the presence of L(+)‐diisopropyl tartrate (L‐DIPT) gave methyl 13S‐hydroxy‐11S, 12S‐epoxy‐9Z‐octadecenoate 2 (erythro isomer) in 84% diastereomeric excess (de). The epoxidation of 1 with TBHP catalysed by Ti(ⁱOPr)₄ in the presence of D(‐)‐DIPT yielded methyl 13S‐hydroxy‐11RR12R‐epoxy‐9Z‐octadecenoate (threo isomer) 3 in 76% de.     

Epoxidation of high trans‐1,4‐polyisoprene and its properties

A new organic‐solvent‐free water‐phase suspension method was used to synthesize partially epoxidized high trans‐1,4‐polyisoprene (TPI) to improve its properties, including oil resistance and wet‐skid resistance. The epoxidation was conducted in an aqueous peracetic acid solution and on the TPI granules prepared by a bulk precipitation method with supported titanium catalyst. The effects of the synthesis conditions, including reaction temperature, reaction time, and pH value, on the epoxy content were investigated. Epoxidized trans‐1,4‐polyisoprene (ETPI) with epoxy contents between 10 and 80% were obtained within 4 h. Both the amorphous and crystalline regions of TPI were epoxidized. The crystallization properties decreased with increasing epoxy content. ETPIs possessed lower mechanical properties than TPI but could be enhanced by vulcanization. The oil resistance and wet‐skid resistance were significantly improved after epoxidation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Epoxidation of a conjugated linoleic acid isomer

Epoxidation of methyl (9Z, 11E)‐octadecadienoate ( 1 ) with various epoxidizing agents viz. m‐chloroperoxybenzoic acid, dimethyl dioxirane, methyltrioxorhenium/hydrogen peroxide, potassium peroxomonosulfate (Oxone, 2KHSO₅ · KHSO₄ · K₂SO₄)/tetrahydrothiopyran‐4‐one, and Novozyme 435/hydrogen peroxide is described. The reactions furnished the corresponding mono‐epoxy [methyl (11, 12E)‐epoxy‐(9Z)‐octadecenoate ( 2 ) and methyl (9, 10Z)‐epoxy‐(11E)‐octadecenoate ( 3 )] and a mixture of diastereomers of syn‐ and anti‐diepoxy‐stearate [methyl (9, 10Z;11, 12E)‐diepoxystearate ( 4a‐4d )], which were identified by a combination of spectroscopic and spectrometric analyses.     

Monooxygenase system of Bacillus megaterium ALA2: Studies on linoleic acid epoxidation products

Bacillus megaterium ALA2 produces many oxygenated FA from linoleic acid: 12,13-dihydroxy-9(Z)-octadecenoic acid; 12,13,17-trihydroxy-9(Z)-octadecenoic acid; 12,13,16-trihydroxy-9(Z)-octadecenoic acid; 12-hydroxy-13,16-epoxy-9 (Z)-octadecenoic acid; and 12,17;13,17-diepoxy-16-hydroxy-9 (Z)-octadecenoic acid. Recently, we studied the monooxygenase system of B. megaterium ALA2 by comparing its palmitic acid oxidation products with those of the well-studied catalytically self-sufficient P450 monooxygenase of B. megaterium ATCC 14581 (NRRL B-3712) and of B. subtilis strain 168 (NRRI B-4219). We found that their oxidation products are identical, indicating that their monooxygenase systems (hydroxylation) are similar. Now, we report that strain ALA2 epoxidizes linoleic acid to 12,13-epoxy-9(Z)-octadecenoic acid and 9,10-epoxy-12 (Z)-octadecenoic acid, the initial products in the linoleic acid oxidation. The epoxidation enzyme did not oxidize specific double bond of the linoleic acid. The epoxidation activity of strain ALA2 was compared with the above-mentioned two Bacillus strains. These two Bacillus strain also produced 12,13-expoxy-9 (Z)-octadecenoic acid and 9,10-epoxy-12(Z)-octadecenoic acid, indicating that their epoxidation enzyme systems might be similar. The ratios of epoxy FA production by these three strains (A1 A2, NRRI B-3712, and NRRI B-4219) were, respectively, 5.56∶0.66∶0.18 for 12,13-epoxy-9(Z)-octadecenoic acid and 2.43∶0.41∶0.57 for 9,10-epoxy-12(Z)-octadecenoic acid per 50 mL medium per 48 h.     

ADSORPTION BEHAVIOR OF EPOXIDIZED FATTY ESTERS VIA BOUNDARY LUBRICATION COEFFICIENT OF FRICTION MEASUREMENTS

The frictional behaviors of a variety of fatty alkenyl esters and their corresponding fatty epoxide esters (epoxy methyl oleate (EMO) and methyl oleate (MO), epoxy methyl linoleate (EMLO) and methyl linoleate (MLO), epoxy methyl linolenate (EMLEN) and methyl linolenate (MLEN)), epoxidized soybean oil (ESBO), and a commercial epoxidized 2-ethylhexyl transesterified soybean oil (VF) as additives in hexadecane have been examined in a boundary lubrication test regime using steel contacts. Langmuir critical additive concentrations were determined, which provide the following order of negative adsorption energies: ESBO > VF > EMO ≥ EMLO > EMLEN and MLEN ≥ MLO > MO. Thus, for the similar epoxidized materials the greater degree of epoxidation results in less negative calculated total adsorption energies; this trend is reversed for the olefinic parent systems. This ordering agrees with that obtained via a more complex unconstrained cooperative interaction adsorption model. Fits of the steady-state coefficient of friction (COF) versus concentration data indicate an inverse relation of the obtained interaction parameters (α) with the primary adsorption energies (E). These results demonstrate the complexity of the adsorption mechanism that occurs.     

Catalytic epoxidation of methyl linoleate

The epoxidation of methyl linoleate was examined using transition metal complexes as catalysts. With a catalytic amount of methyltrioxorhenium (4 mol%) and pyridine, methyl linoleate was completely epoxidized by aqueous H₂O₂ within 4 h. Longer reaction times (6 h) were needed with 1 mol% catalyst loading. Manganese tetraphenylporphyrin chloride was found to catalyze the partial epoxidation of methyl linoleate. A monoepoxidized species was obtained as the major product (63%) after 20 h.     

Cure kinetics and thermal stability of micro and nanostructured thermosetting blends of epoxy resin and epoxidized styrene‐block‐butadiene‐block‐styrene triblock copolymer systems

The compatibility of styrene‐block‐butadiene‐block‐styrene (SBS) triblockcopolymer in epoxy resin is increased by the epoxidation of butadiene segment, using hydrogen peroxide in the presence of an in situ prepared catalyst in water/dichloroethane biphasic system. Highly epoxidized SBS (epoxy content SBS >26 mol%) give rise to nanostructured blends with epoxy resin. The cure kinetics of micro and nanostructured blends of epoxy resin [diglycidyl ether of bisphenol A; (DGEBA)]/amine curing agent [4,4′‐diaminodiphenylmethane (DDM)] with epoxidized styrene‐block‐butadiene‐block‐styrene (eSBS 47 mol%) triblock copolymer has been studied for the first time using differential scanning calorimetry under isothermal conditions to determine the reaction kinetic parameters such as kinetic constants and activation energy. The cure reaction rate is decreased with increasing the concentration of eSBS in the blends and also with the lowering of cure temperature. The compatibility of eSBS in epoxy resin is investigated in detailed by Fourier transform infrared spectroscopy, optical and transmition electron microscopic analysis. The experimental data of the cure behavior for the systems, epoxy/DDM and epoxy/eSBS(47 mol%)/DDM show an autocatalytic behavior regardless of the presence of eSBS in agreement with Kamal's model. The thermal stability of cured resins is also evaluated using thermogravimetry in nitrogen atmosphere. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Epoxidation of alkyl esters of 12,13-epoxyoleic acids and evaluation of the diepoxides as plasticizers for poly(vinyl chloride)

Methyl, propyl, butyl, isobutyl, hexyl, cyclohexyl, octyl and 2-ethylhexyl esters of 9,10:12,13-diepoxystearic acid were prepared by peracetic acid oxidation of the corresponding esters of 12,13-epoxyoleic acid. Using a 60 mole per cent excess of peracid at 30 C in chloroform as solvent, epoxidation was complete in 5 hr. A small aqueous phase was observed in the reaction mixture which decreases the amount of peracid available for reaction. This is due to the water and H₂O₂ present in the commercial peracetic acid used. Thin-layer and gas chromatographic analysis showed that the diepoxides formed as isomers. These did not react quantitatively with HBr by the Durbetaki method. Isomers of methyl and propyl diepoxy esters were separated by crystallization. The methyl (pure and mixed isomers), isobutyl, 2-ethylhexyl and octyl (all mixed isomers) diepoxy esters were evaluated as plasticizers of poly (vinyl chloride). Delta values showed that these esters have good compatibility. Results are compared with commercial epoxidized soybean oil control. These diepoxy esters show better low temperature properties and have higher migration and volatility values than the control. They are more efficient plasticizers than the control. The liquid isomer of the methyl ester, as well as the 2-ethylhexyl ester, should be useful as primary plasticizers and in combination with other plasticizers as plasticizer stabilizers. E. Utiliz. Res. Dev. Div., ARS, USDA.     

Preparation of fatty amide polyols <Emphasis Type="Italic">via</Emphasis> epoxidation of vegetable oil amides by oat seed peroxygenase

Prior work has shown that oat (Avena sativa) seeds are a rich source of peroxygenase, an enzyme that promotes the oxidation of carbon-carbon double bonds to form epoxides. Ground and defatted oat seeds were used as a low-cost source of peroxygenase. A systematic study of the epoxidation of i-butyl amides from linseed oil was conducted. Hexane was used as the primary component of the reaction media to eliminate the need for extraction. We found that the addition of a small amount of buffered water containing Tween 20 enhanced the epoxidation activity when using t-butyl hydroperoxide and cumene hydroperoxide as oxidants. This activity could be further enhanced by the addition of isopropyl ether. Conditions for larger-scale reactions were developed and applied to amides prepared from linseed, soybean, and canola oils. Because of enzymatic selectivity, the epoxidation of adjacent double bonds was low, and monoepoxides from the amides of oleate and linoleate predominated; the diepoxide, N-i-butyl-9,10–15,16-diepoxy-12(Z)-octadecenamide, was obtained from the amide of linolenate. The enzymatically epoxidized amides from the oils were hydrolyzed in dilute acid, and the distribution of the various classes of polyols was determined. Reflecting the high proportion of starting monoepoxides, saturated diols and diols with one double bond were the major polyols obtained from soybean and canola oils. Because linseed oil contains a high proportion of linolenate, polyols obtained from the epoxides of this oil had a major amount of the tetrol, N-i-butyl-9,10,15,16-tetrahydroxy-12(Z)-octadecenamide. In contrast, the components of polyols obtained from the hydrolysis of commercial epoxide preparations of soybean and linseed methyl esters followed by amide formation were primarily saturated diols and furan derivatives resulting from the presence of adjacent epoxide groups in these preparations.     

The composition and morphology of epoxidized trans‐1,4‐polyisoprene obtained by heterogeneous synthesis method

The aim of this study is to analyze the structure and morphology of epoxidized trans‐1,4‐polyisoprene (ETPI) obtained by water phase suspension epoxidation. With this objective, the range of epoxy group content of ETPI from 0 to 25 mol% was used. The Fourier transform infrared spectroscopy indicated that the dissoluble parts separated by ethyl acetate were epoxidized molecular chain while the insoluble parts were unreacted TPI segment. In addition, gel permeation chromatography has been used to research the change of the relative molecular weight and the the molecular weight distribution due to the effect of epoxy group content. The decrease of molecular weight states that there have small amounts of chain scission in the epoxidation reaction process. DSC data proved that the glass transition temperature raised because of the increase in rotating free energy. The decrease of ΔH_m, ΔH_c, and T_c indicated that crystallinity and the rate of crystallization are reduced. The mechanical properties of ETPI showed that the tensile strength and hardness reduced gradually. Finally, a morphological study of ETPI has been completed using phase contrast microscope and scanning electron microscopy. POLYM. ENG. SCI., 54:1260–1267, 2014. © 2013 Society of Plastics Engineers     

Synthesis of vinyl threo-9, 10-threo-12, 13-tetrahydroxystearates

Methyl esters from vernonia oil containingcis-12,13-epoxy-cis-9-octadecenoate were reacted with acetone in the presence of a boron trifluoride catalyst to yieldtrans-12,13-0-isopropylidene-9-ene derivative I. Epoxidation of the unsaturation followed by reaction with acetone gave the isomerictrans,trans-di-0-isopropylidene deriva-tivesIII of 9,10 :12,13-tetrahydroxystearates. The carboxylic acids of III were converted to vinyl esters and subsequent hydrolysis of the isopropy-lidene groups with boric acid produced vinylthreo-9,10threo-12,13-tetrahydroxystearates. By the same sequence of reactions monoepoxidized methyl linoleate yielded an optically inactive de-rivative which had identical refractive index, IR spectrum, and GLC data toIII from vernonia methyl esters. No. Utiliz. Res. Dev. Div., ABS, USDA.     

cis andtrans Analysis of fatty esters by gas chromatography: Octadecenoate and octadecadienoate isomers

A gas chromatographic method has been developed for quantitative determination of thecis andtrans percentages in octadecenoate and octadecodienoate esters. To separatecis- andtrans-monoene and diene isomers on a packed GC column, the fatty esters were stereospecifically epoxipized with peracetic acid. A simple and quantitative epoxidation procedure allows thecis- andtrans-epoxyoctadecanoates to be analyzed without prior isolation from the reaction mixture. No positional or geometric isomerization of the double bond occurred during epoxidation. Synthetic mixtures containingcis- andtrans-6,-9 and-12 octadecenoate isomers were completely separated intocis andtrans fractionstrans-15-Octadecenoate was the only isomer investigated that partially interfered in the analysis. Diene mixtures containingrans,trans-, cis,trans- andcis,-cis-9,12-octadecadienoates were also successfully analyzed by gas liquid chromatography (GLC) after epoxidation with peracetic acid. Each diene isomer formed two pairs of diepoxy diastereomers, some of which could be separated. Onecis,cis-diepoxyoctadecanoate diastereomer peak overlapped thecis,trans-diepoxyoctadecanoate peaks. The totalcis,-cis-diepoxyoctadecanoate percentages were calculated by using the ratio of the twocis,cis-diepoxyoctadecanoate diastereomers. Other positional octadecadienoate isomers were also epoxidized and analyzed by GLC. The large number of possible octadecadienoate isomers requires that some preeiminary fractionation be made before GC analysis is practical for diene isomers. Presented at the AOCS Meeting, Atlantic, City, October 1971 N. Market. Nutr. Res. Div., ARS, USDA.     

Micro‐ and macrophase separation of thermosetting systems modified with epoxidized styrene‐block‐butadiene‐ block‐styrene linear triblock copolymers and their influence on final mechanical properties

BACKGROUND: The goal of this work was to establish the minimum degree of epoxidation needed to develop nanostructured epoxy systems by modification with poly(styrene‐block‐butadiene‐block‐styrene) (SBS) triblock copolymers epoxidized to several degrees, and also to investigate the effect of polystyrene (PS) content on the final morphologies. By using two SBS copolymers, the influence of the weight ratio of the two blocks on the generated morphologies and mechanical properties was also analysed. RESULTS: Nanostructured thermosets were effectively obtained through reaction‐induced microphase separation of PS blocks from the matrix. A minimum of 27 mol% of epoxidation, which corresponds to 4.8 wt% of epoxidized polybutadiene (PB) units in the overall mixture, was needed to ensure nanostructuring of final mixtures and thus their transparency. Hexagonally ordered nanostructures were achieved for PS contents of around 16–20 wt%, which agrees with our previous results for mixtures with other SBS copolymers with different ratios between blocks. The fracture toughness of the epoxy matrix was improved or at least retained with mixing. CONCLUSION: The degree of epoxidation of PB blocks needed to switch epoxy/SBS mixtures from a macrophase‐separated to a nanostructured state has been established. The generated morphologies in the epoxy systems are mainly dependent on the PS content in the mixture. Copyright © 2008 Society of Chemical Industry     

Synthesis and characterization of cast resin based on different saturation epoxidized soybean oil

Acrylated epoxidized soybean oils (AESOs) with different level of saturation were obtained by the ring opening of different saturation epoxidized soybean oils using acrylic acid as the ring opener. AESO‐based thermosets have been synthesized by free radical polymerization of these AESOs and methyl methacrylate. The thermal properties of these resins were studied by differential scanning calorimetry and thermo‐gravimetric analysis. The results indicated that the thermal stability of these resins depends upon the epoxy value; the glass transition temperature increases with increasing of epoxy value. The tensile and impact strength of the resins were also studied, and indicated that tensile strength increases with increasing epoxy value, whereas impact strength decreases. The resulting thermosets ranged from elastomers to glassy polymers.     

New polymers from plant oil derivatives and styrene‐maleic anhydride copolymers

In this study, styrene maleic anhydride copolymer (SMA2000, Styrene : Maleic Anhydride 2 : 1) is grafted and/or crosslinked with epoxidized methyl oleate, epoxidized soybean oil, methyl ricinoleate (MR), castor oil (CO), and soybean oil diglyceride. Base catalyzed epoxy‐anhydride and alcohol‐anhydride polyesters were synthesized by using the anhydride on SMA, the epoxy or secondary alcohol groups on the triglyceride based monomers. The characterizations of the products were done by DMA, TGA, and IR spectroscopy. SMA‐epoxidized soy oil and SMA‐CO polymers are crosslinked rigid infusible polymers. SMA‐epoxidized soy oil and SMA‐CO showed T_g's at 70 and 66°C, respectively. Dynamic moduli of the two polymers were 11.73 and 3.34 Mpa respectively. SMA‐epoxidized methyl oleate, poly[styrene‐co‐(maleic anhydride)]‐graft‐(methyl ricinoleate), and SMA‐soy oil diglyceride polymers were soluble and thermoplastic polymers and were characterized by TGA, GPC, DSC, NMR, and IR spectroscopy. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Formation and distribution of oxidized fatty acids during deep‐ and pan‐frying of potatoes

The formation of cis‐9,10‐epoxystearate, trans‐9,10‐epoxystearate, cis‐9,10‐epoxyoleate, cis‐12,13‐epoxyoleate, trans‐9,10‐epoxyoleate, trans‐12,13‐epoxyoleate and the co‐eluting 9‐ and 10‐ketostearates during eight successive pan‐ and deep‐frying sessions of pre‐fried potatoes in five different types of vegetable oils – namely cottonseed oil, sunflower oil, vegetable shortening, palm oil and virgin olive oil – was followed and quantified both in fried oils and in fried potatoes by GC/MS after derivatization to methyl esters. These oxidized fatty acids were present at relatively low concentrations in the fresh oils and pre‐fried potatoes while they increased linearly with frying time, reaching up to 1140.8 µg/g in virgin olive oil (VOO) and 186.9 µg/g in potatoes pan‐fried in VOO after eight pan‐frying sessions, with trans‐9,10‐epoxystearate predominating in all cases. The formation of polymerized triacylglycerols (PTG) was also quantified in frying oils by size exclusion HPLC. Pan‐frying caused higher oxidized fatty acid and PTG formation compared to deep‐frying. Epoxyoleates and PTG concentrations were increased after frying in polyunsaturated oils, while epoxystearate and 9‐ and 10‐ketostearate concentrations were increased after frying in monounsaturated oils. No specific absorption of the oxidized fatty acids by the fried potatoes seems to occur. The dietary intake of oxidized fatty acids and PTG by the consumption of fried potatoes was discussed.     

小尺寸TS-1的合成及其催化油酸甲酯环氧化

为高效催化大尺寸油酸甲酯（MO）分子环氧化反应制备绿色增塑剂环氧油酸甲酯（EMO），采用水热法合成钛硅沸石（TS-1）和纯硅沸石（S-1），进一步利用水蒸气辅助晶化法成功制备了小尺寸的纳米TS-1（TS-1-s）和S-1（S-1-s）催化剂。重点考察了TS-1-s催化剂合成过程中溶胶干燥温度、溶胶与水质量配比、水蒸气晶化温度和晶化时间对其微观结构和催化油酸甲酯环氧化反应性能的影响。进一步，采用了XRD、UV-vis、SEM、TEM等手段对TS-1-s催化剂的结构进行了系统的表征。结果表明，相较于传统大晶粒TS-1催化剂（MO转化率39.20%，EMO选择性82.56%），TS-1-s催化剂表现出更优异的催化性能（MO转化率53.58%，EMO选择性85.48%）。     

Epoxidation ofLesquerella andLimnanthes (Meadowfoam) oils

Lesquerella gordonii (Gray) Wats andLimnanthes alba Benth. (Meadowfoam) are species being studied as new and alternative crops. Triglyceride oil from lesquerella contains 55–60% of the uncommon 14-hydroxy-cis-11-eicosenoic acid. Meadowfoam oil has 95% uncommon acids, includingca. 60%cis-5-eicosenoic acid. Both oils are predominantly unsaturated (3% saturated acids), and have similar iodine values (90–91), from which oxirane values of 5.7% are possible for the fully epoxidized oils. Each oil was epoxidized withm-chloro-peroxybenzoic acid, and oxirane values were 5.0% (lesquerella) and 5.2% (meadowfoam). The epoxy acid composition of each product was examined by gas chromatography of the methyl esters, which showed that epoxidizedL. gordonii oil contained 55% 11,12-epoxy-14-hydroxyeicosanoic acid, and epoxidized meadowfoam oil contained 63% 5,6-epoxyeicosanoic acid, as expected for normal complete epoxidation. Mass spectrometry of trimethylsilyloxy derivatives of polyols, prepared from the epoxidized esters, confirmed the identity of the epoxidation products and the straightforward nature of the epoxidation process. Synthesis and characterization of these interesting epoxy oils and derivatives are discussed.     

Isothermal Curing Kinetics of Epoxidized Fatty Acid Methyl Esters and Triacylglycerols

Plant oil triacylglycerols are attractive renewable resources for biobased epoxy resins. We investigated the curing kinetics of three model epoxidized fatty acid methyl esters and representative epoxidized triacylglycerols with varied epoxide functionalities and distributions in the presence of a latent cationic initiator. Isothermal differential scanning calorimetry (DSC) was used to analyze the curing kinetics of the epoxy systems, and kinetic parameters (i.e., rate constants, reaction orders) were determined. Both epoxidized fatty esters and triacylglycerols followed the autocatalytic curing mechanism, and the DSC data were analyzed according to the Kamal autocatalytic model. Epoxidized methyl linoleate (EMLO) had the highest maximum curing rate, followed by epoxidized methyl linolenate (EMLON), and epoxidized methyl oleate (EMO) had the lowest maximum curing rate. We conclude that EMLO with two epoxide groups has the highest reactivity in this curing system, while the EMO with one epoxide group has the lowest reactivity. For epoxidized triacylglycerols, epoxidized camelina oil had the highest curing reactivity at higher temperatures, followed by epoxidized linseed oil and soybean oil.