Thermal effects in poly(hexamethylene adipamide) and polyoxymethylene at high hydrostatic pressures

The dynamic mechanical properties, transition behavior, and morphology of polycarbonate (PC)-polyurethane (PU) semi-interpenetrating polymer networks (semi-IPNs) and linear blends were studied by means of Rheovibron, differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). Two glass transition temperatures corresponding to polycarbonate and polyurethane were observed and microphase separation was further evident with TEM. In PC/PU semi-IPNs, two glass transition temperatures were shifted inwardly indicating that the interpenetrating network of polyurethane increases the mutual miscibility of PC and PU. The average phase domain was 500Å in semi-IPNs and the phase domains were in the range 1000–6000 Å in linear blends of the corresponding polymers. The compatibilities of PC and PU were greatly influenced by the molecular weight of polyols in PU prepolymer and the ratio of NCO/OH; lower molecular weight polyols and higher NCO/OH ratio resulted in better compatibility, and finer phase domains in PC and PU linear blends and semi-IPNs.     

Thermodynamic investigation of thermoresponsive xanthan‐poly (N‐isopropylacrylamide) hydrogels

Polysaccharide‐based hydrogels, such as xanthan maleate/poly(N‐isopropylacrylamide) (PNIPAAm) interpenetrated polymer networks, are thermostimulable materials of interest for the controlled release of biologically active components due to conformation changes at the low critical‐solution temperature (LCST) PNIPAAm phase transition. The phase transition of these interpenetrated polymer network hydrogels, where PNIPAAm is in a ‘confined’ environment, was examined by high resolution magic angle spinning nuclear magnetic resonance and differential scanning calorimetry. High resolution magic angle spinning nuclear magnetic resonance spectroscopy allows the accurate determination of LCST and an evaluation of the corresponding thermodynamic data. More particularly, the evolution of these data as a function of the composition of the hydrogel, and of the external parameters such as pH and ionic strength, was considered. LCST shows a minimal value with increasing xanthan content. Moreover, it was possible to calculate, as a function of temperature, the fraction of NIPAAm which remains uncollapsed. The data obtained for pure PNIPAAm hydrogels are in good agreement with recently published results. The phase transition of PNIPAAm in a diphasic hydrogel is broader when PNIPAAm is ‘confined’ within an interpenetrated polymer network than in a pure PNIPAAm crosslinked network. The widening of the transition with increasing xanthan content indicates a reduction of the PNIPAAm interchain aggregation in a network structure. Copyright © 2011 Society of Chemical Industry     

Equilibrium swelling behavior of thermally responsive metal affinity hydrogels, Part I: Compositional effects

Copolymer hydrogels were synthesized from N-isopropylacrylamide (NIPAAm) and vinyl iminodiacetic acid (VIDA) monomers, incorporating thermally responsive swelling and metal affinity properties. Compared to pure NIPAAm hydrogels, the copolymer hydrogels showed significantly increased swelling due to the hydrophilic VIDA groups while still retaining their sharp phase transition behavior. However, excessive amounts of VIDA caused the gels to lose this behavior and not fully collapse even at temperatures as high as 80 °C. When chelated with copper the VIDA groups became less hydrophilic, partially reversing the increased swelling due to VIDA, enabling the gels to regain their phase transition behavior. Increasing the crosslinking density in the gels generally had the effect of decreasing their swelling. However, for gels with higher VIDA amounts, increasing the crosslinking density unexpectedly caused the hydrophilic groups with bound waters to resist the hydrophobic group-induced collapse at high temperatures. The results suggest that the NIPAAm, VIDA and crosslinker amounts and copper chelation are essential elements in the molecular design of the gel to retain a sharp phase transition. These variables were used to develop a phase transition phase diagram.     

Dynamic mechanical study of filled semi-interpenetrating polymer networks: Influence of γ-Fe2O3 on microphase structure

The preparation of filled two-component semi-interpenetrating polymer networks (semi-IPNs) is described and the results of an investigation of their morphology by means of dynamic mechanical spectroscopy are considered. The influence of an active dispersed filler (γ-Fe₂O₃) on the semi-IPNs phase structure is studied. A comparison is made between filled and unfilled semi-IPNs consisting of compatible or incompatible polymers. In the case of a semi-IPN of compatible polymers, the introduction of γ-Fe₂O₃ was observed to cause phase separation. With a two-phase semi-IPN the introduction of the filler enhanced the phase separation. The presence of two distinct peaks (the dynamic glass transition temperatures) corresponding to those of the two initial homopolymers shows the semi-IPN to have a two-phase structure.     

Temperature responsive hydrogel with reactive nanoparticles

The application of temperature responsive hydrogels with ion‐exchange domain for nanoscale catalytic reactions is an emerging and attractive area because of the combination of individual unique features: temperature responsive tunability by the polymer domain and the high catalytic reactivity of the nanomaterial. Here, we report the entrapment and/or direct synthesis of reactive Fe and Fe/Pd nanoparticles (about 40–70 nm) in a temperature responsive hydrogel network (N‐isopropylacrylamide (NIPAAm), and NIPAAm—PAA). These nanoparticles are stabilized in the hydrogel network and the dechlorination (using trichloroethylene, TCE, as a model compound) reactivity in water is enhanced and controllable in the temperature range of 30–34°C involving polymer domain transitions at lower critical solution temperature (LCST) from hydrophilic to collapsed hydrophobic state. Water fraction modulation of the network and the enhancement of pollutant partitioning by the thermally responsive polymers play an important role in the catalytic activity. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

pH-/temperature-sensitive carboxymethyl chitosan/poly(N-isopropylacrylamide-co-methacrylic acid) IPN: preparation,characterization and sustained release of riboflavin

Dual crosslinked pH-/temperature-sensitive interpenetrating polymer networks (IPN) were prepared by free-radical copolymerization of N-isopropylacrylamide and methylacrylic acid (MAA) using N,N′-methylenebisacrylamide as a crosslinker in carboxymethyl chitosan (which was crosslinked by Ca²⁺) aqueous solution. Scanning electron microscopy was used to observe the morphologies of the IPN at different pH values and temperatures. The effects of MAA content and environmental pH on the “pH-/temperature-induced” phase transition behavior of the IPN hydrogels were investigated. The phase transition temperature was adjusted to 37 °C by changing the MAA content. The effects of drug-loaded content, crosslinking density, environmental pH, and temperature on the drug release behavior of the drug-loaded IPN hydrogel were also explored. Based on results, the hydrogel possessed pH/temperature sensitivity. The swelling ratio and phase translation temperature of the hydrogel were lower at lower pH. These values were lowest at pH 3.0. The release behavior of riboflavin was dependent on preparation condition, environmental pH, and temperature. Drug cumulative release was only 6 % at pH 1.8 for 2 h. The drug cumulative release was 13 % before the drug-loaded hydrogel reached the position with pH 6.8. The drug release rate was higher at lower temperature. Therefore, dual-crosslinked hydrogel holds much potential as a drug site-specific carrier.     

A study of hydrogel thermal-dynamics using Fourier transform infrared spectrometer

A rapid and reliable method was presented for studying hydrogel dynamics/kinetics. Two temperature-sensitive hydrogels, poly-N-isopropylacrylamide (poly(NIPAAm)) and the copolymer of N,N-diethylacrylamide and sodium methacrylate (molar ratio=97:3, poly(NDEAAm-co-MAA)) were synthesized. The thermal-behaviors of the gels were studied through the absorbance intensities of both swollen water and gel frame components, and the peak positions of amide band along heating/cooling pathways under dynamic Fourier transform infrared (FTIR) probing. The results showed that the lower critical solution temperature (LCST) of poly(NIPAAm) is about 33-35 °C, which is consistent with reported value of ∼34 °C. Compared to poly(NIPAAm), poly(NDEAAm-co-MAA) has relatively continuous volume phase transition, starting at ∼35 °C and a better thermal-reversibility with similar swelling and deswelling profiles over a larger temperature range (10-80 °C for poly(NDEAAm-co-MAA) vs. 10-33 °C for poly(NIPAAm)). The H-bonding water along phase transition was also studied, showing a less reversibility of poly(NIPAAm) compared to poly(NDEAAm-co-MAA). In addition, FTIR spectrometer was also used to study the volume changes of poly(NDEAAm-co-MAA) under variations in environmental salinity.     

A visible light photoinitiator system to produce acrylamide based smart hydrogels: Ru(bpy)3 as photopolymerization initiator and molecular probe of hydrogel microenvironments

A novel visible light bimolecular photoinitiator system (tris(2,2′-bipyridine)ruthenium(II)/N,N-dimethylaniline) is shown to be able to polymerize N-isopropylacrylamide (NIPAM) and 2-Acrylamido-2-Methylpropanesulfonic Acid (AMPS), in aqueous solution, to render high molecular weight polymers and crosslinked gels. The photoinitiator is especially useful to synthesize thermosensitive polymers and gels, because it could be used at temperatures below the phase transition, allowing the polymer chain to grow in its uncoiled state. The polymerization and conversion rates are affected by the structure of the monomer, decreasing in the order NIPAM > AAm > AMPS. The properties of the gels agree with literature data, suggesting that the method is able to produce conventional and smart hydrogels. The microenvironments present near linear polymers and inside crosslinked gels were investigated by measuring fluorescence lifetimes and steady state anisotropy of the metallic complex (Ru(bpy)₃⁺², present in the solution. Clear effects of the polymer presence on the photophysical properties of the complex are observed. Therefore, the same metallic complex could be used as photoinitiator of vinyl polymerization and as molecular probe to sense the hydrogel microenvironments.     

Temperature induced phase transition of interpenetrating polymer networks composed of poly(vinyl alcohol) and copolymers of N-isopropylacrylamide with acrylamide or 2-acrylamido-2-methylpropyl-sulfonic acid

Interpenetrating polymer networks (IPNs) composed of poly(vinyl alcohol) (PVA) and poly(N-isopropylacrylamide-co-X) (PNIPAAm-co-X) were prepared by using a two-step method. Hydrophilicity of PNIPAAm chains was increased by adding acrylamide (AAm; hydrophilic neutral monomer) or 2-acrylamido-2-methylpropylsulfonic acid (AMPS; anionic charged monomer). The effect of the incorporation of chemically crosslinked PVA into the temperature induced phase transition as well as swelling behavior of the responsive hydrogels were studied. The volume phase transition (VPT) of IPNs was investigated by cloud point measurement and differential scanning calorimetry. Significant differences in volume phase transition enthalpies of PNIPAAm (ΔH_VPT) and volume phase transition temperatures (T_VPT) were found. The ΔH_VPT decreases with increasing co-monomer concentration. In several cases the phase transition was not followed by macroscopic shrinking of IPNs. Thus this property is advantageous for several technical applications.     

Thermal phase transition of poly(N‐propionylethyleneimine) hydrogel

This article presents the preparation of the hydrogel of poly(N‐propionylethyleneimine) and its interpenetrating polymer network (IPN) hydrogel containing polyacrylamide by means of γ‐ray radiation and a study of the phase transition temperature of these hydrogels. As a result, the hydrogel of the crosslinked poly(N‐propionylethyleneimine) exhibited swelling below and shrinking above the phase transition temperature (about 61°C), as well as the lower critical solution temperature (LCST) of the liner polymer–water system. The experiment also showed that the LCST of the IPN hydrogel could be adjusted by the incorporation of the second component polyacrylamide. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2457–2461, 1999     

Polymeric hydrogels and supercritical fluids: The mechanism of hydrogel foaming

A novel method, the hydrogel foaming, is used in this work for the production of porous, polymer-based materials by processing with supercritical carbon dioxide (CO₂). This method is applied to crystalline hydrophilic polymers that, practically, exhibit no phase transition (melting or glass transition) below thermal decomposition temperature and, due to their crystallinity, do not absorb CO₂. Such polymers are mainly natural (semi)-crystalline polymers (e.g. chitosan, cellulose, etc.) for which the classical polymer foaming method with supercritical carbon dioxide is not applicable. The hydrogel foaming process (similar to classical polymer foaming) is applied to gelatin, chitosan, and gelatin/chitosan blend hydrogels that are physically crosslinked and may also be chemically crosslinked with glutaraldehyde vapour. After the foaming process, water is removed from the gels by mild freeze-drying leading to porous materials. Pore size control can be achieved by controlling different process parameters. Gelatin exhibits solubility in water up to high concentrations and forms thermoreversible hydrogels, rendering it a suitable choice for the investigation of the process mechanism. The mechanism of hydrogel foaming is explored on the basis of X-ray diffraction, calorimetry, rheology, sorption, Raman spectroscopy measurements and theoretical calculations with the NRHB (Non Random Hydrogen Bonding) equation-of-state model. The sorption and Raman spectroscopy measurements suggest that, besides dissolution in water (of the hydrogel), extensive CO₂ sorption by the polymer also occurs. Based on these results, a critical discussion is made and a mechanism for the hydrogel foaming is proposed.     

Preliminary swelling and dye sorption studies of acrylamide/4-styrenesulfonic acid sodium salt copolymers and semi-interpenetrating polymer networks composed of gelatin and/or PEG

Semi-IPN hydrogels based gelatin (GEL) and/or poly (ethylene glycol) (PEG) were prepared with acrylamide (AAm) and 4-styrenesulfonic acid sodium salt, (SSS) as a water adsorbent for cationic dye (methyl violet, MV) sorption. For this, chemically crosslinked copolymer of AAm/SSS copolymer with GEL and/or PEG were prepared by polymerization of aqueous solution of AAm and SSS using ammonium persulfate (APS)/N,N,N′,N′-tetramethylethylenediamine (TEMED) as redox initiating pair in presence of poly(ethylene glycol)diacrylate (PEGDA) as crosslinker. FT-IR analysis was used to identify the presence of different repeating units in the semi-IPNs. Surface morphology was characterized by scanning electron microscopy (SEM). Some swelling and diffusion characteristics were calculated for different semi-IPNs and hydrogels prepared under various formulations. Water uptake, and dye sorption properties of the crosslinked polymeric systems such as AAm/SSS, AAm/GEL/SSS, AAm/PEG/SSS and AAm/GEL/PEG/SSS hydrogel systems were investigated as a function of chemical composition of the hydrogels. MV have used in sorption studies.     

Swelling Characteristics of pH- and Thermo-Sensitive Crosslinked Poly(Vinyl Alcohol) Grafts

Grafting of N-isopropylacrylamide, NIPAAm, onto partially and fully hydrolyzed poly(vinyl alcohol–g-maleic anhydride), PVA–MA, was carried out in presence of ammonium persulfate as initiator. The crosslinked PVA–MA–NIPAAm copolymers were prepared in presence of different weight percentages of methylene bisacrylamide, MBA, as crosslinker and N,N,N,N′-tetramethylethylenediamine, TMEA, as accelerator. Crosslinked PVA–MA–NIPAAm copolymers were prepared at two different temperatures 5 and 55 °C. The structural features of these grafts were confirmed by ¹H NMR analysis. Solution behaviors of both PVA–MA and PVA–MA–NIPAAm were evaluated from viscosity measurements. The swelling ratios of the crosslinked polymers were measured at different temperatures and pH values. The phase transition of the crosslinked gels was measured from DSC analysis. Crosslinked PVA–MA–NIPAAm grafts show different pH and temperature sensitivity. The swelling behaviors of PVA–MA–NIPAAm were referred to formation of hydrogen bonding between amide and carboxylic groups and also to hydrophobic aggregation of NIPAAm grafts.     

Hydrogels reinforced with nanoclays with improved response rate

Two series of semiinterpenetrating networks (SIPN) based on linear hydrophilic poly(vinyl alcohol) (PVA) and thermo‐responsive poly(N‐isopropylacrylamide) (PNIPA), physically crosslinked with inorganic clay, are presented. The hydrogels with different crosslinking densities were prepared by varying the content of clay from 1 to 6 wt % and contained linear interpenetrant, PVA in the range of 0.5–1.5 wt %. The effect of clay content on swelling/deswelling behavior and phase transition in PNIPA gels, as well as the feasibility of reinforcing the gels with high molecular weight PVA, were analyzed. The thermal response of hydrogels, followed by DSC, confirmed that the insertion of hydrophilic PVA did not have a significant effect on the onset of the volume phase transition temperature, while the response was faster. The equilibrium degree of swelling of SIPNs and PNIPA hydrogels was in the range of 9–79 and decreased with increasing content of clay. The internal morphology and surface wettability of the hydrogels were investigated by scanning electron microscope analysis and contact angle measurements, respectively. The network structural parameters of the PNIPA and SIPN nanocomposites hydrogels, such as the average molecular weight between crosslinks, M_c, and effective crosslinking density, N_e, were determined by dynamic mechanical analysis. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44535.     

Synthesis and swelling behavior of thermosensitive IPN hydrogels based on sodium acrylate and N‐isopropyl acrylamide by a two‐step method

A series of interpenetrating polymer network (IPN) hydrogels having higher swelling ratio (SR) and thermosensitivity were synthesized from sodium acrylate (SA) and N‐isopropyl acrylamide (NIPAAm) by a two‐step method. A series of the porous poly(sodium acrylate ‐co‐1‐vinyl–2‐pyrrolidone) [poly(SA‐co‐VP)], (SV), hydrogels were prepared from acrylic acid having 90% degree of neutralization and VP monomer in the first step. The second step is to immerse the SV dried gels into the NIPAAm solution containing initiator, accelerator, and crosslinker to absorb NIPAAm solution and then polymerized to form the poly(SA‐co‐VP)/poly(NIPAAm) IPN hydrogels (SVN). The effect of the different molar ratios of SA/VP and the content of NIPAAm on the swelling behavior and physical properties of the SVN hydrogels was investigated. Results showed that the SVN hydrogels displayed an obviously thermoreversible behavior when the temperature turns across the critical gel transition temperature (CGTT) of poly(NIPAAm) hydrogel. The pore diameter distributions inside the hydrogel also indicated that the pore sizes inside the SVN hydrogels were smaller than those inside the SV hydrogels. At the same time, the more proportion of SA was added into the hydrogel, the larger pore diameter of the SV hydrogel was formed. The results also showed that the SR decreased with an increase of the VP content in the SV hydrogel and more obviously decreased in the SVN hydrogels. The SVN networks also showed stronger shear moduli than SV hydrogels. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Shape memory polymer system of semi-interpenetrating network structure composed of crosslinked poly (methyl methacrylate) and poly (ethylene oxide)

Shape memory semi-interpenetrating polymer networks (semi-IPNs) composed of crystalline poly (ethylene oxide) (PEO) and crosslinked poly (methyl methacrylate) (x-PMMA) have been investigated. The selected compositions show shape memory property with a reasonable fast recovery (recovery time ∼1 min) and shape recovery ratio of 99%. Effects of composition (x-PMMA/PEO = 80/20…60/40) and crosslinker (triethyleneglycol dimethacrylate) concentration (up to 6 wt.%) on the creep property were also studied. The recovery time of the semi-IPNs increased and the creep compliance decreased with increasing crosslinker concentration. The network structure containing PEO crystal was characterized by scanning electron microscopy (SEM). Differential scanning calorimetry (DSC) indicated that the PEO, present confined in the semi-IPN, melts at a lower temperature compared to the pure PEO. Dynamic mechanical analysis (DMA) showed a decrease in the glass transition (T_g) of the semi-IPN due to the phase mixing of amorphous PEO and PMMA. Both the glassy and rubbery moduli (E_g and E_r, respectively) were lower for the semi-IPNs than for the x-PMMA network. On the other hand, the E_g/E_r ratio was markedly increased for the semi-IPNs supporting an easy shaping along with a good shape fixing.     

Preparation and evaluation of thermo-reversible copolymer hydrogels containing chitosan and hyaluronic acid as injectable cell carriers

Poly(N-isopropylacrylamide) end-capped with a carboxyl group (PNIPAM-COOH) was grafted to chitosan for synthesizing thermo-reversible chitosan-g-poly(N-isopropylacrylamide) (CPN), which was further grafted with hyaluronic acid (HA) to form hyaluronic acid-g-CPN (HA-CPN). PNIPAM-COOH, CPN and HA-CPN formed injectable free-flowing aqueous solutions and exhibited reversible sol-to-gel phase transition (above 5% polymer concentration) at 30 °C. Chemical properties and temperature-dependent physical properties of the polymer hydrogels, such as rheological behavior, phase transition kinetics, and water content were characterized in detail. The mechanical stiffness of hydrogels increased with the presence of chitosan in the copolymer, but decreased after conjugation with HA. Chitosan and HA grafting also endowed higher water content and resistance to volume contraction during phase change of the copolymer solution. In vitro cell culture experiments with chondrocytes and meniscus cells in HA-CPN hydrogel showed beneficial effects on the cell phenotypic morphology, proliferation, and differentiation. Progressive tissue formation was demonstrated by monotonic increases in extracellular matrix contents and mechanical properties.     

Theoretical prediction of domain sizes in IPN's and related materials

A series of new theoretical equations for predicting the domain size in interpenetrating polymer networks, IPN's, and related materials was derived. The equations are based on a domain formation process comprising the crosslinking density of each polymer, mixing and demixing thermodynamics, network swelling and elastic deformation of each polymer network, and the interfacial tension between two polymers. The new equations are applicable to both crosslinked and linear materials. The experimental variables required to determine the domain size include the volume fraction and crosslink level of each polymer (or molecular weight, if linear), the interfacial tension, and the temperature. The theory was applied to poly(n-butyl acrylate)/polystyrene IPN's and semi-IPN's. The results are also compared with the earlier theory of Donatelliet al.     

Synthesis and Characterization of Temperature-Sensitive Poly(N-isopropylacryamide) Hydrogel with Comonomer and Semi-IPN material

A series of temperature and pH sensitive hydrogels were synthesized using N-isopropylacrylamide (NIPAAm) as main monomer, sodium alginate (SA) as semi-IPN material, ethyl acrylate (EA) and acrylic acid (AA) as comonomer, and N-maleyl chitosan (N-MACH) as cross-linker. The temperature and pH sensitive behavior, swelling/deswelling kinetics of the hydrogels were investigated. And the mechanism of the phase transition was summed up. Sodium alginate/Poly(N-isopropylacryamide) semi-interpenetrating polymer network (SA/PNIPAAm semi-IPN) hydrogels exhibited a lower critical solution temperature (LCST) at about 32 °C with no significant deviation from the conventional PNIPAAm hydrogels. Poly(N-isopropylacryamide-co-ethyl acrylate) (P(NIPAAm-co-EA)) hydrogels exhibited LCST at 29–31°C, increasing the amount of EA in the hydrogel gradually decreased the LCST. Poly(N-isopropylacryamide-co-acrylic acid) [P(NIPAAm-co-AA)] hydrogels exhibited LCST at 34–39°C, with decreasing NIPAAm/AA from 96/4 to 92/8 and 90/10, the LCST increased from 34°C to 37°C and 39°C. In the swelling/deswelling kinetics, all the dried hydrogels exhibited fast swelling/deswelling behavior, which might be attributed to macroporous structures of the hydrogels.     

Naturally functionalized triglyceride oils in interpenetrating polymer networks

The use of naturally functionalized triglyceride oils in interpenetrating polymer networks (IPNs) is reviewed. An oil bearing either hydroxyl or epoxide functionality may be crosslinked to form a soft elastomer in the presence of another monomer or network to form an IPN, or in the presence of a linear polymer, to form a semi-IPN. Polymerization and characterization of naturally functionalized triglyceride oils are mentioned, with emphasis on the distribution and effect of nontrifunctional triglycerides on elastomer properties. The simultaneous synthesis of polystyrene/functional triglyceride oil IPNs is reviewed, and several factors influencing IPN morphology and mechanical properties are discussed. The synthesis and properties of poly(ethylene terephthalate)/functional triglyceride oil semi-IPNs are emphasized, with the importance of ester interchange in the synthetic procedure, and factors influencing crystallinity and morphology are introduced.