Life-cycle assessment of selected management options for air pollution control residues from waste incineration

Based on available technology and emission data seven selected management options for air-pollution-control (APC) residues from waste incineration were evaluated by life-cycle assessment (LCA) using the EASEWASTE model. Scenarios were evaluated with respect to both non-toxicity impact categories (e.g. global warming) and toxicity related impact categories (e.g. ecotoxicity and human toxicity). The assessment addressed treatment and final placement of 1 tonne of APC residue in seven scenarios: 1) direct landfilling without treatment (baseline), 2) backfilling in salt mines, 3) neutralization of waste acid, 4) filler material in asphalt, 5) Ferrox stabilization, 6) vitrification, and 7) melting with automobile shredder residues (ASR). The management scenarios were selected as examples of the wide range of different technologies available worldwide while at the same time using realistic technology data. Results from the LCA were discussed with respect to importance of: energy consumption/substitution, material substitution, leaching, air emissions, time horizon aspects for the assessment, and transportation distances. The LCA modeling showed that thermal processes were associated with the highest loads in the non-toxicity categories (energy consumption), while differences between the remaining alternatives were small and generally considered insignificant. In the toxicity categories, all treatment/utilization options were significantly better than direct landfilling without treatment (lower leaching), although the thermal processes had somewhat higher impacts than the others options (air emissions). Transportation distances did not affect the overall ranking of the management alternatives.     

Energetic valorization of wood waste: estimation of the reduction in CO2 emissions

This paper investigates the potential CO₂ emission reductions related to a partial switch from fossil fuel-based heat and electricity generation to renewable wood waste-based systems in Flanders. The results show that valorization in large-scale CHP (combined heat and power) systems and co-firing in coal plants have the largest CO₂ reduction per TJ wood waste. However, at current co-firing rates of 10%, the CO₂ reduction per GWh of electricity that can be achieved by co-firing in coal plants is five times lower than the CO₂ reduction per GWh of large-scale CHP. Moreover, analysis of the effect of government support for co-firing of wood waste in coal-fired power plants on the marginal costs of electricity generation plants reveals that the effect of the European Emission Trading Scheme (EU ETS) is effectively counterbalanced. This is due to the fact that biomass integrated gasification combined cycles (BIGCC) are not yet commercially available. An increase of the fraction of coal-based electricity in the total electricity generation from 8 to 10% at the expense of the fraction of gas-based electricity due to the government support for co-firing wood waste, would compensate entirely for the CO₂ reduction by substitution of coal by wood waste. This clearly illustrates the possibility of a ‘rebound’ effect on the CO₂ reduction due to government support for co-combustion of wood waste in an electricity generation system with large installed capacity of coal- and gas-based power plants, such as the Belgian one.     

Evaluation of carbonated incineration bottom ash using exhaust gas and CO2 discharged from waste incineration facilities as ground material

This study focused on a carbonation treatment that immobilizes trace elements such as lead (Pb) in incineration bottom ash (IBA) using the exhaust gas and the refined carbon dioxide generated (CO₂) recovered at the Japan's first incineration facility, which recovers CO₂ in the gaseous form. This study describes (1) the bearing capacity of IBA from the municipal solid waste (MSW) obtained through the California bearing ratio (CBR) test to investigate the possibility of using IBA as a base course material, (2) mechanical characteristics of IBA using the cone index test, to investigate the possibility of using as an embankment material, and (3) leaching properties of IBA from MSW obtained through a single batch leaching test and the long-term outdoor exposure of the leaching test to evaluate the effect of carbonation treatments. Results reveal that there was no effect of trace components not included in the separated and recovered CO₂, and that the effect of carbonation could be obtained even if the exhaust gas was used directly. The carbonated IBA can be applied as a sub-base course material based on its mechanical properties, regardless of the carbonation conditions. In addition, carbonated IBA can be used as an embankment material owing to its sufficient cone index value. Regarding the heavy metal and metalloid leaching behavior, it was revealed that all the IBA samples satisfied the soil environmental standards set by the Ministry of the Environment, Japan, except for Cr (VI). The long-term leaching characteristics of carbonated IBA showed that Pb could be immobilized over a long period.     

Ambient wood smoke exposure and respiratory symptoms in Tasmania, Australia

Wood smoke exposure has been associated with adverse respiratory health outcomes, with much of the current research focused on wood smoke from domestic heating and cooking. This study examined the association between respiratory symptoms and outdoor wood smoke in Launceston, Tasmania, where ~ 30% of homes use wood burners for domestic heating. This ecological study examined data from participants of the 2004 Tasmanian Longitudinal Health Study postal survey and compared the prevalence of respiratory symptoms in Launceston (n = 601) with that in Hobart (n = 1071), a larger Tasmanian city with much less wood smoke. Multivariate logistic regression models were used to investigate the associations of interest while adjusting for gender, atopy, history of allergic disease and current smoking status. There were no significant differences in symptom prevalence between Launceston and Hobart. Two subgroup analyses, which examined participants with pre-existing chronic respiratory disease, and those who reported actively using a wood burner in their home, also did not find significant differences. Any impact of wood smoke on non-specific respiratory symptoms might have been overshadowed by other important determinants of respiratory health, such as vehicle exhaust and tobacco smoking, or were too small to have been detected. However, the lack of detectable differences in symptom prevalence might also reflect the success of regulatory action by local governments to reduce wood smoke emissions in Launceston. The results of other epidemiological studies support an association between ambient wood smoke exposure and adverse respiratory health. Further investigations of wood smoke exposure in Australian settings are needed to investigate the lack of significant associations found in this study, especially studies of indoor air quality and health impacts in children and elderly populations.     

放射性废物焚烧设备及工艺应用进展

热解焚烧是处理放射性有机废物的重要工艺,能大幅提高废物处理的体积。由于现有焚烧炉设备建成时间较早,且放射性废物种类增加,其运行和维护保养都面临新的挑战。本文概述了国内外放射性焚烧炉的发展现状和工艺特点,对焚烧炉运行中的问题进行归类,并展望未来的改进方向。     

城市垃圾焚烧飞灰制复合阿利尼特水泥的试验研究

以城市垃圾焚烧(MSWI)飞灰为主要原料,在实验室成功烧制了阿利尼特水泥熟料,研究了研制的阿利尼特水泥熟料与石膏及混合材的适应性.结果表明,阿利尼特水泥宜添加石膏作为激发剂,适宜掺量为5％;阿利尼特矿物水化很快,可能是其早期强度的主要来源,具有开发为一种快硬水泥的潜能.MSWI飞灰和矿渣粉适宜用作阿利尼特水泥的混合材,试样AB3(阿利尼特水泥熟料80％+石膏5％+MSWI飞灰15％)和试样AD3(阿利尼特水泥熟料80％+石膏5％+矿渣粉15％)为较适宜比例.     

Using plastic chutes for extracting small logs and short pieces of wood from forests in Artvin,Turkey

Over 80% of extraction operations in Turkish forest are practiced with man power as skidding or sliding, but these methods have technical, ergonomic and environmental problems. Using plastic log chute in extraction operations in slopes with a gradient of 20% or more can reduce these problems, and chutes can be used for sliding small logs or short pieces of wood downhill. In this study, two polyethylene chute (AcarOLUKPeF50/600- AcarOLUKPeD60/600) and one fiberglass chute (AcarOLUKFb50/500) systems in extraction operations in mountainous area were evaluated in Artvin, Turkey. The study revealed that AcarOLUKPeF50/600 plastic chute was the most productive (42.86 stere/h) and AcarOLUKFb50/500 was the least (15.12 stere/h). It was also determined that using of plastic chute was ergonomic and could reduce the damage to tree roots, seedlings and trunk of remaining trees.     

Characterization of medical waste from hospitals in Tabriz, Iran

Medical waste has not received enough attention in recent decades in Iran, as is the case in most economically developing countries. Medical waste is still handled and disposed of together with domestic waste, creating great health risks to health-care stuff, municipal workers, the public, and the environment. A fundamental prerequisite for the successful implementation of any medical waste management plan is the availability of sufficient and accurate information about the quantities and composition of the waste generated. The objectives of this study were to determine the quantity, generation rate, quality, and composition of medial waste generated in the major city northwest of Iran in Tabriz. Among the 25 active hospitals in the city, 10 hospitals of different size, specializations, and categories (i.e., governmental, educational, university, private, non-governmental organization (NGO), and military) were selected to participate in the survey. Each hospital was analyzed for a week to capture the daily variations of quantity and quality. The results indicated that the average (weighted mean) of total medical waste, hazardous-infectious waste, and general waste generation rates in Tabriz city is 3.48, 1.039 and, 2.439 kg/bed-day, respectively. In the hospital waste studied, 70.11% consisted of general waste, 29.44% of hazardous-infectious waste, and 0.45% of sharps waste (total hazardous-infectious waste 29.89%). Of the maximum average daily medical waste, hazardous-infectious waste, and general waste were associated with N.G.O and private hospitals, respectively. The average composition of hazardous-infectious waste was determined to be 35.72% plastics, 20.84% textiles, 16.70% liquids, 11.36% paper/cardboard, 7.17% glass, 1.35% sharps, and 6.86% others. The average composition of general waste was determined to be 46.87% food waste, 16.40% plastics, 13.33% paper/cardboard, 7.65% liquids, 6.05% textiles, 2.60% glass, 0.92% metals, and 6.18% others. The average bulk densities of total medical waste, hazardous-infectious waste, and general waste were determined to be 99.58, 96.16 and 101.26 kg/m³, respectively. Significant differences were observed between the medical waste characteristics of the hospitals studied here and those reported in other studies. In conclusion, the characteristics of generated medical waste, current environmental problems and strict budgets necessitate that the implementation of efficient management, training, and segregation program be top priorities if we are to minimize the treatment and disposal costs and reduce the risks of hazardous-infectious waste in Tabriz city.     

Fate of wood extractives in wastewater treatment plants at kraft pulp mills and mechanical pulp mills

Extensive environmental effects of the forest industry led to implementation of activated sludge treatment of effluents in the 1980s. Although the existence of chlorinated compounds in the effluents has decreased, a discussion about the possible environmental effects of elemental-chlorine-free (ECF) and total-chlorine-free (TCF) bleached pulp mill effluents has arisen, and chronic effects on aquatic organisms have still been found. Recently, studies have mainly focussed on wood extractives and their role in the effects of effluents. Resin acids and unsaturated fatty acids are found to be toxic, and plant sterols are reported to have adverse endocrine effects on water organisms already at low concentrations. In this study, Finnish wastewater treatment plants of an ECF kraft pulp mill, a paper mill, and an integrated TCF kraft pulp and paper mill were sampled in order to ascertain how wastewater treatment plants, and especially activated sludge treatments, remove wood extractives. Concentrations of extractives in discharged wastewaters varied between 0.4 and 11 g/t kraft or mechanical pulp, and the concentrations decreased over 95% during the treatment processes. Of the wood extractives, 1.1-64% were adsorbed to biosludge and 35-99% were degraded or transformed to other forms during the activated sludge treatment. A major part of these compounds were discharged in particles (74-99%). The removal of extractives was efficient even in the effluent treatment plant, which was highly loaded during the sampling period.     

Genotoxicity of recycling electronic waste in Idhna,Hebron District,Palestine

Most Electronic waste (e-waste) ends up in landfills while some is recycled. A major site for e-waste recycling in Palestine is the village of Idhna in the Hebron District and most of this waste originates from Israel. The objective of this study was to evaluate the effects of e-waste on human DNA damage and chromosome breaks. The test sample was 46 non-smoker individuals with direct exposure to e-waste, either employed in the workshops or resident in Idhna. Genotoxicity data were compared with a control sample of sixteen unexposed individuals from Bethlehem and Al-Aizariya (Bethany). DNA damage was evaluated using the Comet assay while chromosome aberrations were tested by using conventional cytogenetic techniques. We noted an average of 4.83 aberration/cell/subject in test samples while in controls the average was 0.75. Chromosome aberration frequency was statistically different between exposed and control samples for total aberrations, for chromatid and chromosome breaks, and for formation of rings but not for dicenterics and tetraploidy. The Comet assay likewise showed that there was significant difference between exposed and control samples for DNA damage (p < 0.05). We therefore recommend measures to mitigate the health impact of e-waste recycling.     

Identification of organic compounds in leachate from a waste tip

Two different types of leachate from a municipal waste tip have been analyzed. The first type of leachate was collected from a waste tip in the acidification stage. The organic load of this leachate was high and consisted mainly of free volatile acids (over 95% of the TOC). Volatile amines and ethanol were also present (0.8 and 0.7% of the TOC respectively). The leachate was extracted with hexane and the extract was analyzed with infrared and nuclear magnetic resonance spectroscopy and a gas chromatograph-mass spectrometer combination. In the extract alcohols, hydrocarbons, esters, terpenes and phthalates have been identified. High molecular weight compounds were present only in a low concentration.The second type of leachate was collected from a waste tip in the methane fermentation stage. The organic load was relatively low. An important part of the organics was identified as high molecular weight compounds. About 32% of the organic carbon consisted of compounds with a molecular weight over 1000. Acids, amines and alcohols could not be detected. This means that the organic compounds present were end products of degradation processes.Furthermore there was a remarkable difference in heavy metal content between the two types of leachate.     

Impact of cement factory operations on air quality and human health in Ewekoro Local Government Area,South-Western Nigeria

The concentrations of pollutants associated with cement production and the effects on ambient air and community health were assessed in this study. Suspended particulates were monitored using a Negretti 1000^TM air sampler. Additionally, an Ogawa^TM sampler was employed to assess levels of selected gaseous pollutants at selected sites. To collect data on health status, a questionnaire survey was used for selected neighbouring communities and clinic records for industry workers. The data were analysed with the aid of percentage, variation test, correlation and regression statistics. Mean concentrations of particulate matter of 10?μ (74–338?μg/m³) and 2.5?μ (28–116?μg/m³) were significantly higher than permissible limits (50?μg/m³ and 10?μg/m³) within and around the production plant. At all sites, levels of sulphur dioxide (0.1–12?ppb), nitrogen dioxide (0.1–13?ppb) and carbon monoxide (0.1–1.7?ppm) were below the allowable limits for human exposure. Analysis of variance showed significant spatial variations (p?相似文献   

Burden of disease attributable to air pollutants from municipal solid waste incinerators in Seoul, Korea: a source-specific approach for environmental burden of disease

Few studies have attempted to quantify the integrated health burden, incorporating both mortality and morbidity as these factors pertain to air pollutants, on the population in the vicinity of the incinerators. The aims of this study are to estimate the attributable burden of disease caused by incinerators in Seoul, Korea and to present an approach based on source-specific exposure for the estimation of the environmental burden of disease (EBD). With particular attention on the development of a measurement means of the source-specific, exposure-based population attributable fraction (PAF), we integrated air dispersion modeling, Geographic Information Systems (GIS), the population distribution of exposure, and the exposure-response relationship. We then estimated the PAFs caused by additional concentrations of four air pollutants (PM₁₀, NO_2, SO₂, and CO) emitted from four municipal solid waste incinerators (MSWIs) in Seoul in 2007. We, finally, estimated the attributable burden of disease, using the estimated PAF and the disability-adjusted life years (DALY) method developed by the Global Burden of Disease Group of the World Health Organization (WHO).The PAF for NO₂ to all-cause mortality was assessed at approximately 0.02% (95% CI: 0.003-0.036%), which was the highest among all air pollutants. The PAFs for respiratory and cardiovascular disease were 0.12% (95% CI: 0.01-0.16%) and 0.10% (95% CI: 0.04-0.16%), respectively. The sum of the attributable burden of disease for four pollutants was about 297 person-years (PYs) (95% CI: 121-472 PYs) when the incinerators observed to the emission standards. The attributable burdens of respiratory disease and cardiovascular disease were about 0.2% and 0.1%, respectively, of the total burden of respiratory disease and cardiovascular disease of Seoul citizens for the year 2007. Although the air emissions from one risk factor, an incinerator, are small, the burden of disease can be significant to the public health when population exposure is considered.     

Trends in the use of large wood in UK river restoration projects: insights from the National River Restoration Inventory

Large Wood (LW) is increasingly employed in river restoration to promote physical habitat heterogeneity and ecological diversity. To explore how LW has been used in restoration schemes across the United Kingdom in recent decades, we analysed data on 912 LW projects archived in the UK’s National River Restoration Inventory (NRRI). The number of LW schemes has continued to increase following the earliest records in the 1990s, largely tracking overall trends in river restorations. LW projects have been predominantly located in lowland, rural streams, although there has been a notable cluster in and around London. LW projects have mainly revolved around the desire to deliver hydromorphological improvements and specifically the creation of fish habitat. Most schemes used LW in simple deflector forms despite the growing scientific evidence of the benefits of using structurally complex LW. Post project monitoring has been limited and mostly restricted to photographic records. This type of database analysis can provide important insights and help guide future restoration practice.     

Emission factors of gaseous pollutants from recent kerosene space heaters and fuels available in France in 2010

Laboratory measurements of the gaseous emission factors (EF) from two recent kerosene space heaters (wick and injector) with five different fuels have been conducted in an 8-m(3) environmental chamber. The two heaters tested were found to emit mainly CO(2), CO, NO, NO(2), and some volatile organic compounds (VOCs). NO(2) is continuously emitted during use, with an EF of 100-450 μg per g of consumed fuel. CO is normally emitted mainly during the first minutes of use (up to 3 mg/g). Formaldehyde and benzene EFs were quantified at 15 and 16 μg/g, respectively, for the wick heater. Some other VOCs, such as 1,3-butadiene, were detected with lower EFs. We demonstrated the unsuitability of a 'biofuel' containing fatty acid methyl esters for use with the wick heater, and that the accumulation of soot on the same heater, whatever the fuel, leads to a dramatic increase in the CO EF, up to 16 mg/g, which could be responsible for chronic and acute CO intoxications. PRACTICAL IMPLICATIONS: Our results show that in spite of new technologies and emission standards for unvented kerosene space heaters, as well as for the fuels, the use of these heaters in indoor environments still leads to NO(x) levels in excess of current health recommendations. Whereas injection heaters generate more nitrogen oxides than wick heaters, prolonged use of the latter leads to a soot buildup, concomitant with high CO emissions, which could be responsible for acute and chronic intoxications. The use of a biofuel in a wick heater is also of concern. Maintenance of the heaters and adequate ventilation of the room during use of kerosene space heaters are therefore of prime importance to reduce personal exposure.     

Differential management of waste by construction sectors: a case study in Michigan,USA

Waste is a great problem in the world of construction. If dealt with appropriately, there can be many benefits, including lower overall cost, faster production, a higher quality and more sustainable buildings. There are many solutions available for minimizing waste during construction. However, a great amount of waste still exists, whether in residential, commercial, industrial, infrastructural or other constructions. The purpose of this investigation is to ascertain key sources of waste, and whether generation varies with the type and size of the constructors. A sample of 30 general contractors was studied, and several null hypotheses on waste generation and minimization differences among sectors were tested using the Kruskal–Wallis H‐test. Although subtle shifts were observed in the aspects of waste behaviour that seemed predicated on construction sectors and capital base, to some extent the proposition that the construction type and size can influence waste generation and minimization was validated. Based on this study, some solutions are provided as viable avenues to managing and minimizing construction waste across sectors.     

Bioaccumulation of pollutants in the zebra mussel from hazardous industrial waste and evaluation of spatial distribution using GAMs

In the Flix Reservoir (Ebro River, Spain), ca. 300,000 tons of industrial waste were dumped because of the activity of a factory plant in Flix. Within the recovery program implemented, this exceptional situation provides a unique opportunity to test the value of zebra mussel as sentinel organism. Ten metal concentrations were measured in mussels from different sites to assess spatial redistribution of metals and bioavailability to the food web. Our results showed an important metal uptake by mussels; metal concentrations (except As) measured in impacted sites were up to 10 times higher than in control sites, and Mn and Hg exceeded several times the levels previously reported for polluted waters. Concentrations increased downstream showing the metal mobilization from polluted sediments in Flix Reservoir. The higher metal concentrations measured in zebra mussel individuals clearly indicated their bioavailability to the food web, allowing the toxics transfer to predators and occasionally to humans. Thus, zebra mussel is a valuable sentinel organism to identify highly polluted waters, transport routes and trophic transfer.     

Size fractionation of wood extractives, lignin and trace elements in pulp and paper mill wastewater before and after biological treatment

Integrated kraft pulp and paper mill wastewater was characterized before (influent) and after (effluent) the activated sludge process by microfiltration (8, 3, 0.45 and 0.22 μm) and ultrafiltration (100, 50, 30 and 3 kDa) into different size fractions. Wood extractives, lignin, suspended solids and certain trace elements were determined in each fraction. Forty four percent of the resin and fatty acids in the influent (12.8 mg/L) occurred in particles (>0.45 μm), 20% as colloids (0.45 μm-3 kDa) and 36% in the <3 kDa fraction. The corresponding values for sterols (1.5 mg/L) were 5, 46 and 49%. In the effluent, resin and fatty acids (1.45 mg/L) and sterols (0.26 mg/L) were mainly present in the <3 kDa fraction, as well as a small proportion in particles. β-sitosterol was present in particles in the effluent (88 ± 50 μg/L). Lignin in the influent was mainly in the colloidal and <3 kDa fractions, whereas in the effluent it was mainly in the <3 kDa fraction. Thus the decrease of lignin in the biological treatment was concentrated on the colloidal fraction. In the influent, Mn, Zn and Si were mainly present in the <3 kDa fraction, whereas a significant proportion of Fe and Al were found also in the particle and colloidal fractions. In the effluent, Fe and Al were mainly present in the colloidal fraction; in contrast, Mn, Zn and Si were mainly in the <3 kDa fraction. The results indicated that the release of certain compounds and elements into the environment could be significantly decreased or even prevented simply by employing microfiltration as a final treatment step or by enhancing particle removal in the secondary clarifier.     

Elemental composition and oxidative properties of PM2.5 in Estonia in relation to origin of air masses — results from the ECRHS II in Tartu

Fine particulate matter (PM_2.5) was sampled at an urban background site in Tartu, Estonia over one-year period during the ECRHS II study. The elemental composition of 71 PM_2.5 samples was analyzed for different chemical elements using energy-dispersive X-ray fluorescence spectrometry (ED-XRF). The oxidative activity of 36 samples was assessed by measuring their ability to generate hydroxyl radicals in the presence of hydrogen peroxide.The origin of air masses was determined by computing 96-hour back trajectories of air masses with the HYSPLIT Model. The trajectories of air masses were divided into four sectors according to geographical patterns: “Russia,” “Eastern Europe,” “Western Europe,” and “Scandinavia.”During the study period, approximately 30% of air masses originated from “Scandinavia.” The other three sectors had slightly lower values (between 18 and 22%). In spring, summer, and winter, higher total PM levels originated from air masses from continental areas, namely “Russia” and “Eastern Europe” (18.51 ± 7.33 and 19.96 ± 9.23 µg m^− 3, respectively). In autumn, the PM levels were highest in “Western Europe”. High levels of Fe, Ti, and AlCaSi (Al, Ca, and Si) were also detected in air masses from the Eurasian continent. The oxidative properties were correlated to the origin of air masses. The ⋅OH values were approximately 1.5 times higher when air masses originated from the direction of “Eastern Europe” or “Russia.”The origin of measured particles was evaluated using principal component factor analysis. When comparing the PM_2.5 elemental composition with seasonal variation, factor scores, and other studies, the factors represent: (1) combustion of biomass; (2) crustal dust; (3) traffic; and (4) power plants and industrial processes associated with oil burning.The total PM_2.5 is driven mainly by biomass and industrial combustion (63%) and other unidentified sources (23%). Other sources of PM, such as crustal dust and traffic, contribute a total of 13%.     

Fate of LCFA in the co-digestion of cow manure, food waste and discontinuous addition of oil

Different concentrations of oily waste were added in a discontinuous mode and recurrently to anaerobic continuous stirred tank reactors fed with cow manure and food waste. Four continuous stirred tank reactors were run in parallel. A control reactor (R1) received no additional oil and R2, R3 and R4 received increasing concentrations of oil in two different experimental approaches. First, the lipids composition was forced to change suddenly, in three moments, without changing the total chemical oxygen demand (COD) fed to the reactors. The only long chain fatty acid (LCFA) detected onto the R1 solid matrix was palmitic acid (C16:0). Nevertheless in the solid matrix of R2, R3 and R4 C16:0 and stearic acid were detected. For occasional increase in the oil concentration up to 7.7 gCOD_oil/L_reactor (55% Oil_COD/Total_COD) no statistical differences were detected between the reactors, in terms of methane production, effluent soluble COD, effluent volatile fatty acids and total and volatile solids removal. Therefore this experiment allowed to conclude that cow manure–food waste co-digestion presents sufficient buffer capacity to endure solid-associated LCFA concentration up to 20–25 gCOD-LCFA/kgTS.In a second experiment higher concentrations of oil were added, raising occasionally the concentration in the reactors to 9, 12, 15 and 18 gCOD_oil/L_reactor. All pulses had a positive effect in methane production, with the exception of the highest oil pulse concentration, that persistently impaired the reactor performance. This experiment demonstrates that threshold values for LCFA and C16:0 accumulation onto the solid matrix, of about 180–220 gCOD-LCFA/kgTS and 120–150 gCOD-C16:0/kgTS, should not be surpassed in order to prevent persistent reactor failure, as occurs in some full scale co-digestion plants.