Development of modified in situ gelling oral liquid sustained release formulation of dextromethorphan

Context: Alternative strategies are being employed to develop liquid oral sustained release formulation. These included ion exchange resin, sustained release suspensions and in situ gelling systems. The later mainly utilizes alginate solutions that form gels upon contact with calcium which may be administered separately or included in the alginate solution as citrate complex. This complex liberates calcium in the stomach with subsequent gellation. The formed gel can break after gastric emptying leading to dose dumping.

Objective: Development of modified in situ gelling system which sustain dextromethorphan release in the stomach and intestine.

Methods: Solutions containing alginate with calcium chloride and sodium citrate were initially prepared to select the formulation sustaining the release in the stomach. The best formulation was combined with chitosan. All formulations were characterized with respect to flow, gelling capacity, gelling strength and drug release.

Results: Increasing the concentration of alginate increased the gelling capacity and strength and reduced the rate of drug release in gastric conditions with 2% w/v alginate being the best formulation. However, these formulations failed to sustain the release in the intestinal conditions. Incorporation of chitosan with alginate increased the gelling capacity and strength and reduced the rate of drug release compared to alginate only system. The effect was optimum in formulation containing 1.5% w/v chitosan. The sustained release pattern was maintained both in the gastric and intestinal conditions and was comparable to that obtained from the marketed product.

Conclusion: Alginate-chitosan based in situ gelling system is promising for developing liquid oral sustained release.     

Taste masking of azithromycin by resin complex and sustained release through interpenetrating polymer network with functionalized biopolymers

Abstract

Objective: The objective was to evaluate taste masking of azithromycin (AZI) by ion exchange resins (IERs) and the formation of covalent semi interpenetrating polymer network (IPN) beads using chitosan (CS) and sodium carboxylated agarose (SCAG) for sustained release of drug.

Methods: Methacrylic acid (MAA)-based IERs were prepared by suspension polymerization method. Drug release complexes (DRCs) were prepared by different drug:resin ratios i.e. 1:1, 1:2 and 1:4. The resultant DRCs were characterized using DSC, FTIR, PXRD, in vivo and in vitro taste masking, and in vitro drug release at gastric pH. IPN beads were prepared by entrapping DRCs with bio polymers and cross linked with trisodium citrate (NaCIT), and further cross-linked with glutaraldehyde (GA) for sustained release of AZI.

Results: In vitro and in vivo taste masking studies showed that MD1:4 DRC formulation was optimal. The release of AZI from DRC was found to be very fast at gastric pH i.e. 97.37?±?1.02% within 45?min. The formation of IPN beads was confirmed by FTIR. The release of drug from IPN beads at gastric and intestinal pH was found to be “<28% and <60%”, respectively. The release kinetics showed Fickian diffusion profile for ionically cross-linked beads and zero-order release mechanism for GA cross-linking beads.

Conclusions: DRCs can be effectively used for taste masking and newly formulated IPN beads demonstrated sustained release of AZI.     

Gastrointestinal stability,physicochemical characterization and oral bioavailability of chitosan or its derivative-modified solid lipid nanoparticles loading docetaxel

Abstract

Objective: The purpose of this study was to prepare the positively charged chitosan (CS)- or hydroxypropyl trimethyl ammonium chloride chitosan (HACC)-modified solid lipid nanoparticles (SLNs) loading docetaxel (DTX), and to evaluate their properties in vitro and in vivo.

Methods: The DTX-loaded SLNs (DTX-SLNs) were prepared through an emulsion solvent evaporation method and further modified with CS or HACC (CS-DTX-SLNs or HACC-DTX-SLNs) via noncovalent interactions. The gastrointestinal (GI) stability, dissolution rate, physicochemical properties and cytotoxicities of SLNs were investigated. In addition, the GI mucosa irritation and oral bioavailability of SLNs were also evaluated in rats.

Results: The HACC-DTX-SLNs were highly stable in simulated gastric and intestinal fluids (SGF and SIF). By contrast, the CS-DTX-SLNs were less stable in SIF than in SGF. The drug dissolution remarkably increased when DTX was incorporated into the SLNs, which may be attributed to the change in the crystallinity of DTX and some molecular interactions that occurred between DTX and the carriers. The SLNs showed low toxicity in Caco-2 cells and no GI mucosa irritations were observed in rats. A 2.45-fold increase in the area under the curve of DTX was found in the HACC-DTX-SLN group compared with the DTX group after the modified SLNs were orally administered to rats. However, the oral absorption of DTX-SLN or CS-DTX-SLN group showed no significant difference compared with that of DTX group.

Conclusions: The positively charged HACC-DTX-SLNs with a stable particle size could provide the enhanced oral bioavailability of DTX in rats.     

Photoinduced Electron Transfer to Fulleropyrrolidinium Salts Studied by EPR

Abstract

The photoinduced formation of fullerene anion radicals from mono- and bis-N-methylfulleropyrrolidinium salts in the presence of TiO₂ or triethylamine as electron donating substrates was investigated using in situ EPR spectroscopy in various solvent mixtures. The photoreduction yield and stability of anion radicals generated are affected by the solvent properties, such as relative permittivity and hydrogen bond donation ability.     

Fabrication and characterization of matrix type transdermal patches loaded with tizanidine hydrochloride: potential sustained release delivery system

Abstract

Objective: This study was designed to optimize and develop matrix type transdermal drug delivery system (TDDS) containing tizanidine hydrochloride (TZH) using different polymers by solvent evaporation method.

Significance: A strong need exists for the development of transdermal patch having improved bioavailability at the site of action with fewer side effects at off-target organs.

Methods: The patches were physically characterized by texture analysis (color, flexibility, smoothness, transparency, and homogeneity), in vitro dissolution test and FTIR analysis. Furthermore, functional properties essential for TDDS, in vitro percentage of moisture content, percentage of water uptake, in vitro permeation by following different kinetic models, in vivo drug content estimation and skin irritation were determined using rabbit skin.

Results: The optimized patches were soft, of uniform texture and thickness as well as pliable in nature. Novel transdermal patch showed ideal characteristics in terms of moisture content and water uptake. FTIR analysis confirmed no interaction between TZH and cellulose acetate phthalate (CAP). The patch showed sustained release of the drug which increased the availability of short acting TZH at the site of action. The patch also showed its biocompatibility to the in vivo model of rabbit skin.

Conclusions: The results demonstrated that topically applied transdermal patch will be a potential medicated sustain release patch for muscle pain which will improve patient compliance.     

Complexation as an approach to entrap cationic drugs into cationic nanoparticles administered intranasally for Alzheimer's disease management: preparation and detection in rat brain

Abstract

Objective: Complexation was investigated as an approach to enhance the entrapment of the cationic neurotherapeutic drug, galantamine hydrobromide (GH) into cationic chitosan nanoparticles (CS-NPs) for Alzheimer’s disease management intranasally. Biodegradable CS-NPs were selected due to their low production cost and simple preparation. The effects of complexation on CS-NPs physicochemical properties and uptake in rat brain were examined.

Methods: Placebo CS-NPs were prepared by ionic gelation, and the parameters affecting their physicochemical properties were screened. The complex formed between GH and chitosan was detected by the FT-IR study. GH/chitosan complex nanoparticles (GH-CX-NPs) were prepared by ionic gelation, and characterized in terms of particle size, zeta potential, entrapment efficiency, in vitro release and stability for 4 and 25?°C for 3 months. Both placebo CS-NPs and GH-CX-NPs were visualized by transmission electron microscopy. Rhodamine-labeled GH-CX-NPs were prepared, administered to male Wistar rats intranasally, and their delivery to different brain regions was detected 1?h after administration using fluorescence microscopy and software-aided image processing.

Results: Optimized placebo CS-NPs and GH-CX-NPs had a diameter 182 and 190?nm, and a zeta potential of +40.4 and +31.6?mV, respectively. GH encapsulation efficiency and loading capacity were 23.34 and 9.86%, respectively. GH/chitosan complexation prolonged GH release (58.07%?±?6.67 after 72?h), improved formulation stability at 4?°C in terms of drug leakage and particle size, and showed insignificant effects on the physicochemical properties of the optimized placebo CS-NPs (p?>?0.05). Rhodamine-labeled GH-CX-NPs were detected in the olfactory bulb, hippocampus, orbitofrontal and parietal cortices.

Conclusion: Complexation is a promising approach to enhance the entrapment of cationic GH into the CS-NPs. It has insignificant effect on the physicochemical properties of CS-NPs. GH-CX-NPs were successfully delivered to different brain regions shortly after intranasal administration suggesting their potential as a delivery system for Alzheimer’s disease management.     

Sustained-release from Layered Matrix System Comprising Chitosan and Xanthan Gum

ABSTRACT

Sustained-release tablets of propranolol HCl were prepared by direct compression using chitosan and xanthan gum as matrix materials. The effective prolongation of drug release in acidic environment was achieved for matrix containing chitosan together with xanthan gum which prolonged the drug release more extensive than that containing single polymer. Increasing lactose into matrix could adjust the drug release characteristic by enhancing the drug released. Component containing chitosan and xanthan gum at ratio 1:1 and lactose 75% w/w was selected for preparing the layered matrix by tabletting. Increasing the amount of matrix in barrier or in middle layer resulted in prolongation of drug release. From the investigation of drug release from one planar surface, the lag time for drug release through barrier layer was apparently longer as the amount of barrier was enhanced. Least square fitting the experimental dissolution data to the mathematical expressions (power law, first order, Higuchi's and zero order) was performed to study the drug release mechanism. Layering with polymeric matrix could prolong the drug release and could shift the release pattern approach to zero order. The drug release from chitosan-xanthan gum three-layer tablet was pH dependent due to the difference in charge density in different environmental pH. FT-IR and DSC studies exhibited the charge interaction between of NH₃⁺ of chitosan molecule and COO^? of acetate or pyruvate groups of xanthan gum molecule. The SEM images revealed the formation of the loose membranous but porous film that was due to the gel layer formed by the polymer relaxation upon absorption of dissolution medium. The decreased rate of polymer dissolution resulting from the decreased rate of solvent penetration was accompanied by a decrease in drug diffusion due to ionic interaction between chitosan and xanthan gum. This was suggested that the utilization of chitosan and xanthan gum could give rise to layered matrix tablet exhibiting sustained drug release.     

Development of stable emulsified formulations of Terminalia arjuna for topical application: evaluation of antioxidant activity of final product and molecular docking study

Abstract

Objective: The aim of this work was to develop stable emulsified formulations containing Terminalia arjuna (T. arjuna) extract and to assess antioxidant potential of the final product with in silico molecular screening.

Methods: Terminalia arjuna emulsified formulations were prepared by application of ternary phase diagram design and were evaluated for phytochemical screening, solubility studies, ex vivo permeation study, DPPH free radical scavenging assay, anti-tyrosinase activity, skin irritation, stability studies, molecular docking study, and pharmacophore modeling.

Results: Phytochemical screening resulted in the presence of secondary metabolites. The result of the solubility study exhibited that olive oil, tween 80, and PEG 400 could be the most appropriate combination for preparation of the emulsified system. The ex vivo study showed adequate release from its emulsified formulation. Globule size determination and Zeta potential analysis indicate the stability of the emulsified system. The result of DPPH free radical scavenging activity and anti-tyrosinase activity of the final product were satisfactory. Skin irritation test on albino rats resulted in no allergic dermal effects. All the prepared formulations were found to be stable upon storage for 3?months. Molecular docking resulted in antioxidant potential via tyrosinase inhibitory mechanism mainly by hydrogen bonding interaction with His60B, Glu158B, His208B, Asn205B, Met215B, His42B, and Asn57B whereas ionic interactions by Arg209B and Val218B of tyrosinase. Pharmacophore modeling describes the similarity features with the standard.

Conclusions: The results suggest that developed emulsified formulations with T. arjuna extract for topical application demonstrate interesting attributes to be explored as potential pharmaceutical products.     

Development and in vitro characterization of chitosan-coated polymeric nanoparticles for oral delivery and sustained release of the immunosuppressant drug mycophenolate mofetil

Objective: To develop an oral sustained release formulation of mycophenolate mofetil (MMF) for once-daily dosing, using chitosan-coated polylactic acid (PLA) or poly(lactic-co-glycolic) acid (PLGA) nanoparticles. The role of polymer molecular weight (MW) and drug to polymer ratio in encapsulation efficiency (EE) and release from the nanoparticles was explored in vitro.

Methods: Nanoparticles were prepared by a single emulsion solvent evaporation method where MMF was encapsulated with PLGA or PLA at various polymer MW and drug: polymer ratios. Subsequently, chitosan was added to create coated cationic particles, also at several chitosan MW grades and drug: polymer ratios. All the formulations were evaluated for mean diameter and polydispersity, EE as well as in vitro drug release. Differential scanning calorimetry (DSC), surface morphology, and in vitro mucin binding of the nanoparticles were performed for further characterization.

Results: Two lead formulations comprise MMF: high MW, PLA: medium MW chitosan 1:7:7 (w/w/w), and MMF: high MW, PLGA: high MW chitosan 1:7:7 (w/w/w), which had high EE (94.34% and 75.44%, respectively) and sustained drug release over 12?h with a minimal burst phase. DSC experiments revealed an amorphous form of MMF in the nanoparticle formulations. The surface morphology of the MMF NP showed spherical nanoparticles with minimal visible porosity. The potential for mucoadhesiveness was assessed by changes in zeta potential after incubation of the nanoparticles in mucin.

Conclusion: Two chitosan-coated nanoparticles formulations of MMF had high EE and a desirable sustained drug release profile in the effort to design a once-daily dosage form for MMF.     

Lyophilized insulin nanoparticles prepared from quaternized N-aryl derivatives of chitosan as a new strategy for oral delivery of insulin: in vitro,ex vivo and in vivo characterizations

Objective: The purpose of this research was the development, in vitro, ex vivo and in vivo characterization of lyophilized insulin nanoparticles prepared from quaternized N-aryl derivatives of chitosan.

Methods: Insulin nanoparticles were prepared from methylated N-(4-N,N-dimethylaminobenzyl), methylated N-(4 pyridinyl) and methylated N-(benzyl). Insulin nanoparticles containing non-modified chitosan and also trimethyl chiotsan (TMC) were also prepared as control. The effects of the freeze-drying process on physico-chemical properties of nanoparticles were investigated. The release of insulin from the nanoparticles was studied in vitro. The mechanism of the release of insulin from different types of nanoparticles was determined using curve fitting. The secondary structure of the insulin released from the nanoparticles was analyzed using circular dichroism and the cell cytotoxicity of nanoparticles on a Caco-2 cell line was determined. Ex vivo studies were performed on excised rat jejunum using Frantz diffusion cells. In vivo studies were performed on diabetic male Wistar rats and blood glucose level and insulin serum concentration were determined.

Results: Optimized nanoparticles with proper physico-chemical properties were obtained. The lyophilization process was found to cause a decrease in zeta potential and an increase in PdI as well as and a decrease in entrapment efficiency (EE%) and loading efficiency (LE%) but conservation in size of nanoparticles. Atomic force microscopy (AFM) images showed non-aggregated, stable and spherical to sub-spherical nanoparticles. The in vitro release study revealed higher release rates for lyophilized compared to non-lyophilized nanoparticles. Cytotoxicity studies on Caco-2 cells revealed no significant cytotoxicity for prepared nanoparticles after 3-h post-incubation but did show the concentration-dependent cytotoxicity after 24?h. The percentage of cumulative insulin determined from ex vivo studies was significantly higher in nanoparticles prepared from quaternized aromatic derivatives of chitosan. In vivo data showed significantly higher insulin intestinal absorption in nanoparticles prepared from methylated N-(4-N, N-dimethylaminobenzyl) chitosan nanoparticles compared to trimethyl chitosan.

Conclusion: These data obtained demonstrated that as the result of optimized physico-chemical properties, drug release rate, cytotoxicity profile, ex vivo permeation enhancement and increased in vivo absorption, nanoparticles prepared from N-aryl derivatives of chitosan can be considered as valuable method for the oral delivery of insulin.     

pH-sensitive hydrogels based on semi-interpenetrating network (semi-IPN) of chitosan and polyvinyl pyrrolidone for clarithromycin release

The aim of this study was to develop a pH-sensitive chitosan/polyvinyl pyrrolidone (PVP) based controlled drug release system for clarithromycin. The hydrogels were synthesized by cross-linking chitosan and PVP blend with glutaraldehyde to form a semi-interpenetrating polymer network (semi-IPN). These semi-IPNs were studied for their content uniformity, swelling index (SI), mucoadhesion, wettability, in vitro release and their release kinetics. The hydrogels showed more than 97% content of clarithromycin. These hydrogels showed high swelling and mucoadhesion under acidic conditions. The swelling may be due to the protonation of a primary amino group on chitosan. In acidic condition, chitosan would be ionized, and adhesion could have occurred between the positively charged chitosan and the negatively charged mucus. In the alkaline condition, less swelling and mucoadhesion was noticed. In vitro release study revealed that formulation containing chitosan (2% w/v) and PVP (4% w/v) in the ratio of 21:4 showed complete drug release after 12?h. Release profile showed that all the formulations followed non-Fickian diffusion mechanism. The cross-linking and compatibility of clarithromycin in the formulation was studied by Fourier transform infrared (FTIR) spectroscopic analysis, differential scanning calorimetry (DSC) and powder X-ray diffraction (p-XRD) study, which confirmed proper formation of semi-IPN and stability of clarithromycin in the formulations. The surface morphology of semi-IPN was studied before and after dissolution in simulated gastric fluid (SGF, pH 1.2) which revealed pores formation in membrane after dissolution. The results of study suggest that semi-IPNs of chitosan/PVP are potent candidates for delivery of clarithromycin in acidic environment.     

Preparation of an optimized ciprofloxacin-loaded chitosan nanomicelle with enhanced antibacterial activity

Objective: The objective of this study was to evaluate the effect of lipid structure on physicochemical properties of chitosan-fatty acid nanomicelles and prepare an optimum ciprofloxacin-loaded formulation from these conjugates which could enhance the antibacterial effects of drug against some important pathogens like P. aeruginosa.

Significance: Nowadays, resistance in infectious diseases is a growing worldwide concern. Nanocarriers can increase the therapeutic index and consequently reduce the antibiotic resistance. By site-specific delivery of drug, the adverse effects of broad-spectrum antibiotics such as ciprofloxacin would be reduced.

Methods: Fatty acid grafted chitosan conjugates were synthetized in the presence of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide. The effects of fatty acid type (stearic acid, palmitic acid, and linoleic acid) on physicochemical properties of conjugates were investigated. Ciprofloxacin was encapsulated in nanomicelles by thin film hydration method. Also, the preparation process was optimized with a central composite design. The antibacterial effect of optimum formulation against P. aeruginosa, K. pneumoniae, and S. pneumoniae species was determined.

Results: All conjugates were synthetized with high yield values and the substitution degrees ranged between 2.13 and 35.46%. Ciprofloxacin was successfully encapsulated in nanomicelles. The optimum formulation showed high drug loading (≈?19%), with particle size of about 260?nm and a sustained release profile of ciprofloxacin. The minimum inhibitory concentrations of ciprofloxacin in optimum formulation against P. aeruginosa and K. pneumoniae species were 4 and 2 times lower in comparison with the free drug, respectively.

Conclusions: The antibacterial effect of ciprofloxacin was improved by encapsulation of drug in chitosan nanomicelles.     

Development of electrosprayed artesunate-loaded core–shell nanoparticles

Objective: Artesunate (ART) is proven to have potential anti-proliferative activities, but its instability and poor aqueous solubility limit its application as an anti-cancer drug. The present study was undertaken to develop coaxial electrospraying as a novel technique for fabricating nanoscale drug delivery systems of ART as the core–shell nanostructures.

Methods: The core–shell nanoparticles (NPs) were fabricated with coaxial electrospraying and the formation mechanisms of NPs were examined. The physical solid state and drug–polymer interactions of NPs were characterized by X-ray powder diffraction (XRPD) and Fourier transform infrared (FTIR) spectroscopy. The effects of materials and electrospraying process on the particle size and surface morphology of NPs were investigated by scanning electron microscopy (SEM). The drug release from NPs was determined in vitro by a dialysis method.

Results: The ART/poly(lactic-co-glycolic) acid (PLGA) chitosan (CS) NPs exhibited the mean particle size of 303?±?93?nm and relatively high entrapment efficiency (80.5%). The release pattern showed an initial rapid release within two hours followed by very slow extended release. The release pattern approached the Korsmeyer–Peppas model.

Conclusions: The present results suggest that the core–shell NPs containing PLGA and CS have a potential as carriers in the anticancer drug therapy of ART.     

Sustained-release alginate-chitosan pellets prepared by melt pelletization technique

Context: Alginate-chitosan pellets prepared by extrusion-spheronization technique exhibited fast drug dissolution.

Objective: This study aimed to design sustained-release alginate pellets through rapid in situ matrix coacervation by chitosan during dissolution.

Methods: Pellets made of alginate with chitosan and/or calcium acetate were prepared using solvent-free melt pelletization technique which prevented reaction between processing materials during agglomeration and allowed such reaction to occur only in dissolution phase.

Results: Drug release was retarded in pH 2.2 medium when pellets were formulated with calcium acetate or chitosan till a change in medium pH to 6.8. The sustained-release characteristics of calcium alginate pellets were attributed to pellet dispersion and rapid cross-linking by soluble Ca²⁺ during dissolution. The slow drug release characteristics of alginate-chitosan pellets were attributed to polyelectrolyte complexation and pellet aggregation into swollen structures with reduced erosion. The drug release was, however, not retarded when both calcium acetate and chitosan coexisted in the same matrix as a result of chitosan shielding of Ca²⁺ to initiate alginate cross-linkages and rapid in situ solvation of calcium acetate induced fast pellet dispersion and chitosan losses from matrix.

Conclusion: Similar to calcium alginate pellets, alginate-chitosan pellets demonstrated sustained drug release property though via different mechanisms. Combination of alginate, chitosan and calcium acetate in the same matrix nevertheless failed to retard drug release via complementary drug release pattern.     

Mucoadhesive nanostructured lipid carriers (NLCs) as potential carriers for improving oral delivery of curcumin

Purpose: To examine effects of polymer types on the mucoadhesive properties of polymer-coated nanostructured lipid carriers (NLCs).

Experiment: Curcumin-loaded NLCs were prepared using a warm microemulsion technique followed by coating particle surface with mucoadhesive polymers: polyethylene glycol400 (PEG400), polyvinyl alcohol (PVA), and chitosan (CS). The physicochemical properties and entrapment efficacy were examined. In vitro mucoadhesive studies were assessed by wash-off test. In addition, the stability of mucoadhesive NLCs in gastrointestinal fluids and the pattern of drug release were also investigated.

Findings: The obtained nanoparticles showed spherical shape with size ranging between 200?nm and 500?nm and zeta potential between ?37 and ?9?mV depending on the type of polymer coating. Up to 80% drug entrapment efficacy was observed. In vitro mucoadhesive studies revealed that PEG-NLCs and PVA-NLCs were adhered strongly to freshly porcine intestinal mucosa, more than 2-fold mucoadhesive compared to CS-NLCs and uncoated-NLCs. The particle size of all polymer-coated NLCs could be maintained in both simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) suggesting good physical stability in physiological fluid. In contrast, uncoated-NLCs showed particle aggregation in SGF. In vitro dissolution studies revealed a fast release characteristic.     

Creatinine-based non-phospholipid vesicular carrier for improved oral bioavailability of Azithromycin

Context: Novel, safe, efficient and cost effective nano-carriers from renewable resources have got greater interest for enhancing solubility and bioavailability of hydrophobic dugs.

Objectives: This study reports the synthesis of a novel biocompatible non-phospholipid human metabolite "Creatinine" based niosomal delivery system for Azithromycin improved oral bioavailability.

Methods: Synthesized surfactant was characterized through spectroscopic and spectrometric techniques and then the potential for niosomal vesicle formation was evaluated using Azithromycin as model drug. Drug loaded vesicles were characterized for size, polydispersity index (PDI), shape, drug encapsulation efficiency (EE), in vitro release and drug–excipient interaction using zetasizer, atomic force microscope (AFM), LC–MS/MS and FTIR. The biocompatibility of surfactant was investigated through cells cytotoxicity, blood hemolysis and acute toxicity. Azithromycin encapsulated in niosomes was investigated for in vivo bioavailability in rabbits.

Results: The vesicles were spherical with 247?±?4.67?nm diameter hosting 73.29?±?3.51% of the drug. Surfactant was nontoxic against cell cultures and caused 5.80?±?0.51% hemolysis at 1000?µg/mL. It was also found safe in mice up to 2.5?g/kg body weight. Synthesized surfactant based niosomal vesicles revealed enhanced oral bioavailability of Azithromycin in rabbits.

Conclusions: The results of the present study confirm that the novel surfactant is highly biocompatible and the niosomal vesicles can be efficiently used for improving the oral bioavailability of poor water soluble drugs.     

Development,optimization, and in vitro characterization of dasatinib-loaded PEG functionalized chitosan capped gold nanoparticles using Box–Behnken experimental design

Objective: The purpose of this research study was to develop, optimize, and characterize dasatinib loaded polyethylene glycol (PEG) stabilized chitosan capped gold nanoparticles (DSB-PEG-Ch-GNPs).

Methods: Gold (III) chloride hydrate was reduced with chitosan and the resulting nanoparticles were coated with thiol-terminated PEG and loaded with dasatinib (DSB). Plackett–Burman design (PBD) followed by Box–Behnken experimental design (BBD) were employed to optimize the process parameters. Polynomial equations, contour, and 3D response surface plots were generated to relate the factors and responses. The optimized DSB-PEG-Ch-GNPs were characterized by FTIR, XRD, HR-SEM, EDX, TEM, SAED, AFM, DLS, and ZP.

Results: The results of the optimized DSB-PEG-Ch-GNPs showed particle size (PS) of 24.39?±?1.82?nm, apparent drug content (ADC) of 72.06?±?0.86%, and zeta potential (ZP) of ?13.91?±?1.21?mV. The responses observed and the predicted values of the optimized process were found to be close. The shape and surface morphology studies showed that the resulting DSB-PEG-Ch-GNPs were spherical and smooth. The stability and in vitro drug release studies confirmed that the optimized formulation was stable at different conditions of storage and exhibited a sustained drug release of the drug of up to 76% in 48?h and followed Korsmeyer–Peppas release kinetic model.

Conclusions: A process for preparing gold nanoparticles using chitosan, anchoring PEG to the particle surface, and entrapping dasatinib in the chitosan-PEG surface corona was optimized.     

Design and In Vitro Evaluation of Polymeric Formulae of Simvastatin for Local Bone Induction

ABSTRACT

Simvastatin (SVS), a cholesterol-lowering drug, has been shown to stimulate bone formation. This study deals with the design and in vitro evaluation of local delivery systems for simvastatin. They are intended to treat bony defects resulting from periodontitis or to induce osteogenesis around the titanium implants. Granules and gels were formulated using bioerodible/biocompatible polymers, namely hydroxypropylmethyl cellulose (H), sodium carboxymethyl cellulose (C), and chitosan (Ch). The in vitro release profiles and kinetics were evaluated and the swelling and/or erosion was monitored. Differential scanning calorimetry (DSC) and infrared (IR) were used to detect any SVS/polymer interactions that may affect drug release. The results revealed variable extents of controlled drug release from the designed formulae depending on the polymer nature. About 50% cumulative SVS was released from both H granules and gel formulae within 24 h and ～66% and ～88% from C granules and gel, respectively. Ch formulae exhibited ～50% release from granules and ～30% from gel.     

Chitosan nanoparticles for the oral delivery of tenofovir disoproxil fumarate: formulation optimization,characterization and ex vivo and in vivo evaluation for uptake mechanism in rats

Objective: Design chitosan based nanoparticles for tenofovir disoproxil fumarate (TDF) with the purpose of enhancing its oral absorption.

Significance: TDF is a prodrug that has limited intestinal absorption because of its susceptibility to gut wall esterases. Hence, design of chitosan based polymeric novel nanocarrier systems can protect TDF from getting metabolized and also enhance the oral absorption.

Methods: The nanoparticles were prepared using the ionic gelation technique. The factors impacting the particle size and entrapment efficiency of the nanoparticles were evaluated using design of experiments approach. The optimized nanoparticles were characterized and evaluated for their ability to protect TDF from esterase metabolism. The nanoparticles were then studied for the involvement of active transport in their uptake during the oral absorption process. Further, in vivo pharmacokinetic studies were carried out for the designed nanoparticles.

Results: The application of design of experiments in the optimization process was useful to determine the critical parameters and evaluate their interaction effects. The optimized nanoparticles had a particle size of 156?±?5?nm with an entrapment efficiency of 48.2?±?1%. The nanoparticles were well characterized and provided metabolic protection for TDF in the presence of intestinal esterases. The nanoparticles were able to increase the AUC of tenofovir by 380%. The active uptake mechanisms mainly involving clathrin-mediated uptake played a key role in increasing the oral absorption of tenofovir.

Conclusions: These results show the ability of the designed chitosan based nanoparticles in enhancing the oral absorption of TDF along the oral route by utilizing the active endocytic uptake pathways.     

Clinical pharmacokinetic study for the effect of glimepiride matrix tablets developed by quality by design concept

Objective: Implementation of a new pharmaceutical technique to improve aqueous solubility and thus dissolution, enhancement of drug permeation, and finally formulation of a controlled release tablet loaded with glimepiride (GLMP).

Significance: Improve GLMP bioavailability and pharmacokinetics in type II diabetic patients.

Methods: Different polymers were used to enhance aqueous GLMP solubility of which a saturated polymeric drug solution was prepared and physically adsorbed onto silica. An experimental design was employed to optimize the formulation parameters affecting the preparation of GLMP matrix tablets. A compatibility study was conducted to study components interactions. Scanning electron microscope (SEM) was performed before and after the tablets were placed in the dissolution medium. An in vivo study in human volunteers was performed with the optimized GLMP tablets, which were compared to pure and marketed drug products.

Results: Enhancement of GLMP aqueous solubility, using the polymeric drug solution technique, by more than 6–7 times when compared with the binary system. All the studied formulation factors significantly affected the studied variables. No significant interaction was detected among components. SEM illustrated the surface and inner tablet structure, and confirmed the drug release which was attributed to diffusion mechanism. The volunteer group administered the optimized GLMP tablet exhibited higher drug plasma concentration (147.4?ng/mL), longer time to reach maximum plasma concentration (4?h) and longer t_1/2 (7.236?h) compared to other groups.

Conclusions: Matrix tablet loaded with a physically modified drug form could represent a key solution for drugs with inconsistent dissolution and absorption profiles.