Synthesis and properties of highly branched poly(urethane–imide) via A2 + B3 approach

A series of highly branched poly(urethane–imide) (HBPUI) were synthesized via A₂ + B₃ approach using isophorone diisocyante (IPDI), polycarbonatediol (PCDL), 3,3′,4,4′-Benzophen-onetetracarboxylic dianhydride (BTDA), and poly(oxyalkylene) triamine (ATA) as materials. The structure of the products was characterized by FT-IR and ¹³C-NMR. The molecular weights were characterized by gel permeation chromatograph (GPC). The solution viscosity, thermal, and mechanical properties were measured by rotational rheometer, differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), tensile tests, and dynamic mechanical analysis (DMA), respectively. The HBPUI showed lower viscosity than that of linear poly(urethane–imide) (LPUI), nevertheless T _g of HBPUI was higher than that of LPUI. TGA indicated that the thermal degradation of poly(urethane–imide) occurred above 300 °C, which was higher than conventional polyurethane. The tensile strength of HBPUI was obviously improved by increasing the content of BTDA and the molar ratio of [A₂]/[B₃]. The effects of the content of BTDA and the molar ratio of [A₂]/[B₃] on the storage modulus of the polymers were also studied.     

Ring-Opening Polymerization of Epoxidized Soybean Oil

Ring-opening polymerization of epoxidized soybean oil (ESO) catalyzed by boron trifluoride diethyl etherate (BF₃·OEt₂) in methylene chloride was conducted in an effort to develop useful biodegradable polymers. The resulting polymerized ESO (PESO) were characterized using infrared (IR) spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), ¹H NMR, ¹³C NMR, solid state ¹³C NMR and gel permeation chromatography (GPC). The results indicated that PESO materials were highly crosslinked polymers. They had glass transition temperatures ranging from −16 to −48 °C. TGA results showed the PESO polymers were thermally stable at temperatures up to 220 °C. Decomposition of the polymers was found to occur at temperature greater than 340 °C. GPC results indicated the extracted soluble substances from PESO polymers were ESO dimers, trimers and polymers with low molecular weights. The resulting crosslinked polymers can be converted into hydrogels by chemical modification, such as hydrolysis. These soy based hydrogels will find applications in personal care and health care areas.     

Synthesis and Polymerization of a Four-Arm Star with Pendent Cyclopentadienyliron Moieties

The synthesis of the title complex was achieved via the reaction of a η⁶-p-dichlorobenzene-η⁵-cyclopentadienyliron cation with an organic four-arm core to produce the tetrairon complex. This tetrairon-containing core was subsequently polymerized via nucleophilic aromatic substitution with various dinucelophiles such as 4,4′-thiobenzenethiol, bisphenol-A, 4,4′-(1-phenylethylidene)bisphenol, 4,4′-biphenol, bis(4-hydroxyphenyl)methane, producing five different cross-linked cationic organoiron polymers. Another cross-linked polymer was produced via direct polymerization of the four-arm organic core with the η⁶-p-dichlorobenzene-η⁵-cyclopentadienyliron cation. Due to the poor solubility of these cross-linked polymers, solid-state ¹³C CPMAS NMR was performed in order to verify that polymerization was successful. Thermogravimetric analysis (TGA) revealed that following the decoordination of the cyclopentadienyliron moieties, the polymers were thermally stable. Differential scanning calorimetry (DSC) showed that the polymers exhibited glass transition temperatures (T _g’s) ranging from 104 to 146°C. This article is dedicated to Professor Ian Manners for his outstanding contribution to the field of metal-containing polymers.     

Amine-terminated aromatic and semi-aromatic hyperbranched polyamides: synthesis and characterization

A facile synthetic approach to aromatic and semiaromatic amine-terminated hyperbranched polyamides via direct polymerization of triamine (B₃) with different diacid chlorides (A₂) was explored. An aromatic triamine, 1,3,5-tris(4′-aminophenylcarbamoyl)benzene (TAPCB), was synthesized and monomers were characterized by elemental analysis, FTIR, ¹H and ¹³C NMR spectroscopy. Finally, the polycondensation reaction of TAPCB with terephthaloyl chloride (TPC), isophthaloyl chloride (IPC), sebacoyl chloride (SC) and adipoyl chloride (AC) resulted in the preparation of four hyperbranched polyamides i.e., HBPA 1, 2, 3 and 4, respectively. FTIR and ¹H NMR analyses confirmed the structures of the ensuing polymers and DB was found between 0.51–0.55. These thermally stable amorphous HBPAs were soluble in polar aprotic solvents at room temperature having glass transition temperatures (T_g) between 138–198 °C. Inherent viscosities (η_inh) and weight average molecular weights (M_w) were in the range of 0.27–0.35 dL/g and 1.3 × 10⁴–2.7 × 10⁴, respectively. Future prospects are envisaged.     

Synthesis and characterization of hyperbranched poly(silyl ester)s

Hyperbranched poly(silyl ester)s were synthesized via the A₂ + B₄ route by the polycondensation reaction. The solid poly(silyl ester) was obtained by the reaction of di‐tert‐butyl adipate and 1,3‐tetramethyl‐1,3‐bis‐β(methyl‐dicholorosilyl)ethyl disiloxane. The oligomers with tert‐butyl terminal groups were obtained via the A₂ + B₂ route by the reaction of 1,5‐dichloro‐1,1,5,5‐tetramethyl‐3,3‐diphenyl‐trisi1oxane with excess amount of di‐tert‐butyl adipate. The viscous fluid and soft solid poly(silyl ester)s were obtained by the reaction of the oligomers as big monomers with 1,3‐tetramethyl‐1,3‐bis‐β(methyl‐dicholorosilyl)ethyl disiloxane. The polymers were characterized by ¹H NMR, IR, and UV spectroscopies, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The ¹H NMR and IR analysis proved the existence of the branched structures in the polymers. The glass transition temperatures (T_g's) of the viscous fluid and soft solid polymers were below room temperature. The T_g of the solid poly(silyl ester) was not found below room temperature but a temperature for the transition in the liquid crystalline phase was found at 42°C. Thermal decomposition of the soft solid and solid poly(silyl ester)s started at about 130°C and for the others it started at about 200°C. The obtained hyperbranched polymers did not decompose completely at 700°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3430–3436, 2006     

Synthesis and characterization of poly(arylene ether) containing cyanate ester networks

A series of bisphenols containing ether linkage were prepared from halo phenol/dihalo compound and dihydroxy compounds in the presence of K₂CO₃. The bisphenols were transformed to cyanate esters by treatment with cyanogen bromide using triethyl amine catalyst. The structure of all the five bisphenols and the cyanate esters were structurally confirmed by FT-IR, ¹H-NMR and ¹³C-NMR spectral methods and elemental analysis. The cyanate esters were cured at 100 °C (30 min) → 150 °C (30 min) → 200 °C (60 min) → 250 °C (3 hr). The thermal properties of the cured resins were studied by DSC and TGA. DSC analysis shows that these cyanate esters exhibit T _g in the range of 203–234 °C. The CE(c) has the highest glass transition temperature. The cyanate ester CE(e) shows the lowest T _g which is due to its asymmetric structure. The initial degradation temperature of the cured resins was found to be in the range of 324–336 °C. The Limiting Oxygen Index (LOI) value, determined by Van Krevelen’s equation, is in the range of 35.5–38.7.     

Polyimides based on furanic diamines and aromatic dianhydrides: synthesis,characterization and properties

Novel polyimides containing furan moieties were prepared from the resulting furanic diamine monomers with various aromatic dianhydrides including 1,2,4,5-benzene-tetracarboxylic dianhydride, 3,3′,4,4′-biphenyltetracarboxylic dianhydride, 4,4′-oxydiphthalic anhydride, and hexafluoroisopropylidene 2,2-bis(phthalic anhydride), via a two-step process. The resulting polyimides were characterized by solubility tests, viscosity measurements, FTIR, ¹H NMR spectroscopy, differential scanning calorimetric (DSC), and thermogravimetric analysis (TGA) analysis. The polyimides with inherent viscosities in the range of 0.048–0.095 L/g showed excellent solubility in aprotic amide and organic solvents, such as N,N-dimethylacetamide, N-methyl-2-pyrrolidinone, dimethylformamide and acetone, chloroform, etc. DSC showed glass transition temperatures (T _g) in the range of 116–143 °C. These polymers showed excellent thermal stability up to 390 °C.     

Conjugated opto/electroactive ethynylene-carbazole polymers with TTF as pendant group

Three conjugated ethynylene-carbazole polymers with Tetrathiafulvalene (TTF) as pendant group (P1–P3) were synthesized by using sonogashira coupling reaction and characterized by ¹H NMR, GPC, CV, UV–Vis, FL, and TGA. CV and UV–Vis spectra showed that an intramoleular interaction existed between the electron-rich moiety TTF and electron-deficient moiety polyethynylcarbazole of the polymers. A strong fluorescence quench (ca. 99%) could be observed, compared to the polyethynylene-carbazole without TTF units, which could be ascribed to the photo-induced electron transfer (PET) interaction from TTF moiety to the polyethynylene-carbazole backbone. The observed onset decomposition temperatures (T _d) for P1–P3 varied from 256 to 298 °C. The polymers mentioned above exhibited good thermal properties and higher conductivity (neutral conductivity ~7–11 × 10⁻⁷ S cm⁻¹; doped conductivity ~6–11 × 10⁻⁴ S cm⁻¹).     

Synthesis and characterization of poly(aryl ether ketone)s with fluorinated phenyl in the side chain

New bisphenol monomers, (4-fluorophenyl)hydroquinone (3b) and (3,4-difluoro phenyl)hydroquinone (3c), were synthesized in a two-step synthesis. Poly(aryl ether ketone)s (PAEKs) (4a–c) were derived from these fluorinated bisphenols and nonfluorinated bisphenol—phenylhydroquinone (3a) with 4,4′-diflourobenzophenone via a nucleophilic aromatic substitution polycondensation. The obtained polymers had inherent viscosities of 0.50–0.92 dL/g. Thermal analysis showed that the obtained PAEKs had excellent thermal properties, the glass transition temperatures ranged from 148 to 160 °C, and the temperatures at 5% weight loss (Td₅) were above 527 °C and the temperatures at 10% weight loss (Td₁₀) were above 544 °C in nitrogen. All the polymers showed excellent solubility and could dissolve in common organic solvents, such as DMSO, NMP, DMF, etc. So the films of them were easily cast from their solutions, which possessed good mechanical properties, with tensile strengths of 95.2–104.0 MPa, Young’s moduli of 2.68–3.06 GPa, and elongation at break of 15–32%. Furthermore, the prepared PAEKs displayed low dielectric constants (2.75–2.95 at 1 MHz) and hydrophobic character (contact angles for water: 83.9^o–98.4^o).     

Synthesis of polyamides from p-Xylylene glycol and dinitriles

A series of polyamides were prepared by direct polyamidation of the p-Xylylene glycol with various commercially available dinitriles via Ritter reaction. All the synthesized polyamides showed good solubility in amide type solvents such as N-methyl-2-pyrrolidone, N,N-dimethyl acetamide, N,N-dimethyl formamide, and dimethyl sulfoxide. They exhibited inherent viscosities in the range of 0.25–0.62 dl/g. Elemental analysis, differential scanning calorimetry, thermogravimetric analysis, infrared and H¹-NMR spectroscopies were used to characterize the polymers. According to the DSC analysis, the glass transition temperatures of the polyamides were found to be 95–174°C. Thermogravimetric analysis indicated that the polymers show the 10% weight loss temperatures in the range of 250–350°C.     

Polyamides and polyimides prepared from diaminomaleonitrile and their cross-linking to thermally stable resins

Unsaturated cyano-substituted polyamide and polyimides were prepared from the reactions of diaminomaleonitrile with terephthaloyl dichloride and tetracarboxylic dianhydrides such as pyromellitic dianhydride and benzophenone tetracarboxylic dianhydride. The polymers were characterized by inherent viscosity measurements, by FTIR and ¹H-NMR spectroscopy, as well as by DTA and TGA. They were soluble in polar aprotic solvents and certain strong inorganic and organic acids. Upon curing at 300°C for 70 h, cross-linked polymers were obtained that were stable up to 397–426°C in N₂ or air and afforded anaerobic char yield of 56–61% at 800°C. Their glass transition temperatures as determined by the thermal mechanical analysis (TMA) method were 210–249°C. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of side-chain poly(methacrylate)s bearing new azo-moieties

New side-chain poly(methacrylate)s with azo moieties were prepared by free radical copolymerization, starting from methyl methacrylate (MMA) and some original azo-monomers. The chromophore content was evaluated from ¹H-NMR spectroscopy and elemental analyses; all structures exhibited a high content of azobenzene units. UV–Vis measurements have also supported this fact. Reactivity ratios for the methacrylate systems and their corresponding Q–e values were calculated based on several initial feed compositions (MMA and the newly synthesized azo-monomers) using an integral method with its appropriate software. The polymers were also characterized by FTIR, SEC and DSC-TGA techniques. The coloured poly(methacrylate)s exhibited glass transition temperatures between 141 and 168 °C and thermal stabilities up to 306 °C.     

Synthesis and Thermal Properties of Polycarbonates Based on Bisphenol A by Single-phase Organic Solvent Polymerization

Linear alternating polycarbonates optionally containing bisphenol A were prepared from the reaction of linear aliphatic, substituted aliphatic, cyclic aliphatic and aromatic dihydroxy compounds with bisphenol A bischloroformate at 0–5 °C using a single organic phase as a reaction medium (e.g., Chloroform or tetrahydrofuran). Twelve aromatic–aromatic and aromatic–aliphatic polycarbonate polymers were prepared utilizing this procedure. The effect of the experimental conditions on the polymerization was studied and discussed. The polymers obtained were characterized by IR spectra, ¹H and ¹³C NMR spectra, inherent viscosity, differential scanning calorimetry, and thermogravimetric analyses.     

Study on the properties of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-BaO lead-free glass using in the electronic pastes

The Sb₂O₃ doping lead-free glass in Bi₂O₃-B₂O₃-BaO ternary system were prepared in the composition of several different subsystem, and the glass powder was produced through the process of water quenching. Glass transition temperatures (T _g ), glass soften temperatures(T _s ), the volume resistivity (ρ) in the temperature range of 80–200°C, and linear thermal coefficients of expansion in the temperatures range of 25–300°C (α_25–300) were measured for subsystems along with the different ratio of Bi₂O₃, B₂O₃ and BaO. For these subsystems, T _g ranged from 458 to 481°C, and T _s ranged from 490 to 512°C, both decreasing with the increasing of Bi₂O₃/B₂O₃ ratio, and increasing with the increasing of BaO/B₂O₃ ratio. The measured α_25–300 ranged from 65.3 to 76.3 × 10⁻⁷ K⁻¹, with values increasing with increasing Bi₂O₃/B₂O₃ and BaO/B₂O₃ ratio. The volume resistivity remains at a high standards, which may caused by it’s non-alkali composition, and it fluctuated from 10¹³ to 10¹¹ Ω cm with the temperature varied from 80–200°C. The structure of Bi₂O₃-B₂O₃-BaO ternary leadfree glass system was mearsured by FT-IR. The IR studies indicate that these glasses are made up of [BiO₆], [BO₃], and [BO₄] basic structural units, and it appears that Ba²⁺ acts as a glass-modifier in this ternary system, but the Bi³⁺ has entered the glass network when it is in relative high content so as to change the α_25–300, T _s and T _g .     

Synthesis and characterization of soluble polyamides from bis-[(4′-aminobenzyl)-4-benzamide] ether and various diacids

New aromatic diamine containing preformed amide, ether, and methylene; bis-[(4′-aminobenzyl)-4-benzamide] ether (BABE), was synthesized and characterized by FT-IR, NMR, and mass spectrometry. Aromatic–aliphatic polyamides were prepared from BABE with aliphatic/aromatic diacids via Yamazaki’s polymerization. The polyamides were characterized by FT-IR, ¹H NMR, inherent viscosity [η_inh], solubility tests, differential scanning calorimetry [DSC], thermogravimetric analysis [TGA], and X-ray diffraction [XRD]. Polyamides had inherent viscosities 0.35–0.84 dL/g, soluble in aprotic polar solvents like N-methyl-2-pyrrolidone, N, N-dimethyl acetamide and dimethyl sulphoxide containing LiCl due to an amorphous to partially crystalline morphology; as XRD patterns indicated. DSC analysis of polyamides showed glass transition temperatures 166–268 °C. Polyamides showed high thermal stability as they did not degrade below 300 °C, had 10% weight loss temperature higher than 375 °C, and the char yields at 900 °C were 22–55%; indicating potential applications as engineering materials.     

Synthesis and characterization of novel poly(amide-imide)s derived from N,N’-Bis(p-aminophenyl) terephthalamide

Summary An aromatic diamine monomer, N,N’-bis (p-aminophenyl) terephthalamide (PTP) was synthesized by employing sodium hydride as catalyst, 1,4-phenyleneamine (PDA) and dimethyl terephthalate (DMT) as starting materials. The structure of monomer was characterized by FT-IR, ¹H-NMR and elemental analysis. A series of new poly(amide-imide)s (PAIs) having inherent viscosities of 1.85–2.07 dL/g were synthesized from aromatic diamine PTP with various commercially available aromatic dianhydrides using a standard two-stage process with thermal imidization of poly(amic-acid) (PAA) films. The structure of polymers was respectively investigated by FT-IR. The WAXD patterns indicated an amorphous morphological structure of these polymers. All the new PAIs had good thermal stability with the glass transition temperature of 234–248 °C, the temperatures of 5% and 10% weight loss in nitrogen were in the range of 518–541 °C and 543–564 °C respectively. All PAIs were found to hold outstanding mechanical properties with the tensile strengths of 267.83–326.14 Mpa and Young’s modulus of 4.67–5.83 GPa.     

New organosoluble and thermally stable poly(urea-imide)s prepared from one-pot polyaddition reactions

A new class of aromatic poly(urea-imide)s having biphenylene pendant group was prepared by the diphenyl azidophosphate (DPAP) activated one-pot polyaddition reaction of a preformed imide ring-containing dicarboxylic acid, 4-p-biphenyl-2,6-bis(4-trimellitimidophenyl)pyridine ( 1 ) with various aromatic diamines. A model compound was also synthesized by the reaction of diimide-dicarboxylic acid 1 with two mole equivalents of aniline. In this direct method the polymers were prepared by polyaddition reactions of the in situ-formed diisocyanate with the aromatic diamines. The inherent viscosities of the polymers were measured in the range of 0.11–0.15 dL g⁻¹. The ultraviolet λ_max values of the poly(urea-imide)s were also determined. Furthermore, crystallinity of the resultant polymers was evaluated by wide-angle X-ray diffraction method, and they exhibited nearly a noncrystalline nature. All of the resulting polymers exhibited excellent solubility in common polar solvents. The glass transition temperatures of the polymers determined by DSC thermograms were in the range 241–272°C. The temperatures at 10% weight loss from their TGA curves were found to be in the range 406–437°C in nitrogen. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Thermogravimetric characteristics of <Emphasis Type="Italic">α</Emphasis>-cellulose and decomposition kinetics in a micro-tubing reactor

The pyrolysis characteristics and kinetics of α-cellulose were investigated using thermogravimetric analyzer (TGA) and micro tubing reactor, respectively. Most of the α-cellulose decomposed between 250 and 400 °C at heating rate of 5–20 °C/min. The apparent activation energy was observed in the range of 263.02 kJ mol^?1 to 306.21 kJ mol^?1 at the conversion of 10-80%. The kinetic parameters were determined by nonlinear least-squares regression of the experimental data, assuming first-order kinetics. It was found from the kinetic rate constants that the predominant reaction pathway was A(α-cellulose) to B(bio-oil) rather than A(α-cellulose) to C(gas; C₁-C₄) and/or to B(bio-oil) to C(gas; C₁-C₄) at temperatures of 340-360 °C.     

Catalytic dry oxidation of aniline,benzene, and pyridine adsorbed on a CuO doped activated carbon

Adsorption of aniline, benzene and pyridine from water on a copper oxide doped activated carbon (CuO/AC) at 30 °C and oxidation behavior of the adsorbed pollutants over CuO/AC in a temperature range up to 500 °C are investigated in TG and tubular-reactor/MS systems. Results show that the AC has little activity towards oxidation of the pollutants and CuO is the active oxidation site. Oxidation of aniline occurs at 231–349 °C and yields mainly CO₂, H₂O and N₂. Oxidation of pyridine occurs at a narrower temperature range, 255–309 °C, after a significant amount of desorption starting at 150 °C. Benzene desorbs at temperatures as low as 105 °C and shows no sign of oxidation. The result suggests that adsorption-catalytic dry oxidation is suitable only for the strongly adsorbed pollutants. Oxidation temperatures of CuO/AC for organic pollutants are higher than 200 °C and pollutants desorbing easily at temperatures below 200 °C cannot be treated by the method. This work was presented at the 7 ^th China-Korea Workshop on Clean Energy Technology held at Taiyuan, Shanxi, China, June 26–28, 2008.     

Heat transfer in a high temperature fluidized bed

The heat transfer characteristics between the bed and immersed tube in a high temperature fluidized bed (7.5 cm I.D.×70 cm H) were investigated with sand and iron ore particles. The heat transfer coefficients were measured at operating temperatures of 200–600°C and gas velocities of 1–10 U_mf. The bed emissivity measured by the radiation probe was found to be 0.8–0.9. The experimentally obtained radiative heat transfer coefficient was in the range of 30–80 W/m²K for the operating temperature of 400–800°C and the contribution of radiation to total heat transfer was about 13% and 18% for the operating temperatures of 400°C and 600°C, respectively.