共查询到20条相似文献,搜索用时 578 毫秒
1.
2.
在复杂的实时系统中,采用传统的前后台单任务控制机制已经不能满足要求。本文将嵌入式操作系统μC/OS-Ⅱ移植到ARM7处理器上,应用于电子材料试验机的下位机软件设计,数据采集部分采用24位的CS5532A/D转换芯片,多任务之间通过消息队列来进行数据传递,提高了系统的实时性,稳定性和抗干扰能力。 相似文献
3.
24位模/数转换器CS5532及其应用 总被引:18,自引:1,他引:17
高明 《仪表技术与传感器》2002,(7):40-42,46
CS5532是一种低噪声24位△-∑型A/D转换器,文中详细阐述了CS5532的结构、组成、功能特点及工作方式,并以高精度称重仪-渗碳液体流量监控仪为例,论述了其在高精度测量方面的具体应用,给出了其与单片机接口的电路原理图和驱动软件程序。 相似文献
4.
基于PIC单片机开发的高精度数据采集器 总被引:1,自引:0,他引:1
介绍利用PIC单片机对24位的△-∑模数转换芯片进行应用而开发的一种通用高精度数据采集器。具体介绍了数据采集器中的A/D转换芯片的工作原理,PIC单片机的通讯模块,实现数据采集工作的相应电路及程序流程图。 相似文献
5.
6.
以MAX111/MAX110为例,分析微机串行口与串行A/D转换芯片之间的数据采集技术。 相似文献
7.
8.
9.
10.
高精度A/D转换器AD7730及其应用 总被引:3,自引:0,他引:3
介绍一种高精度串行A/D转换器AD7730的主要特点、结构和工作原理,讨论了器件的工作时序及应用问题,以及芯片与MCU连接的软件和硬件接口设计。 相似文献
11.
Stress intensity factors for pairs of diametrically opposite radial cracks on the inside of a jacketed pressurized hole in a thick cylinder have been calculated by using finite element technique. Burst tests on thick cylinder rock samples under above conditions have been performed and the KIC values for Antrim Shale and Limestone determined. The method is very convenient for rocks whose samples are often available in form of cylindrical bars drawn as cores from underground drilling. 相似文献
12.
J. Campa-Molina† O. Blanco† A. Correa-Gomez M. Czank‡ & A. G. Castellanos-Guzman 《Journal of microscopy》2002,208(3):201-211
The domain structures of Zn3B7O13Cl, Zn3B7O13Br and Zn3B7O13I boracite single crystals were studied by means of polarized light in conjunction with electron microscopy. Single crystals of the three compositions were grown by chemical transport reactions in closed quartz ampoules, at a temperature of 900 °C and were examined by polarizing optical microscopy (PLM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). For both PLM and SEM, the same as‐grown samples were used without having to resort to metallization of the crystal faces. For TEM the single crystals were crushed and mounted on holey carbon films. Comparative electron microscope images were useful for revealing the domain structure of these ferroelectric/ferroelastic materials previously observed between the crossed polars of an optical microscope. X‐ray diffraction analysis of the pulverized crystals was performed for this triad of halogen boracites containing zinc as a common metal. 相似文献
13.
14.
基于太赫兹光谱的人参和西洋参鉴别 总被引:1,自引:0,他引:1
为了快速区分人参和西洋参,依据两者所含的人参皂苷在太赫兹波段具有不同指纹光谱,提出了一种基于人参皂苷的太赫兹光谱鉴别人参和西洋参的方法。采用MATLAB软件识别人参和西洋参的太赫兹光谱,同时根据太赫兹光谱特征并通过标准的主成分分析(PCA)区分出人参、西洋参。实验结果表明,基于太赫兹光谱的主成分分析可精确区分出人参、西洋参,并且还可以应用于其他类似物质的区分中。 相似文献
15.
R.B. Zipin 《Precision Engineering》1990,12(2)
European manufacturers have proposed a set of surface roughness parameters based on an examination of the variation in slope of the bearing ratio curve of a surface profile. It is shown, that the proposed procedure provides no useful information, and indeed is misleading, since the bearing ratio curve of even a normally-distributed random surface profile exhibits the expected variation in slope when plotted on rectangular coordinates. On the other hand, the desired information is readily obtained by a similar examination of the cumulative height distribution of a surface profile (the unity complement of the bearing ratio) when it is plotted on normal probability coordinates. 相似文献
16.
17.
An Al86 Mn3 Be11 alloy cast into copper mould was subjected to metallographic investigation. The as-cast microstructure consisted of a quasicrystalline icosahedral phase (i-phase), Be4 AlMn phase and, occasionally, a hexagonal phase. Al-rich solid solution represented the dominant phase. The chemical compositions of phases were determined using AES. The composition of the Be4 AlMn slightly deviated from the stoichiometric composition, whereas the composition of the i-phase was approximately Al52 Mn18 Be30 , containing an appreciable amount of Be. The average composition of the hexagonal phase was Al66 Mn21 Be13 . Deep etching and particle extraction provided a deep insight into the three-dimensional morphology of the i-phase and the hexagonal phase, whereas Be4 AlMn was slightly attacked by the etchant. The i-phase was present predominantly in the form of dendrites and a rodlike eutectic phase. The hexagonal phase was primarily in the form of hexagonal platelets, whereas Be4 AlMn was rather irregular in shape. The morphology of the i-phase can be explained by predominant growth in 3-fold directions and the lowest energy of the 5-fold planes, leading to the faceting and adopting a pentagonal dodecahedron shape. The brightnesses of phases in the backscattered electron images were rationalized by determining their backscattering coefficients. TEM investigation showed considerable phason strain in the i-phase, and the polycrystalline nature of the Be4 AlMn phase. 相似文献
18.
Ali Asadi Ali Sadough Vanini Amin Jabbari 《Journal of Mechanical Science and Technology》2011,25(9):2179-2184
Lightweight laminated composites containing a ceramic front layer and a metallic backing layer were used in order to protect
people, moving equipment, and mobile vehicles from high velocity impact and the increased mobility of mobile vehicles. In
this study, by adding10 vol% SiC and 500 ppm MgO nanoscale particles on the microstructure of Al
2
O
3 matrix and applying optimum sintering conditions, ceramic performance against high-speed projectile impact was improved.
To perform this investigation, a number of target samples with two different types of front layers (alumina and Al
2
O
3-SiC-MgO nanocomposite ceramic) were produced. Impact tests were conducted on these samples using 7.62 mm projectiles with a velocity
of 820 ± 15 m/s. The amount of bulge and bending of the backing layer caused by impact tests was measured. The results of
the impact tests on the samples made of Al
2
O
3-SiC-MgO nanocomposite ceramics and alumina were also compared and analyzed. The results indicate that the substitution of Al
2
O
3-SiC-MgO ceramic layer — which is proffered in this paper — instead of pure alumina ceramic layer, decreases the areal-density of
the samples by at least 30% and improves mechanical properties by about a 60% increase in flexural strength and 100% growth
of the energy distribution factor, which impressively increases impact energy absorption. 相似文献
19.
Crack/particle interactions in alumina/silicon carbide nanocomposites have been investigated by scanning electron microscopy and transmission electron microscopy, with cracks induced by Vickers microindentation. Intergranular cracks are frequently deflected into grains by SiC particles on grain boundaries inclined to the average direction of crack propagation. This mechanism is proposed to explain the change in the fracture mode from intergranular fracture for monolithic alumina to predominantly transgranular fracture for the nanocomposites. Neither stress-induced microcracking around SiC particles nor significant crack deflection by intragranular particles was found to occur in the nanocomposites. It is argued that an addition of nanoparticles may not be a promising approach for increasing the toughness of alumina. 相似文献
20.
I. I. Smolyaninov H. Y. Liang C. H. Lee C. C. Davis V. Nagarajan† & R. Ramesh† 《Journal of microscopy》2001,202(1):250-254
Near-field optical second harmonic microscopy has been applied to imaging of the c/a/c/a polydomain structure of epitaxial PbZr x Ti1– x O3 thin films in the 0 < x < 0.4 range. Comparison of the near-field optical images and the results of atomic force microscopy and X-ray diffraction studies show that an optical resolution of the order of 100 nm is achieved. Symmetry properties of the near-field second harmonic signal allow us to obtain good optical contrast between the local second harmonic generation in c- and a-domains. Experimentally measured near-field second harmonic images have been compared with the results of theoretical calculations. Good agreement between theory and experiment is demonstrated. 相似文献