Flexible all-solid-state asymmetric supercapacitor based on three-dimensional MoS2/Ketjen black nanoflower arrays

High electrochemical properties of negative electrode materials are highly desirable for flexible asymmetric supercapacitors (ASCs). Although benefiting from the unique structure and broad operation potential, molybdenum disulfide (MoS₂) has caused concern as a negative electrode material because its low electrochemical stability and poor conductivity hinder the exploitation of its application in flexible ASCs. Here we investigated a facile two-step hydrothermal approach to fabricate MoS₂/Ketjen black (KB) composites on flexible carbon cloth. Following the construction of flower-like MoS₂ on carbon cloth, KB nanospheres were embedded in MoS₂ via a secondary hydrothermal route. The as-prepared MoS₂/KB electrode presents a high capacitance of 429 F g⁻¹ at a current specific of 1 A g¹. In addition, the hybrid ASC device of NiCo₂O₄//MoS₂/KB was built, which delivers a high energy density of 25.7 Wh kg⁻¹ and power density of 16 kW kg⁻¹. These results are ascribed to the favorable structure of MoS₂ and inherently superior conductivity of KB, which improves wettability, structural stability and electronic conductivity. In brief, the proposed all-solid-state ASC device offers potential application in future portable electronics and flexible energy storage devices.     

Electrodeposited nickel nanocone/NiMoO4 nanocomposite designed as superior electrode materials for high performance supercapacitor

A nickel nanocone-modified NiMoO₄ hybrid (NiMoO₄/NNC) on Ni foam (NF) substrate is engineered to enhance the capacitance performance of NiMoO₄ via facile and convenient electrodeposition strategy, followed by hydrothermal method. The presence of nickel nanocone (NNC) increases the density of reaction active sites of NiMoO₄/NNC/NF, which can shorten the charge diffusion pathway and boost ionic/electronic conductivities. As expected, the NiMoO₄/NNC/NF, as a prospective electrode material, presents appreciable electrochemical properties. Remarkably, the NiMoO₄/NNC/NF electrode demonstrates a high specific capacitance of 2813 F g^?1 at 3 A g^?1 and manifests considerable cycling durability with a retention of 94% of the initial capacitance over consecutive 5000 cycles. Furthermore, a NiMoO₄/NNC/NF//AC/NF asymmetric supercapacitor displays a great electrochemical performance by delivering high energy density (43 Wh kg^?1) and power density (821 W kg^?1) as well as notable durableness (10% decay after 5000 cycles). The presented results suggest that NiMoO₄/NNC/NF can be considered as a binder-free electrode for highly stable supercapacitors.     

Rational design of hierarchical core-shell structured CoMoO4@CoS composites on reduced graphene oxide for supercapacitors with enhanced electrochemical performance

Engineering multicomponent active materials as an advanced electrode with the rational designed core-shell structure is an effective way to enhance the electrochemical performances for supercapacitors. Herein, three-dimensional self-supported hierarchical CoMoO₄@CoS core-shell heterostructures supported on reduced graphene oxide/Ni foam have been rationally designed and prepared via a facile approach. The unique structure and the synergistic effects between two different materials, as well as excellent electronic conductivity of the reduced graphene oxide, contribute to the increased electrochemically active site and enhanced capacitance. The core-shell CoMoO₄@CoS composite displays the superior specific capacitance of 3380.3 F g⁻¹ (1 A g⁻¹) in the three-electrode system and 81.1% retention of the initial capacitance even after 6000 cycles. Moreover, an asymmetric device was successfully prepared using CoMoO₄@CoS and activated carbon as positive/negative electrodes. It is worth mentioning that the device delivered the high energy density of 59.2 W h kg⁻¹ at the power density of 799.8 W kg⁻¹ and the excellent cycle performance (about 91.5% capacitance retention over 6000 cycles). These results indicate that the core-shell CoMoO₄@CoS composites offers the novelty strategy for preparation of electrodes for energy conversion and storage devices.     

The P/NiFe doped NiMoO4 micro-pillars arrays for highly active and durable hydrogen/oxygen evolution reaction towards overall water splitting

Water splitting is an efficient strategy to produce purity hydrogen and convert intermittent electricity from renewable wind and solar sources. In this work, dense NiMoO₄ micro-pillars arrays (MPAs) were in-situ grown on nickel foam (NF) through facile hydrothermal method, then the NiMoO₄/NF were converted into NiMoO₄–P/NF and NiFe/NiMoO₄/NF via phosphating and electrodeposition method, respectively. The NiMoO₄–P/NF electrode required small overpotentials of 34 mV@10 mA cm⁻² and 130 mV@100 mA cm⁻² for hydrogen evolution reaction (HER). The NiFe/NiMoO₄/NF electrode exhibited excellent oxygen evolution reaction (OER) activity with overpotentials of 210 mV@10 mA cm⁻² and 300 mV@100 mA cm⁻². The overall water splitting using the anode-cathode couple of NiFe/NiMoO₄/NF||NiMoO₄–P/NF only consumes low voltages of 1.47 V@10 mA cm⁻² for 100 h and 1.66 V@100 mA cm⁻² for 50 h in 1 M KOH. The electronic modification and the well-designed hierarchical structure contribute the high energy-efficient and stabile overall water splitting.     

Facile one pot sonochemical synthesis of CoFe2O4/MWCNTs hybrids with well-dispersed MWCNTs for asymmetric hybrid supercapacitor applications

In this study, a facile sonochemical strategy is used for the fabrication of CoFe₂O₄/MWCNTs hybrids as an electrode material for supercapacitor applications. FE-SEM image demonstrates the uniformly well-distributed MWCNTs as well as porous structures in the prepared CoFe₂O₄/MWCNTs hybrids, suggesting 3D network formation of conductive pathway, which can enhance the charge and mass transport properties between the electrodes and electrolytes during the faradic redox reactions. The as-fabricated CoFe₂O₄/MWCNTs hybrids with the MWCNTs concentration of 15 mg (CFC15) delivers maximum specific capacitance of 390 F g⁻¹ at a current density of 1 mA cm⁻², excellent rate capability (275 F g⁻¹ at 10 mA cm⁻²), and outstanding cycling stability (86.9% capacitance retention after 2000 cycles at 3 mA cm⁻²). Furthermore, the electrochemical performance of the CFC15 is superior to those of pure CoFe₂O₄ and other CoFe₂O₄/MWCNTs hybrids (CFC5, CFC10 and CFC20), indicating well-dispersion MWCNTs and uniform porous structures. Also, as-fabricated asymmetric supercapacitor device using the CoFe₂O₄/MWCNTs hybrids as the positive electrode and activated carbon as the negative electrode materials shows the outstanding supercapacitive performance (high specific capacitance, superior cycling stability and good rate capability) for energy storage devices. It delivers a capacitance value of 81 F g⁻¹ at 3 mA cm⁻², ca. 92% retention of its initial capacitance value after 2000 charge-discharge cycles and excellent energy density (26.67 W h kg⁻¹) at high power density (~319 W kg⁻¹).     

One-pot sonochemical synthesis of hierarchical MnWO4 microflowers as effective electrodes in neutral electrolyte for high performance asymmetric supercapacitors

In this article, manganese tungstate (MnWO₄) microflowers as electrode materials for high performance supercapacitor applications are prepared by a one-pot sonochemical synthesis. The crystalline structure and morphology of MnWO₄ microflowers are characterized through X-ray diffraction, field emission scanning electron microscopy. The electrochemical properties of the MnWO₄ microflowers are investigated using cyclic voltammograms, galvanostatic charge/discharge and electrochemical impedance spectroscopy. The MnWO₄ microflowers as electrode materials possess a maximum specific capacitance of 324 F g⁻¹ at 1 mA cm⁻² in the potential window from 0 to +1 V and an excellent cycling stability of 93% after 8000 cycles at a current density of 3 mA cm⁻². An asymmetric supercapacitor device is fabricated using the MnWO₄ and iron oxide (Fe₃O₄)/multi-wall carbon nanotube as the positive and negative electrode materials, it can be cycled reversibly at a potential window at 1.8 V. The fabricated ASC device can deliver a high energy density of 34 Wh kg⁻¹ at a power density of 500 W kg⁻¹ with cycling stability of 84% capacitance retained after 3000 cycles. The above results demonstrate that MnWO₄ microflowers can be used as promising high capacity electrode materials in neutral electrolyte for high performance supercapacitors.     

Nano-pom-pom multiphasic MoS2 grown on carbonized wood as electrode for efficient hydrogen evolution in acidic and alkaline media

Molybdenum disulfide (MoS₂), attracts great attention in hydrogen evolution reaction (HER) field, however, low catalytic activity sites and poor conductivity still limit its further application. In this study, an efficient hydrogen evolution electrode with nano-pom-pom multiphasic MoS₂ uniformly grew on porous carbonized wood (NP MoS₂/CW) was developed. Interestingly, the nano-pom-pom are stacked from sheets of MoS₂. Fully exposed active edges of nano-pom-pom MoS₂ and high excellent electrical conductivity of carbonized wood enhance collectively electrocatalytic performance for HER. Specifically, the NP MoS₂/CW electrode requires an overpotential of 109.5 mV and 305 mV to achieve the current density of 10 mA cm⁻² and 400 mA cm⁻², respectively (0.5 M H₂SO₄). NP MoS₂/CW has excellent electrocatalytic performance and stability in acidic and alkaline media due to the perfect combination of NP MoS₂ unique nanostructure and the unique properties of CW. Therefore, the present work provides a promising strategy into the rational development and utilization of MoS₂ for the development of hydrogen evolution.     

Layered MoS2–graphene composites for supercapacitor applications with enhanced capacitive performance

Layered molybdenum disulfide (MoS₂)–graphene composite is synthesized by a modified l-cysteine-assisted solution-phase method. The structural characterization of the composites by energy dispersive X-ray analysis, X-ray powder diffraction, Fourier transform infrared spectroscopy, XPS, Raman, and transmission electron microscope indicates that layered MoS₂–graphene coalescing into three-dimensional sphere-like architecture. The electrochemical performances of the composites are evaluated by cyclic voltammogram, galvanostatic charge–discharge and electrochemical impedance spectroscopy. Electrochemical measurements reveal that the maximum specific capacitance of the MoS₂–graphene electrodes reaches up to 243 F g⁻¹ at a discharge current density 1 A g⁻¹. The energy density is 73.5 Wh kg⁻¹ at a power density of 19.8 kW kg⁻¹. The MoS₂–graphene composites electrode shows good long-term cyclic stability (only 7.7% decrease in specific capacitance after 1000 cycles at a current density of 1 A g⁻¹). The enhancement in specific capacitance and cycling stability is believed to be due to the 3D MoS₂–graphene interconnected conductive network which promotes not only efficient charge transport and facilitates the electrolyte diffusion, but also prevents effectively the volume expansion/contraction and aggregation of electroactive materials during charge–discharge process. Taken together, this work indicates MoS₂–graphene composites are promising electrode material for high-performance supercapacitors.     

Easily-prepared bimetallic metal phosphides as high-performance electrode materials for asymmetric supercapacitor and hydrogen evolution reaction

Transition metal phosphides are very attractive because of the remarkable performance in energy storage and conversion. Herein, a series of bimetallic phosphides are synthesized through a one-step solid-state reaction. The obtained bimetallic phosphides show outstanding properties as supercapacitor electrode materials. Results show that the incorporation of secondary metal into phosphides tunes composition, electronic structure and then the electrochemical performance. And electrochemical properties are closely associated with the secondary metal content. Notably, the obtained NiCoP shows the best performance with 2011 F g⁻¹ at 1 A g⁻¹. And an asymmetric supercapacitor (ASC) based on NiCoP shows energy density of 47.6 W h kg⁻¹, along with 90.5% of capacitance maintained after 10000 cycles. In addition, the NiCoP also possesses great performance toward hydrogen evolution reaction (HER), which displays the lowest potential of 0.221 V vs. RHE and 0.173 V vs. RHE at 10 mA cm⁻² in 0.5 M H₂SO₄ as well as 1.0 M KOH, respectively. The excellent properties may result from the enhanced electrical conductivity, synergistic effects among metal elements and the increased local electrical dipole. The regulation of electronic structure through introduction of secondary metal atom sheds considerable light on realization and preparation of the bimetallic transition metal compounds as electrode materials.     

Yuba-like porous carbon microrods derived from celosia cristata for high-performance supercapacitors and efficient oxygen reduction electrocatalysts

Here, a novel yuba-like porous carbon microrod is prepared via a simple and facile strategy by using the fluffy fibers of celosia cristata petals (FCCP) as the raw material. The optimized carbon microrod (FCCP-CM-900) possesses unique yuba-like structure, high specific surface area (1680 m² g⁻¹) and large pore volume (0.98 cm³ g⁻¹), and effective nitrogen (∼4.52 at.%) and oxygen (∼5.49 at.%) doping, which can enhance the wettability and conductivity (7.9 S cm⁻¹). As the electrode material for supercapacitor, FCCP-CM-900-based supercapacitor presents high specific capacitance (314.5 F g⁻¹ at 0.5 A g⁻¹) in 6.0 M KOH aqueous electrolyte. The FCCP-CM-900-based symmetrical supercapacitor displays high energy density (18.6 Wh kg⁻¹ at 233.4 W kg⁻¹) and outstanding cycling stability (98% capacitance retention after 10,000 cycles) in 1.0 M Na₂SO₄ electrolyte. In addition, served as oxygen reduction electrocatalyst, the FCCP-CM-900 also exhibits excellent catalytic activity, good durability, together with high methanol tolerance in alkaline electrolyte, which makes it a highly efficient air cathode material toward zinc–air cell.     

Interconnected NiS-nanosheets@porous carbon derived from Zeolitic-imidazolate frameworks (ZIFs) as electrode materials for high-performance hybrid supercapacitors

Nickel sulfide-based materials have shown great potential for electrode fabrication owing to their high theoretical specific capacitance but poor conductivity and morphological aggregation. A feasible strategy is to design hybrid structure by introducing highly-conductive porous carbon as the supporting matrix. Herein, we synthesized hybrid composites consisting of interconnected NiS-nanosheets and porous carbon (NiS@C) derived from Zeolitic-imidazolate frameworks (ZIFs) using a facile low-temperature water-bath method. When employed as electrode materials, the as-prepared NiS@C nanocomposites present remarkable electrochemical performance owing to the complex effect that is the combined advantages of double-layer capacitor-type porous carbon and pseudocapacitor-type interconnected-NiS nanosheets. Specifically, the NiS@C nanocomposites exhibit a high specific capacitance of 1827 F g⁻¹ at 1 A g⁻¹, and excellent cyclic stability with a capacity retention of 72% at a very high current density of 20 A g⁻¹ after 5000 cycles. Moreover, the fabricated hybrid supercapacitor delivers 21.6 Wh kg⁻¹ at 400 W kg⁻¹ with coulombic efficiency of 93.9%, and reaches 10.8 Wh kg⁻¹ at a high power density of 8000 W kg⁻¹, along with excellent cyclic stability of 84% at 5 A g⁻¹ after 5000 cycles. All results suggest that NiS@C nanocomposites are applicable to high-performance electrodes in hybrid supercapacitors and other energy-storage device applications.     

Hierarchical design of Ni(OH)2/MnMoO4 composite on reduced graphene oxide/Ni foam for high-performances battery-supercapacitors hybrid device

Design and synthesis advanced battery-type electrode materials with outstanding electrical conductivity and remarkable theoretical specific capacity are crucial to enhance the comprehensive performances for battery-supercapacitors (SCs). Herein, Ni(OH)₂/MnMoO₄ composite on reduced graphene oxide/Ni foam (rGO/NF) was successfully fabricated through the hydrothermal method and potentiostatic electrodeposition (Ni(OH)₂/MnMoO₄/rGO/NF). The unique honeycomb structure and the efficient synergistic effects among MnMoO₄ and Ni(OH)₂ of the as-prepared battery type electrode, as well as outstanding electronic conductivity of the reduced graphene oxide, were beneficial to the enhanced electrochemically active sites and increased specific capacity. Ni(OH)₂/MnMoO₄/rGO/NF composite employed for SCs yielded the maximum specific capacity of 1329.1 C g⁻¹ and a superb cycle property of 86.8% during 5000 cycles. Furthermore, the battery-supercapacitor hybrid (BSH) device with the Ni(OH)₂/MnMoO₄/rGO/NF and active carbon (AC) as-prepared samples showed the energy density of 61.4 W h kg⁻¹ at the power density of 428.4 W kg⁻¹. The capacity retention of the as-fabricated hybrid device reached 96.4% over 7000 cycles. Those consequences tested that the Ni(OH)₂/MnMoO₄/rGO/NF composite should be the promising category of battery-type electrodes materials of the next generation energy storage devices for the high-performances SCs.     

Amorphous MoS2 nanosheets on MoO2 films/Mo foil as free-standing electrode for synergetic electrocatalytic hydrogen evolution reaction

A facile oxidation-sulfidation strategy is proposed to fabricate the vertically aligned amorphous MoS₂ nanosheets on MoO₂ films/Mo foil (MF) as free-standing electrode, which features as the integration of three merits (high conductivity, abundant exposures of active sites, and enhanced mass transfer) into one electrode for hydrogen evolution reaction (HER). Density functional theory (DFT) calculations reveal the strong interaction between MoS₂ and MoO₂, which can enhance the intrinsic conductivity with narrow bandgap, and decreases hydrogen adsorption free energy (ΔG_H1 = ~0.06 eV) to facilitate the HER process. Benefiting from the unique hierarchical structure with amorphous MoS₂ nanosheets on conductive MoO₂ films/MF to facilitate the electron/mass transfer by eliminate contact resistance, controllable number of stacking layers and size of MoS₂ slabs to expose more edge sites, the optimal MoS₂/MoO₂/MF exhibits outstanding activity with overpotential of 154 mV at the current density of 10 mA cm⁻², Tafel slope of 52.1 mV dec⁻¹, and robust stability. Furthermore, the intrinsic HER activity (vs. ECSA) on MoS₂/MoO₂/MF is significantly enhanced, which shows 4.5 and 18.6 times higher than those of MoS₂/MF and MoO₂/MF at overpotential of 200 mV, respectively.     

MoS2 supported on hydrogenated TiO2 heterostructure film as photocathode for photoelectrochemical hydrogen production

The substitution of noble metal platinum catalyst is one of the important research contents for sustainable development and is also the key to the practical application of photoelectrochemical (PEC) hydrogen production. In this work, we loaded the 1T-2H mixed phase MoS₂ on the hydrogenated anatase/rutile heterophase TiO₂ (A-H-RTNA) by hydrothermal method to prepare a new MoS₂/A-H-RTNA electrode material. The prepared material exhibited higher carrier density, lower PL intensity and higher conductivity than Pt/A-H-RTNA because 1T-MoS₂ has more active sites and lower charge transfer resistance than Pt. With the bias voltage of −0.4 V, the optimized 16MoS₂/A-H-RTNA as photocathode shows the largest PEC hydrogen production rate of 1840 mmol m⁻² h⁻¹, which is 2.9 and 2.2 times higher than those of A-H-RTNA (625 mmol m⁻² h⁻¹) and Pt/A-H-RTNA (848 mmol m⁻² h⁻¹), respectively. We innovatively used the prepared 16MoS₂/A-H-RTNA film as counter electrode instead of Pt electrode to construct a PEC system without any noble-metal. The result demonstrates that the noble-metal-free MoS₂ loaded on TiO₂ electrode as counter electrode has 75% PEC activity of noble metal Pt electrode. This study develops a PEC method for hydrogen evolution, which no longer depends on precious metal platinum as cathode.     

Interface engineering of NixSy@MoS2 heterostructured nanorods as high-efficient electrocatalysts for water splitting

Robust and low-cost oxygen evolution reaction (OER) electrocatalysts at low overpotentials play an increasingly pivotal role in clean energy storage and conversion systems. The emerging catalyst with core-shell heterostructure has excited the potentiality of non-noble-metal candidates. Herein, in order to enhance the sufficient exposure and utilization of actives sites and accelerate the electron transfer rate of catalyst, Ni_xS_y@MoS₂ core-shell nanorods decorated NiSe₂ framework (Ni_xS_y@MoS₂/NiSe₂) electrocatalyst has been successfully prepared via interface engineering. As expected, the as-prepared catalyst shows an outstanding OER activity with a small overpotential of 360 mV to drive 100 mA cm⁻² and a Tafel slope of 64 mV dec⁻¹. More importantly, a low cell voltage of 1.40 V is achieved for the Ni_xS_y@MoS₂/NiSe₂ based water splitting electrolyzer at 10 mA cm⁻², and it shows negligible decrement after continuous operation for 100 h. Furthermore, density functional theory (DFT) calculations further uncovered the synergetic catalytic effect between the Ni_xS_y@MoS₂ core-shell nanorods and the NiSe₂ framework played a key role in generating more charge carriers and declining the energy barriers in the process of forming intermediates.     

Designing a hierarchical structure of nickel-cobalt-sulfide decorated on electrospun N-doped carbon nanofiber as an efficient electrode material for hybrid supercapacitors

The intent of designing and exploring novel active electrode materials is to enhance the electrochemical performance of supercapacitors. Herein, a hierarchical structure of nickel-cobalt-sulfide nanostructures (NiCo₂S₄) decorated on the electrospun N-doped carbon nanofiber (CNF), NiCo₂S₄@CNF, is manipulated using a one-step and simple hydrothermal approach. The fabricated hierarchical structure of the NiCo₂S₄@CNF is featured by a large surface area and a high porosity that serve as ion diffusion channels. Therefore, it manifests high specific capacitance and specific capacity values of 377.2 C g^?1 and 754.4 F g^?1 at a current density of 1 A g^?1, respectively. Furthermore, a NiCo₂S₄@CNF//CNF hybrid supercapacitor in which a positive electrode of NiCo₂S₄@CNF is assembled with a negative electrode of CNF to estimate the electrochemical performance of the NiCo₂S₄@CNF. As a result, the device has a superior energy density of 65.6 and 52.5 Wh kg^?1 at a power density of 665 and 1313.8 W kg^?1, respectively. Moreover, the device reveals good stability with capacitance retention of 72% after 3000 charge/discharge cycles. These outstanding results enable the designed hierarchical structure of the NiCo₂S₄@CNF to be a promising electrode material for supercapacitors (SCs) applications.     

Co-precipitation synthesis of nickel cobalt hexacyanoferrate for binder-free high-performance supercapacitor electrodes

Prussian blue analogue with a typical metal-organic framework has been widely used as an electrode material in supercapacitor. In this work, nickel cobalt hexacyanoferrate (Ni₂CoHCF) was grown on nickel foam directly using a simple co-precipitation method. The as-prepared Ni₂CoHCF was tested by transmission electron microscope, scanning electron microscope, X-ray diffraction and X-ray electron energy spectrum. The results showed that Ni₂CoHCF has a unique open face-centered cubic structure. The Ni₂CoHCF was used to set an asymmetric supercapacitor directly. A series of electrochemical tests showed that Ni₂CoHCF had an excellent electrochemical performance. The specific capacitance of the supercapacitor was 585 C g⁻¹ (1300.0 F g⁻¹, 162.5 mAh g⁻¹) at the current density of 0.5 A g⁻¹. After 2000 cycles, it still maintained 85.57% of its initial specific capacitance at the current density of 10 A g⁻¹. The energy density was 30.59 Wh kg⁻¹ at the power density of 378.7 W kg⁻¹. The results show that the supercapacitor constructed by Ni₂CoHCF as an electrode material has high-current charge-discharge capacity, high energy density and long cycle life.     

Graphene confined MoS2 particles for accelerated electrocatalytic hydrogen evolution

MoS₂ is a promising noble-metal-free electrocatalyst for the hydrogen evolution reaction. Extensive trials have been carried out to increase its low electrical conductivity and insufficient active sites. Here, a remarkable electrocatalyst for hydrogen evolution is developed based on the in-situ preparation of MoS₂ confined in graphene nanosheets. Graphene effectively controls the growth of MoS₂ and immensely increases the conductivity and structural stability of the composite materials. Remarkably, because of the plentiful active sites, sufficient electrical contact and transport, MoS₂ particles confined in graphene nanosheets exhibit an onset overpotential as small as 32 mV, an overpotential approaching 132 mV at 10 mA cm⁻², and a low Tafel slope of 45 mV dec⁻¹. This work presents a reasonable architecture for practical applications in efficient electrocatalytic H₂ generation.     

Enhanced electrochemical performance of supercapattery derived from sulphur-reduced graphene oxide/cobalt oxide composite and activated carbon from peanut shells

Sulphur-reduced graphene oxide/cobalt oxide composites (RGO-S/Co₃O₄) were successfully synthesized by varying mass loading of Co₃O₄ through a simple hydrothermal method. Structural, morphological, chemical compositional and surface area/pore-size distribution analysis of the materials were obtained by using XRD, Raman spectroscopy, SEM, TEM, EDX, FTIR, XPS and BET techniques, which reveal an effective synthesis of the RGO-S/Co₃O₄ composites. Electrochemical performance of the materials was evaluated using a three- and two-electrode system in 1 M KOH electrolyte. An optimized RGO-S/200 mg Co₃O₄ composite displayed the highest specific capacity of 171.8 mA h g⁻¹ and superior cycling stability of 99.7% for over 5000 cycles at 1 and 5 A g⁻¹, respectively, in a three-electrode system. A fabricated supercapattery device utilizing RGO-S/200 mg Co₃O₄ (positive electrode) and activated carbon from peanut shells (AC-PS) (negative electrode), revealed a high specific energy and power of 45.8 W h kg⁻¹ and 725 W kg⁻¹, respectively, at 1 A g⁻¹. The device retained 83.4% of its initial capacitance for over 10, 000 cycles with a columbic efficiency of 99.5%. Also, a capacitance retention of 71.6% was preserved after being subjected to a voltage holding test of over 150 h at its maximum potential of 1.45 V.     

Formation of ultra-small Mn3O4 nanoparticles trapped in nanochannels of hollow carbon spheres by nanoconfinement with excellent supercapacitor performance

Ultra-small Mn₃O₄ nanoparticles are formed in the shell of hollow carbon spheres (HCSMn₃O₄) via nanoconfinement growth. The HCS with special cylindrical channels (about 2 nm) provides the limited space for growth of Mn₃O₄ nanoparticles and serves as a conductive substrate in electrochemical applications. The unique hollow structure shortens the distance for electrolytes to access Mn₃O₄ during the charging/discharging process. In the hybrid HCS-Mn₃O₄ structure, the interaction between Mn₃O₄ nanoparticles and HCS was enhanced resulting in good conductivity and electrochemical properties. The two-electrode supercapacitor cell composed of HCS-Mn₃O₄ shows high capacitance and energy density. The highest specific capacitance of 430 F g⁻¹ is achieved at a scanning rate of 1 mV s⁻¹ and the largest energy density of 13.5 Wh kg⁻¹ is observed at a power density of 0.3 kW kg⁻¹ by HCS-Mn₃O₄-5 with 93.15% retention after 10,000 cycles in 5 M LiCl. Symmetric HCS-Mn₃O₄-5//HCS-Mn₃O₄-5 shows higher energy density of 22.6 Wh kg⁻¹ at a power density of 0.4 kW kg⁻¹ and power density of 3.3 kW kg⁻¹ at an energy density of 16 Wh kg⁻¹ with 1 M Li₂SO₄. The technique to prepare the HCS-Mn₃O₄ hybrid materials is simple and readily scalable to satisfy industrial demand.